The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz MS-156C Series Halogen Free Overview Developed for inspection of high frequency circuits used in portable terminals.Verification of the circuit performance is accomplished by simply inserting the external plug in the board mounted receptacle.This action re-directs the circuit from normal condition to the plug side. Removing the plug restores circuit to its normal condition. Space-saving design Low profile -1.35 mm protrusion above the board. Lightweight -0.014 g. total weight. Features 1. Low insertion loss 0.15 dB typical at 2.5 GHz (not mated with the plug). 0.2 dB typical at 6 GHz (not mated with the plug). 0.4 dB typical at 11 GHz (not mated with the plug). MS-156C Comparison with the existing MS-156HF 2. Space-saving design MS-156HF 2.3 mm x 2.3 mm occupied board space. 3. Low profile MS-156C Footprint 1.35 mm protrusion above the board. 2.7 2.3 2.3 0.014 g. total weight 2.7 4. Lightweight 5. Durability 100 mating/unmating cycles, with corresponding plug. 27% saving of space 6. Performs over a wide frequency range Packaged on tape-and-reel. Also available with a vacuum pick-up cap over each switch. 15% lower profile 8. RoHS compliant All components and materials comply with the requirements of the EU Directive 2002/95/EC. 9. Halogen Free Chlorine, and bromine are not used in the receptacles. *Definition according to IEC 61249-2-21. Br 900 ppm max., Cl 900 ppm max., and Br + Cl 1500 ppm max. 1.35 7. Board placement with automatic equipment Height 1.6 Applicable frequencies range over a wide band, from DC to 11 GHz. Weight 0.025g 0.014g 44% lighter weight Applications Portable terminals, ETC, notebook computers (Bluetooth), wireless LAN, POS terminals, GPS terminals, PDA, and any small devices requiring verification of antenna/circuit performance. 2008.11 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkmm the products statustoon11 the GHz Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MS-156C SeriesSubminiature Coaxial Switch 1.35 High, DC Specifications Not mated with the plug Mated (MS-156-HRMJ-3) -40c to +85c -40c to +85c 2W 2W DC to 11GHz DC to 8GHz Operating temperature range Rated power Frequency range 1.2 max. (DC to 2.5GHz) V.S.W.R. 1.4 max. (DC to 3.0GHz) 1.3 max. (2.5GHz to 6.0GHz) 1.8 max. (3.0GHz to 8.0GHz) 1.5 max. (6.0GHz to 11.0GHz) 0.15 dB max. (DC to 2.5GHz) Insertion loss 0.5 dB max. (DC to 3.0GHz) 0.2 dB max. (2.5GHz to 6.0GHz) 0.8 dB max. (3.0GHz to 6.0GHz) 0.4 dB max. (6.0GHz to 11.0GHz) 0.9 dB max. (6.0GHz to 8.0GHz) 20 dB min. (DC to 3.0GHz) 15 dB min. (3.0GHz to 6.0GHz) 12 dB min. (6.0GHz to 11.0GHz) Isolation Item Specification Conditions 1. Contact resistance 100 mo max. 100 mA max. 2. Insulation resistance 1000 Mo min. 100 V DC 3. Withstanding voltage No flashover or insulation breakdown 100 V AC / 1 minute Frequency:10 to 55 Hz, single amplitude of 4. Vibration No electrical discontinuity of 1 s or more 5. Shock 0.75 mm, 2 hours in each of the 3 axis. Acceleration of 490 m/s2, 6 ms duration, sine halfwave waveform, 3 cycles in each of the 3 axis 6. Temperature cycle 7. High temperature exposure 8. Low temperature exposure Contact resistance: 100 mo max. Insulation resistance: 10 Mo min. Contact resistance: 100 mo max. Insulation resistance: 10 Mo min. Contact resistance: 100 mo max. Insulation resistance: 10 Mo min. Contact resistance: 100 mo max. 9. Humidity Insulation resistance: 10 Mo min. 10. Durability (mating/un-mating, with corresponding plug) Contact resistance: 100 mo max. Temperature: -55c / +5c to +35c / +85c /+5c to +35c Time: 30 / 5 max. / 30 / 5 max. (Minutes) 50 cycles 96 hours at 85c 96 hours at -55c 96 hours at 402c, and humidity of 90 to 95% 100 cycles Note 1: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials 2 Part Material Finish Remarks Shell Phosphor bronze Gold plated --------------------------- Insulator 6T Nylon --------------------------- UL94HB Common terminal Cu-Ni-Si alloy Selective gold plated --------------------------- Antenna terminal Phosphor bronze Selective gold plated --------------------------- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose representative. MS-156C SeriesSubminiature Coaxial Switch 1.35 mm High, DC sales to 11 GHz BTypical Data NORMALLY CLOSED(N.C) 2.0 0.0 1.9 0.2 0.4 1.8 1.7 0.6 1.6 0.8 1.5 1.0 1.4 1.2 V.S.W.R. 1.3 1.4 1.2 1.6 1.1 1.8 1.0 0 1 2 3 4 5 6 7 8 9 10 Insertion loss [dB] V.S.W.R. [dB] Insertion loss 2.0 11 [GHz] 3.0 0.0 2.8 0.2 2.6 0.4 2.4 0.6 Insertion loss 2.2 0.8 2.0 1.0 1.8 1.2 V.S.W.R. 1.6 1.4 1.4 1.6 1.2 1.8 2.0 8 [GHz] 1.0 0 1 2 3 4 5 6 Insertion loss [dB] V.S.W.R. [dB] NORMALLY OPEN(N.O) 7 ISOLATION 0 5 Isolation [dB] 10 15 20 25 30 I s o l a t i o n 35 40 45 50 0 1 2 3 4 5 6 7 8 9 10 11 [GHz] 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkmm the products statustoon11 the GHz Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MS-156C SeriesSubminiature Coaxial Switch 1.35 High, DC Receptacle 2.3 2.3 CL No. Packaging MS-156C 358-0251-2 10,000 pieces/reel MS-156C(20) 358-0251-2-20 2,000 pieces/reel 1.35 Part Number 0.6 O1.92 A terminal C terminal BCircuit diagram G Mated with the plug(N.O) G G 2-0.6 A B C B C G G G G MS-156C Plug 0.35 G A Plug 0.35 Not mated with the plug(N.C) 2-0.6 2-(1.1) MS-156C BPCB mounting pattern and metal mask dimensions * Request drawing of the specific part for exact dimensions and tolerances. * Specified dimensions must be followed to assure correct board placement and performance. Metal mask dimensions PCB mounting pattern 0.1 thick 2-1 2-0.9 2-0.5 1.9 0.48 1.44 0.3 1.7 0.3 This area must be free of conductive traces and resist field. 4 1.3 0.4 0.48 1.6 2.4 1.16 2.5 2 0.5 0.4 0.5 C 0. 3 2-1.8 2-2.4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose representative. MS-156C SeriesSubminiature Coaxial Switch 1.35 mm High, DC sales to 11 GHz BPrecautions 1. This product is intended to be used for circuit inspection only. Consult us if any other application is considered. 2. Cross-hatched area shown on the PCB mounting pattern must be free of any conducive traces. Placing conductive traces in this area may affect performance and will void product warranties. When the bottom surface of the product (i.e., the shaded area of the specified land dimensions diagram on the previous page) has been processed with a susbtrate copper trace and resist processing, Hirose Electric will not be able to warrant the product. 3. Do not use hand soldering for mounting of MS-156C. Doing so could result in solder and flux wicking to the contact areas. 4. Exercise caution as not to allow any debris to enter the board mounted MS-156C when cutting PCB. Recommended Mounting of MS-156C coaxial switch on the PCB during the manufacturing process MS-156C To avoid contamination when cutting-off, do not place PCB bridge close to the mounted MS-156C. 5. Do not use the washing process. 6. Please refrain from using the product in environments specifically affected by excessive vibration, shock, dust, high humidity, gases, very high temperatures and very low temperatures such as outdoor equipment. It might cause degradation or destruction of the product.Even if it endures during a short time, long time quarification is not quaranteed. 7. For use of this product, be sure to put contact area of plug on position P(P4 full view) perpendicularly. 8. Plugs can be roughly classified to two types. - For mass production line automatic check (Press down type) - For manual check (With retentive lock) : Unable to be used at production line. 9. When automatic inspections are to be performed during the manufacturing operations, request the MS156 plug connector manual for examples of implementation. 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkmm the products statustoon11 the GHz Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MS-156C SeriesSubminiature Coaxial Switch 1.35 High, DC BPackaging Specifications MS-156C D (1.95) C terminal A terminal 12 1.75 2 5.5 A terminal 4 O1.5 4 C terminal D E Unreeling direction E Reel dimentions Unreeling direction 12.4 OR O50 max. 3 O1 Part Number Reel Size Packaging MS-156C R = O380mm 10,000 pieces/reel MS-156C(20) R = O180mm 2,000 pieces/reel BRecommended Temperature Profile 10 sec.max. Temperature (c) 260 230 220 200 180 Using Lead-free Solder paste 150 100 50 q Maximum temperature : 260c w Peak temperature time : 10 sec. max. e 230c min. : 40 sec. max. r 220c min. : 60 sec. to 150 sec. t 180c to 200c : 60 sec. to 120 sec. Metal mask thickness Reflow cycles Time (sec.) 60 sec. to 120 sec. 40 sec.max. 60 sec. to 150 sec. 6 : 0.1 mm : 2 cycles The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose representative. MS-156C SeriesSubminiature Coaxial Switch 1.35 mm High, DC sales to 11 GHz Plugs Press down, right angle 1 20.9 2.9 O6 O4 M8 4C 11.15 O3.2 Part Number CL No. Durability MS-156-C(LP)-1 358-0173-0 10,000 Times Applicable cable: 1.5D-HQEW, 1.5D-QEW (Fujikura Ltd.) Simplified lock, right angle 1.6 O0.5 M8 O7.9 O5.48 O4 4C 1 25.25 8.25 3 10 O3.2 Part Number CL No. Durability MS-156-C(LP)-2 358-0174-3 500 Times Applicable cable: 1.5D-HQEW, 1.5D-QEW (Fujikura Ltd.) SMA Conversion Adapters Simplified lock, straight, short 1/4-36UNS-2A 24.4 8 O8.5 5.2 11.3 O0.5 O5.48 O4.27 1.6 Part Number CL No. Durability MS-156-HRMJ-2 358-0170-2 500 Times Simplified lock, straight, long 32.9 1.6 19.8 8 5.2 O8 .5 O0.5 O5.48 O4.3 12 1/4-36UNS-2A Part Number CL No. Durability MS-156-HRMJ-5 358-0177-1 500 Times 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkmm the products statustoon11 the GHz Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MS-156C SeriesSubminiature Coaxial Switch 1.35 High, DC Press down, with flange, short 28.13 18.63 1 8 2-O2.6 14 O3.4 O5 8.12 O20 1/4-36UNS-2A Part Number CL No. Durability MS-156-HRMJ-3 358-0171-5 10,000 Times Press down, with flange, long 33.01 8 1 23.51 2-O2.6 14 O5 O3.4 13 O20 1/4-36UNS-2A Press down, with flange (Increased self alignment) Part Number CL No. Durability MS-156-HRMJ-14 358-0198-1 10,000 Times 28.13 18.63 1 8 2-O2.6 14 O5.9 O4.3 8.12 O20 1/4-36UNS-2A Part Number CL No. Durability MS-156-HRMJ-6 358-0181-9 10,000 Times Floating 31.06 20.7 2.5 2-O2.6 15 1.45 1/4-36UNS-2A 8 O24 O3.4 20 O10 O5 4.27 Part Number CL No. Durability MS-156-HRMJ-9 358-0180-6 10,000 Times The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose representative. MS-156C SeriesSubminiature Coaxial Switch 1.35 mm High, DC sales to 11 GHz Floating (Self-Pressing) 38.6 13 28.24 2-O2.6 2.5 O3.8 20 O10.3 O5.4 11.75 O2 4 1.45 1/4-36UNS-2A Part Number CL No. Durability MS-156-HRMJ-10 358-0194-0 10,000 Times Floating (Self-Pressing) 39.85 12 2-O2.6 2.5 29.49 O4.3 20 O5.9 O10.3 11.75 O24 3.75 1/4-36UNS-2A Part Number CL No. Durability MS-156-HRMJ-12 358-0196-6 10,000 Times Floating (Self-Pressing) 12 30 2-O2.6 2.5 17.3 O24 3.75 20 M11.9 14.75 O4.3 O11 O5.9 7.3 1/4-36UNS-2A Part Number CL No. Durability MS-156LP-HRMJ-4 358-0205-5 10,000 Times Adapter for plug inspection 16.05 3 8.3 6.3 O2 O6 O9 0.75 1/4-36UNS-2A Part Number CL No. Durability MS-156R-HRMJ-1 358-0188-8 500 Times 9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkmm the products statustoon11 the GHz Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MS-156C SeriesSubminiature Coaxial Switch 1.35 High, DC Adapter for plug inspection 41.9 14.3 13.21 2.54 O2 O5.45 0.75 2 O2 5/8-24NEF-2A 10 Part Number CL No. Durability MS-156R-NJ-1 358-0176-9 500 Times