1
2401 Stanwell Drive, Concord Ca. 94520 Ph: 925-687-4411 Fax: 925-687-3333 www.calex.com Email: sales@calex.com
2/25/08 ECO 110727-4
EFIL-100-10 FILTER MODULE
Features
Input Differential and Common Mode Filter
Water washable plastic, non-conductive case (2)
Available with RoHS compliant construction,
simply add “(RoHS)” after the part number i.e
EFIL-100-10 (RoHS)
●
●
●
* Absolute Maximum Ratings. Caution: Stresses in excess of the
Absolute Maximum Ratings can cause permanent damage to the
device (1).
Input Parameters
Model EFIL-100-10 Units
Input Voltage MAX 100 VDC
Input Frequency MAX 100 Hz
Output Parameters
Model EFIL-100-10 Units
Average Current
Natural Convection MAX 7 ADC
Average Current
400LFM Airow MAX 10 ADC
Operating Current MAX 10 ADC
Insertion Loss, Differential
Mode, 500 kHz. TYP 31 dB
Insertion Loss, Common Mode,
500 kHz TYP 28 dB
Resistance, per leg TYP 17 milliohms
General Specications
Units
Environmental
Case Temperature
Operating Range at 10A
MIN
MAX
-40
+60 ºC
Case Temperature
Operating Range at 7A
MIN
MAX
-40
+80 ºC
Storage Range MIN
MAX
-40
+105 ºC
General
Unit Weight TYP 28 grams
Case Dimension 1” x 2” x 0.47”
Notes:
(1) All parameters measured at Ta=25ºC ambient, Vin = 48VDC, 7
ADC load. Refer to CALEX Application Notes for denition of
terms, measurement circuits and other information.
(2) Water washability - Calex Filter Modules are designed to
withstand most solder/wash processes. Careful attention
should be used when assessing the applicability in your specic
manufacturing process. Filter Modules are not hermetically
sealed.
(3) The unit is not Polarity Sensitive. The +Vin and +Vout pins can
be connected as - Vin and -Vout.
(4) Available with RoHS and Non-RoHS construction, contact
factory for details.
RoHS Compliance:
See Calex Website www.calex.com/RoHS.html for the complete
RoHS Compliance statement.
The RoHS marking is as follows.
Unless otherwise stated, these specications apply for ambient
temperature Ta=25 ºC, Vin=48VDC, 7ADC load. (1)
PIN FUNCTION
1 + Vin (3)
2 - Vin
3 Ground
4 + Vout (3)
5 - Vout
Mechanical tolerances unless otherwise noted:
X.XX dimensions: ±0.020 inches
X.XXX dimensions ±0.005 inches
BOTTOM VIEW