Varicon(R) Series 7008 - 0.100" Staggered Dual Row FEATURES * Available with or without card guides * Sizes 17, 23, 29, 35, 41 * Wide range of contact terminations * For 116" thick PCB * Polarization insert * Mates with Series 7000 and 7022 Plugs TECHNICAL SPECIFICATIONS Insulator Material: Diallyl phthalate, glass-filled, flame resistant, per MIL-M-14F, Type SDGF. Current Rating: 10 amperes Contact Resistance: 6 milliohms, maximum Contact Material and Plating: Phosphor Bronze per QQ-B-750, Composition A. Gold, 10 microinches minimum, over nickel, 30 to 100 microinches Insertion/Withdrawal Force: 2 to 16 ounces per contact Operating Temperature: -40C to +125C Insulation Resistance: 25,000 megohms, minimum Dielectric Withstanding Voltage: Sea Level: 2000 Volts rms 3.4" Hg: 675 Volts rms ORDERING CODE 00 7008 017 146 001 Number of Contacts 017, 023, 029, 035, 041 Contact Code See table. Variation Code See table. 141 = 60 7001 06 33 P.C. Termination for 1/8" Card 146 = 60 7001 13 13 .078" Base Taper Tab Card Slot Card Guides Code 1/16" Yes No 001 002 156 = 60 7001 18 13 Wire wrapping (.026 x .062 x .600") 163 = 60 7001 19 13 .098" Base Taper Tab w/Wire Hole 165 = 60 7001 20 13 Forked Tail Solder Termination for Bus Line Connection (.056 x .125" Slot) 166 = 60 7001 20 23 Dual Solder Termination for 2 Wires or Bus Line (.056 x .125" Slot) 189 = 60 7004 02 13 Conventional Solder Termination for 3 Wires 6 Connector Description With Guides - for 1/16" Card Without Guides - for 1/16" Card Availability No. of Contacts 17 23 29 35 X X X X X X X X 41 X X Varicon(R) Series 7008 - 0.100" Staggered Dual Row DIMENSIONS: Number of Contacts 17 23 29 35 41 A millimeters (inches) B C D Bottom 1.920 (0.076) 2.520 (0.099) 3.120 (0.123) 3.270 (0.129) 4.320 (0.170) E 1/16" Card 2.134 (0.084) 2.734 (0.108) 3.334 (0.131) 3.934 (0.134) 4.534 (0.179) 2.40 (0.094) 3.00 (0.118) 3.60 (0.142) 4.20 (0.165) 4.80 (0.190) *N-CON = Non-Conductive Chassis (1/16" Clearance Around Contacts) 1.835 (0.072) 2.435 (0.096) 3.035 (0.119) 3.635 (0.143) 4.235 (0.167) .074 (0.003) .074 (0.003) .074 (0.003) .074 (0.003) .074 (0.003) Con. N-Con. .003 L +.010 -.000 .468 (0.018) .468 (0.018) .468 (0.018) .468 (0.018) .468 (0.018) .343 (0.014) .343 (0.014) .343 (0.014) .343 (0.014) .343 (0.014) 1.600 (0.063) 2.200 (0.087) 2.800 (0.110) 3.400 (0.134) 4.000 (0.157) 1.900 (0.075) 2.500 (0.098) 3.100 (0.122) 3.700 (0.146) 4.300 (0.169) G* F .531 (0.021) .531 (0.021) .531 (0.021) .531 (0.021) .531 (0.021) H N* Con. .210 (0.008) .210 (0.008) .210 (0.008) .210 (0.008) .210 (0.008) N-Con.. .148 (0.006) .148 (0.006) .148 (0.006) .148 (0.006) .148 (0.006) CON = Conductive Chassis (1/8" Clearance Around Contacts) P.C. CARD LAYOUT CHASSIS MOUNTING 7