R49AF2120CK01J - KEMET Electronics Corporation

09/2008

165

GENERAL TECHNICAL DATA

Dielectric: polypropylene lm.

Plates: metal layer deposited by evaporation under vacuum.

Winding: non-inductive type.

Leads: tinned wire.

Protection: plastic case, thermosetting resin lled.

Box material is solvent resistant and ame retardant according to

UL94 V0.

Marking: Manufacturer’s logo, series, capacitance, tolerance,

rated voltage, capacitor class, dielectric code, climatic category,

passive ammability category, manufacturing date code, approvals,

manufacturing plant.

Climatic category: 40/110/56 IEC 60068-1

Operating temperature range: -40 to +110°C

Related documents: IEC 60384-14, EN 60384-14.

ELECTRICAL CHARACTERISTICS

Rated voltage (VR): 310Vac / 800Vdc; (50/60Hz)

330Vac / 800Vdc; (50/60Hz)

Capacitance range: 0.01µF to 6.8µF

Capacitance values: E6 series (IEC 60063 Norm).

Capacitance tolerances (measured at 1 kHz):

±10% (K); ±20% (M);

Tolerance ±5% (J) available upon request.

Dissipation factor (DF):

tgδx10-4 at +25°C ±5°C: ≤10 (6)* at 1kHz *

Typical value

Insulation resistance:

Test conditions

Temperature: +25°C±5°C

Voltage charge time: 1 min

Voltage charge: 100 Vdc

Performance

≥1x105 MΩ (5x105 MΩ )* for C≤0.33µF

≥30000 s (150000 s )* for C>0.33µF

* Typical value

Test voltage between terminations (on all pieces):

1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C

Ø d ±0.05 p ≤15 22.5 ≤ p ≤ 27.5 p = 37.5

0.6 or 0.8* 0.8 1.0

*See size table.

All dimensions are in mm.

R.49

X1 CLASS (IEC 60384-14) - MKP Series

METALLIZED POLYPROPYLENE FILM CAPACITOR

SELF-HEALING PROPERTIES

Typical applications: interference suppression and «across-

the-line» applications. Suitable for use in situations where

failure of the capacitor would not lead to danger of electric

shock.

Class X1 shall be applied for PERMANENTLY CONNECTED

APPARATUS.

Note: PERMANENTLY CONNECTED APPARATUS:

apparatus which is intended for connection to the mains

by a connection which cannot be loosened BY HAND.

BY HAND:

operation that does not require the use of any object

such a tool, coin, etc.

PRODUCT CODE: R49

Note: R.49 series has replaced the 1.58 series (available

upon request). For new design we suggest the use of

the R.49 series.

TEST METHOD AND PERFORMANCE

Damp heat, steady state:

Test conditions

Temperature: +40°C±2°C

Relative humidity (RH): 93% ±2%

Test duration: 56 days

Performance

Dielectric strength: no dielectric breakdown or

ashover at 4.3 x VR (d.c.)/1 min

Capacitance change |∆C/C|: ≤5%

Insulation resistance: ≥50% of initial limit.

Endurance:

Test conditions

Temperature: +110°C±2°C

Test duration: 1000 h

Voltage applied: 1.25 x VR +1000Vac 0.1 s/h

Performance

Dielectric strength: no dielectric breakdown or

ashover at 4.3 x VR (d.c.)/1 min

Capacitance change |∆C/C|: ≤10%

Insulation resistance: ≥50% of initial limit.

Resistance to soldering heat:

Test conditions

Solder bath temperature: +260°C±5°C

Dipping time (with heat screen):10 s±1 s

Performance

Capacitance change |∆C/C|: ≤2%

Winding scheme

single sided metallized

polypropylene lm

Pitch Box thickness (B) Maximum dimensions (mm)

(mm) (mm) B max H max L max

10.0 All B +0.2 H +0.1 L +0.2

15.0 <7.5 B +0.2 H +0.1 L +0.3

15.0 ≥7.5 B +0.2 H +0.1 L +0.5

22.5 All B +0.2 H +0.1 L +0.3

27.5 All B +0.2 H +0.1 L +0.3

37.5 All B +0.3 H +0.1 L +0.3

Loose Taped

Fig.1 Fig.2

Insulated rigid leads Insulated exible leads 0.5mm2

09/2008 166

R.49

X1 CLASS (IEC 60384-14) - MKP Series

METALLIZED POLYPROPYLENE FILM CAPACITOR

SELF-HEALING PROPERTIES

PRODUCT CODE: R49

Rated

Cap. (*)

330 Vac / 800 Vdc

Std dimensions Ø d

Max

dv/dt at

440Vdc

(V/ µs)

Part Number

B H L p

0.047 µF 5.0 11.0 18.0 15.0 0.6 500 R49AI 2470 - - B1 -

0.068 µF 6.0 12.0 18.0 15.0 0.6 500 R49AI 2680 - - B1

0.068 µF 6.0 17.5 18.0 15.0 0.6 500 R49AI 2680 - - A2 -

0.10 µF 6.0 17.5 18.0 15.0 0.6 500 R49AI 3100 - - A2 -

0.15 µF 13.0 12.0 18.0 15.0 0.8 500 R49AI 3150 - - A3 -

0.15 µF 8.5 14.5 18.0 15.0 0.8 500 R49AI 3150 - - B1 M

0.22 µF 10.0 16.0 18.0 15.0 0.8 500 R49AI 3220 - - B2 M

0.22 µF 11.0 19.0 18.0 15.0 0.8 500 R49AI 3220 - - B1-

0.15 µF 6.0 15.0 26.5 22.5 0.8 400 R49AN 3150 - - B1 -

0.22 µF 7.0 16.0 26.5 22.5 0.8 400 R49AN 3220 - - B1 -

0.33 µF 8.5 17.0 26.5 22.5 0.8 400 R49AN 3330 - - B1 M

0.47 µF 10.0 18.5 26.5 22.5 0.8 400 R49AN 3470 - - B1 M

0.68 µF 13.0 22.0 26.5 22.5 0.8 400 R49AN 3680 - - B1 M

0.33 µF 9.0 17.0 32.0 27.5 0.8 200 R49AR 3330 - - A1 -

0.47 µF 11.0 20.0 32.0 27.5 0.8 200 R49AR 3470 - - A1 -

0.68 µF 11.0 20.0 32.0 27.5 0.8 200 R49AR 3680 - - B1 -

0.68 µF 13.0 22.0 32.0 27.5 0.8 200 R49AR 3680 - - A1 -

1.0 µF 13.0 25.0 32.0 27.5 0.8 200 R49AR 4100 - - B1 -

1.0 µF 14.0 28.0 32.0 27.5 0.8 200 R49AR 4100 - - A1 -

1.5 µF 14.0 28.0 32.0 27.5 0.8 200 R49AR 4150 - - B1 -

1.5 µF 18.0 33.0 32.0 27.5 0.8 200 R49AR 4150 - - A1 -

2.2 µF 18.0 33.0 32.0 27.5 0.8 200 R49AR 4220 - - B1 -

2.2 µF 22.0 37.0 32.0 27.5 0.8 200 R49AR 4220 - - A1 -

3.3 µF 22.0 37.0 32.0 27.5 0.8 200 R49AR 4330 - - B1 -

0.68 µF 11.0 22.0 41.5 37.5 1.0 100 R49AW 3680 - - B1 -

1.0 µF 11.0 22.0 41.5 37.5 1.0 100 R49AW 4100 - - B1 -

1.5 µF 13.0 24.0 41.5 37.5 1.0 100 R49AW 4150 - - B1 -

2.2 µF 16.0 28.5 41.5 37.5 1.0 100 R49AW 4220 - - B1 -

3.3 µF 19.0 32.0 41.5 37.5 1.0 100 R49AW 4330 - - B1 -

4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R49AW 4470 - - B1 -

6.8 µF 30.0 45.0 41.5 37.5 1.0 100 R49AW 4680 - - B1 -

Table 1

Standard

packaging style

Lead

length

(mm)

Taping style Ordering

code

(Digit 10 to 11)

(mm)

Fig.

(No.)

Pitch

(mm)

AMMO-PACK

12.70

19.05

10.0/15.0

22.5

REEL Ø500mm

12.70

19.05

10.0/15.0

22.5/27.5

Loose, short leads

Loose, long leads

04+2

25-1/+2

30 +5

Loose, insulated

rigid leads

Loose, insulated

exible leads

30+5

150±5

Note: Ammo-pack is the preferred packaging for taped version.

Mechanical version and packaging (Table1)

Tolerance: K (±10%); M (±20%)

For “capacitor connected in serial with main line” (two - phase and

three - phase net) application, please read the “SHORT GUIDE TO

CHOOSE THE RIGHT FILM CAPACITORS” at pag. 152 and contact

our Technical Service for choosing the safest solution.

All dimensions are in mm

E12 Series available upon request

Rated

Cap. (*)

310 Vac / 800 Vdc

Std dimensions Ø d

Max

dv/dt at

440Vdc

(V/ µs)

Part Number

B H L p

0.010 µF 5.0 11.0 13.0 10.0 0.6 600 R49AF 2100 - - 01 -

0.015 µF 5.0 11.0 13.0 10.0 0.6 600 R49AF 2150 - - 01 -

0.022 µF 6.0 12.0 13.0 10.0 0.6 600 R49AF 2120 - - 01 -

0.033 µF 6.0 12.0 13.0 10.0 0.6 600 R49AF 2330 - - 01 -

0.010 µF 5.0 11.0 18.0 15.0 0.6 500 R49AI 2100 - - 01 -

0.015 µF 5.0 11.0 18.0 15.0 0.6 500 R49AI 2150 - - 01 -

0.022 µF 5.0 11.0 18.0 15.0 0.6 500 R49AI 2220 - - 01 -

0.033 µF 5.0 11.0 18.0 15.0 0.6 500 R49AI 2330 - - 01 -

0.047 µF 6.0 12.5 18.0 15.0 0.6 500 R49AI 2470 - - 01 -

0.068 µF 6.0 12.0 18.0 15.0 0.6 500 R49AI 2680 - - M1 -M

0.068 µF 7.5 13.5 18.0 15.0 0.6 500 R49AI 2680 - - 01 -

0.10 µF 7.5 13.5 18.0 15.0 0.6 500 R49AI 3100 - -M1 -M

0.10 µF 8.5 14.5 18.0 15.0 0.6 500 R49AI 3100 - - 01 -

0.15 µF 10.0 16.0 18.0 15.0 0.8 500 R49AI 3150 - - 01 -

0.10 µF 6.0 15.0 26.5 22.5 0.8 400 R49AN 3100 - - 01

0.15 µF 7.0 16.0 26.5 22.5 0.8 400 R49AN 3150 - - 01

0.22 µF 8.5 17.0 26.5 22.5 0.8 400 R49AN 3220 - - 01

0.33 µF 10.0 18.5 26.5 22.5 0.8 400 R49AN 3330 - - 01

0.47 µF 11.0 20.0 26.5 22.5 0.8 400 R49AN 3470 - - 01

0.33 µF 9.0 17.0 32.0 27.5 0.8 200 R49AR 3330 - - 01

0.47 µF 11.0 20.0 32.0 27.5 0.8 200 R49AR 3470 - - 01

0.68 µF 13.0 22.0 32.0 27.5 0.8 200 R49AR 3680 - - 01

1.0 µF 14.0 28.0 32.0 27.5 0.8 200 R49AR 4100 - - 01

1.5 µF 18.0 33.0 32.0 27.5 0.8 200 R49AR 4150 - - 01

2.2 µF 22.0 37.0 32.0 27.5 0.8 200 R49AR 4220 - - 01

Mechanical version and packaging (Table1)

Tolerance: K (±10%); M (±20%)

APPROVALS

ENEC

IEC 60384-14 Class X1 File No.CA08.00030

UL 1414

(up to 1µF, 85°C;

250Vac)

Across-the-line File No.E97797

CSA - C22.2 No.1

(up to 1µF, 85°C;

250Vac)

Across-the-line

certied for

Canad

File No.E97797

UL 1283

(310 Vac)

Electromagnetic

Interference

Filters

File No.E85238

CSA - C22.2 No.8

(310 Vac)

Electromagnetic

Interference

Filters certied

for Canada

File No.E85238

Approved according to IEC 60384-14

According to IEC 60065.

09/2008

167

Loose Taped

Fig.1 Fig.2

Insulated rigid leads Insulated exible leads 0.5mm2

Ø d ±0.05 p= 27.5 p = 37.5

0.8 1

All dimensions are in mm.

GENERAL TECHNICAL DATA

Dielectric: polypropylene lm.

Plates: metal layer deposited by evaporation under vacuum.

Winding: non-inductive type.

Leads: tinned wire.

Protection: plastic case, thermosetting resin lled.

Box material is solvent resistant and ame retardant according to

UL94 V0.

Marking: Manufacturer’s logo, series, capacitance, tolerance,

rated voltage, capacitor class, dielectric code, climatic category,

passive ammability category, manufacturing date code, approvals,

manufacturing plant.

Climatic category: 40/110/56 IEC 60068-1

Operating temperature range: -40 to +110°C

Related documents: IEC 60384-14, EN 132400.

ELECTRICAL CHARACTERISTICS

Rated voltage (VR): 330Vac; 800Vdc(50/60Hz)*

Capacitance range: 0.33µF to 6.8µF

Capacitance values: E6 series (IEC 60063 Norm).

Capacitance tolerances (measured at 1 kHz):

±10% (K); ±20% (M).

Dissipation factor (DF):

tgδx10-4 at +25°C ±5°C: ≤10 (6)* at 1kHz *

Typical value

Insulation resistance:

Test conditions

Temperature: +25°C±5°C

Voltage charge time: 1 min

Voltage charge: 100 Vdc

Performance

≥1x105 MΩ (5x105 MΩ)* for C≤0.33µF

≥30000 s (150000 s)* for C>0.33µF

* Typical value

Test voltage between terminations (on all pieces):

1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C

TEST METHOD AND PERFORMANCE

Damp heat, steady state:

Test conditions

Temperature: +40°C±2°C

Relative humidity (RH): 93% ±2%

Test duration: 56 days

Performance

Dielectric strength: no dielectric breakdown or

ashover at 4.3 x VR (d.c.)/1 min

Capacitance change |∆C/C|: ≤5%

Insulation resistance: ≥50% of initial limit.

Endurance:

Test conditions

Temperature: +110°C±2°C

Test duration: 1000 h

Voltage applied: 1.25 x VR +1000Vac 0.1 s/h

Performance

Dielectric strength: no dielectric breakdown or

ashover at 4.3 x VR (d.c.)/1 min

Capacitance change |∆C/C|: ≤10%

Insulation resistance: ≥50% of initial limit.

Resistance to soldering heat:

Test conditions

Solder bath temperature: +260°C±5°C

Dipping time (with heat screen):10 s±1 s

Performance

Capacitance change |∆C/C|: ≤2%

Pitch Box thickness Maximum dimensions (mm)

(mm) (mm) B max H max L max

27.5 All B +0.2 H +0.1 L +0.3

37.5 All B +0.3 H +0.1 L +0.3

R.49+R

Capacitors with discharge resistor

X1 CLASS (IEC 60384-14) - MKP Series

METALLIZED POLYPROPYLENE FILM CAPACITOR

SELF-HEALING PROPERTIES

Typical applications: interference suppression and «across-

the-line» applications. Suitable for use in situations where

failure of the capacitor would not lead to danger of electric

shock.

Class X1 shall be applied for PERMANENTLY CONNECTED

APPARATUS.

Note: PERMANENTLY CONNECTED APPARATUS:

apparatus which is intended for connection to the mains

by a connection which cannot be loosened BY HAND.

BY HAND:

operation that does not require the use of any object

such a tool, coin, etc.

PRODUCT CODE: R49

09/2008 168

R.49+R

Capacitor with discharge resistor

X1 CLASS (IEC 60384-14) - MKP Series

METALLIZED POLYPROPYLENE FILM CAPACITOR

SELF-HEALING PROPERTIES

PRODUCT CODE: R49

Rated

Cap. (*)

330 Vac / 800 Vdc

Std dimensions Ø d

Max

dv/dt at

440Vdc

(V/ µs)

Part Number

B H L p

0.33 µF 9.0 17.0 32.0 27.5 0.8 200 R49AR 3330 - - B1 - -

0.47 µF 11.0 20.0 32.0 27.5 0.8 200 R49AR 3470 - - B1 - -

0.68 µF 13.0 22.0 32.0 27.5 0.8 200 R49AR 3680 - - B1 - -

1.0 µF 13.0 22.0 32.0 27.5 0.8 200 R49AR 4100 - - B1 M -

1.0 µF 14.0 28.0 32.0 27.5 0.8 200 R49AR 4100 - - B2 - -

1.5 µF 18.0 33.0 32.0 27.5 0.8 200 R49AR 4150 - - B1 M -

1.5 µF 14.0 28.0 32.0 27.5 0.8 200 R49AR 4150 - - B2 - -

2.2 µF 22.0 37.0 32.0 27.5 0.8 200 R49AR 4220 - - B1 - -

0.68 µF 11.0 22.0 41.5 37.5 1.0 100 R49AW 3680 - - A1 - -

1.0 µF 11.0 22.0 41.5 37.5 1.0 100 R49AW 4100 - - B1 - -

1.5 µF 13.0 24.0 41.5 37.5 1.0 100 R49AW 4150 - - B1 - -

2.2 µF 16.0 28.5 41.5 37.5 1.0 100 R49AW 4220 - - B1 - -

3.3 µF 19.0 32.0 41.5 37.5 1.0 100 R49AW 4330 - - B1 - -

4.7 µF 20.0 40.0 41.5 37.5 1.0 100 R49AW 4470 - - B1 - -

6.8 µF 30.0 45.0 41.5 37.5 1.0 100 R49AW 4680 - - B1 - -

Rated voltage (A=330Vac)

Mechanical version and packaging (Table 1)

Tolerance: K (±10%); M (±20%)

Value of discharge resistor (Table 2)

Table 1

Standard

packaging style

Lead

length

(mm)

Taping style Ordering

code

(Digit 10 to 11)

(mm)

Fig.

(No.)

Pitch

(mm)

REEL Ø500mm 19.05 2 27.5 CK

Loose, short leads

Loose, long leads

04 +2

25 -1/+2

30 +5

Loose, insulated

rigid leads

Loose, insulated

exible leads

30 +5

150 ±5

PRODUCT CODE SYSTEM

The part number, comprising 15 digits, is formed as follows:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

R 4 9 - -

Digit 1 to 3 Series code.

Digit 4 a.c. rated voltage:

A = 330Vac;

Digit 5 Pitch:

R = 27.5; W = 37.5 mm

Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of

Capacitance value and the 6th digit indicates

the number of zeros that must be added to

obtain the Rated Capacitance in pF.

Digit 10 to 11 Mechanical version and/or packaging (table 1)

Digit 12 Identies the dimensions and electrical

characteristics.

Digit 13 Internal use

Digit 14 Capacitance tolerance:

K=±10%; M=±20%

Digit 15 Value of the discharge resistor (tolerance±10%)

according to the following table*:

*Other resistors are avaible upon

request.

Table 2

R code (-)

470 kΩE

680 kΩF

1 MΩG

1.2 MΩ L

1.5 MΩ N

2.2 MΩ P

3.3 MΩ Q

4.7 MΩ S

6.8 MΩ T

10 MΩ V

All dimensions are in mm

APPROVALS

ENEC

IEC 60384-14 Class X1 File No.CA08.00030

UL 1283

(310 Vac-105°C)

Electromagnetic

Interference

Filters

File No.E85238

CSA - C22.2 No.8

(310 Vac-105°C)

Electromagnetic

Interference

Filters certied

for Canada

File No.E85238

Approved according to IEC 60384-14

According to IEC 60065.