R.49 Taped Loose Fig.1 X1 CLASS (IEC 60384-14) - MKP Series Fig.2 metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Typical applications: interference suppression and acrossthe-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. Class X1 shall be applied for permanently connected apparatus. Insulated rigid leads Insulated flexible leads 0.5mm2 Note: Permanently connected apparatus: apparatus which is intended for connection to the mains by a connection which cannot be loosened BY HAND. BY HAND: operation that does not require the use of any object such a tool, coin, etc. PRODUCT CODE: R49 Note: R.49 series has replaced the 1.58 series (available upon request). For new design we suggest the use of the R.49 series. O d 0.05 p 15 22.5 p 27.5 p = 37.5 0.6 or 0.8* 0.8 1.0 *See size table. All dimensions are in mm. GENERAL TECHNICAL DATA Dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. 10.0 15.0 15.0 22.5 27.5 37.5 B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 All <7.5 7.5 All All All H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 Damp heat, steady state: Leads: tinned wire. Test conditions Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Temperature: Relative humidity (RH): Test duration: Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Operating temperature range: -40 to +110C IEC 60384-14, EN 60384-14. electrical characteristics Rated voltage (VR): 310Vac / 800Vdc; (50/60Hz) 330Vac / 800Vdc; (50/60Hz) Capacitance range: 0.01F to 6.8F Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M); Tolerance 5% (J) available upon request. Dissipation factor (DF): tgx10-4 at +25C 5C: 10 (6)* at 1kHz* Typical value Insulation resistance: Temperature: Voltage charge time: Voltage charge: +25C5C 1 min 100 Vdc Performance 1x105 M (5x105 M )* 30000 s (150000 s )* for C0.33F for C>0.33F +40C2C 93% 2% 56 days Performance Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Climatic category: 40/110/56 IEC 60068-1 Test conditions Maximum dimensions (mm) B max H max L max test method and performance Winding: non-inductive type. Related documents: Pitch Box thickness (B) (mm) (mm) Endurance: Test conditions Temperature: Test duration: Voltage applied: Performance +110C2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260C5C Dipping time (with heat screen):10 s1 s Performance Capacitance change |C/C|: 2% Winding scheme * Typical value Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25C5C single sided metallized polypropylene film 165 09/2008 R.49 X1 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES PRODUCT CODE: R49 Rated Cap. (*) 310 Vac / 800 Vdc Std dimensions B H L Od p Max dv/dt at 440Vdc (V/ s) Rated Cap. (*) Part Number 330 Vac / 800 Vdc Std dimensions B H L Od Max dv/dt at 440Vdc (V/ s) p Part Number 0.010 F 5.0 11.0 13.0 10.0 0.6 600 R49AF 2100 - - 01 - 0.047 F 5.0 11.0 18.0 15.0 0.6 500 R49AI 2470 - - B1 - 0.015 F 5.0 11.0 13.0 10.0 0.6 600 R49AF 2150 - - 01 - 0.068 F 6.0 12.0 18.0 15.0 0.6 500 R49AI 2680 - - B1 0.022 F 6.0 12.0 13.0 10.0 0.6 600 R49AF 2120 - - 01 - 0.068 F 6.0 17.5 18.0 15.0 0.6 500 R49AI 2680 - - A2 - 0.033 F 6.0 12.0 13.0 10.0 0.6 600 R49AF 2330 - - 01 - 0.10 F 6.0 17.5 18.0 15.0 0.6 500 R49AI 3100 - - A2 - 0.010 F 5.0 11.0 18.0 15.0 0.6 500 R49AI 2100 - - 01 - 0.15 F 13.0 12.0 18.0 15.0 0.8 500 R49AI 3150 - - A3 - 0.015 F 5.0 11.0 18.0 15.0 0.6 500 R49AI 2150 - - 01 - 0.15 F 8.5 14.5 18.0 15.0 0.8 500 R49AI 3150 - - B1 M 0.022 F 5.0 11.0 18.0 15.0 0.6 500 R49AI 2220 - - 01 - 0.22 F 10.0 16.0 18.0 15.0 0.8 500 R49AI 3220 - - B2 M 3220 - - B1- 0.033 F 5.0 11.0 18.0 15.0 0.6 500 R49AI 2330 - - 01 - 0.22 F 11.0 19.0 18.0 15.0 0.8 500 R49AI 0.047 F 6.0 12.5 18.0 15.0 0.6 500 R49AI 2470 - - 01 - 0.15 F 6.0 15.0 26.5 22.5 0.8 400 R49AN 3150 - - B1 - 0.068 F 6.0 12.0 18.0 15.0 0.6 500 R49AI 2680 - - M1 -M 0.22 F 7.0 16.0 26.5 22.5 0.8 400 R49AN 3220 - - B1 - 0.068 F 7.5 13.5 18.0 15.0 0.6 500 R49AI 2680 - - 01 - 0.33 F 8.5 17.0 26.5 22.5 0.8 400 R49AN 3330 - - B1 M 0.10 F 7.5 13.5 18.0 15.0 0.6 500 R49AI 3100 - -M1 -M 0.47 F 10.0 18.5 26.5 22.5 0.8 400 R49AN 3470 - - B1 M 0.10 F 8.5 14.5 18.0 15.0 0.6 500 R49AI 3100 - - 01 - 0.68 F 13.0 22.0 26.5 22.5 0.8 400 R49AN 3680 - - B1 M 3150 - - 01 - 0.33 F 9.0 17.0 32.0 27.5 0.8 200 R49AR 3330 - - A1 - 0.15 F 10.0 16.0 18.0 15.0 0.8 500 R49AI 0.10 F 6.0 15.0 26.5 22.5 0.8 400 R49AN 3100 - - 01 0.47 F 11.0 20.0 32.0 27.5 0.8 200 R49AR 3470 - - A1 - 0.15 F 7.0 16.0 26.5 22.5 0.8 400 R49AN 3150 - - 01 0.68 F 11.0 20.0 32.0 27.5 0.8 200 R49AR 3680 - - B1 - 0.22 F 8.5 17.0 26.5 22.5 0.8 400 R49AN 3220 - - 01 0.68 F 13.0 22.0 32.0 27.5 0.8 200 R49AR 3680 - - A1 - 0.8 200 R49AR 4100 - - B1 - 0.33 F 10.0 18.5 26.5 22.5 0.8 400 R49AN 3330 - - 01 1.0 F 13.0 25.0 32.0 27.5 0.47 F 11.0 20.0 26.5 22.5 0.8 400 R49AN 3470 - - 01 1.0 F 14.0 28.0 32.0 27.5 0.8 200 R49AR 4100 - - A1 - 9.0 17.0 32.0 27.5 0.8 200 R49AR 3330 - - 01 1.5 F 14.0 28.0 32.0 27.5 0.8 200 R49AR 4150 - - B1 - 0.8 200 R49AR 4150 - - A1 - 0.33 F 0.47 F 11.0 20.0 32.0 27.5 0.8 200 R49AR 3470 - - 01 1.5 F 18.0 33.0 32.0 27.5 0.68 F 13.0 22.0 32.0 27.5 0.8 200 R49AR 3680 - - 01 2.2 F 18.0 33.0 32.0 27.5 0.8 200 R49AR 4220 - - B1 - 1.0 F 14.0 28.0 32.0 27.5 0.8 200 R49AR 4100 - - 01 2.2 F 22.0 37.0 32.0 27.5 0.8 200 R49AR 4220 - - A1 - 1.5 F 18.0 33.0 32.0 27.5 0.8 200 R49AR 4150 - - 01 3.3 F 22.0 37.0 32.0 27.5 0.8 200 R49AR 4330 - - B1 - R49AR 4220 - - 01 0.68 F 11.0 22.0 41.5 37.5 1.0 100 R49AW 3680 - - B1 - 1.0 F 11.0 22.0 41.5 37.5 1.0 100 R49AW 4100 - - B1 - 1.5 F 13.0 24.0 41.5 37.5 1.0 100 R49AW 4150 - - B1 - 2.2 F 16.0 28.5 41.5 37.5 1.0 100 R49AW 4220 - - B1 - E12 Series available upon request 3.3 F 19.0 32.0 41.5 37.5 1.0 100 R49AW 4330 - - B1 - For "capacitor connected in serial with main line" (two - phase and three - phase net) application, please read the "SHORT GUIDE TO CHOOSE THE RIGHT FILM CAPACITORS" at pag. 152 and contact our Technical Service for choosing the safest solution. 4.7 F 19.0 32.0 41.5 37.5 1.0 100 R49AW 4470 - - B1 - 6.8 F 30.0 45.0 41.5 37.5 1.0 100 R49AW 4680 - - B1 - 2.2 F 22.0 37.0 32.0 27.5 0.8 200 Mechanical version and packaging (Table1) Tolerance: K (10%); M (20%) All dimensions are in mm APPROVALS ENEC IEC 60384-14 Class X1 File No.CA08.00030 UL 1414 (up to 1F, 85C; 250Vac) Across-the-line File No.E97797 Across-the-line certified for Canad UL 1283 (310 Vac) Electromagnetic File No.E85238 Interference Filters CSA - C22.2 No.8 (310 Vac) Electromagnetic Interference File No.E85238 Filters certified for Canada 09/2008 Table 1 Standard packaging style File No.E97797 Taping style Lead length Ordering code P2 (mm) Fig. (No.) Pitch (mm) (Digit 10 to 11) AMMO-PACK AMMO-PACK 12.70 19.05 1 2 10.0/15.0 22.5 DQ DQ REEL O500mm REEL O500mm 12.70 19.05 1 2 10.0/15.0 22.5/27.5 CK CK (mm) CSA - C22.2 No.1 (up to 1F, 85C; 250Vac) Approved according to IEC 60384-14 According to IEC 60065. Mechanical version and packaging (Table1) Tolerance: K (10%); M (20%) Loose, short leads Loose, long leads Loose, long leads Loose, insulated rigid leads Loose, insulated flexible leads 04+2 25-1/+2 30 +5 00 50 40 30+5 51 1505 52 Note: Ammo-pack is the preferred packaging for taped version. 166 R.49+R Loose Capacitors with discharge resistor X1 CLASS (IEC 60384-14) - MKP Series Taped Fig.1 Fig.2 metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES Insulated rigid leads Typical applications: interference suppression and acrossthe-line applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. Class X1 shall be applied for permanently connected apparatus. Insulated flexible leads 0.5mm2 Note: Permanently connected apparatus: apparatus which is intended for connection to the mains by a connection which cannot be loosened BY HAND. BY HAND: operation that does not require the use of any object such a tool, coin, etc. PRODUCT CODE: R49 O d 0.05 p= 27.5 p = 37.5 0.8 1 All dimensions are in mm. Pitch (mm) Box thickness (mm) 27.5 37.5 All All Maximum dimensions (mm) B max H max L max B +0.2 B +0.3 H +0.1 H +0.1 GENERAL TECHNICAL DATA test method and performance Dielectric: polypropylene film. Damp heat, steady state: Plates: metal layer deposited by evaporation under vacuum. Test conditions Winding: non-inductive type. Temperature: Relative humidity (RH): Test duration: Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: Manufacturer's logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/110/56 IEC 60068-1 Performance no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 5% Insulation resistance: 50% of initial limit. Endurance: Test conditions Test conditions Temperature: Test duration: Voltage applied: IEC 60384-14, EN 132400. electrical characteristics Rated voltage (VR): 330Vac; 800Vdc(50/60Hz)* Capacitance range: 0.33F to 6.8F Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). Dissipation factor (DF): tgx10-4 at +25C 5C: 10 (6)* at 1kHz* Typical value Insulation resistance: Temperature: Voltage charge time: Voltage charge: +25C5C 1 min 100 Vdc Performance 1x105 M (5x105 M)* 30000 s (150000 s)* for C0.33F for C>0.33F +40C2C 93% 2% 56 days Dielectric strength: Operating temperature range: -40 to +110C Related documents: L +0.3 L +0.3 Performance +110C2C 1000 h 1.25 x VR +1000Vac 0.1 s/h Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |C/C|: 10% Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260C5C Dipping time (with heat screen):10 s1 s Performance Capacitance change |C/C|: 2% * Typical value Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25C5C 167 09/2008 R.49+R Capacitor with discharge resistor X1 CLASS (IEC 60384-14) - MKP Series metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES PRODUCT CODE: R49 Table 1 Od Max dv/dt at 440Vdc (V/ s) 9.0 17.0 32.0 27.5 0.8 200 R49AR 3330 - - B1 - - 0.47 F 11.0 20.0 32.0 27.5 0.8 200 R49AR 3470 - - B1 - - REEL O500mm 0.68 F 13.0 22.0 32.0 27.5 0.8 200 R49AR 3680 - - B1 - - 1.0 F 13.0 22.0 32.0 27.5 0.8 200 R49AR 4100 - - B1 M - 1.0 F 14.0 28.0 32.0 27.5 0.8 200 R49AR 4100 - - B2 - - Loose, short leads Loose, long leads Loose, long leads 1.5 F 18.0 33.0 32.0 27.5 0.8 200 R49AR 4150 - - B1 M - Rated Cap. (*) 330 Vac / 800 Vdc Std dimensions B 0.33 F H L p Part Number Loose, insulated rigid leads Loose, insulated flexible leads 1.5 F 14.0 28.0 32.0 27.5 0.8 200 R49AR 4150 - - B2 - - 0.8 200 R49AR 4220 - - B1 - - 0.68 F 11.0 22.0 41.5 37.5 1.0 100 R49AW 3680 - - A1 - - 1.0 F 11.0 22.0 41.5 37.5 1.0 100 R49AW 4100 - - B1 - - 1.5 F 13.0 24.0 41.5 37.5 1.0 100 R49AW 4150 - - B1 - - 2.2 F 16.0 28.5 41.5 37.5 1.0 100 R49AW 4220 - - B1 - - 3.3 F 19.0 32.0 41.5 37.5 1.0 100 R49AW 4330 - - B1 - - 1 4.7 F 20.0 40.0 41.5 37.5 1.0 100 R49AW 4470 - - B1 - - 6.8 F 30.0 45.0 41.5 37.5 1.0 100 R49AW 4680 - - B1 - - R 4 9 All dimensions are in mm APPROVALS ENEC IEC 60384-14 Class X1 UL 1283 (310 Vac-105C) Electromagnetic File No.E85238 Interference Filters CSA - C22.2 No.8 (310 Vac-105C) Electromagnetic Interference File No.E85238 Filters certified for Canada Approved according to IEC 60384-14 According to IEC 60065. 09/2008 File No.CA08.00030 Taping style (mm) 2.2 F 22.0 37.0 32.0 27.5 Rated voltage (A=330Vac) Mechanical version and packaging (Table 1) Tolerance: K (10%); M (20%) Value of discharge resistor (Table 2) Lead length Standard packaging style P2 (mm) Fig. (No.) Pitch (mm) 19.05 2 27.5 Ordering code (Digit 10 to 11) CK +2 04 25 -1/+2 30 +5 00 50 40 30 +5 51 150 5 52 Product code system The part number, comprising 15 digits, is formed as follows: 2 3 4 5 6 7 8 9 10 11 12 13 - 14 15 - Digit 1 to 3 Digit 4 Digit 5 Digit 6 to 9 Digit 10 to 11 Digit 12 Digit 13 Digit 14 Digit 15 Series code. a.c. rated voltage: A = 330Vac; Pitch: R = 27.5; W = 37.5 mm Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Mechanical version and/or packaging (table 1) Identifies the dimensions and electrical characteristics. Internal use Capacitance tolerance: K=10%; M=20% Value of the discharge resistor (tolerance10%) according to the following table*: Table 2 R code (-) 470 k E 680 k F 1 M G 1.2 M L 1.5 M N 2.2 M P 3.3 M Q 4.7 M S 6.8 M T 10 M V 168 *Other resistors are avaible upon request.