UNISONIC TECHNOLOGIES CO., LTD MCR100 SCR SENSITIVE GATE SILICON CONTROLLED RECTIFIERS REVERSE BLOCKING THYRISTORS 3 1 SOT-89 SOT-23 1 TO-92 FEATURES * Sensitive gate allows triggering by micro controllers and other logic circuits * Blocking voltage to 600V * On-state current rating of 0.8A RMS at 80C * High surge current capability - 10A * Minimum and maximum values of IGT, VGT and IH specified for ease of design * Immunity to dV/dt - 20V/sec minimum at 110C * Glass-passivated surface for reliability and uniformity 1 DESCRIPTION PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. 2 Lead-free: MCR100L Halogen-free:MCR100GG ORDERING INFORMATION Ordering Number Normal Lead Free Plating MCR100-4-x-AB3-R MCR100L-4-x-AB3-R MCR100-4-x-AE3-R MCR100L-4-x-AE3-R MCR100-4-x-T92-B MCR100L-4-x-T92-B MCR100-4-x-T92-K MCR100L-4-x-T92-K MCR100-6-x-AB3-R MCR100L-6-x-AB3-R MCR100-6-x-AE3-R MCR100L-6-x-AE3-R MCR100-6-x-T92-B MCR100L-6-x-T92-B MCR100-6-x-T92-K MCR100L-6-x-T92-K MCR100-8-x-AB3-R MCR100L-8-x-AB3-R MCR100-8-x-AE3-R MCR100L-8-x-AE3-R MCR100-8-x-T92-B MCR100L-8-x-T92-B MCR100-8-x-T92-K MCR100L-8-x-T92-K Note: Pin assignment: G: Gate K: Cathode Halogen Free MCR100G-4-x-AB3-R MCR100G-4-x-AE3-R MCR100G-4-x-T92-B MCR100G-4-x-T92-K MCR100G-6-x-AB3-R MCR100G-6-x-AE3-R MCR100G-6-x-T92-B MCR100G-6-x-T92-K MCR100G-8-x-AB3-R MCR100G-8-x-AE3-R MCR100G-8-x-T92-B MCR100G-8-x-T92-K A: Anode Package SOT-89 SOT-23 TO-92 TO-92 SOT-89 SOT-23 TO-92 TO-92 SOT-89 SOT-23 TO-92 TO-92 Pin assignment 1 2 3 G A K G K A K G A K G A G A K G K A K G A K G A G A K G K A K G A K G A Packing Tape Reel Tape Reel Tape Box Bulk Tape Reel Tape Reel Tape Box Bulk Tape Reel Tape Reel Tape Box Bulk MCR100L-4-x-AB3-R (1) Packing Type (1) B: Tape Box, K: Bulk, R: Tape Reel (2) Package Type (2) AB3: SOT-89, AE3: SOT-23, T92: TO-92 (3) Rank (3) x: Refer to CLASSIFICATION OF IGT (4) Lead Plating (4) G: Halogen Free, L: Lead Free, Blank: Pb/Sn www.unisonic.com.tw Copyright (c) 2009 Unisonic Technologies Co., Ltd 1 of 6 QW-R301-016.C MCR100 SCR MARKING FOR SOT-23 MCR100-4 R4 L: Lead Free G: Halogen Free MCR100-6 R6 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw L: Lead Free G: Halogen Free MCR100-8 R8 L: Lead Free G: Halogen Free 2 of 6 QW-R301-016.C UNISONIC TECHNOLOGIES CO., LTD MCR100 SCR ABSOLUTE MAXIMUM RATINGS PARAMETER Peak Repetitive Off-State Voltage(Note 1) (TJ=-40 ~ 110, Sine Wave, 50 ~ 60Hz; Gate Open) SYMBOL RATINGS 200 400 600 0.8 UNIT V V V A MCR100-4 VDRM,VRRM MCR100-6 MCR100-8 On-Sate RMS Current (Tc=80) 180 Condition Angles IT(RMS) Peak Non-Repetitive Surge Current ITSM 10 A (1/2 cycle, Sine Wave, 60Hz, TJ=25) 2 Circuit Fusing Considerations (t=8.3 ms) It 0.415 A2s Forward Peak Gate Power (TA=25, Pulse Width 1.0s) PGM 0.1 W Forward Average Gate Power (TA=25, t=8.3ms) PG(AV) 0.1 W Peak Gate Current - Forward (TA=25, Pulse Width1.0s) IGM 1 A Peak Gate Voltage - Reverse (TA=25, Pulse Width1.0s) VGRM 5 V Operating Junction Temperature Range TJ -40 ~ +110 (Rated VRRM and VDRM) Storage Temperature Range TSTG -40 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient SYMBOL TO-92 SOT-23/SOT-89 JA MAX 200 400 UNIT /W /W ELECTRICAL CHARACTERISTICS (TJ=25, unless otherwise stated) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT OFF CHARACTERISTICS Peak Forward or Reverse Blocking TC=25 VD=Rated VDRM and VRRM; 10 A IDRM, IRRM Current RGK=1k TC=125 100 A ON CHARACTERISTICS Peak Forward On-State Voltage (Note 2) VTM ITM=1A Peak @ TA=25 1.7 V Gate Trigger Current (Continuous DC)(Note3) IGT VAK=7Vdc, RL=100, TC=25 40 200 A VAK=7Vdc, initiating TC=25 0.5 5 mA Holding Current (Note 4) IH current=20mA 10 mA TC=-40 TC=25 0.6 10 mA IL Latch Current VAK=7V, Ig=200A TC=-40 15 mA Gate Trigger Voltage (continuous TC=25 0.62 0.8 V VGT VAK=7Vdc, RL=100 dc) (Note 3) TC=-40 1.2 V DYNAMIC CHARACTERISTICS VD=Rated VDRM, Exponential Critical Rate of Rise of Off-State Voltage dV/dt Waveform, RGK=1000, 20 35 V/s TJ=110 IPK=20A; Pw=10sec; 50 A/s Critical Rate of Rise of On-State Current di/dt diG/dt=1A/sec, Igt=20mA Notes: 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. 2. Indicates Pulse Test Width1.0ms, duty cycle 1% 3. RGK=1000 included in measurement. 4. Does not include RGK in measurement www.unisonic.com.tw Copyright (c) 2009 Unisonic Technologies Co., Ltd 3 of 6 QW-R301-016.C UNISONIC TECHNOLOGIES CO., LTD MCR100 SCR VOLTAGE CURRENT CHARACTERISTIC OF SCR PARAMETER Peak Repetitive Off Stat Forward Voltage Peak Forward Blocking Current Peak Repetitive Off State Reverse Voltage Peak Reverse Blocking Current Peak On State Voltage Holding Current SYMBOL VDRM IDRM VRRM IRRM VTM IH +Current Anode+ VTM On State IH IRRM at VRRM Reverse Blocking Region (off state) Reverse Avalanche Region Anode- +Voltage IDRM at VDRM Forward Blocking Region (off state) CLASSIFICATION OF IGT RANK RANGE B 48~105A C 95~200A www.unisonic.com.tw Copyright (c) 2009 Unisonic Technologies Co., Ltd AA 8~16A AB 14~21A AC 19~25A AD 23~52A 4 of 6 QW-R301-016.C MCR100 TYPICAL CHARACTERISTICS Typical Gate Trigger Current vs. Junction Temperature Typical Gate Trigger Voltage vs. Junction Temperature 100 1.0 90 0.9 80 Gate Trigger Voltage (V) Gate Trigger Current (A) SCR 70 60 50 40 30 20 0.8 0.7 0.6 0.5 0.4 0.3 10 -40 -25 -10 5 20 35 50 65 80 95 110 Junction Temperature, TJ () 0.2 -40 -25 -10 5 20 35 50 65 80 95 110 Junction Temperature, TJ () Typical RMS Curent Derating Typical On-State Characteristics 120 10 110 MAXIMUM@T J=25 100 90 80 180 70 1 MAXIMUM@TJ=110 60 50 40 0 120 30 60 90 0.1 0.2 0.3 0.5 0.4 RMS On-State Current, IT(RMS) (A) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 0.1 0.5 0.8 1.11.4 1.7 2.0 2.3 2.6 2.9 3.2 3.5 Instantaneous On-State Voltage, VT (V) 5 of 6 QW-R301-016.C MCR100 SCR UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R301-016.C