LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only LED DISPLAY LTD-5250JG-18J DATA SHEET Rev Description By 01 RDR Original Spec Phanomkorn 02 Change face color from gray to black Phanomkorn - NPPR Original Spec Phanomkorn SPEC. NO.: DATE : DS30-2007-0211 28/Dec /'07 REV. NO. : PART NO.: LTD-5250JG-18J BNS-OD-C131/A4 - PAGE: 0 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only FEATURES 0.52 inch (13.2 mm) DIGIT HEIGHT. CONTINUOUS UNIFORM SEGMENTS. LOW POWER REQUIREMENT. EXCELLENT CHARACTERS APPEARANCE. HIGH BRIGHTNESS & HIGH CONTRAST. WIDE VIEWING ANGLE. SOLID STATE RELIABILITY. CATEGORIZED FOR LUMINOUS INTENSITY. LEAD-FREE PACKAGE(ACCORDING TO ROHS) DESCRIPTION The LTD-5250JG-18J is a 0.52 inch (13.2 mm) digit height dual digit seven-segment display. This device uses AlInGaP Green LED chips, which are made from AlInGaP on a non-transparent GaAs. The display has a black face and white segments. DEVICE PART NO. DESCRIPTION AlInGaP Green Common Anode Rt. Hand Decimal LTD-5250JG-18J PART NO.: LTD-5250JG-18J BNS-OD-C131/A4 PAGE: 1 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PACKAGE DIMENSIONS NOTES: 1. All dimensions are in millimeters. Tolerances are 0.25 mm unless otherwise note. 2. Pin tip's shift tolerance is 0.4 mm. INTERNAL CIRCUIT DIAGRAM PART NO.: LTD-5250JG-18J BNS-OD-C131/A4 PAGE: 2 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PIN CONNECTION No. CONNECTION 1 CATHODE E (DIGIT 1) 2 CATHODE D (DIGIT 1) 3 CATHODE C 4 CATHODE D.P. (DIGIT 1) 5 CATHODE E (DIGIT 2) 6 CATHODE D (DIGIT 2) 7 CATHODE G (DIGIT 2) 8 CATHODE C (DIGIT 2) 9 CATHODE D.P. (DIGIT 2) 10 CATHODE B (DIGIT 2) 11 CATHODE A (DIGIT 2) 12 CATHODE F (DIGIT 2) 13 COMMON ANODE (DIGIT 2) 14 COMMON ANODE (DIGIT 1) 15 CATHODE B (DIGIT 1) 16 CATHODE A (DIGIT 1) 17 CATHODE G (DIGIT 1) 18 CATHODE F (DIGIT 1) PART NO.: LTD-5250JG-18J BNS-OD-C131/A4 (DIGIT 1) PAGE: 3 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ABSOLUTE MAXIMUM RATING AT Ta=25oC PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Segment 70 mW Peak Forward Current Per Segment ( 1/10 Duty Cycle, 0.1ms Pulse Width ) 60 mA 25 0.33 mA mA/ Continuous Forward Current Per Segment Derating Linear From 25 Per Segment Reverse Voltage Per Segment Operating Temperature Range 5 -35 to +105 Storage Temperature Range -35 to +105 V Soldering Conditions: 1/16 inch below seating plane for 3 seconds at 2600C or of temperature unit (during assembly) not over max. temperature rating above. ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION 630 cd IF=1mA p 571 nm IF=20mA Spectral Line Half-Width 15 nm IF=20mA Dominant Wavelength d 572 nm IF=20mA Forward Voltage Per Segment VF 2.05 2.6 V IF=20mA Reverse Current Per Segment IR 100 A VR=5V IV-m 2:1 Average Luminous Intensity IV Peak Emission Wavelength Luminous Intensity Matching Ratio (Similar Light Area) 200 IF=1mA Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L'Eclairage) eye-response curve. PART NO.: LTD-5250JG-18J BNS-OD-C131/A4 PAGE: 4 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTD-5250JG-18J BNS-OD-C131/A4 PAGE: 5 of 5