6W AC-DC Single Output Medical Adaptor GSM06U series Features Applications Universal AC input / Full range Blood glucose meter 2 pole USA plug Blood pressure meter Low leakage current <50A Nebulizer Protections: Short circuit / Overload / Over voltage Inhaler Fully enclosed plastic case Portable medical device Medical safety approved (2 x MOPP between primary to secondary) Class power (without earth pin) No load power consumption <0.3W ErP step2 compliant (level ) Meet EISA 2007 (Energy Independence and Security Act) Optional lock type DC plug 3 years warranty Description GSM06U is a highly reliable, 6W single-output green medical adaptor series. This product is equipped with a 2-pin (no FG) standard US AC power plug, adopting the input range from 85VAC to 264VAC. The entire series supplies different output voltages between 5VDC and 24VDC that can satisfy the demands for various kinds of miniature medical devices. The circuitry design meets the international medical standards (2 x MOPP), having an ultra low leakage current (<50A), fitting the medical devices in direct electrical contact with the patients. With the efficiency up to 82% and the extreme low no-load power consumption below 0.3W, the design of GSM06U observes the latest energy regulation (level ); the supreme feature allows the adaptor to save the energy when it is either under the operating mode or the standby mode. The entire series utilizes the 94V-0 flame retardant plastic case, providing the double insulation that effectively prevents electrical shock. GSM06U is approved with the international medical safety certificates. Model Encoding GSM 06 U 05 - P1J DC plug type { Standard : P1J (without lock) Optional : P2S (lock type) Output voltage US 2 pin AC inlet Output wattage Series name File Name:GSM06U-SPEC 2014-07-28 GSM06U 6W AC-DC Single Output Medical Adaptor series SPECIFICATION GSM06U05-P1J GSM06U06-P1J GSM06U07-P1J GSM06U09-P1J GSM06U12-P1J GSM06U15-P1J GSM06U18-P1J GSM06U24-P1J ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT GSM06U05 Note.2 5V GSM06U06 GSM06U07 GSM06U09 GSM06U12 GSM06U15 GSM06U18 GSM06U24 6V 7.5V 9V 12V 15V 18V 24V 0.25A RATED CURRENT 1.2A 1.0A 0.8A 0.66A 0.5A 0.4A 0.33A CURRENT RANGE 0 ~ 1.2A 0 ~ 1.0A 0 ~ 0.8A 0 ~ 0.66A 0 ~ 0.5A 0 ~ 0.4A 0 ~ 0.33A 0 ~ 0.25A RATED POWER 6W 6W 6W 6W 6W 6W 6W 6W RIPPLE & NOISE (max.) Note.3 50mVp-p 50mVp-p 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 180mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 5.0% 5.0% 5.0% 5.0% 4.0% LINE REGULATION Note.5 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.6 5.0% 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 74% 76% 77% 79% 80% 82% SETUP, RISE, HOLD UP TIME 1000ms, 50ms, 12ms at full load 85 ~ 264VAC 120 ~ 370VDC VOLTAGE RANGE INPUT FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 68% AC CURRENT INRUSH CURRENT (max.) 0.18A / 100VAC LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE (Note. 8) EMC EMISSION MTBF OTHERS CONNECTOR NOTE 74% 30A / 230VAC Touch current < 50A/264VAC >105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed >120% rated output voltage Protection type : Clamp by zener diode 0 ~ +40 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH 0.04% / (0 ~ 40) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes IEC60950-1, ANSI/AAMI ES60601-1-11 approved I/P-O/P:5656VDC I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance to FCC part 15 Class B DIMENSION PACKING PLUG 500Khrs min. MIL-HDBK-217F(25) 32*66*42.5mm (L*W*H) 100g ; 110pcs / 12Kg / CARTON Standard type P1J: 2.1 * 5.5 * 11mm, turning fork type center positive for stock ; Other type available by customer requested CABLE See page3 ; Other type available by customer requested 1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:GSM06U-SPEC 2014-07-28 GSM06U 6W AC-DC Single Output Medical Adaptor Derating Curve series Static Characteristics 100 90 100 LOAD (%) 80 70 LOAD(%) 70 0 10 20 30 40 50 60 50 40 85 Ta () 100 110 135 155 230 264 INPUT VOLTAGE (V) 60Hz Mechanical Specification Plug Assignment Unit:mm Standard plug: P1J 12.7 P1J NAME PLATE 18.2 6.3 1.5 P/N OUTPUT CENTER + Optional lock type plug: P2S 24.2 SWITCHCRAFT S761K plug equivalent UL2468 22AWG 1220 +150/-0mm for 5~9V UL2468 24AWG 1830 +150/-0mm for 12~24V 17.10.5 481 42.51 661 11 C"+" 321 ID 2.1 x OD 5.5 Installation Manual Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html File Name:GSM06U-SPEC 2014-07-28 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Mean Well: GSM06U06-P1J GSM06U05-P1J GSM06U12-P1J GSM06U15-P1J GSM06U07-P1J GSM06U18-P1J GSM06U09P1J GSM06U24-P1J