2-53
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •www.dialight.com
2
2 x 5mm Rectangular
®
OptopipeTM
Optical Light Pipe, 2 Array
515-1051
Dimensions in mm [inches]
MicroLED SMT LEDs
for use with 515-1051
PART NO. PAGE #
Recommeded
597-3xx1-2xx 1-21
597-77x1-2xx 1-23 & 1-24
Alternatives
597-3xx1-5xx 1-30
597-77x1-5xx 1-31
LED alternatives may not produce optimum light
output
Solder Pad/Holes layout shown is for single color
LEDs listed under “Recommended” category
Contact factory for other layouts
Features
• Compatible with Dialight’ s 515-1054
• High transmissivity polycarbonate material
• UL94V-0 compliance
• ESD protection (circuit isolation from front panel)
• Wide viewing angle
• Arrays reduce insertion costs
• Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Dialight
Optopipe
Light Pipe Description
This Optopipe™ functions as a through-the-case indicator with the appearance of dual 2 x 5mm rectangular LEDs. It
is held to the PCB by 2 press-fit pins. It can utilize either a single or multi-color SMT LED, and can be used to form longer
arrays with the 515-1054 light pipe. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and
has a 35% oxygen index.
Dialight can provide custom Optopipe™ solutions for your applications.
Operating/Storage Temperature
–30°C to +100°C
NOTE: designed for
post-reflow
PC board insertion.
NEW