SPEC NO: DSAD1554 REV NO: V.9 DATE: DEC/04/2008 PAGE: 1 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Ting.Li ERP: 1205000015
PHOTOCOUPLER
Part Number: KB827-B
GENERAL PURPOSE
HIGH ISOLATION VOLTAGE
SINGLE TRANSISTOR TYPE
PHOTOCOUPLER SERIES
DESCRIPTION
1.The KB827-B (2-channel) is optically cou pled isolators containing a GaAS light emitting diode
and an NPN silicon phototransistor.
2.The lead pitch is 2.54mm.
3.Solid insulation thickness between emitting diode and output phototransistor:>=0.6mm.
APPLICATIONS
1.Computer terminals.
2.Registers,copiers,automatic vending machines.
3.System appliances, measuring instruments.
4.Programmable logic controller.
5.Signal transmission between circuits of different potentials and impedances.
FEATURES
1.Lead forming (gull wing) type, for surface mou nting.
2.High isolation voltage between input and output (Viso=5000 Vrms).
3.Compact dual-in-line package KB827-B:2-channel type
4.Recognized by UL and CUL, file NO.E225308.
5.Approved by VDE 0884 Teil2(NO:4000636 4) (Creepage distance between input
and output:7mm or more).
6.Moisture Sensitivity Level : Level 4.
7.RoHS Compliant.
SPEC NO: DSAD1554 REV NO: V.9 DATE: DEC/04/2008 PAGE: 2 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Ting.Li ERP: 1205000015
PHOTOCOUPLER
Part Number: KB827-B
*Absolute Maximum Ratings (Ta=25°C)
Parameter Symbol Rating Unit
Input
F o r ward c urrent I
F
50 mA
Reverse voltage V
R
6V
Power di ssi pation P 70 mW
Output
Colle c t o r -e m itte r voltage V
CEO
35 V
Emitter-collector voltage V
ECO
6V
Co llec tor c urrent I
C
50 mA
Co llec tor p owe r d issipa tion P
C
150 mW
Total power dissipation Ptot 200 mW
*1
Isolation voltage Vi so 5000 Vrms
Operati ng temperature Topr -30~+100 °C
Storage temperature Tstg -55~+125 °C
*2
Solderi ng temperature Tsol 260 °C
*1 40 to 60% RH,AC for 1 minute.
*2 For 10 seconds.
*PACKAGE DIMENSIONS (UNIT:mm)
Lead Bending Type
TOLERANCE : ±0.5[±0.02] UNLESS OTHE RWISE NOTED.
SPEC NO: DSAD1554 REV NO: V.9 DATE: DEC/04/2008 PAGE: 3 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Ting.Li ERP: 1205000015
PHOTOCOUPLER
Part Number: KB827-B
*Electro-optical Characteristics
Parameter Symbol Conditions Min. Typ. Max. Unit
Input
Forward voltage V
F
I
F
=20mA ___ 1.2 1.4 V
Peak forward voltage V
FM
I
FM
=0.5A ___ ___ 3.0 V
Revers e c urrent I
R
V
R
=4V ___ ___ 10 μA
Outp ut Collector dark current I
CEO
V
CE
=20V,I
F
=0mA ___ ___ 10
-7
nA
Transfer
charact-
eristics
*1
Current transfer ratio CTR I
F
=5mA,V
CE
=5V 50 ___ 600 %
Co lle c to r -e mitter s a turation volta g e V
CE(
sat
)I
F
=20mA , I
C
=1mA ___ 0.1 0.2 V
Cut-off frequency f
c
V
CE
=5V, I
C
=2mA
R
L
=100Ω,-3dB ___ 80 ___ KHz
Response time Rise time
t
r
V
CE
=2V, I
C
=2mA
R
L
=100Ω
___ 4 18 μs
Fall time t
f
___ 3 18 μs
X 100%
Classification table of current transfer ratio is shown below.
CTR= F
I
Ic
Model No. Rank mark CTR(%)
KB827L-B L 50 to 100
KB827A-B A 80 to 160
KB827B-B B 130 to 260
KB827C-B C 200 to 400
KB827D-B D 300 to 600
KB827AB -B A or B 80 to 260
KB827BC -B B or C 130 to 400
KB827CD -B C or D 200 to 600
KB827AC -B A,B or C 80 to 400
KB827BD -B B,C or D 130 to 600
KB827AD -B A,B,C or D 80 to 600
KB827-B L,A,B,C ,D or No mark 50 to 600
A
SPEC NO: DSAD1554 REV NO: V.9 DATE: DEC/04/2008 PAGE: 4 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Ting.Li ERP: 1205000015
PHOTOCOUPLER
Part Number: KB827-B
Fig. 3 Collector Cur rent vs.
Collector-emitter Voltage F ig. 4 Relativ e Cu r rent Tr a n sfer Ratio
vs. Ambient Temperature
Fig. 1 Current Transfer Ratio vs.
Forward Current Fig. 2 Forward Current vs.
Forward voltage
Fig. 5 Collector-emitter Saturation
Voltag e vs. Ambi ent Te mperature Fig. 6 Collector Dar k Current vs.
Ambient Temperature
SPEC NO: DSAD1554 REV NO: V.9 DATE: DEC/04/2008 PAGE: 5 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Ting.Li ERP: 1205000015
PHOTOCOUPLER
Part Number: KB827-B
μ
Ω
Fig. 10 Frequency Response Test Circuit for Frequency Response
Ω
Ω
Ω
Fig. 9 Response Time vs.
Load Resistance
Fig. 7 Forw ard Current vs .
Ambient Temperature Fig. 8 Collector Power Dissipation vs.
Ambient Temperature
Test Circuit for Response Time
SPEC NO: DSAD1554 REV NO: V.9 DATE: DEC/04/2008 PAGE: 6 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Ting.Li ERP: 1205000015
PHOTOCOUPLER
Part Number: KB827-B
Fig. 11 Collector-emitter Saturation
Voltage vs. Forward Current
*NOTES ON HANDLING
1.Recommended soldering conditions (Dip soldering)
(1) Dip soldering
Temperature 260°C or below (molten solder temperature)
Time Less than 10 seconds.
Cycle One cycle allowed to be dipped in solder including plastic mold p ortion.
Flux Rosin flux containing small amount of chorine
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
(2) Cautions
Fluxes
Avovid removing the residual flux with freon-based and chlorine-based clean ing solvent.
2.Cautions regarding noise
Be aware that power is suddenly into the componment any surge current may cause dam age happen,
even if the voltage is within the absolute maximum ratings.
SPEC NO: DSAD1554 REV NO: V.9 DATE: DEC/04/2008 PAGE: 7 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Ting.Li ERP: 1205000015
PHOTOCOUPLER
Part Number: KB827-B
CAUTION
Within this device there exists GaAs (Gallium Arsenid e) material which is a harmful substance if in-
gested.
GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dis-
solve them.
document, please confirm that this is the latest version. Not all devices / types available
The information in this document is subject to change without notice. Before using this
specified operating ranges as set forth in the most recent products specifications.
In developing your designs, please ensure that KINGBRIGHT products are used within
KINGBRIGHT product could cause loss of human life, bodily injury or damage to property.
stress. It is the responsibility of the buyer, when utilizing KINGBRIGHT products, to observe
standards of safety, and to a avoid situations in which a malfunction or failure of a
malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
We are mention about our product quality stablity, semiconductor devices in general can
in every country.
RESTRICTIONS ON PRODUCT USE
SPEC NO: DSAD1554 REV NO: V.9 DATE: DEC/04/2008 PAGE: 8 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Ting.Li ERP: 1205000015
PHOTOCOUPLER
Part Number: KB827-B
Dim ensio n of Tube Unit:mm
TOLERANCE : ± 0.4[± 0.012] UNLESS OTHERWISE NOTED.
Dime nsion of C arton
Part Number Package Packing Style
KB827-B 8-pin DIP 50pcs / each tube
SPEC NO: DSAD1554 REV NO: V.9 DATE: DEC/04/2008 PAGE: 9 OF 9
APPROVED: WYNEC CHECKED: Tracy Deng DRAWN: Ting.Li ERP: 1205000015
PHOTOCOUPLER
Part Number: KB827-B
PACKING & LABEL SPECIFICATIONS
