NC7WZ08 — TinyLogic
®
UHS Dual 2-Input AND Gate
©2000 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7WZ08 Rev. 1.11.0
October 2008
NC7WZ08
TinyLogic
®
UHS Dual 2-Input AND Gate
Features
■
Space saving US8 surface mount package
■
MicroPak™ leadless package
■
Ultra High Speed; t
PD
2.5ns Typ. into 50pF at 5V V
CC
■
High Output Drive; ±24mA at 3V V
CC
■
Broad V
CC
Operating Range; 1.65V to 5.5V
■
Matches the performance of LCX when operated at
3.3V V
CC
■
Power down high impedance inputs/output
■
Overvoltage tolerant inputs facilitate 5V to 3V
translation
■
Patented noise/EMI reduction circuitry implemented
General Description
The NC7WZ08 is a dual 2-Input AND Gate from Fair-
child's Ultra High Speed Series of TinyLogic
. The
device is fabricated with advanced CMOS technology to
achieve ultra high speed with high output drive while
maintaining low static power dissipation over a very
broad V
CC
operating range. The device is specified to
operate over the 1.65V to 5.5V V
CC
range. The inputs
and output are high impedance when V
CC
is 0V. Inputs
tolerate voltages up to 7V independent of V
CC
operating
voltage.
Ordering Information
Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.
All packages are lead free per JEDEC: J-STD-020B standard.
Order
Number
Package
Number
Product Code
Top Mark Package Description Supplied As
NC7WZ08K8X MAB08A WZ08 8-Lead US8, JEDEC MO-187,
Variation CA 3.1mm Wide
3k Units on Tape and
Reel
NC7WZ08L8X MAC08A X4 8-Lead MicroPak, 1.6 mm Wide 5k Units on Tape and
Reel
©2000 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7WZ08 Rev. 1.11.0 2
NC7WZ08 — TinyLogic
®
UHS Dual 2-Input AND Gate
Connection Diagram
(
Top View)
Pin One Orientation Diagram
AAA represents Product Code Top Mark – see ordering
code
Note:
Orientation of Top Mark determines Pin One
location. Read the top product code mark left to right,
Pin One is the lower left pin (see diagram).
Pad Assignments for MicroPak
(Top Thru View)
Pin Description
Logic Symbol
IEEE/IEC
Function Table
Y = AB
H
=
HIGH Logic Level
L
=
LOW Logic Level
Pin Names Description
A
n
, B
n
Inputs
Y
n
Output
Inputs Output
AB Y
LL L
LH L
HL L
HH H
©2000 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7WZ08 Rev. 1.11.0 3
NC7WZ08 — TinyLogic
®
UHS Dual 2-Input AND Gate
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Recommended Operating Conditions
(1)
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Note:
1. Unused inputs must be held HIGH or LOW. They may not float.
Symbol Parameter Rating
V
CC
Supply Voltage –0.5V to +7V
V
IN
DC Input Voltage –0.5V to +7V
V
OUT
DC Output Voltage –0.5V to +7V
I
IK
DC Input Diode Current @ V
IN
<
–0.5V –50mA
I
OK
DC Output Diode Current @ V
OUT
<
–0.5V –50mA
I
OUT
DC Output Current ±50mA
I
CC
/I
GND
DC V
CC
/GND Current ±100mA
T
STG
Storage Temperature –65°C to +150°C
T
J
Junction Temperature Under Bias 150°C
T
L
Junction Lead Temperature (Soldering, 10 seconds) 260°C
P
D
Power Dissipation @ +85°C
US8
Micropak-8
245mW
165mW
Symbol Parameter Rating
V
CC
Supply Voltage Operating 1.65V to 5.5V
Supply Voltage Data Retention 1.5V to 5.5V
V
IN
Input Voltage 0V to 5.5V
V
OUT
Output Voltage 0V to V
CC
T
A
Operating Temperature –40°C to +85°C
t
r
, t
f
Input Rise and Fall Time
V
CC
=
1.8V ± 0.15V, 2.5V ± 0.2V 0ns/V to 20ns/V
V
CC
=
3.3V ±0.3V 0ns/V to 10ns/V
V
CC
=
5.0V ±0.5V 0ns/V to 5ns/V
θ
JA
Thermal Resistance
US8
Micropak-8
265°C/W
395°C/W
©2000 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7WZ08 Rev. 1.11.0 4
NC7WZ08 — TinyLogic
®
UHS Dual 2-Input AND Gate
DC Electrical Characteristics
Symbol Parameter V
CC
(V) Conditions
T
A
=
25°C
T
A
=
–40°C
to +85°C
UnitsMin. Typ. Max. Min. Max.
V
IH
HIGH Level
Input Voltage
1.65–1.95 0.75 x V
CC
0.75 x V
CC
V
2.3–5.5 0.7 x V
CC
0.7 x V
CC
V
IL
LOW Level
Input Voltage
1.65–1.95 0.25 x V
CC
0.25 x V
CC
V
2.3–5.5 0.3 x V
CC
0.3 x V
CC
V
OH
HIGH Level
Output Voltage
1.65 V
IN
=
V
IH
I
OH
=
–100µA 1.55 1.65 1.55 V
2.3 2.2 2.3 2.2
3.0 2.9 3.0 2.9
4.5 4.4 4.5 4.4
1.65 I
OH
=
–4mA 1.29 1.52 1.29
2.3 I
OH
=
–8mA 1.9 2.15 1.9
3.0 I
OH
=
–16mA 2.5 2.80 2.4
3.0 I
OH
=
–24mA 2.4 2.68 2.3
4.5 I
OH
=
–32mA 3.9 4.20 3.8
V
OL
LOW Level
Output Voltage
1.65 V
IN
=
V
IL
I
OL
=
100µA 0.0 0.1 0.1 V
2.3 0.0 0.1 0.1
3.0 0.0 0.1 0.1
4.5 0.0 0.1 0.1
1.65 I
OL
=
4mA 0.08 0.24 0.24
2.3 I
OL
=
8mA 0.10 0.3 0.3
3.0 I
OL
=
16mA 0.15 0.4 0.4
3.0 I
OL
=
24mA 0.22 0.55 0.55
4.5 I
OL
=
32mA 0.22 0.55 0.55
I
IN
Input Leakage
Current
0–5.5 V
IN
=
5.5V, GND ±0.1 ±1 µA
I
OFF
Power Off
Leakage
Current
0.0 V
IN
or V
OUT = 5.5V 1 10 µA
ICC Quiescent
Supply Current
1.65–5.5 VIN = 5.5V, GND 1 10 µA
©2000 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7WZ08 Rev. 1.11.0 5
NC7WZ08 — TinyLogic® UHS Dual 2-Input AND Gate
AC Electrical Characteristics
Note:
2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current
consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD
dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICC static)
AC Loading and Waveforms
CL includes load and stray capacitance
Input PRR = 1.0MHz, tw = 500ns
Figure 1. AC Test Circuit
Input = Ac Waveform; tr = tf = 1.8ns;
PRR = 10 MHz; Duty Cycle = 50%
Figure 2. ICCD Test Circuit
Figure 3. AC Waveforms
Symbol Parameter VCC (V) Conditions
TA = +25°C
TA = –40°C
to +85°C
Units
Figure
NumberMin Typ Max Min Max
tPLH, tPHL Propagation Delay 1.8 ± 0.15 CL = 15pF,
RL = 1MΩ
2.0 5.7 10.5 2.0 11.0 ns Figure 1
Figure 3
2.5 ± 0.2 1.0 3.5 5.8 1.0 6.2
3.3 ± 0.3 0.8 2.6 3.9 0.8 4.3
5.0 ± 0.5 0.5 1.9 3.1 0.5 3.3
tPLH, tPHL Propagation Delay 3.3 ± 0.3 CL = 50pF,
RL = 500Ω
1.2 3.2 4.8 1.2 5.2 ns Figure 1
Figure 3
5.0 ± 0.5 0.8 2.5 3.7 0.8 4.0
CIN Input Capacitance 0 2.5 pF
CPD Power Dissipation
Capacitance
3.3 (2) 14.5 pF Figure 2
5.0 19.5
©2000 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7WZ08 Rev. 1.11.0 6
NC7WZ08 — TinyLogic® UHS Dual 2-Input AND Gate
Tape and Reel Specifications
Tape Format for US8
Tape Dimensions inches (millimeters)
Tape Format for MicroPak
Tape Dimensions inches (millimeters)
Package Designator Tape Section Number of Cavities Cavity Status Cover Tape Status
K8X Leader (Start End) 125 (typ.) Empty Sealed
Carrier 3000 Filled Sealed
Trailer (Hub End) 75 (typ.) Empty Sealed
Package Designator Tape Section Number of Cavities Cavity Status Cover Tape Status
L8X Leader (Start End) 125 (typ.) Empty Sealed
Carrier 3000 Filled Sealed
Trailer (Hub End) 75 (typ.) Empty Sealed
©2000 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7WZ08 Rev. 1.11.0 7
NC7WZ08 — TinyLogic® UHS Dual 2-Input AND Gate
Tape and Reel Specifications (Continued)
Reel Dimensions inches (millimeters)
Tape
Size ABCDN W1 W2 W3
8mm 7.0
(177.8)
0.059
(1.50)
0.512
(13.00)
0.795
(20.20)
2.165
(55.00)
0.331 +0.059/–0.000
(8.40 +1.50/–0.00)
0.567
(14.40)
W1 +0.078/–0.039
(W1 +2.00/–1.00)
©2000 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7WZ08 Rev. 1.11.0 8
NC7WZ08 — TinyLogic® UHS Dual 2-Input AND Gate
Physical Dimensions
Figure 4. 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
0.30 TYP
SEATING PLANE
0.10-0.18
0.13 A B C
C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH,
D. DIMENSIONS AND TOLERANCES PER ANSI Y14.5M, 1982.
AND TIE BAR EXTRUSIONS.
MAB08AREVC
0.50TYP
B. DIMENSIONS ARE IN MILLIMETERS.
A. CONFORMS TO JEDEC REGISTRATION MO-187
-C-
0.17-0.27
0.10
0.00
DETAIL A
0°-8°
0.4 TYP
-B-
0.70±0.10
ALL LEAD TIPS
0.2 C B A
3.1±.1
0.15
PIN #1 IDENT.
0.90 MAX
ALL LEAD TIPS
0.1 C
1.55
8
14
2.3±0.1
5
-A-
0.70
2.70
3.40
1.00
0.5 TYP
DETAIL A
1.80
GAGE PLANE
0.12
©2000 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7WZ08 Rev. 1.11.0 9
NC7WZ08 — TinyLogic® UHS Dual 2-Input AND Gate
Physical Dimensions (Continued)
Figure 5. 8-Lead MicroPak, 1.6 mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions,
specifically the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
©2000 Fairchild Semiconductor Corporation www.fairchildsemi.com
NC7WZ08 Rev. 1.11.0 10
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,andis not
intended to be an exhaustive list of all such trademarks.
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™ *
™
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FlashWriter®*
FPS™
F-PFS™
FRFET®
Global Power ResourceSM
Green FPS™
Green FPS™e-Series™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM™
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW/W/kW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
®
ThePower Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
XS™
*EZSWITCH™ and FlashWriter®are trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDíS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failedapplications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild’s quality standards for handling and storage and provide access to Fairchild’s full range of up-to-date technicalandproduct information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Preliminary Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I37
First Production
NC7WZ08 — TinyLogic® UHS Dual 2-Input AND Gate
