107-68138 Packaging Specification 01Sep08 Rev K REC ASSY FOR 2.5 SLIM BATTERY OFF-SET 1. PURPOSE Define the packaging specifiction and packaging method of REC ASSY FOR 2.5 SLIM BATTERY OFF-SET Connector. REC ASSY FOR 2.5 SLIM BATTERY OFF-SET 2. APPLICABLE PRODUCT Product Description Part No. 6318790-1 PLUG ASSY FOR 2.5 SLIM BATTERY OFF-SET DIP TYPE(T1) 1318790-1 PLUG ASSY FOR 2.5 SLIM BATTERY OFF-SET DIP TYPE(T1) 6318792-1 PLUG ASSY FOR 2.5MM PITCH 2ND BATTERY CONNECTOR 1318792-1 PLUG ASSY FOR 2.5MM PITCH 2ND BATTERY CONNECTOR 1-6318792-1 PLUG ASSY FOR 2.5MM PITCH 2ND BATTERY CONNECTOR 1-1318792-1 PLUG ASSY FOR 2.5MM PITCH 2ND BATTERY CONNECTOR 6612413-1 2.5 SLIM BATTERY PLUG ASSY 5P 1612413-1 2.5 SLIM BATTERY PLUG ASSY 5P 1612615-1 2.5 SLIM BATTERY PLUG ASSY 5P 6612615-1 2.5 SLIM BATTERY PLUG ASSY 5P 3. PACKAGING MATERIAL Usage Package INNER Part No. Description Size(LxWxH) 6318792-1 1318792-1 6318790-1 1318790-1 6612413-1 1612413-1 1-1318792-1 1-6318792-1 1612615-1 6612615-1 4-912077-8 TY 2.5 Slim Battery Plug 5P 295x182x14.35 - 11/500 - - 4-912077-9 TY 2.5 Slim Battery Plug 5P 295x182x14.35 11/500 - - - 623281-1 TY FOR 1612615-1 295x182x12.10 - - - 11/500 623280-1 TY FOR 1-1318792-1 295x182x12.75 - - 11/500 - DR CHK APVD Sam Wu Ocean Tang Michelle Peng Tyco Electronics AMP Guangdong Ltd. East Rongqi Road, Ronggui Town, Shunde, Foshan, Guangdong, P.R. China QR-ME-030B * Trademark | Indicates change 1 of 4 LOC FR 107-68138 3. PACKAGING MATERIAL Usage Package Part No. Description 9-912064-3 URETHANE CUSHION 623853-1 MIDDLE 1-623124-0 995250-7 OUTER 280x170x5 3/500 2/500 1-1318792-1 1-6318792-1 1612615-1 6612615-1 3/500 4/500 25W 1.5 M1/500 DESICCANT 10g 2/500 407x457 1/500 302x195x103 1/500 102X51 1/500 INNER BOX TYPE-2 623865-4 6318792-1 1318792-1 TAPE PE BAG 9-912064-2 Size(LxWxH) 6318790-1 1318790-1 6612413-1 1612413-1 INNER LABEL 2-912011-9 CARTON C-5-3/4 411x327x240 1/2000 912065-2 AIR CAP #37 C-5 1100x390x4 1/2000 623865-1 OUTER LABEL 102X102 1/2000 Inner Middle Outer LABEL - 623865-4 623865-1 SEALING - Tape Tape Inner Middle Outer 50 pcs/tray 500 pcs/inner box 2000 pcs/carton 4. PACKAGING QUANTITY QTY 5. PACKING METHOD 5.1. Load connectors qty as 4 all oriented same way into tray. 4TRAY 1-1318792-1/1-6318792-1TRAY Rev K QR-ME-030B 2 of 4 107-68138 5. PACKING METHOD 1612615-1TRAY 5.2. Place another tray onto previous tray with products.and ensure the two trays are justification completely. TRAY, TRAY 5.3. Stack 10 trays with connectors one by one, then put an empty tray. TRAY TRAY 5.4. Wrap 11 stacked with tape. 11TRAY "+" 5.5. Place one stack into the polybag and place two bags of desiccant(1-623124-0) on top of tray & heat-seal it. TRAYTRAY(1-623124-0) 5.5. Set up an inner box. 5.6. Place one piece of foam on the bottom of inner box, and ensure under edge of tray don't pin cushion. TRAY Rev K QR-ME-030B 3 of 4 107-68138 5. PACKING METHOD 5.7. Place trays full of connectors qty as 4 into the inner box and place qty as 3 cushion on the top of tray. 4 TRAY3 TRAY 5.8. Close cover of the inner box, place tape on the middle of three sides. () 5.9. Place an inner label on the middle of cover of box. 5.10. Set up a shipping box.and secure bottom flaps with tape. 5.11. Spread air cap and put into the box, air cap facing down. 5.12. Put 4 inner boxes full of products into the cartion and muffle 4 inner boxes with air cap. 4 5.13. Seal the box with tape. And place product identification label in "product id" marked on box. "PRODUCT ID" Rev K QR-ME-030B 4 of 4