FODM452, FODM453 5-Pin Mini Flat Package High Speed Transistor Optocoupler Features Description Compact 5-pin mini flat package The FODM452 and FODM453 optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor. The devices are housed in a compact 5-pin mini flat package for optimum mounting density. The FODM453 features a high CMR rating for optimum common mode transient immunity. High speed-1 MBit/s Superior CMR-15kV/s at VCM = 1500V (FODM453) Performance guaranteed over temperature (0-70C) U.L. recognized (File # E90700) VDE0884 recognized (File # 136480) - Ordering option V, e.g., FODM452V 260C reflow capability for Pb-free assembly Applications Line receivers Pulse transformer replacement Output interface to CMOS-LSTTL-TTL Wide bandwidth analog coupling Package Schematic 0.050 (1.27) TYP ANODE 1 SEATING PLANE 0.181 (4.60) 0.165 (4.20) 6 VCC 5 VO Pin 1 CATHODE 3 4 GND 0.159 (4.03) 0.149 (3.80) 0.008 (0.2) TYP 0.094 (2.40) 0.079 (2.00) 0.008 (0.20) 0 (0.00) 0.020 (0.50) 0.011 (0.30) 0.287 (7.30) 0.248 (6.30) Lead Coplanarity : 0.004 (0.10) MAX Note: All dimensions are in inches (millimeters). (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 www.fairchildsemi.com FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler August 2009 Symbol Value Units TSTG Storage Temperature Parameter -40 to +125 C TOPR Operating Temperature -40 to +85 C EMITTER IF (avg) DC/Average Forward Input Current 25 mA IF (pk) Peak Forward Input Current (50% duty cycle, 1ms P.W.) 50 mA Peak Transient Input Current (1s P.W., 300pps) 1.0 A IF (trans) VR Reverse Input Voltage 5 V PD Input Power Dissipation (No derating required over specified operating temp range) 45 mW Average Output Current 8 mA DETECTOR IO (avg) IO (pk) 16 mA VCC Supply Voltage Peak Output Current -0.5 to 30 V VO Output Voltage -0.5 to 20 V PD Output Power Dissipation (No derating required over specified operating temp range) 100 mW (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 www.fairchildsemi.com 2 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Absolute Maximum Ratings (TA = 25C unless otherwise noted) Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Individual Component Characteristics Symbol Parameter Test Conditions Min. Typ.* Max. Unit 1.60 1.7 V EMITTER VF Input Forward Voltage IF = 16mA, TA = 25C IF = 16mA BVR VF /TA 1.8 Input Reverse Breakdown Voltage IR = 10A Temperature Coefficient of Forward Voltage IF = 16mA 5.0 -1.8 V Logic High Output Current IF = 0mA, VO = VCC = 5.5V, TA =25C .001 IF = 0 mA, VO = VCC = 15V, TA =25C .001 mV/C DETECTOR IOH IF = 0mA, VO = VCC = 15V 0.5 A 1 50 ICCL Logic Low Supply Current IF = 16mA, VO = Open, VCC = 15V 100 200 A ICCH Logic high supply current IF = 0 mA, VO = Open, VCC = 15V, TA = 25C 0.05 1 A IF = 0mA, VO = Open, VCC = 15V 2 Transfer Characteristics Symbol Parameter Test Conditions Min. Typ.* Max Unit 50 % IF = 16mA, IO = 3mA, VCC = 4.5V, TA =2 5C 0.4 V IF = 16mA, IO = 2.4mA, VCC = 4.5 V 0.5 COUPLED CTR VOL Current Transfer Ratio(1) Logic LOW Output Voltage IF = 16mA, VCC = 4.5V TA = 25C VOL=0.4V 20 VOL=0.5V 15 Switching Characteristics (VCC = 5V) Symbol TPHL TPLH |CMH| |CML| BW Parameter Test Conditions Device Min. Typ.* Max. Unit 0.8 s 1.0 s 0.8 s 1.0 s Propagation Delay Time to Logic LOW RL = 1.9k, IF = 16mA, TA = 25C (Fig. 9) 0.40 Propagation Delay Time to Logic HIGH RL = 1.9k, IF = 16mA, TA = 25C(2) (Fig. 9) 0.35 Common Mode Transient Immunity at Logic HIGH IF = 0mA, VCM = 10VP-P, RL = 1.9k, TA = 25C(3) (Fig. 10) FODM452 5 15 KV/s IF = 0mA, VCM = 1500VP-P, RL = 1.9k TA = 25C(3) (Fig. 10) FODM453 15 40 KV/s Common Mode Transient Immunity at Logic LOW IF = 16mA, VCM = 10VP-P, RL = 1.9k, TA = 25C(3) (Fig. 10) FODM452 5 15 KV/s IF = 16mA, VCM = 1500VP-P, RL = 1.9k, TA = 25C(3) (Fig. 10) FODM453 15 40 KV/s Bandwidth RL = 100 3 MHz RL = 1.9k, IF = 16mA RL = 1.9k, IF = 16mA (2) (2) (2) (Fig. 9) (Fig. 9) Isolation Characteristics Symbol VISO CI-O Characteristics Withstand Insulation Test Voltage Capacitance (Input to Output) Test Conditions RH 50%, TA = 25C, t = 1 min. f = 1MHz (4) Min. (4) Typ.* 3750 Max. Unit VRMS 0.2 pF *All Typicals at TA = 25C (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 www.fairchildsemi.com 3 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Electrical Characteristics (TA = 0 to 70C unless otherwise specified) 2. The 1.9k load represents 1 TTL unit load of 1.6mA and 5.6k pull-up resistor. 3. Common mode transient immunity in logic high level is the maximum tolerable (positive) dVcm /dt on the leading edge of the common mode pulse signal VCM, to assure that the output will remain in a logic high state (i.e., VO > 2.0V). Common mode transient immunity in logic low level is the maximum tolerable (negative) dVcm /dt on the trailing edge of the common mode pulse signal, VCM, to assure that the output will remain in a logic low state (i.e., VO < 0.8V). 4. Device is considered a two terminal device: Pins 1, and 3 are shorted together and Pins 4, 5, and 6 are shorted together. (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 www.fairchildsemi.com 4 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Notes: 1. Current Transfer Ratio is defined as a ratio of output collector current, IO, to the forward LED input current, IF, times 100%. Fig. 1 Input Forward Current vs Forward Voltage Fig. 2 Normalized Current Transfer Ratio vs. Input Current NORMALIZED CURRENT TRANSFER RATIO 100 IF - FORWARD CURRENT (mA) TA = 25C 10 1 0.1 0.01 0.001 1.20 VO = 0.4V VCC = 5V TA = 25C Normalized to IF = 16mA 1.15 1.10 1.05 1.00 0.95 0.90 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1 10 VF - FORWARD CURRENT (mA) I F - INPUT CURRENT (mA) Fig. 4 Logic High Output Current vs. Ambient Temperature 1.6 IOH - LOGIC HIGH OUTPUT CURRENT (nA) NORMALIZED CURRENT TRANSFER RATIO Fig. 3 Normalized Current Transfer Ratio vs. Ambient Temperature IF = 16mA VO = 0.4V VCC = 5V Normalized to TA = 25C 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -40 -20 0 20 40 60 80 VO = VCC = 5V IF = 0V 10 1 0.1 -40 100 -20 0 40 60 80 100 Fig. 6 Propagation Delay vs. Load Resistance Fig. 5 DC and Pulsed Transfer Characteristics 10 14 TA = 25C VCC = 5V tP - PROPAGATION DELAY (s) TA = 25C VCC = 5V 12 IO - OUTPUT CURRENT (mA) 20 TA - TEMPERATURE (C) TA - AMBIENT TEMPERATURE IF = 40mA 35mA 10 30mA 8 25mA 20mA 6 15mA 4 10mA IF = 16mA IF = 10mA tPLH 1 tPHL 5mA 2 0 0 2 4 6 8 10 12 14 0.1 16 1 VO - OUTPUT VOLTAGE (V) (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 2 3 4 5 6 7 8 9 10 RL - LOAD RESISTANCE (k) www.fairchildsemi.com 5 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Typical Performance Curves Fig. 8 Frequency Response Fig. 7 Propagation Delay vs. Ambient Temperature 1400 5 NORMALIZED RESPONSE (dB) tP - PROPAGATION DELAY (ns) IF = 16mA VCC = 5V TA = 25C IF = 16mA VCC = 5V RL = 1.9k 1200 1000 800 600 tPHL 400 tPLH RL = 220 0 RL = 100 -5 RL = 470 -10 RL = 1k 200 -15 0.01 0 -40 -20 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE (C) (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 0.1 1 10 f - FREQUENCY (MHz) www.fairchildsemi.com 6 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Typical Performance Curves (Continued) Noise Shield + 1 6 5 VCC FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Pulse Generator I F tr = 5ns Z O = 50 10% D.C. I/f < 100s +5 V RL VO VO 0.1 F 3 I F Monitor 4 C L = 1.5 F GND Rm IF 0 5V VO 1.5 V 1.5 V VOL TPHL TPLH Fig. 9 Switching Time Test Circuit IF Noise Shield + 1 6 A 5 B VCC +5 V RL VO VO 0.1 F VFF 3 4 GND - VCM + - Pulse Gen VCM 10 V 0V 90% 90% 10% 10% tr tf VO 5V Switch at A : IF = 0 mA VO VOL Switch at A : IF = 16 mA Fig. 10 Common Mode Immunity Test Circuit (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 www.fairchildsemi.com 7 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Footprint Drawing for PCB Layout 0.050 0.050 0.050 (1.27) (1.27) (1.27) 0.024 (0.61) Device `A' Device `B' 0.190 (4.83) 0.310 (7.87) Pin 1 Pin 1 0.060 (1.52) 0.100 (2.54) End Stacking Configuration Dimensions in inches (mm) (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 Unutilized Solder Pad www.fairchildsemi.com 8 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Ordering Information Option Order Entry Identifier (example) R2 FODM452R2 V FODM452V R2V FODM452R2V Description Tape and Reel (2500 per reel) IEC60747-5-2 IEC60747-5-2, Tape and Reel (2500 per reel) Marking Information 1 V 3 M452 2 X YY M 6 4 5 Definitions 1 Fairchild logo 2 Device number 3 IEC60747-5-2 mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 One digit year code, e.g., `7' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 www.fairchildsemi.com 9 8.0 0.1 3.5 0.2 2 0.05 0.3 MAX 4.0 0.1 O1.5 MIN 1.75 0.10 5.5 0.05 12.0 0.3 8.3 0.1 0.1 MAX 5.2 0.2 6.4 0.2 O1.5 + 0.1/-0 User Direction of Feed Note: All dimensions are in millimeters. (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 www.fairchildsemi.com 10 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Carrier Tape Specifications FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler Reflow Profile Temperature (C) TP 260 240 TL 220 200 180 160 140 120 100 80 60 40 20 0 Max. Ramp-up Rate = 3C/S Max. Ramp-down Rate = 6C/S tP Tsmax tL Preheat Area Tsmin ts 120 240 360 Time 25C to Peak Time (seconds) Profile Freature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150C Temperature Max. (Tsmax) 200C Time (tS) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3C/second max. Liquidous Temperature (TL) 217C Time (tL) Maintained Above (TL) 60-150 seconds Peak Body Package Temperature 260C +0C / -5C Time (tP) within 5C of 260C 30 seconds Ramp-down Rate (TP to TL) 6C/second max. Time 25C to Peak Temperature (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 8 minutes max. www.fairchildsemi.com 11 Auto-SPMTM Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM* TM* (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) (R) FAST FastvCoreTM FETBenchTM FlashWriter(R)* FPSTM F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GmaxTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) (R) PDP SPMTM Power-SPMTM PowerTrench(R) PowerXSTM Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM Sync-LockTM (R) * The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM TriFault DetectTM TRUECURRENTTM* SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM XSTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 (c)2003 Fairchild Semiconductor Corporation FODM452, FODM453 Rev. 1.0.3 www.fairchildsemi.com 12 FODM452, FODM453 -- 5-Pin Mini Flat Package High Speed Transistor Optocoupler TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.