RGL34A thru RGL34K Vishay Semiconductors formerly General Semiconductor Surface Mount Glass Passivated Junction Reverse Voltage Fast Switching Rectifiers *Features d e t n e t a P DO-213AA SOLDERABLE ENDS * Plastic package has Underwriters Laboratories Flammability Classification 94V-0 * For surface mount applications * High temperature metallurgically bonded construction * Cavity-free glass passivated junction * Capable of meeting environmental standards of MIL-S-19500 * Fast switching for high efficiency * High temperature soldering guaranteed: 450C/5 seconds at terminals. Complete device submersible temperature of 260C for 10 seconds in solder bath 1st BAND 2nd BAND D1= 0.066 0.060 (1.676) (1.524) D2 50 to 800V Forward Current 0.5A 0.022 (0.559) 0.016 (0.406) D2 = D1 + 0 - 0.008 (0.20) 0.145 (3.683) 0.131(3.327) Mechanical Data Dimensions in inches and (millimeters) Case: JEDEC DO-213AA, molded plastic over glass body Terminals: Plated terminals, solderable per MIL-STD-750, Method 2026 Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Mounting Position: Any Weight: 0.0014 oz., 0.036 g Packaging codes/options: 33/9K per 13" Reel (8mm tape) 48/2.5K per 7" Reel (8mm tape) 1st band denotes type and polarity 2nd band denotes voltage type *Glass-plastic encapsulation is covered by Patent No. 3,996,602 and brazed-lead assembly to Patent No. 3,930,306 (R) Maximum Ratings & Thermal Characteristics Ratings at 25C ambient temperature unless otherwise specified. Symbol RGL34A RGL34B RGL34D RGL34G RGL34J RGL34K Fast switching device: 1st band is Red Polarity color bands (2nd Band) Gray Red Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 V Maximum RMS voltage VRMS 35 70 140 280 420 560 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 Max. average forward rectified current at TT = 55C IF(AV) 0.5 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 10 A Max. full load reverse current, full cycle average TA = 55C IR(AV) 30 A RJA RJT 150 70 C/W TJ, TSTG -65 to +175 C Maximum thermal resistance (1) (2) Operating junction and storage temperature range Electrical Characteristics Orange Yellow Green Unit Blue V Ratings at 25C ambient temperature unless otherwise specified. Symbol RGL34A RGL34B RGL34D RGL34G RGL34J RGL34K Unit Maximum instantaneous forward voltage at 0.5A VF 1.3 V Maximum DC reverse current at rated DC blocking voltage IR 5.0 50 A Maximum reverse recovery time at IF = 0.5A, IR = 1.0A, Irr = 0.25A trr 150 Typical junction capacitance at 4.0V, 1MHz CJ 4.0 TA = 25C TA = 125C 250 ns pF Notes: (1) Thermal resistance from junction to ambient, 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal Document Number 88698 08-Feb-02 www.vishay.com 1 RGL34A thru RGL34K Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25C unless otherwise noted) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 1 - Forward Current Derating Curve 12 Resistive or Inductive Load Peak Forward Surge Current (A) Average Forward Rectified Current (A) 0.5 0.4 0.3 0.2 0.1 TJ = TJ max. 8.3ms Single Half Sine-Wave (JEDEC Method) 10 8.0 6.0 4.0 2.0 0 0 0 25 50 75 100 125 150 175 1 10 Terminal Temperature (C) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Reverse Characteristics 10 10 TJ = 25C 1 Pulse Width = 300s 1% Duty Cycle 0.1 0.01 0.2 Instantaneous Reverse Current (A) Instantaneous Forward Current (A) 100 Number of Cycles at 60HZ 1 TJ = 100C 0.1 TJ = 25C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage (V) 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 5 - Typical Junction Capacitance 10 Junction Capacitance (pF) TJ = 25C f = 1.0 MHZ Vsig = 50mVp-p 1 1 10 100 Reverse Voltage (V) www.vishay.com 2 Document Number 88698 08-Feb-02