2/0
2
Block Contactors
Contents
Panorama
3-pole Contactors................................................................................................................... 2/2
4-pole Contactors................................................................................................................... 2/4
3-pole Contactors: Description and Ordering Details
A 9 ... A 110 Contactors (a.c. Operated)................................................................................ 2/6
A 145 ... AF 1650 Contactors (a.c. Operated) ..................................................................... 2/10
AL 9 ... AE 110, AL..Z Contactors (d.c. Operated)............................................................... 2/14
TAL 9 ... TAE 110 Contactors (d.c. Operated) ..................................................................... 2/16
AF 50 ... AF 110 Contactors (a.c. / d.c. Operated with Electronic Coil Interface) ................ 2/18
AF 145 ... AF 1650 Contactors (a.c. / d.c. Operated with Electronic Coil Interface) ............ 2/20
4-pole Contactors: Ordering Details
A 9 ... A 75 Contactors (a.c. Operated)................................................................................ 2/22
EK 110 ... EK 1000 Contactors (a.c. Operated)................................................................... 2/24
AL 9 ... AE 75 Contactors (d.c. Operated) ........................................................................... 2/26
TAL 9 ... TAE 75 Contactors (d.c. Operated) ....................................................................... 2/28
EK 110 ... EK 1000 Contactors (d.c. Operated)................................................................... 2/30
AF 45 ... AF 75 Contactors (a.c. / d.c. Operated with Electronic Coil Interface) .................. 2/31
Specific Contactors: Ordering Details
UA..RA Contactors for Capacitor Switching......................................................................... 2/34
UA... Contactors for Capacitor Switching............................................................................. 2/38
GA 75 and GAE 75 Contactors for d.c. Switching ............................................................... 2/44
AM... Magnetically Latched Contactors ............................................................................... 2/46
EH 1200 Contactor for Non Inductive Loads ....................................................................... 2/48
Applications and Contactor Selection
Capacitor Switching .............................................................................................................2/32
Star-Delta Starting ............................................................................................................... 2/50
Control of Three-Phase Slip-Ring Motors ............................................................................ 2/52
Autotransformer Starting ...................................................................................................... 2/54
LV/LV Three-Phase Transformer Switching ........................................................................ 2/55
Lighting Circuit Switching ..................................................................................................... 2/56
d.c. Circuit Switching............................................................................................................ 2/60
Auxiliary Contacts for Safety Circuits ................................................................................... 2/63
Technical Data
A..., AF..., AL..., AL..Z, TAL..., AE... and TAE Contactors ................................................... 2/64
EK... Contactors ................................................................................................................... 2/76
Contactor Electrical Durability and Utilization Categories .................................................... 2/81
Influence of the Length of Conductors used in Contactor Control Circuit ............................ 2/88
Parallel Connection of Main Poles ....................................................................................... 2/90
Temporary or Intermittent Duty ............................................................................................ 2/91
Questionnaire for Product Specifications ............................................................................. 2/92
Low Voltage Products 2/1
1SBC100122C0202
2/2 Low Voltage Products
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
3
M
3
3
R
3
R
3
0.1...0.32
0.3...1.0 0.9...2.7
2...6.3 5.7...18.9
E16 DU
... -10
1.0...1.4
1.3...1.8
1.7...2.4
2.2...3.1
2.8...4.0
3.5...5.0
4.5...6.5
6.0...8.5
7.5...11
10...14
13...19
18...25
24...32
0.10...0.16
0.16...0.25
0.25...0.40
0.40...0.63
0.63...1.0
TA 25 DU
...
22...32
29...42
TA 42 DU
...
A 9A 12 A 16 A 26 A 30 A 40
AL 9AL 12 AL 16 AL 26 AL 30 AL 40
a.c. Circuit
Switching
Switched-on current
=
Switched-off current = I
n
Time
Time
Switched-off
current = I
n
Switched-on current 6 x I
n
a.c. Circuit
Switching
Switching of 3-phase Cage Motors IEC
AC-3 Power θ < 55 °C, 400 V kW 4 5.5 7.5 11 15 18.5
rating
Rated θ < 55 °C, 400 V A91217263237
AC-3 operational θ < 55 °C, 415 V A91217263237
current θ < 55 °C, 690 V A791017
*21*25*
Switching of Resistive Circuits IEC * For AL 26 ... AL 40 see "Technical Data"
Rated θ < 40 °C, 690 V A25 27 30 45 55 60
AC-1 operational θ < 55 °C, 690 V A22 25 27 40 55 60
current θ < 70 °C, 690 V A18 20 23 32 39 42
With conductor cross-sectional area mm22.5 4 4 6 10 16
Rated operational voltage V690
UL/CSA
3-phase Motor-rating Motor-rating 480 V hp 57.5 10 20 25 30
General Use Rating Amp-rating 600 V A21 25 30 40 50 60
Nema Size 00 0 11P
AC-3 utilization category
When making,
the motor current
is about 6 x In.
Breaking while the
motor is running at
In motor F.L.C.
AC-1 utilization category
When making,
the switched-on
current is equal to
the In load rated
current with
cos ϕ 0.95.
TP 40 DA, TP 180 DA Direct timing - Front mounting TP 40 IA, TP 180 IA
TE5S Direct timing - Separate mounting
VE 5-1
VM 5-1
RV 5
RC 5-1
RT 5
1 x N.O. 1 x N.C.
A 9-30-10 A 26-30-10
a.c.
Control supply range
Types A 12-30-10 A 30-30-10
A..., AF... Contactors A 16-30-10 A 40-30-10
AL 9-30-10 AL 26-30-10
d.c.
Control supply range
Types AL 12-30-10 AL 30-30-10
AL..., AE..., AF... Contactors
AL 16-30-10 AL 40-30-10
CA 5-10 1-pole, front mounting CA 5-01 1-pole, front mounting
Selection & Ordering
Select accessory type and
quote required data in plain
text.
Selection & Ordering
Select contactor type.
Select contactor coil voltage on cover folding
page 0/1, according to control circuit supply.
(Please quote coil voltage in plain text).
Note: The AF contactor range, with a.c./d.c. Electronic
Coil Interface, is available from AF 50 up to
AF 1650.
Timers TP..,Pneumatic
(A..., AE..., AF... contactors only) Types
TE..,Electronic
Supply voltages: 24 V a.c./d.c.,
110 ... 120; 220 ... 240; 380 ... 440 V a.c.
Interlocks VE 5-., Mechanical / Electrical Types
VM..., Mechanical
mounting between 2 contactors
Surge RV.., (Varistor) a.c./d.c.
suppressors RC.., (Capacitor) a.c. Types
RT.., (Transil diode) d.c.
Contactor
Main
Accessories
Contactor
Main
Accessories
3-pole
Contactors
3-pole
Contactors
Selection & Ordering
Select O/L relay type and
setting range according to
motor F.L.C.
&
setting
range in
Amps
Types A.. AF.. AL../TAL.. AE../TAE UA..RA/UA.. GA../GAE.. AM..
>> Description pages 2/6, 2/10 2/18, 2/20 2/14 2/14 2/34, 2/38 2/44 2/46
>> Ordering Details pages 2/7, 2/11 2/19, 2/21 2/15, 2/16 2/15, 2/16 2/35, 2/39 2/45 2/47
>> Technical Data pages 2/64 ..................................... 2/75 2/37, 2/41 2/44 2/46
O/L relays TA..DU.., Thermal O/L relay Types
E..DU.., Electronic O/L relay
Standard starting time 2 ... 10 s
tripping class 10 A
Protection of
3-phase motors
Protection of
3-phase motors
For further
information:
For further
information:
A.., AL.., AE.., AF..,
A.., AL.., AE.., AF..,
Auxiliary CA 5-.., 1-pole, Types
contacts CAL ..-.., 2-pole
Low Voltage Products 2/3
E 500 DU
250...800
E 200 DU
TA 75 DU
...
29...42
36...52
45...63
60...80
60...80
65... 90
80...110
TA 200 DU
...
130...175
150...200
60...200
TA 450 DU
...
165...235
220...310
E 320 DU
100...320 150...500
E 800 DU
TA 80 DU
...
TA 110 DU
...
375...1250
E 1250 DU
bar / mm
A 50 A 63 A 75 A 95 A 110 A 145 A 185 A 210 A 260 A 300 AF 400 AF 460 AF 580 AF 750 AF 1350 AF 1650
AE 50 AE 63 AE 75 AE 95 AE 110 AF 145 AF 185 AF 210 AF 260 AF 300
bar / mm bar / mm
22 30 37 45 55 75 90 110 140 160 200 250 315 400 475 560
50 65 75 96 110 145 185 210 260 305 400 460 580 750 860 1050
50 65 75 96 110 145 185 210 260 300 400 460 580 750 860 1050
35 43 46 65 82 120 170 210 220 280 350 400 500 650 800 950
100 115 125 145 160 250 275 350 400 500 600 700 800 1050 1350 1650
85 95 105 135 145 230 250 300 350 400 500 600 700 875 1150 1450
70 80 85 115 130 180 180 240 290 325 400 480 580 720 1000 1270
35 50 50 50 70 120 150 185 240 300 2 x 185 2 x 240 2x240 2x50x8 2//100x5 3//100x5
1000 690 1000
40 60 60 60 75 100 125 150 200 250 350 400 500 600 800 900
80 90 105 125 140 230 250 300 350 400 550 650 750 900 1350 1650
2–3 4 5 6 7 8
Inverse timing - Front mounting
TE5S Direct timing - Separate mounting
TE5S Sep. mounting
RV 5
RC 5-2
RT 5
VE 5-2
VM 300H
VM 750H
1 x N.O. + 1 x N.C. 1 x N.O . + 1 x N.C. 1 x N.O. + 1 x N.C.
A 50-30-00 A 95-30-00 A 145-30-11 A 210-30-11 AF 400-30-11 AF 580-30-11 AF 1350-30-11
A 63-30-00 A 110-30-00 A 185-30-11 A 260-30-11 AF 460-30-11 AF 750-30-11 AF 1650-30-11
A 75 30-00 A 300-30-11
AE 50-30-00 AE 95-30-00 AF 145-30-11 AF 210-30-11 AF 400-30-11 AF 580-30-11 AF 1350-30-11
AE 63-30-00 AE 110-30-00 AF 185-30-11 AF 260-30-11 AF 460-30-11 AF 750-30-11 AF 1650-30-11
AE 75-30-00 AF 300-30-11
CAL 5-11 2-pole, side mounting
VM 1650H
The AF 50 ... AF 1650 contactors are equipped with a built-in electronic coil interface which eliminates the need
of extra surge suppressors - For A 145 ... A 300 use RC-EH 300
>> Accessories ........................................... section 4
>> Motor Protection ................................... section 5
>> Approvals ............................................... section 7
>> Terminal Marking .................................. section 8
>> Dimensions ............................................ section 9
Information
about:
Information
about:
CAL 18-11 2-pole, side mounting CAL 18-11 B
(1st block) (2nd block)
3-pole Contactors
3-pole Contactors
2/4 Low Voltage Products
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
R
3
R
3
4 N.O. main poles
A 9-40-00 A 26-40-00
a.c.
Control supply range
Types A 16-40-00
A..., EK... Contactors
AL 9-40-00 AL 26-40-00
d.c.
Control supply range
Types AL 16-40-00
AL..., AE..., EK... Contactors
2 N.O. + 2 N.C. main poles
A 9-22-00
a.c.
Control supply range
Types A 16-22-00 A 26-22-00
A... Contactors
d.c.
Control supply range
Types AL 9-22-00 AL 26-22-00
AL..., AE... Contactors
AL 16-22-00
a.c. Circuit
Switching
a.c. Circuit
Switching
Switching of Resistive Circuits IEC
Rated θ < 40 °CA25 30 45
AC-1 operational θ < 55 °CA22 27 40
current θ < 70 °CA18 23 32
With conductor cross-sectional area mm22.5 4 6
Rated operational voltage V690
4-pole
Contactors
4-pole
Contactors
Contactor
Main
Accessories
Contactor
Main
Accessories
Selection & Ordering
Select accessory type and
quote required data in plain
text.
CA 5-10 1-pole, front mounting CA 5-01 1-pole, front mounting
TP 40 DA, TP 180 DA Direct timing - Front mounting
TE5S Direct timing - Separate
VE 5-1
VM 5-1
RV 5
RC 5-1
RT 5
Types A.. EK.. AF.. AL../AE.. TAL../TAE.. AM..
>> Ordering Details ............. pages 2/22 2/24, 2/30 2/31 2/26 2/28 2/47
>> Technical Data ................ pages 2/64 ... 2/74 2/76 ... 2/80 2/64 ....................... 2/74 2/46
Switched-on current
=
Switched-off current = I
n
Time
1 x N.O. 1 x N.C.
UL/CSA
General Use Rating Amp-rating 600 V A21 30 40
Nema Size 00 0 1
Selection & Ordering
Select 4 N.O. or 2 N.O. + 2 N.C. main poles.
Select contactor type.
Select contactor coil voltage on cover folding
page 0/1, according to control circuit supply.
(Please quote coil voltage in plain text).
Note: The 4 N.O. or 2 N.O. + 2 N.C. AF contactor range
with a.c./d.c. Electronic Coil Interface,
is available from AF 45 up to AF 75.
AC-1 utilization category
When making,
the switched-on
current is equal to
the In load rated
current with
cos ϕ 0.95.
For further
information:
For further
information:
A 9 A 16 A 26
AL 9 AL 16 AL 26
A.., AL.., AE.., EK..,
A.., AL.., AE.., EK..,
Auxiliary CA 5-.., 1-pole Types
contacts CAL ..-.., 2-pole
Timers TP.., Pneumatic Types
for A..., AE... contactors only
TE.., Electronic
Supply voltages: 24 V a.c./d.c.,
110 ... 120 ; 220 ... 240 ; 380 ... 440 V a.c.
Interlocks VE 5-., Mechanical / Electrical Types
VM..., VH... Mechanical
mounting between 2 contactors
Surge RV.., (Varistor) a.c./d.c.
suppressors RC.., (Capacitor) a.c. Types
RT.., (Transil diode) d.c.
Low Voltage Products 2/5
A 45-40-00 EK 110-40-11 EK 175-40-11 EK 370-40-11
A 50-40-00 EK 550-40-11
A 75-40-00 EK 150-40-11 EK 210-40-11 EK 1000-40-11
AE 45-40-00 EK 110-40- 21 EK 175-40-21 EK 370-40-21
AE 50-40-00 EK 550-40-21
AE 75-40-00 EK 150-40-21 EK 210-40-21 EK 1000-40-21
A 45-22-00 ——
A 75-22-00
AE 45-22-00
AE 75-22-00
70 100 125 200 250 300 350 550 800 1000
60 85 105 180 230 270 310 470 650 800
50 70 85 155 200 215 250 400 575 720
25 35 50 95 150 185 240 2 x 185 2 x 240 2 x 300
690 1000
CAL 5-11 2-pole, side mounting CAL 16-11 2-pole, side mounting
TE5S Direct timing - Separate mounting (interpose an N.. contactor relay f or EK 370 ... EK 1000)
TP 40 IA, TP 180 IA Inverse timing - Front mounting
mounting
VE 5-2
VH 145
(Mechanical / Electrical) VH 300
(Mechanical / Electrical)
VH 800
RV 5
RC 5-2
RT 5
RC-EH 300
RC-EH 800
(Varistor + RC)
>> Accessories ........................................... section 4 >> Terminal Marking .................................. section 8
>> Approvals ............................................... section 7 >> Dimensions ............................................ section 9
1 x N.O. + 1 x N.C. 1 x N.O. + 1 x N.C.
80 80 105 170 200 250 300 420 540
223––
Information
about:
Information
about:
A 45 A 50 A 75 EK 110 EK 150 EK 175 EK 210 EK 370 EK 550 EK 1000
AE 45 AE 50 AE 75
4-pole Contactors
4-pole Contactors
2/6 Low Voltage Products
1SBC100122C0202
A50-30
A1
A2
V
Hz
50
60
80
1 L1 3 L2 5 L3
2 T1 4 T2 6 T3
6-
1-
2-
3-
4-
5-
6-
1-
2-
3-
4-
5-
E1677D
A 9 ... A 110 3-pole Contactors
a.c. Operated
Application
A 9 ... A 110 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V a.c. / 1000 V a.c. or
220 V d.c. / 440 V d.c. The contactors can also be used for many other applications such as isolation, capacitor switching, lighting.
Description
The A... series 3-pole contactors are of the block type design.
Main poles and auxiliary contact blocks
A 9 ... A 40 1-stack contactors:
–3 main poles,
–1 built-in auxiliary contact,
front and side mounted add-on auxiliary contact blocks.
A 9 ... A 40 2-stack contactors:
–1
st stack with 3 main poles and 1 built-in auxiliary contact,
–2
nd stack with 4 built-in auxiliary contacts,
side mounted add-on auxiliary contact blocks.
The built-in auxiliary contact elements are mechanically linked.
A 50 ... A 110 contactors:
–3 main poles,
front and side mounted add-on auxiliary contact blocks.
Control circuit: a.c. operated with laminated magnet circuit.
Accessories: a wide range of accessories is available
Variants
4-pole: A 9 ... A 75 contactors (with 4 N.O. or 2 N.O. + 2 N.C. main poles).
d.c. operated: AL 9 ... AL 40, AL 9Z ... AL 16Z and AE 50 ... AE 110 contactors.
d.c. operated with large coil voltage range: TAL 9 ... TAL 40 and TAE 50 ... TAE 110 contactors.
electronic coil interface (a.c./d.c. operated): AF 50 ... AF 110 contactors.
contactors for capacitor switching (UA..., UA..RA types).
contactors for d.c. switching (GA..., GAE... types).
magnetically latched contactors (AM... types).
Location of surge suppressors.
Clear marking of coil voltages and
frequencies.
Quick fixing on mounting rail according
to IEC 60715, EN 60715 standards:
35 x 7.5 mm for A 9 ... A 40 contactors,
35 x 15 mm for A 9 ... A 75 contactors,
75 x 25 mm for A 50 ... A 110 contactors.
Location of side-mounted accessories
(on right or left hand side).
Holes for screw fixing (screws not supplied).
Terminals delivered in open position with
captive screws.
Screwdriver guidance for all terminals.
Degree of protection (IP...) of terminals
according to IEC 60947-1:
–A 9 ... A 40 contactors:
IP 20 for main and auxiliary terminals.
–A 50 ... A 110 contactors:
IP 10 for main terminals,
IP 20 for auxiliary terminals.
Stops for attaching front mounted acces-
sories.
Location of function marker.
Terminal marking according to
IEC 60947-4-1, EN 50005, EN 50012 and
NEMA standards.
Connecting point for control leads in top
part of main terminals of A 50 ... A 110
contactors
Terminal screws:
–A 9 ... A 16 contactors:
M3.5 Pozidriv (+,-) No. 2 for all terminals,
–A 26 contactors:
M4 Pozidriv (+,-) No. 2 for main and
auxiliary terminals,
M3.5 Pozidriv (+,-) No. 2 for coil terminals,
–A 30, A 40 contactors:
M5 Pozidriv (+,-) No. 2 for main terminals,
M3.5 Pozidriv (+,-) No. 2 for auxiliary and
coil terminals,
–A 50 ... A 75 contactors:
M6 Pozidriv (+,-) No. 2 for main terminals,
M3.5 Pozidriv (+,-) No. 2 for coil terminals,
–A 95 ... A 110 contactors:
M8 Hexagon socket (s = 4 mm) for main
terminals,
M3.5 Pozidriv (+,-) No. 2 for coil terminals.
2
Low Voltage Products 2/7
1SBC100122C0202
A 9-30-10
1SBC5 7312 2F0301
A 26-30-10
1SBC5 7309 2F0301
A 50-30-00
A 95-30-00
1SBC5 8075 2F0301
1SBC5 7324 2F0301
Ordering Details
IEC UL/CSA Auxiliary Type Order code Weight
contacts kg
Rated Rated
3-Phase General
fitted
power current
motor use 1st stack 2nd stack
400 V θ < 40°Crating rating
AC-3 AC-1
480 V 600 V
state coil voltage
state coil voltage code
Packing
kW A hp A (see table below) (see table below) 1 piece
1– –– A 9-30-10 1SBL 141 001 R 10 0.340
425521–1 –– A 9-30-01 1SBL 141 001 R 01 0.340
–– 22 A 9-30-22 1SBL 141 001 R 22 0.400
1– 22 A 9-30-32 1SBL 141 001 R 32 0.400
1– –– A 12-30-10 1SBL 161 001 R 10 0.340
5.5 27 7.5 25 –1 –– A 12-30-01 1SBL 161 001 R 01 0.340
–– 22 A 12-30-22 1SBL 161 001 R 22 0.400
1– 22 A 12-30-32 1SBL 161 001 R 32 0.400
1– –– A 16-30-10 1SBL 181 001 R 10 0.340
7.5 30 10 30 –1 –– A 16-30-01 1SBL 181 001 R 01 0.340
–– 22 A 16-30-22 1SBL 181 001 R 22 0.400
1– 22 A 16-30-32 1SBL 181 001 R 32 0.400
1– –– A 26-30-10 1SBL 241 001 R 10 0.600
11 45 20 40 1 A 26-30-01 1SBL 241 001 R 01 0.600
1– 22 A 26-30-32 1SBL 241 001 R 32 0.660
1– –– A 30-30-10 1SBL 281 001 R 10 0.710
15 55 25 50 1 A 30-30-01 1SBL 281 001 R 01 0.710
1– 22 A 30-30-32 1SBL 281 001 R 32 0.770
1– –– A 40-30-10 1SBL 321 001 R 10 0.710
18.5 60 30 60 1 A 40-30-01 1SBL 321 001 R 01 0.710
1– 22 A 40-30-32 1SBL 321 001 R 32 0.770
–– –– A 50-30-00 1SBL 351 001 R 00 1.160
22 100 40 80 1 1 A 50-30-11 1SBL 351 001 R 11 1.200
–– 22 A 50-30-22 1SBL 351 001 R 22 1.230
–– –– A 63-30-00 1SBL 371 001 R 00 1.160
30 115 60 90 1 1 A 63-30-11 1SBL 371 001 R 11 1.200
–– 22 A 63-30-22 1SBL 371 001 R 22 1.230
–– –– A 75-30-00 1SBL 411 001 R 00 1.160
37 125 60 105 1 1 A 75-30-11 1SBL 411 001 R 11 1.200
–– 22 A 75-30-22 1SBL 411 001 R 22 1.230
–– –– A 95-30-00 1SFL 431 001 R 00 2.000
45 145 60 125 1 1 A 95-30-11 1SFL 431 001 R 11 2.040
–– 22 A 95-30-22 1SFL 431 001 R 22 2.070
–– –– A 110-30-00 1SFL 451 001 R 00 2.000
55 160 75 140 1 1 A 110-30-11 1SFL 451 001 R 11 2.040
–– 22 A 110-30-22 1SFL 451 001 R 22 2.070
Coil voltages and codes
Voltage Voltage Code
V - 50Hz V - 60Hz
24 24 8 1
48 48 8 3
110 110 ... 120 8 4
220 ... 230 230 ... 240 8 0
230 ... 240 240 ... 260 8 8
380 ... 400 400 ... 415 8 5
400 ... 415 415 ... 440 8 6
Other voltages: page 0/1.
>> Accessory Fitting Details ........................................................................................................................................................... page 2/8
>> Thermal O/L Relays ............................................. page 2/9 >> General - Approvals ............................................. section 7
>> Auxiliary Contacts for Safety Circuits .............. page 2/63 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/64 >> Dimensions ........................................................... section 9
A 9 ... A 110 3-pole Contactors
a.c. Operated
3-pole Contactors
3-pole Contactors
2/8 Low Voltage Products
1SBC100122C0202
E1684D
VE 5-1
RV 5/..
CAL 5-11
TA 25 DU..
A 26-30-10
CA 5-10
CA 5-31M
TP 40 DA
A 9 ... A 110 3-pole Contactors
Main Accessories
Fitting Details - For Ordering Details, see "Accessories"
Many configurations of accessories are possible depending on whether these are front mounted or side mounted.
Contactor Main Available Front mounted accessories Side mounted accessories
types poles auxiliary
contacts Auxiliary contact Auxiliary contact
1-pole CA 5-.. Auxiliary contact Pneumatic timer 2-pole CAL.. Interlock unit
(or 1-pole CE 5-..) 4-pole CA 5-.. TP .. A (or 1-pole CEL 18-..) VM 5-.. or VE 5-..
A 9 ... A 26 3 0 1 0 1 to 4 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A (6) +1 to 2 x CAL 5-11 or 1 x VM 5-1 or VE 5-1
A 9 ... A 26 3 0 0 1 (5)
(1 to 2 x CE 5-.. max.) (1)
+ 1 x CAL 5-11
A 9 ... A 16 3 0 2 2 –– –1 to 2 x CAL 5-11 or 1 x VM 5-1 or VE 5-1
A 9 ... A 26 3 0 3 2 + 1 x CAL 5-11
A 30, A 40 3 0 1 0 1 to 5 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 to 2 x CAL 5-11 or 1 x VM 5-1 or VE 5-1
A 30, A 40 3 0 0 1 (5)
(1 to 3 x CE 5-.. max.) (2) + 1 x 1-pole CA 5-.. or CE 5-.. (2)
+ 1 x CA 5-.. (1-pole) +1 x CAL 5-11
A 30, A 40 3 0 3 2 (5) 1 x CA 5-.. ––+1 to 2 x CAL 5-11 or 1 x VM 5-1 or VE 5-1
(or 1 x CE 5-..)
(4)
+ 1 x CAL 5-11
A 50 ... A 75 3 0 0 0 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 to 2 x CAL 5-11 or 1 x VE 5-2
(1 to 5 x CE 5-.. max.) (3) + 2 x 1-pole CA 5-.. or CE 5-.. (3)
+ 2 x CA 5-.. (1-pole) +1 x CAL 5-11
A 50 ... A 75 3 0 1 1 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 x CAL 5-11 or 1 x VE 5-2
(1 to 5 x CE 5-.. max.) (3) + 2 x 1-pole CA 5-.. or CE 5-.. (3)
+ 2 x CA 5-.. (1-pole)
A 50 ... A 75 3 0 2 2 1 to 2 x CA 5-.. ––+1 to 2 x CAL 5-11 or 1 x VE 5-2
(1 to 2 x CE 5-.. max.)
+ 1 x CAL 5-11
A 95, A 110 3 0 0 0 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) +1 to 2 x
CAL 18-11
or 1 x VE 5-2
(1 to 5 x CE 5-.. max.) (3) + 2 x 1-pole CA 5-.. or CE 5-.. (3)
(or 1 to 2 x CEL 18-..) +1 x CAL 18-11
A 95, A 110 3 0 1 1 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) +1 x CAL 18-11 or 1 x VE 5-2
(1 to 5 x CE 5-.. max.) (3) + 2 x 1-pole CA 5-.. or CE 5-.. (3)
(or 1 x CEL 18-..)
A 95, A 110 3 0 2 2 1 to 2 x CA 5-.. ––+1 to 2 x
CAL 18-11
or 1 x VE 5-2
(1 to 2 x CE 5-.. max.)
(or 1 to 2 x CEL 18-..) + 1 x CAL 18-11
(1) The total number of N.O. or N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 2. CE 5-.. auxiliary contacts not allowed in mounting position 5.
(2) The total number of N.O. or N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 3. CE 5-.. auxiliary contacts not allowed in mounting position 5.
(3) The total number of N.O. or N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 5.
(4) CE 5-.. auxiliary contacts not allowed in mounting position 5.
(5) 2 N.C. CA 5-.. auxiliary contacts maximum in mounting position 5.
(6) A 9, A 12, A 16-30-01 in mounting position 5, TP..DA not allowed.
Contactor and main accessories For mounting position diagram, see "Technical Data"
(other accessories available)
The accessories provided for the
A 50 ... A 110 contactors can be
used for the AF 50 ... AF 110 types.
2
Low Voltage Products 2/9
1SBC100122C0202
E1685D
RV 5/..
CAL 5-11
TA 25 DU..
A 26-30-10
CA 5-31M
TP 40 DA
CA 5-10
VE 5-1
Fitting Details - For Ordering Details, see "Motor Protection"
The addition of a thermal O/L relay on the contactor does not prevent fitting of many other accessories as shown below.
Contactor Thermal O/L relays - No mounting kit required, direct mounting
types TA 25 DU.. TA 42 DU TA 75 DU TA 80 DU TA 110 DU
0.1 ... 0.16 to 24 ... 32 A 18 ... 25 to 29 ... 42 A 18 ... 25 to 60 ... 80 A 29 ... 42 to 60 ... 80 A 65 ... 90 to 80 ... 110 A
A 9 ... A 26 TA 25 DU..
A 30, A 40 TA 25 DU.. (1) or TA 42 DU.. (1) –––
A 50 ... A 75 ––TA 75 DU..
A 95, A 110 –––TA 80 DU.. (1) or TA 110 DU.. (1)
(1) According to the current value.
Contactor and O/L relay
The O/L relays provided for the
A 50 ... A 110 contactors can be
used for the AF 50 ... AF 110 types.
A 9 ... A 110 3-pole Contactors
Thermal O/L Relays
3-pole Contactors
3-pole Contactors
2/10 Low Voltage Products
1SBC100122C0202
1SFC101076F0201
1 L13 L2
A1 A2
5 L3
2 T14 T26 T3
UL
E1681D
A 145 ... AF 1650 3-pole Contactors
a.c. Operated - A 145 ... A 300 Contactors
a.c. / d.c. Operated - AF 400 ... AF 1650 Contactors
Application
A 145 ... AF 1650 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V a.c. / 1000 V a.c.
or 220 V d.c. / 600 V d.c. The contactors can also be used for many other applications such as isolation, bypass, capacitor switching, lighting...
Description
The A 145 ... AF 1650 3-pole contactors are of the block type design.
Main poles and auxiliary contact blocks
–3 main poles,
–1 N.O. and 1 N.C. auxiliary contact block (fitted on the left side).
A maximum of 4 auxiliary contact blocks can be fitted on each contactor.
Control circuit:
A 145 ... A 300 contactors: a.c. operated with laminated magnet circuit,
AF 400 ... AF 1650 contactors: a.c. operated, wide voltage range, with electronic coil interface, with laminated magnet circuit.
Contactors AF 400 ... AF 1650 are fitted as standard with an electronic coil interface which accepts a wide control voltage range for a.c. 50/60 Hz
supply or d.c. supply.
Accessories: a wide range of accessories is available.
Variants
electronic coil interface (a.c./d.c. operated) with wide voltage range: AF 145 ... AF 300 contactors.
A 145 ... A 300 contactors main
terminals in line with Tmax circuit
breakers.
Location of function marker.
Location of side-mounted mechanical
interlock (on right or left hand side).
CAL 18-11 side mounted auxiliary contact
block.
Easy access to the terminals.
On-Off position indicator.
Front access to the coil, no need to remov e
power cables when changing coil.
Easy access to the coil terminals.
Clear marking of coil voltages and
frequencies.
Terminal markings according to
IEC 60947-4-1, EN 50005, EN 50012 and
NEMA standards.
Quick release quarter turn scre ws for easy
access to contact inspection.
Terminal shrouds for protection can easily
be fitted from the front.
Screw fixing, top and bottom.
(Screws supplied).
Main ter minals.
Screws and nut insert holders are included.
2
Low Voltage Products 2/11
1SBC100122C0202
1SFC101026F0201
AF 1650-30-11
1SFC101030F0201
1SFC101032F0201
1SFC101031F0201
1SFC101029F0201
A 185-30-11
A 300-30-11
AF 460-30-11
AF 750-30-11
A 145 ... AF 1650 3-pole Contactors
a.c. Operated - A 145 ... A 300 Contactors
a.c. / d.c. Operated - AF 400 ... AF 1650 Contactors
>> AF... contactors with electronic coil interface: electromagnetic compatibility .................................................................. page 2/21
>> Accessory Fitting Details .................................. page 2/12 >> General - Approvals ............................................. section 7
>> Thermal & Electronic O/L Relays ...................... page 2/13 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/65 >> Dimensions ........................................................... section 9
Ordering Details
IEC UL/CSA Auxiliary Type Order code Weight
contacts kg
Rated Rated
3-Phase General
fitted
power current
motor use
400 V θ < 40°Crating rating
AC-3 AC-1
480 V 600 V
state coil voltage
state coil voltage code
Packing
kW A hp A (see table below) (see table below) 1 piece
75 250 100 230 11 A 145-30-11 1SFL 471 001 R 11 3.500
22 A 145-30-22 1SFL 471 001 R 22 3.500
90 275 125 250 11 A 185-30-11 1SFL 491 001 R 11 3.500
22 A 185-30-22 1SFL 491 001 R 22 3.500
110 350 150 300 11 A 210-30-11 1SFL 511 001 R 11 6.100
22 A 210-30-22 1SFL 511 001 R 22 6.100
140 400 200 350 11 A 260-30-11 1SFL 531 001 R 11 6.100
22 A 260-30-22 1SFL 531 001 R 22 6.100
160 500 250 400 11 A 300-30-11 1SFL 551 001 R 11 6.100
22 A 300-30-22 1SFL 551 001 R 22 6.100
200 600 350 550 11 AF 400-30-11 1SFL 577 001 R 11 12.00
22 AF 400-30-22 1SFL 577 001 R 22 12.00
250 700 400 650 11 AF 460-30-11 1SFL 597 001 R 11 12.00
22 AF 460-30-22 1SFL 597 001 R 22 12.00
315 800 500 750 11 AF 580-30-11 1SFL 617 001 R 11 15.00
22 AF 580-30-22 1SFL 617 001 R 22 15.00
400 1050 600 900 11 AF 750-30-11 1SFL 637 001 R 11 15.00
22 AF 750-30-22 1SFL 637 001 R 22 15.00
475 1350 800 1350 11 AF 1350-30-11 1SFL 657 001 R 11 34.00
22 AF 1350-30-22 1SFL 657 001 R 22 34.00
560 1650 900 1650 11 AF 1650-30-11 1SFL 677 001 R 11 35.00
22 AF 1650-30-22 1SFL 677 001 R 22 35.00
Coil voltages and codes: A 145 ... A 300
Voltage Voltage Code
V - 50Hz V - 60Hz
24 24 8 1
48 48 8 3
110 110 ... 120 8 4
220 ... 230 230 ... 240 8 0
230 ... 240 240 ... 260 8 8
380 ... 400 400 ... 415 8 5
400 ... 415 415 ... 440 8 6
Other voltages: page 0/1.
Coil voltages and codes: AF 400 ... AF 750
Voltage Voltage Code
V - 50/60Hz V d.c.
–24 ... 60 6 8 (1)
48 ... 130 48 ... 130 6 9
100 ... 250 100 ... 250 7 0
250 ... 500 250 ... 500 7 1
(1) The connection polarities indicated close to the coil terminals
must be respected: A1 for the positive pole and A2 for the
negative pole.
Coil voltages and codes: AF 1350, AF 1650
Voltage Voltage Code
V - 50/60Hz V d.c.
100 ... 250 100 ... 250 7 0
3-pole Contactors
3-pole Contactors
2/12 Low Voltage Products
1SBC100122C0202
1 L13 L2
A1A2
5 L3
2 T14 T26 T3
UL
TA 200 DU ...
E1686D
VM 300H
CAL 18-11B
A 145-30-11
LT...-AC
CAL 18-11..
LW...
LZ...
BB
BB
BB B
BB B
BB
B B
BBBB
Fitting Details - For Ordering Details, see "Accessories"
Contactor Main Available Side mounted accessories (Front mounted Mechanical Mounting and positioning
types poles auxiliary accessories are not available on large A..., AF... contactors) interlock units Factory mounted auxiliary contacts
contacts
Add-on auxiliary contact blocks (for two horizontal Add-on CAL 18-11 auxiliary contacts
CAL 18-11, CAL 18-11B (3) mounted contactors)
Add-on CAL 18-11B auxiliary contact s
Contactors + auxiliary contact blocks
A 145 ... A 300 3 0 1 1 1 x CAL 18-11 +2 x CAL 18-11B
AF 145 ... AF 1650 3 0 1 1
A 145 ... A 300 3 0 2 2 –2 x CAL 18-11B
AF 145 ... AF 1650 3 0 2 2
Contactors with mechanical interlocking + auxiliary contact blocks
A 145 ... A 185 3 0 1 1 2 x CAL 18-11 (1) +3 x CAL 18-11B (1) +VM ...H (2)
AF 145 ... AF 185 3 0 1 1
A 145 ... A 185 3 0 2 2 –3 x CAL 18-11B (1) +VM ...H (2)
AF 145 ... AF 185 3 0 2 2
A 210 ... A 300 3 0 1 1 2 x CAL 18-11 (1) +4 x CAL 18-11B (1) +VM ...H (2)
AF 210 ... AF 1650 3 0 1 1
A 210 ... A 300 3 0 2 2 –4 x CAL 18-11B (1) +VM ...H (2)
AF 210 ... AF 1650 3 0 2 2
(1) Total number of auxiliary contact blocks for the two contactors. (2) Interlock type, according to the contactor ratings (see "Accessories").
(3) The CEL 18-.. auxiliary contact blocks can replace the CAL 18-11 and CAL 18-11B. Though, no auxiliary contact block can be mounted outside the CEL 18-..
Contactor and main accessories
(other accessories available)
A 145 ... AF 1650 3-pole Contactors
Main Accessories
2
Low Voltage Products 2/13
1SBC100122C0202
1 L13 L2
A1 A2
5 L3
2 T14 T26 T3
UL
LT...-AC
CAL 18-11..
CAL 18-11B
VM 300H
A 145-30-11
TA 200 DU ...
E1687D
LZ...
LW...
Fitting Details - For Ordering Details, see "Motor Protection"
The addition of a thermal or electronic O/L relay on the contactor does not prevent fitting of many other accessories as shown below.
Contactor Thermal O/L relays
types TA 200 DU.. (1) TA 450 DU (2)
80 ... 110 to 150 ... 200 A 130 ... 185 to 220 ... 310 A
Electronic O/L relays
E 200 DU.. (1) E 320 DU.. (1) E 500 DU.. (2) E 800 DU.. (2) E 1250 DU.. (1)
60 ... 200 A 100 ... 320 A 150 ... 500 A 250 ... 800 A 375 ... 1250 A
A 145, A 185 TA 200 DU..
or E 200 DU..
A 210 ... A 300 TA 450 DU..
or E 320 DU..
AF 400, AF 460 ––E 500 DU..
AF 580, AF 750 –––E 800 DU
AF 1350, AF 1650 ––––E 1250 DU
(1) No mounting kit required, direct mounting
(2) Mounting kit required (see "Motor Protection")
Contactor and O/L relay
A 145 ... AF 1650 3-pole Contactors
Thermal & Electronic O/L Relays
3-pole Contactors
3-pole Contactors
2/14 Low Voltage Products
1SBC100122C0202
AL 9-30-10
AL 9-30-10
2T1
4T2
6T3
14NO
1L1
3L2
5L3 13NO
2- 3- 4- 5-
2-
3-
4-
5-
1SBC500001F0000
A1+
-A2
24V DC
R81
AE50-30
A1
A2
V
Hz
50
60
80
1 L1 3 L2 5 L3
2 T1 4 T2 6 T3
6-
1-
2-
3-
4-
5-
6-
1-
2-
3-
4-
5-
E1679D
AL 9 ... AE 110, AL..Z... and TAL 9 ... TAE 110
3-pole Contactors
d.c. Operated
Application
AL... and AE... contactors, as well as TAL... and TAE... versions, are mainly used for controlling 3-phase motors and more generally for controlling
power circuits up to 690 V a.c. (1000 V a.c. for AE... and TAE... contactors) or 220 / 440 V d.c.
Description
3-pole contactors of the block type design.
The AL... contactors are fitted with low consumption d.c. coils:
AL 9 ... AL 16 contactors: 3 W (pull-in and holding)
AL 26 ... AL 40 contactors: 3.5 W (pull-in and holding)
AL 9Z ... AL 16Z contactors: with very low consumption d.c. coil 2.4 W (pull-in and holding)
Contactors are thus suitable for a direct control by PLC transistor outputs, without the use of an interface relay.
The TAL... version offers a large coil voltage range.
The AE... contactors are fitted with standard double-winding d.c. coils.
The TAE... version offers a large coil voltage range.
AE 50 ... AE 110, TAE 50 ... TAE 110
Add-on lagging contact (factory mounted) for insertion of the"holding" winding.
AE 50 ... AE 110, TAE 50 ... TAE 110
N.C. lagging auxiliary contact block with built-in varistor:
CDL 5-01 type fitted on AE 50 ... AE 75 and TAE 50,
TAE 75 contactors
CCL 18-01 type fitted on AE 95, AE 110 and TAE 95,
TAE 110 contactors
*Extra RV 5 (or RT 5) surge suppressor can be added on
to the "Pull-in" winding, if required.
Please order separately (see "Accessories").
A1
CDL 5 / CCL 18
Varistor
A2
A3
B2 = Holding
U
c
(d.c.)
B1 = Pull-in
E0299DG2
U
Surge
suppressor
*
AL9 ... AL 40, TAL 9 ... TAL 40
The general design is identical to that of A 9 ... A 40 contactors, only the depth is increased.
Main poles and auxiliary contact blocks
AL 9 ... AL 40 and TAL 9 ... TAL 40 1-stack contactors:
–3 main poles,
–1 built-in auxiliary contact,
front or side mounted add-on auxiliary contact blocks
(only front mounted for AL..Z... version).
AE 50 ... AE 110 and TAE 50 ... TAE 110 contactors:
–3 main poles,
front or side mounted add-on auxiliary contact blocks.
Control circuit: d.c. operated.
The polarity on the coil terminals (A1+ and A2-) must be respected
for AL..., AL..Z... and TAL... contactors.
Accessories: a wide range of accessories is available.
AL 9 ... AL 40 2-stack contactors:
– 1st stack with 3 main poles
– 2nd stack with 4 built-in auxiliary contacts.
The built-in auxiliary contact elements are mechanically linked
Larger d.c. operated contactors:
use AF 145 ... AF 1650 types.
Variants
electronic coil interface (a.c./d.c. operated): AF 50 ... AF 110 contactors.
4-pole: AL 9 ... AL 26 contactors and TAL 9 ... TAL 26 contactors (with 4 N.O. or 2 N.O. + 2 N.C. main poles)
AE 45 ... AE 75 contactors (with 4 N.O. or 2 N.O. + 2 N.C. main poles) and TAE 45 ... TAE 75 contactors (with 4 N.O. main poles).
AL 9 ... AE 110 and TAL 9 ... TAE 110 contactors specific design (see A 9 ... A 110 contactors for general design)
A1
A2
2
Low Voltage Products 2/15
1SBC100122C0202
AL 16-30-10
1SBC5 8782 4F0301
AL 40-30-10
1SBC5 8783 4F0301
AE 50-30-00
AE 95-30-00
1SBC5 9208 4F0304
1SBC5 9205 4F0303
AL 9 ... AE 110 and AL..Z... 3-pole Contactors
d.c. Operated
Ordering Details
AL 9 ... AE 110 contactors
IEC UL/CSA Auxiliary Type Order code Weight
contacts kg
Rated Rated
3-Phase General
fitted
power current
motor use 1st stack 2nd stack
400 V θ < 40°Crating rating
AC-3 AC-1
480 V 600 V
state coil voltage
state coil voltage code
Packing
kW A hp A (see table below) (see table below) 1 piece
1– –– AL 9-30-10 1SBL 143 001 R 10 0.520
425521 1 AL 9-30-01 1SBL 143 001 R 01 0.520
–– 22 AL 9-30-22 1SBL 143 001 R 22 0.580
1– –– AL 12-30-10 1SBL 163 001 R 10 0.520
5.5 27 7.5 25 1 AL 12-30-01 1SBL 163 001 R 01 0.520
–– 22 AL 12-30-22 1SBL 163 001 R 22 0.580
1– –– AL 16-30-10 1SBL 183 001 R 10 0.520
7.5 30 10 30 1 AL 16-30-01 1SBL 183 001 R 01 0.520
–– 22 AL 16-30-22 1SBL 183 001 R 22 0.580
1– –– AL 26-30-10 1SBL 243 001 R 10 0.750
11 45 20 40 1 AL 26-30-01 1SBL 243 001 R 01 0.750
–– 22 AL 26-30-22 1SBL 243 001 R 22 0.810
1– –– AL 30-30-10 1SBL 283 001 R 10 0.850
15 55 25 50 1 AL 30-30-01 1SBL 283 001 R 01 0.850
–– 22 AL 30-30-22 1SBL 283 001 R 22 0.910
1– –– AL 40-30-10 1SBL 323 001 R 10 0.850
18.5 60 30 60 1 AL 40-30-01 1SBL 323 001 R 01 0.850
–– 22 AL 40-30-22 1SBL 323 001 R 22 0.910
22 100 40 80 –– –– AE 50-30-00 1SBL 359 001 R 00 1.200
11 –– AE 50-30-11 1SBL 359 001 R 11 1.240
30 115 60 90 –– –– AE 63-30-00 1SBL 379 001 R 00 1.200
11 –– AE 63-30-11 1SBL 379 001 R 11 1.240
37 125 60 105 –– –– AE 75-30-00 1SBL 419 001 R 00 1.200
11 –– AE 75-30-11 1SBL 419 001 R 11 1.240
45 145 60 125 –– –– AE 95-30-00 1SFL 439 001 R 00 2.040
11 –– AE 95-30-11 1SFL 439 001 R 11 2.070
55 160 75 140 –– –– AE 110-30-00 1SFL 459 001 R 00 2.040
11 –– AE 110-30-11 1SFL 459 001 R 11 2.070
AL 9Z ... AL 16Z contactors
4255211– –– AL 9Z-30-10 1SBL 144 001 R 10 0.520
–1 –– AL 9Z-30-01 1SBL 144 001 R 01 0.520
5.5 27 7.5 25 1– –– AL 12Z-30-10 1SBL 164 001 R 10 0.520
–1 –– AL 12Z-30-01 1SBL 164 001 R 01 0.520
7.5 30 10 30 1– –– AL 16Z-30-10 1SBL 184 001 R 10 0.520
–1 –– AL 16Z-30-01 1SBL 184 001 R 01 0.520
Coil voltages and codes: AL.../AE... AL..Z...
Voltage Code Code
V - d.c.
12 8 0
24 8 1 1 5
42 8 2
48 8 3 2 0
50 2 1
60 8 4
75 8 5
110 8 6
125 8 7
220 8 8
240 8 9
250 3 8
>> Accessory Fitting Details .................................. page 2/17 >> General - Approvals ............................................. section 7
>> Thermal O/L Relays ............................................. page 2/9 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/64 >> Dimensions ........................................................... section 9
3-pole Contactors
3-pole Contactors
2/16 Low Voltage Products
1SBC100122C0202
TAL 16-30-10
1SBC5 9018 4F0301
TAL 40-30-10
1SBC5 9022 4F0304
TAE 95-30-00
TAE 50-30-00
1SBC5 8375 4F0304
1SBC5 9206 4F0303
Ordering Details
IEC UL/CSA Auxiliary Type Order code Weight
contacts kg
Rated Rated
3-Phase General
fitted
power current
motor use 1st stack 2nd stack
400 V θ < 40°Crating rating
AC-3 AC-1
480 V 600 V
state coil voltage
state coil voltage code
Packing
kW A hp A (see table below) (see table below) 1 piece
4255211– –– TAL 9-30-10 1SBL 143 061 R 10 0.520
–1 –– TAL 9-30-01 1SBL 143 061 R 01 0.520
5.5 27 7.5 25 1– –– TAL 12-30-10 1SBL 163 061 R 10 0.520
–1 –– TAL 12-30-01 1SBL 163 061 R 01 0.520
7.5 30 10 30 1– –– TAL 16-30-10 1SBL 183 061 R 10 0.520
–1 –– TAL 16-30-01 1SBL 183 061 R 01 0.520
11 45 20 40 1– –– TAL 26-30-10 1SBL 243 061 R 10 0.750
–1 –– TAL 26-30-01 1SBL 243 061 R 01 0.750
15 55 25 50 1– –– TAL 30-30-10 1SBL 283 061 R 10 0.850
–1 –– TAL 30-30-01 1SBL 283 061 R 01 0.850
18.5 60 30 60 1– –– TAL 40-30-10 1SBL 323 061 R 10 0.850
–1 –– TAL 40-30-01 1SBL 323 061 R 01 0.850
22 100 40 80 –– –– TAE 50-30-00 1SBL 359 061 R 00 1.200
11 –– TAE 50-30-11 1SBL 359 061 R 11 1.240
37 125 60 105 –– –– TAE 75-30-00 1SBL 419 061 R 00 1.200
11 –– TAE 75-30-11 1SBL 419 061 R 11 1.240
45 145 60 125 –– –– TAE 95-30-00 1SFL 439 061 R 00 2.040
11 –– TAE 95-30-11 1SFL 439 061 R 11 2.070
55 160 75 140 –– –– TAE 110-30-00 1SFL 459 061 R 00 2.040
11 –– TAE 110-30-11 1SFL 459 061 R 11 2.070
Coil voltages and codes: TAL... and TAE...
Voltage Code
V - d.c.
17 ... 32 5 1
25 ... 45 5 2
36 ... 65 5 4
42 ... 78 5 8
50 ... 90 5 5
77 ... 143 6 2
90 ... 150 6 6
152 ... 264 6 8
Other voltages: please consult us.
Voltage tolerances (-15 % and +10 %) included in the
Uc min. and Uc max. values.
>> Accessory Fitting Details .................................. page 2/17 >> General - Approvals ............................................. section 7
>> Thermal O/L Relays ............................................. page 2/9 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/64 >> Dimensions ........................................................... section 9
TAL 9 ... TAE 110 3-pole Contactors
d.c. Operated with Large Coil Voltage Range
!
2
Low Voltage Products 2/17
1SBC100122C0202
Accessory Fitting Details for AL 9 ... AL 40, AL..Z... and TAL 9 ... TAL 40 Contactors
Many configurations of accessories are possible depending on whether these are front mounted or side mounted.
Contactor configuration Front mounted accessories Side mounted accessories (7)
Main Available
poles auxiliary
contacts
Contactor Auxiliary contact Auxiliary contact Auxiliary contact Auxiliary contact Interlock unit
types 1-pole CA 5-.. 4-pole CA 5-.. 1-pole CE 5-.. 2-pole CAL 5-11 VM 5-.. or VE 5-..
AL 9 ... AL 16 3 0 1 0 1 to 4 x CA 5-..(1) or 1 x CA 5-.. (4-pole) (1) or 1 to 2 x CE 5-.. (2) or 1 x CAL 5-11 +
1 x VM 5-1(3) or VE 5-1(3)(4)
AL 9 ... AL 16 3 0 0 1
AL 9 ... AL 16 3 0 2 2 –– 1 x VM 5-1 or VE 5-1
AL 26 3 0 1 0 1 to 4 x CA 5-..(5) or 1 x CA 5-.. (4-pole) (5) or 1 to 2 x CE 5-.. or 1 x CAL 5-11 +1 x VM 5-1 or VE 5-1
AL 26 3 0 0 1
AL 26 3 0 2 2 –– ––1 x VM 5-1 or VE 5-1
AL 30, AL 40 3 0 1 0 1 to 5 x CA 5-..(5) or 1 x CA 5-.. (4-pole) (5) or 1 to 2 x CE 5-.. or 1 x CAL 5-11 +1 x VM 5-1 or VE 5-1(4)
AL 30, AL 40 3 0 0 1 +1 x 1-pole CA 5-..
AL 30, AL 40 3 0 2 2 –– ––1 x VM 5-1 or VE 5-1
AL 9Z ... AL 16Z (7)
30 10 1 to 2 x CA 5-..(1) or 1 to 2 x CE 5-.. (2) ––
AL 9Z ... AL 16Z (7)
30 01 1 to 2 x CA 5-..(1) or 1 to 2 x CE 5-.. (2) or 1 x VM 5-1
TAL 9 ... TAL 16
30 10 1 to 4 x CA 5-..(1) or 1 x CA 5-.. (4-pole) (1) or 1 to 2 x CE 5-.. (2) or 1 x CAL 5-11 +
1 x VM 5-1(6) or VE 5-1(6)(4)
TAL 9 ... TAL 16
30 01
TAL 26 3 0 1 0 1 to 4 x CA 5-..(5) or 1 x CA 5-.. (4-pole) (5) or 1 to 2 x CE 5-.. or 1 x CAL 5-11 +1 x VM 5-1 or VE 5-1
TAL 26 3 0 0 1
TAL 30, TAL 40
30 10 1 to 5 x CA 5-..(5) or 1 x CA 5-.. (4-pole) (5) or 1 to 2 x CE 5-.. or 1 x CAL 5-11 +1 x VM 5-1 or VE 5-1(4)
TAL 30, TAL 40
30 01 +1 x 1-pole CA 5-..
(1) 2 N.C. auxiliary contacts maximum in all mounting positions except 5. In position 5 no N.C. auxiliary contact allowed.
(2) CE 5-.. auxiliary contacts not allowed in position 5.
(3) When VM5-1 or VE5-1 interlock unit is used with auxiliary contact CAL 5-11 the control voltage is limited to 0.9 Uc ... 1.1 Uc.
(4) With VE5-1 interlock unit, a maximum of 3 N.O. auxiliary contacts are permitted.
(5) 2 N.C. auxiliary contacts maximum in mounting position 5.
(6) When VM5-1 or VE5-1 interlock unit is used, CAL 5-11 auxiliary contact is not permitted in any position.
(7) Not allowed in mounting position 1+30°.
Accessory Fitting Details for AE 50 ... AE 110 and TAE 50 ... TAE 110 Contactors
Many configurations of accessories are possible depending on whether these are front mounted or side mounted.
Contactor configuration Front mounted accessories Side mounted accessories
Main Available
poles auxiliary
contacts
Auxiliary contact Auxiliary contact
Contactor 1-pole CA 5-.. Auxiliary contact Pneumatic Timer 2-pole CAL.. Interlock unit
types (or 1-pole CE 5-..) 4-pole CA 5-.. TP .. A (or 1-pole CEL 18-..) VE 5-2
AE 50 ... AE 75 3 0 0 0 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 x CAL 5-11 or 1 x VE 5-2
TAE 50, 75 3 0 0 0
(1 to 5 x CE 5-.. max.) (1) + 2 x 1-pole CA 5-.. or CE 5-.. (1)
+2 x CA 5-.. (1-pole)
AE 50 ... AE 75 3 0 1 1 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A ––
TAE 50, 75 3 0 1 1
(1 to 5 x CE 5-.. max.) (1) + 2 x 1-pole CA 5-.. or CE 5-.. (1)
+2 x CA 5-.. (1-pole)
AE 95, 110 3 0 0 0 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) +1 x CAL 18-11 or 1 x VE 5-2
TAE 95, 110 3 0 0 0
(1 to 5 x CE 5-.. max.) (1) + 2 x 1-pole CA 5-.. or CE 5-.. (1)
(or 1 x CEL 18-..)
AE 95, 110 3 0 1 1 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) ––
TAE 95, 110 3 0 1 1
(1 to 5 x CE 5-.. max.) (1) + 2 x 1-pole CA 5-.. or CE 5-.. (1)
(1) The total number of N.O. or N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 5.
AL 9 ... AE 110, AL..Z... and TAL 9 ... TAE 110
3-pole Contactors
Main Accessories
>> Mounting Positions: see "Technical Data" .............................................. page 2/72 >> Accessory Ordering Details ....................................................................... section 4
3-pole Contactors
3-pole Contactors
2/18 Low Voltage Products
1SBC100122C0202
c
l
i
m
a
t
i
c
p
r
o
o
f
e
d
Z
A
F
7
5
c
l
i
m
a
t
i
c
p
r
o
o
f
e
d
Z
A
F
7
5
A1
A2
48-130 V
50-60 HZ
DC
R 70
AF75-30
1 L1 3 L2 5 L3
2 T1 4 T2 6 T3
6-
1-
2-
3-
4-
5-
6-
1-
2-
3-
4-
5-
E1683D
AF 50 ... AF 110 3-pole Contactors
Electronic Coil Interface
a.c. / d.c. Operated - Wide Voltage Range
Application
AF 50 ... AF 110 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V a.c. and 220 V d.c.
The contactors can also be used for many other applications such as bypass, capacitor switching, lighting, d.c. power circuits...
The AF... contactors are fitted with an electronic coil interface which accepts a wide control voltage range, on a.c. 50/60 Hz or d.c. supplies. The same
contactor can accept various supply voltages according to the different countries where the electrical equipment will be installed, or some fluctuation
in the control voltage due to the local supply or network.
The AF... contactors are also fully suitable for operation in a.c. or d.c. control circuit liable to voltage interruptions or voltage dip risks.
Description
The AF 50 ... AF 110 3-pole contactors are of the block type design.
Main poles and auxiliary contact blocks
–3 main poles,
front and side mounted add-on auxiliary contact blocks.
Electronic control:
The contactors are fitted with an electronic interface that very precisely controls the voltage to the coil. The electronic control circuit always works
using d.c. current through the coil and in a.c. operation the current is rectified before being applied to the coil. To achieve the levels of the currents
required for making and holding respectively, the voltage is pulsed across the coil with the aid of a transistor. The pulsing also implies that the current
in the coil can be optimally regulated all the time relatively independently of the voltage level. The function is controlled by a specific integrated circuit
developed by ABB.
Advantages
Wide voltage range, e.g. 100 ... 250 V a.c. and d.c.,
Can manage large voltage variations,
Reduced power consumption,
Very distinct closing and opening,
Noise free,
Can withstand voltage interruptions or voltage dips in the control supply (< 20 ms).
Accessories: a wide range of accessories is available.
The accessories provided for the A 50 ... A 110 contactors can be used for the AF 50 ... AF 110 types.
AF... contactors specific design (see A... contactors for general design).
Operating diagram
Contactor
closed
Contactor
open
Normal range
Operational limits
Control
voltage
Position
U
c
min. U
c
max.
E1688DG
0.85 U
c
min. 1.1 U
c
max.
0.55 U
c
min.
Control circuit with
electronic coil interface.
2
Low Voltage Products 2/19
1SBC100122C0202
AF 50-30-00
1SBC5 8271 4F0304
AF 110-30-11
1SFC101028F0201
Ordering Details
IEC UL/CSA Auxiliary Type Order code Weight
contacts kg
Rated Rated
3-Phase General
fitted
power current
motor use 1st stack 2nd stack
400 V θ < 40°Crating rating
AC-3 AC-1
480 V 600 V
state coil voltage
state coil voltage code
Packing
kW A hp A (see table below) (see table below) 1 piece
22 100 40 80 –– –– AF 50-30-00 1SBL 357 001 R 00 1.180
11 –– AF 50-30-11 1SBL 357 001 R 11 1.220
30 115 60 90 –– –– AF 63-30-00 1SBL 377 001 R 00 1.180
11 –– AF 63-30-11 1SBL 377 001 R 11 1.220
37 125 60 105 –– –– AF 75-30-00 1SBL 417 001 R 00 1.180
11 –– AF 75-30-11 1SBL 417 001 R 11 1.220
45 145 60 125 –– –– AF 95-30-00 1SFL 437 001 R 00 2.030
11 –– AF 95-30-11 1SFL 437 001 R 11 2.070
55 160 75 140 –– –– AF 110-30-00 1SFL 457 001 R 00 2.030
11 –– AF 110-30-11 1SFL 457 001 R 11 2.070
Coil voltages and codes
Voltage Voltage Code
V - 50/60Hz V d.c.
20 ... 60 7 2 (1)
48 ... 130 48 ... 130 6 9
100 ... 250 100 ... 250 7 0
(1) The connection polarities indicated close to the coil terminals
must be respected: A1 for the positive pole and A2 for the
negative pole.
Electromagnetic compatibility
AF... contactors comply with IEC 60947-1, 60947-4-1 and EN 60947-1, 60947-4-1.
Notice: This product has been designed for environment A. Use of this product in environment B may cause
unwanted electromagnetic disturbances in which case the user may be required to take adequate mitigation
measures.
Definitions:
Environment A: "Mainly relates to low-voltage non public or industrial networks/locations /installations (see
EN 50082-2 article 4) including highly disturbing sources".
Environment B: "Mainly relates to low-voltage public networks (see EN 50082-1 article 5) such as residential,
commercial and light industrial locations/installations. Highly disturbing sources such as arc welders are not
covered by this environment".
>> Accessory Fitting Details .................................... page 2/8 >> General - Approvals ............................................. section 7
>> Thermal O/L Relays ............................................. page 2/9 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/64 >> Dimensions ........................................................... section 9
3-pole Contactors
3-pole Contactors
AF 50 ... AF 110 3-pole Contactors
Electronic Coil Interface
a.c. / d.c. Operated - Wide Voltage Range
2/20 Low Voltage Products
1SBC100122C0202
AF 145 ... AF 1650 3-pole Contactors
Electronic Coil Interface
a.c. / d.c. Operated - Wide Voltage Range
Application
AF 145 ... AF 1650 contactors are mainly used for controlling 3-phase motors and generally for controlling power circuits up to 690 V a.c. / 1000 V a.c.
or 220 V d.c. / 600 V d.c.
The contactors can also be used for many other applications such as bypass, capacitor switching, lighting, d.c. power circuits...
The AF... contactors are fitted with an electronic coil interface which accepts a wide control voltage range, on a.c. 50/60 Hz or d.c. supplies. The same
contactor can accept various supply voltages according to the different countries where the electrical equipment will be installed, or some fluctuation
in the control voltage due to the local supply or network.
The AF... contactors are also fully suitable for operation in a.c. or d.c. control circuit liable to voltage interruptions or voltage dip risks.
Description
The AF 145 ... AF 1650 3-pole contactors are of the block type design.
Main poles and auxiliary contact blocks
– 3 main poles,
– 1 N.O. and 1 N.C. auxiliary contact block (fitted on the left side).
A maximum of 4 auxiliary contact blocks can be fitted on each contactor.
Electronic control:
The contactors are fitted with an electronic interface that very precisely controls the voltage to the coil. The electronic control circuit always works
using d.c. current through the coil and in a.c. operation the current is rectified before being applied to the coil. To achieve the levels of the currents
required for making and holding respectively, the voltage is pulsed across the coil with the aid of a transistor. The pulsing also implies that the current
in the coil can be optimally regulated all the time relatively independently of the voltage level. The function is controlled by a specific integrated circuit
developed by ABB.
Advantages
Wide voltage range, e.g. 100 ... 250 V a.c. and d.c.,
Can manage large voltage variations,
Reduced power consumption,
Very distinct closing and opening,
Noise free,
Can withstand voltage interruptions or voltage dips in the control supply (< 20 ms).
Control inputs
The large sizes AF 400 ... AF 1650 are equipped with low voltage inputs for control, for example by a PLC.
Accessories: a wide range of accessories is available.
AF... contactors specific design (see A... contactors for general design)
Operating diagram
Control inputs (AF 400 ... AF 1650)
Control circuit
with electronic coil
interface.
Contactor
closed
Contactor
open
Normal range
Operational limits
Control
voltage
Position
U
c
min. U
c
max.
E1688DG
0.85 U
c
min. 1.1 U
c
max.
0.55 U
c
min.
E1689DG
ON
OFF_N
COMMON
ON
OFF
24V
0V
+
A2A1
Supply voltage
X5
1
2
3
Contactor
2
Low Voltage Products 2/21
1SBC100122C0202
1SFC101026F0201
AF 1650-30-11
1SFC101044F0201
1SFC101032F0201
1SFC101031F0201
AF 300-30-11
AF 460-30-11
AF 750-30-11
>> Accessory Fitting Details .................................. page 2/12 >> General - Approvals ............................................. section 7
>> Thermal & Electronic O/L Relays ...................... page 2/13 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/65 >> Dimensions ........................................................... section 9
3-pole Contactors
3-pole Contactors
AF 145 ... AF 1650 3-pole Contactors
Electronic Coil Interface
a.c. / d.c. Operated - Wide Voltage Range
Ordering Details
IEC UL/CSA Auxiliary Type Order code Weight
contacts kg
Rated Rated
3-Phase General
fitted
power current
motor use
400 V θ < 40°Crating rating
AC-3 AC-1
480 V 600 V
state coil voltage
state coil voltage code
Packing
kW A hp A (see table below) (see table below) 1 piece
75 250 100 230 11 AF 145-30-11 1SFL 477 001 R 11 3.600
22 AF 145-30-22 1SFL 477 001 R 22 3.600
90 275 125 250 11 AF 185-30-11 1SFL 497 001 R 11 3.600
22 AF 185-30-22 1SFL 497 001 R 22 3.600
110 350 150 300 11 AF 210-30-11 1SFL 517 001 R 11 6.200
22 AF 210-30-22 1SFL 517 001 R 22 6.200
140 400 200 350 11 AF 260-30-11 1SFL 537 001 R 11 6.200
22 AF 260-30-22 1SFL 537 001 R 22 6.200
160 500 250 400 11 AF 300-30-11 1SFL 557 001 R 11 6.200
22 AF 300-30-22 1SFL 557 001 R 22 6.200
200 600 350 550 11 AF 400-30-11 1SFL 577 001 R 11 12.00
22 AF 400-30-22 1SFL 577 001 R 22 12.00
250 700 400 650 11 AF 460-30-11 1SFL 597 001 R 11 12.00
22 AF 460-30-22 1SFL 597 001 R 22 12.00
315 800 500 750 11 AF 580-30-11 1SFL 617 001 R 11 15.00
22 AF 580-30-22 1SFL 617 001 R 22 15.00
400 1050 600 900 11 AF 750-30-11 1SFL 637 001 R 11 15.00
22 AF 750-30-22 1SFL 637 001 R 22 15.00
475 1350 800 1350 11 AF 1350-30-11 1SFL 657 001 R 11 34.00
22 AF 1350-30-22 1SFL 657 001 R 22 34.00
560 1650 900 1650 11 AF 1650-30-11 1SFL 677 001 R 11 35.00
22 AF 1650-30-22 1SFL 677 001 R 22 35.00
Coil voltages and codes: AF 145 ... AF 300
Voltage Voltage Code
V - 50/60Hz V d.c.
–20 ... 60 7 2 (1)
48 ... 130 48 ... 130 6 9
100 ... 250 100 ... 250 7 0
Coil voltages and codes: AF 400 ... AF 750
Voltage Voltage Code
V - 50/60Hz V d.c.
–24 ... 60 6 8 (1)
48 ... 130 48 ... 130 6 9
100 ... 250 100 ... 250 7 0
250 ... 500 250 ... 500 7 1
Coil voltages and codes: AF 1350, AF 1650
Voltage Voltage Code
V - 50/60Hz V d.c.
100 ... 250 100 ... 250 7 0
Electromagnetic compatibility
AF... contactors comply with IEC 60947-1, 60947-4-1 and EN 60947-1, 60947-4-1.
Notice: This product has been designed for environment A. Use of this product in environment B may cause unwanted electromagnetic
disturbances in which case the user may be required to take adequate mitigation measures.
Definitions:
Environment A: "Mainly relates to low-voltage non public or industrial networks/locations/installations (see EN 50082-2 article 4) including highly
disturbing sources".
Environment B: "Mainly relates to low-voltage public networks (see EN 50082-1 article 5) such as residential, commercial and light industrial
locations/installations. Highly disturbing sources such as arc welders are not covered by this environment".
(1) The connection
polarities indicated
close to the coil
terminals must be
respected: A1 for the
positive pole and
A2 for the negative
pole.
2/22 Low Voltage Products
1SBC100122C0202
A 9-40-00
1SBC5 7314 2F0301
A 45-40-00
1SBC5 8087 3F0301
A 9-22-00
1SBC5 7397 2F0302
1
2
R5
R6
R3
R4
7
8
E0300D
>> Accessory Fitting Details .................................. page 2/23 >> General - Approvals ............................................. section 7
>> Accessory Ordering Details ................................ section 4 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/64 >> Dimensions ........................................................... section 9
A 9 ... A 75 4-pole Contactors
a.c. Operated
Ordering Details
IEC UL/CSA Auxiliary contacts Type Order code Weight
fitted kg
AC-1 General
Rated use
current rating
θ < 40 °C600 V state coil voltage state coil voltage code Packing
AA (see table below) (see table below) 1 piece
4 N.O. main poles
25 21 A 9-40-00 1SBL 141 201 R 00 0.340
30 30 A 16-40-00 1SBL 181 201 R 00 0.340
45 40 A 26-40-00 1SBL 241 201 R 00 0.610
70 80 A 45-40-00 1SBL 331 201 R 00 1.390
100 80 A 50-40-00 1SBL 351 201 R 00 1.390
125 105 A 75-40-00 1SBL 411 201 R 00 1.390
2 N.O. + 2 N.C. main poles
25 21 A 9-22-00 1SBL 141 501 R 00 0.340
30 30 A 16-22-00 1SBL 181 501 R 00 0.340
45 40 A 26-22-00 1SBL 241 501 R 00 0.610
70 80 A 45-22-00 1SBL 331 501 R 00 1.400
125 105 A 75-22-00 1SBL 411 501 R 00 1.400
Coil voltages and codes
Voltage Voltage Code
V - 50Hz V - 60Hz
24 24 8 1
48 48 8 3
110 110 ... 120 8 4
220 ... 230 230 ... 240 8 0
230 ... 240 240 ... 260 8 8
380 ... 400 400 ... 415 8 5
400 ... 415 415 ... 440 8 6
Other voltages: page 0/1.
Remark for A 9 ... A 75 4-pole contactors fitted with 2 N.O. + 2 N.C. main poles
These contactors are suitable for controlling 2 separate circuits, i.e. 2 loads with 2 separate supplies, or 1 circuit
comprising 2 separate loads with a single supply (see diagrams below). When the contactor operates there is
no mechanical overlapping between the N.O. poles and the N.C. poles: BREAK before MAKE.
These contactors are not suitable for a reversing starter or star-delta starter or for controlling a single
load from 2 separate supplies.
Block diagrams
Single supply and 2 separate loads 2 separate supplies and 2 separate loads
A1
A2
1
2
R5
R6
R3
R4
7
8
Load
Load
Back-up
supply
Main
supply
E0501DG
A1
A2
1
2
R5
R6
R3
R4
7
8
Load
Load
Supply
E0502DG
!
2
Low Voltage Products 2/23
1SBC100122C0202
A 9 ... A 75 4-pole Contactors
Main Accessories
Accessory Fitting Details
Many configurations of accessories are possible depending on whether these are front mounted or side mounted.
Contactor configuration Front mounted accessories Side mounted accessories
Main Available
poles auxiliary
contacts Auxiliary contact
Contactor 1-pole CA 5-.. Auxiliary contact Pneumatic Timer Auxiliary contact Interlock unit
types (or 1-pole CE 5-..) 4-pole CA 5-.. TP .. A 2-pole CAL 5-11 VM 5-.. or VE 5..
A 9, A 16 4 0 0 0 1 to 4 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 to 2 x CAL 5-11 or 1 x VM 5-1 or VE 5-1
(1 to 2 x CE 5-.. max.) (1)
+1 x CAL 5-11
A 9, A 16 2 2 0 0 (4) 1 to 4 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A (6) +1 to 2 x CAL 5-11
(or 1 x CE 5-..)
(7)
A 26 4 0 0 0 1 to 4 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 to 2 x CAL 5-11 or 1 x VM 5-1 or VE 5-1
(1 to 3 x CE 5-.. max.) (2)
+1 x CAL 5-11
A 26 2 2 0 0 (4) 1 to 4 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 to 2 x CAL 5-11
(or 1 x CE 5-..)
(7)
A 45 ... A 75 4 0 0 0 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 to 2 x CAL 5-11 or 1 x VE 5-2
(1 to 5 x CE 5-.. max.) (3) + 2 x 1-pole CA 5-.. or CE 5-.. (3)
+ 2 x 1-pole CA 5-.. + 1 x CAL 5-11
A 45 ... A 75 2 2 0 0 (5) 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 to 2 x CAL 5-11
(no CE 5-..) + 2 x 1-pole CA 5-.. + 2 x 1-pole CA 5-..
(1) The total number of N.O. or N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 2.
CE 5-.. auxiliary contacts not allowed in mounting position 5.
(2) The total number of N.O. or N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 3.
CE 5-.. auxiliary contacts not allowed in mounting position 5.
(3) The total number of N.O. or N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 5.
(4) 2 x N.C. CA 5-.. auxiliary contacts maximum in mounting position 5.
(5) 2 x N.C. CA 5-.. auxiliary contacts maximum.
(6) A 9-22-00 and A 16-22-00 in mounting position 5: TP..DA not allowed.
(7) CE 5-.. auxiliary contacts not allowed in mounting position 5.
The accessories provided for the A 45 ... A 75 contactors can be used for the AF 45 ... AF 75 types.
4-pole Contactors
4-pole Contactors
>> Mounting Positions: see "Technical Data" .............................................. page 2/72 >> Accessory Ordering Details ....................................................................... section 4
2/24 Low Voltage Products
1SBC100122C0202
EK 175-40-11
1SBC5 7341 2F0301
EK 370-40-11
1SBC5 7343 2F0301
EK 1000-40-11
1SFT98099-069C2
Ordering Details
IEC UL/CSA Auxiliary contacts Type Order code Weight
kg
AC-1 General
Rated use
current rating
θ < 40 °C600 V state coil voltage state coil voltage code Packing
AA (see table below) (see table below) 1 piece
11 EK 110-40-11 SK 824 440- 4.300
200 170 2 2 EK 110-40-22 SK 824 450- 4.350
21 EK 110-40-21 SK 824 440-E 4.350
11 EK 150-40-11 SK 824 441- 4.350
250 200 2 2 EK 150-40-22 SK 824 451- 4.400
21 EK 150-40-21 SK 824 441-E 4.400
11 EK 175-40-11 SK 825 440- 6.600
300 250 2 2 EK 175-40-22 SK 825 448- 6.650
21 EK 175-40-21 SK 825 440-E 6.650
11 EK 210-40-11 SK 825 441- 6.600
350 300 2 2 EK 210-40-22 SK 825 451- 6.650
21 EK 210-40-21 SK 825 441-E 6.650
550 420 11 EK 370-40-11 SK 827 040- 17.20
22 EK 370-40-22 SK 827 042- 17.20
800 540 11 EK 550-40-11 SK 827 041- 17.20
22 EK 550-40-22 SK 827 043- 17.20
1000 11 EK 1000-40-11 SK 827 044- 17.50
22 EK 1000-40-22 SK 827 045- 17.50
- E = 40 ... 400 Hz coil with built-in rectifier.
Coil voltages and codes: EK 110 ... EK 1000
Voltage Voltage Code
V - 50Hz V - 60Hz
48 AD
110 A E
110 120 A F
220 ... 230 *AL *Read 240V 60Hz for
230 ... 240 AM EK 370 ... EK 1000.
380 AN
380 ... 400 440 AP
400 ... 415 AR
Other voltages: page 0/1.
Multi-frequency coils: EK 110 ... EK 210
Voltage Code
V - 40 ... 400Hz
110 ... 120 E F
115 ... 127 EG
220 ... 230 E L
230 ... 240 EM
380 ... 400 E P
400 ... 415 ER
Dual frequency coils (1): EK 370 ... EK 1000
Voltage Voltage Code
V - 50Hz V - 60Hz
110 110 ... 120 E F
110 ... 115 115 ... 127 EG
220 220 ... 240 E L
220 ... 230 230 ... 255 EM
380 380 ... 415 E P
380 ... 400 400 ... 440 ER
(1) Two auxiliary contact blocks maximum per contactor, ambient
temperature < 55 °C and mounting positions 2 and 6 excluded.
>> Accessory Fitting Details .................................. page 2/25 >> General - Approvals ............................................. section 7
>> Accessory Ordering Details ................................ section 4 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/76 >> Dimensions ........................................................... section 9
EK 110 ... EK 1000 4-pole Contactors
a.c. Operated
2
Low Voltage Products 2/25
1SBC100122C0202
A
AC DB
AC E
40 ...
400 Hz
AC E
AC DB
E E
40 ...
400 Hz 40 ...
400 Hz
EE
CCL16-11 E
47
48
35
36
CAL16-11 D
83
84
71
72
CAL16-11 C
61
62
53
54
CAL16-11 B
43
44
31
32
21
22
13
14
CAL16-11 A
AC DB
A B
A
40 ...
400 Hz
E
AE
EK 110 ... EK 1000 4-pole Contactors
Main Accessories
4-pole Contactors
4-pole Contactors
Accessory Fitting Details
Mounting positions of Auxiliary contact types and connecting diagrams
the auxiliary
contacts
(1)
(1) Contact 35-36 used for some
types of EK... contactors
EK... 4-pole contactors
Contactor Main Available Add-on auxiliary Mounting positions
types poles auxiliary contacts contact blocks
2-pole CAL 16-11... Factory mounted auxiliary contacts
Add-on CAL 16-11 auxiliary contacts
a.c. operated, 50 Hz, 60 Hz or 50/60 Hz
1 x CAL 16-11 B
EK 110 ... EK 1000 4 0 1 1 +1 x CAL 16-11 C
+1 x CAL 16-11 D
EK 110 ... EK 1000 4 0 2 2 1 x CAL 16-11 C
+1 x CAL 16-11 D
a.c. operated, 40 ... 400 Hz
EK 110 ... EK 1000 4 0 2 1 1 x CAL 16-11 C
d.c. operated
EK 110 ... EK 1000 4 0 2 1 1 x CAL 16-11 C
EK... 4-pole reversing contactors with VH 145 / VH 300 mechanical and electrical interlock units
"Lefthand" Interlocking "Righthand" Add-on auxiliary Mounting positions
contactors contactors contact blocks
2-pole CAL 16-11... Factory mounted auxiliary contacts
Add-on CAL 16-11 auxiliary contacts
a.c. operated, 50 Hz, 60 Hz or 50/60 Hz
EK 110 ... 150 VH 145 EK 110 ... 150 1 x CAL 16-11 C
EK 175, 210 VH 300 EK 175, 210 +1 x CAL 16-11 D
a.c. operated, 40 ... 400 Hz
EK 110 ... 150 VH 145 EK 110 ... 150
EK 175, 210 VH 300 EK 175, 210
d.c. operated
EK 110 ... 150 VH 145 EK 110 ... 150
EK 175, 210 VH 300 EK 175, 210
2/26 Low Voltage Products
1SBC100122C0202
AL 9-40-00
1SBC5 8793 4F0302
AL 9-22-00
1SBC5 8780 4F0301
1SBC5 8191 3F0303
AE 50-40-00
1
2
R5
R6
R3
R4
7
8
E0300D
AL 9 ... AE 75 4-pole Contactors
d.c. Operated
Ordering Details
IEC UL/CSA Aux. contacts Type Order code Weight
fitted kg
AC-1 General
Rated use
current rating
θ < 40 °C600V state coil voltage state coil voltage code Packing
AA (see table below) (see table below) 1 piece
4 N.O. Main Poles
25 21 AL 9-40-00 1SBL 143 201 R 00 0.520
30 30 AL 16-40-00 1SBL 183 201 R 00 0.520
45 40 AL 26-40-00 1SBL 243 201 R 00 0.750
70 80 AE 45-40-00 1SBL 339 201 R 00 1.430
100 80 AE 50-40-00 1SBL 359 201 R 00 1.430
125 105 AE 75-40-00 1SBL 419 201 R 00 1.430
2 N.O. + 2 N.C. Main Poles
25 21 AL 9-22-00 1SBL 143 501 R 00 0.520
30 30 AL 16-22-00 1SBL 183 501 R 00 0.520
45 40 AL 26-22-00 1SBL 243 501 R 00 0.750
70 80 AE 45-22-00 1SBL 339 501 R 00 1.440
125 105 AE 75-22-00 1SBL 419 501 R 00 1.440
Note: The polarity on the coil terminals (A1+ and A2-) must be respected for AL... contactors.
A1
A2
Coil voltages and codes: AL.. and AE...
Voltage - Uc Code
V d.c.
12 8 0
24 8 1
42 8 2
48 8 3
50 2 1
60 8 4
75 8 5
110 8 6
125 8 7
220 8 8
240 8 9
250 3 8
Remark for 4-pole contactors fitted with 2 N.O. + 2 N.C. main poles
These contactors are suitable for controlling 2 separate circuits, i.e. 2 loads with
2 separate supplies, or 1 circuit comprising 2 separate loads with a single supply
(see diagrams below). When the contactor operates there is no mechanical
overlapping between the N.O. poles and the N.C. poles: BREAK before MAKE.
These contactors are not suitable for a reversing starter or star-delta starter
or for controlling a single load from 2 separate supplies.
Block diagrams
Single supply and 2 separate loads 2 separate supplies and 2 separate loads
>> Accessory Fitting Details .................................. page 2/27 >> General - Approvals ............................................. section 7
>> Accessory Ordering Details ................................ section 4 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/64 >> Dimensions ........................................................... section 9
A1
A2
1
2
R5
R6
R3
R4
7
8
Load
Load
Back-up
supply
Main
supply
E0501DG
A1
A2
1
2
R5
R6
R3
R4
7
8
Load
Load
Supply
E0502DG
!
2
Low Voltage Products 2/27
1SBC100122C0202
Accessory Fitting Details for AL 9 ... AL 26 Contactors
Many configurations of accessories are possible depending on whether these are front mounted or side mounted.
Contactor configuration Front mounted accessories Side mounted accessories (8)
Main Available
poles auxiliary
contacts
Contactor Auxiliary contact Auxiliary contact Auxiliary contact Auxiliary contact Interlock unit
types 1-pole CA 5-.. 4-pole CA 5-.. 1-pole CE 5-.. 2-pole CAL 5-11 VM 5-.. or VE 5-..
AL 9, AL 16 4 0 0 0 1 to 4 x CA 5-..(1) or 1 x CA 5-.. (4-pole) (1) or 1 to 2 x CE 5-.. (2) or 1 x CAL 5-11 +1 x VM 5-1(3) or VE 5-1(3)(4)
AL 9, AL 16 2 2 0 0 1 to 4 x CA 5-..(5) or 1 x CA 5-.. (4-pole) (5) or 1 x CAL 5-11
AL 26 4 0 0 0 1 to 4 x CA 5-..(6) or 1 x CA 5-.. (4-pole) (6) or 1 to 2 x CE 5-.. or 1 x CAL 5-11 +1 x VM 5-1 or VE 5-1
AL 26 2 2 0 0 1 to 4 x CA 5-..(7) or 1 x CA 5-.. (4-pole) (7) or 1 x CAL 5-11
(1) 2 N.C. auxiliary contacts maximum in all mounting positions except 5. In position 5 no N.C. auxiliary contact allowed.
(2) CE 5-.. auxiliary contact not allowed in position 5.
(3) When VM5-1 or VE5-1 interlock unit is used with auxiliary contact CAL 5-11 the control voltage is limited to 0.9 Uc ... 1.1 Uc.
(4) With VE5-1 interlock unit, a maximum of 3 N.O. auxiliary contacts are permitted.
(5) 2 N.C. auxiliary contacts maximum.
(6) 2 N.C. auxiliary contacts maximum in mounting position 5.
(7) N.C. auxiliary contacts are not allowed.
(8) Mounting position 1+30° not allowed.
Accessory Fitting Details for AE 45 ... AE 75 Contactors
Many configurations of accessories are possible depending on whether these are front mounted or side mounted.
Contactor configuration Front mounted accessories Side mounted accessories
Main Available
poles auxiliary
contacts Auxiliary contact
Contactor 1-pole CA 5-.. Auxiliary contact Pneumatic Timer Auxiliary contact Interlock unit
types (or 1-pole CE 5-..) 4-pole CA 5-.. TP .. A 2-pole CAL 5-11 VE 5-2
AE 45 ... AE 75 4 0 0 0 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 x CAL 5-11 or 1 x VE 5-2
(1 to 5 x CE 5-.. max.) (1) + 2 x 1-pole CA 5-.. or CE 5-.. (1)
+ 2 x 1-pole CA 5-..
AE 45 ... AE 75 2 2 0 0 (2) 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 x CAL 5-11
(no CE 5-..) + 2 x 1-pole CA 5-.. + 2 x 1-pole CA 5-..
(1) The total number of N.O. or N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 5.
(2) 2 N.C. auxiliary contacts maximum.
AL 9 ... AE 75 4-pole Contactors
Main Accessories
>> Mounting Positions: see "Technical Data" .............................................. page 2/72 >> Accessory Ordering Details ....................................................................... section 4
4-pole Contactors
4-pole Contactors
2/28 Low Voltage Products
1SBC100122C0202
TAL 9-40-00
1SBC5 9207 4F0304
TAE 50-40-00
1SBC5 8641 3F0303
1
2
R5
R6
R3
R4
7
8
E0300D
TAL 9 ... TAE 75 4-pole Contactors
d.c. Operated with Large Coil Voltage Range
Ordering Details
IEC UL/CSA Aux. contacts Type Order code Weight
fitted kg
AC-1 General
Rated use
current rating
θ < 40 °C600V state coil voltage state coil voltage code Packing
AA (see table below) (see table below) 1 piece
4 N.O. Main Poles
25 21 TAL 9-40-00 1SBL 143 261 R 00 0.520
30 30 TAL 16-40-00 1SBL 183 261 R 00 0.520
45 40 TAL 26-40-00 1SBL 243 261 R 00 0.750
70 80 TAE 45-40-00 1SBL 339 261 R 00 1.430
100 80 TAE 50-40-00 1SBL 359 261 R 00 1.430
125 105 TAE 75-40-00 1SBL 419 261 R 00 1.430
2 N.O. + 2 N.C. Main Poles
25 21 TAL 9-22-00 1SBL 143 561 R 00 0.520
30 30 TAL 16-22-00 1SBL 183 561 R 00 0.520
45 40 TAL 26-22-00 1SBL 243 561 R 00 0.750
Note: The polarity on the coil terminals (A1+ and A2-) must be respected for TAL... contactors.
A1
A2
Coil voltages and codes: TAL... and TAE...
Voltage Code
V - d.c.
17 ... 32 5 1
25 ... 45 5 2
36 ... 65 5 4
42 ... 78 5 8
50 ... 90 5 5
77 ... 143 6 2
90 ... 150 6 6
152 ... 264 6 8
Other voltages: please consult us.
Voltage tolerances (-15 % and +10 %) included in the
Uc min. and Uc max. values.
Remark for 4-pole contactors fitted with 2 N.O. + 2 N.C. main poles
These contactors are suitable for controlling 2 separate circuits, i.e. 2 loads with
2 separate supplies, or 1 circuit comprising 2 separate loads with a single supply
(see diagrams below). When the contactor operates there is no mechanical
overlapping between the N.O. poles and the N.C. poles: BREAK before MAKE.
These contactors are not suitable for a reversing starter or star-delta starter
or for controlling a single load from 2 separate supplies.
Block diagrams
Single supply and 2 separate loads 2 separate supplies and 2 separate loads
>> Accessory Fitting Details .................................. page 2/29 >> General - Approvals ............................................. section 7
>> Accessory Ordering Details ................................ section 4 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/64 >> Dimensions ........................................................... section 9
A1
A2
1
2
R5
R6
R3
R4
7
8
Load
Load
Back-up
supply
Main
supply
E0501DG
A1
A2
1
2
R5
R6
R3
R4
7
8
Load
Load
Supply
E0502DG
!
!
2
Low Voltage Products 2/29
1SBC100122C0202
4-pole Contactors
4-pole Contactors
TAL 9 ... TAE 75 4-pole Contactors
Main Accessories
Accessory Fitting Details for TAL 9 ... TAL 26 Contactors
Many configurations of accessories are possible depending on whether these are front mounted or side mounted.
Contactor configuration Front mounted accessories Side mounted accessories (8)
Main Available
poles auxiliary
contacts
Contactor Auxiliary contact Auxiliary contact Auxiliary contact Auxiliary contact Interlock unit
types 1-pole CA 5-.. 4-pole CA 5-.. 1-pole CE 5-.. 2-pole CAL 5-11 VM 5-.. or VE 5-..
TAL 9, TAL 16 4 0 0 0 1 to 4 x CA 5-..(1) or 1 x CA 5-.. (4-pole) (1) or 1 to 2 x CE 5-.. (2) or 1 x CAL 5-11 +1 x VM 5-1(3) or VE 5-1(3)(4)
TAL 9, TAL 16 2 2 0 0 1 to 4 x CA 5-..(5) or 1 x CA 5-.. (4-pole) (5) or 1 x CAL 5-11
TAL 26 4 0 0 0 1 to 4 x CA 5-..(6) or 1 x CA 5-.. (4-pole) (6) or 1 to 2 x CE 5-.. or 1 x CAL 5-11 +1 x VM 5-1 or VE 5-1
TAL 26 2 2 0 0 1 to 4 x CA 5-..(7) or 1 x CA 5-.. (4-pole) (7) or 1 x CAL 5-11
(1) 2 N.C. auxiliary contacts maximum in all mounting positions except 5. In position 5 no N.C. auxiliary contact allowed.
(2) CE 5-.. auxiliary contact not allowed in position 5.
(3) When VM5-1 or VE5-1 interlock unit is used, CAL 5-11 auxiliary contact is not permitted in any position.
(4) With VE5-1 interlock unit, a maximum of 3 N.O. auxiliary contacts are permitted.
(5) 2 N.C. auxiliary contacts maximum.
(6) 2 N.C. auxiliary contacts maximum in mounting position 5.
(7) N.C. auxiliary contacts are not allowed.
(8) Mounting position 1+30° not allowed.
Accessory Fitting Details for TAE 45 ... TAE 75 Contactors
Many configurations of accessories are possible depending on whether these are front mounted or side mounted.
Contactor configuration Front mounted accessories Side mounted accessories
Main Available
poles auxiliary
contacts Auxiliary contact
Contactor 1-pole CA 5-.. Auxiliary contact Pneumatic Timer Auxiliary contact Interlock unit
types (or 1-pole CE 5-..) 4-pole CA 5-.. TP .. A 2-pole CAL 5-11 VE 5-2
TAE 45 ... TAE 75
40 00 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 x CAL 5-11 or 1 x VE 5-2
(1 to 5 x CE 5-.. max.) (1) + 2 x 1-pole CA 5-.. or CE 5-.. (1)
+ 2 x 1-pole CA 5-..
(1) The total number of N.O. or N.C. CE 5-.. and other additional N.C. CA 5-.. auxiliary contacts is limited to 5.
>> Mounting Positions: see "Technical Data" .............................................. page 2/72 >> Accessory Ordering Details ....................................................................... section 4
2/30 Low Voltage Products
1SBC100122C0202
EK 175-40
1SBC5 7341 2F0301
EK 370-40
1SBC5 7343 2F0301
EK 1000-40
1SFT98099-069
EK 110 ... EK 1000 4-pole Contactors
d.c. Operated
Ordering Details
IEC UL/CSA Auxiliary contacts Type Order code Weight
fitted kg
AC-1 General
Rated use
current rating
θ < 40 °C600 V state coil voltage state coil voltage code Packing
AA (see table below) (see table below) 1 piece
200 170 2 1 EK 110-40-21 SK 824 440-D 4.350
250 200 2 1 EK 150-40-21 SK 824 441-D 4.400
300 250 2 1 EK 175-40-21 SK 825 440-D 6.650
350 300 2 1 EK 210-40-21 SK 825 441-D 6.650
550 420 2 1 EK 370-40-21 SK 827 040-D 17.20
800 540 2 1 EK 550-40-21 SK 827 041-D 17.20
1000 2 1 EK 1000-40-21 SK 827 044-D 17.50
Coil voltages and codes
Voltage Code
V d.c.
12 (1) DA
24 DB
36 DC
48 DD
60 D T
75 DG
110 DE
125 DU
220 D F
(1) Not for EK 370 ... EK 1000 contactors.
>> Accessory Fitting Details .................................. page 2/25 >> General - Approvals ............................................. section 7
>> Accessory Ordering Details ................................ section 4 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/76 >> Dimensions ........................................................... section 9
2
Low Voltage Products 2/31
1SBC100122C0202
AF 75-40-00
1SBC5 8270 3F0301
1
2
R5
R6
R3
R4
7
8
E0300D
Ordering Details
IEC UL/CSA Auxiliary contacts Type Order code Weight
fitted kg
AC-1 General
Rated use
current rating
θ < 40 °C600 V state coil voltage state coil voltage code Packing
AA (see table below) (see table below) 1 piece
4 N.O. main poles
70 80 AF 45-40-00 1SBL 337 201 R 00 1.420
100 80 AF 50-40-00 1SBL 357 201 R 00 1.420
125 105 AF 75-40-00 1SBL 417 201 R 00 1.420
2 N.O. + 2 N.C. main poles
70 80 AF 45-22-00 1SBL 337 501 R 00 1.420
125 105 AF 75-22-00 1SBL 417 501 R 00 1.420
Coil voltages and codes
Voltage Voltage Code
V - 50/60Hz V d.c.
–20 ... 60 7 2 (1)
48 ... 130 48 ... 130 6 9
100 ... 250 100 ... 250 7 0
(1) The connection polarities indicated close to the coil terminals
must be respected: A1 for the positive pole and A2 for the
negative pole.
Remark for AF 45 ... AF 75 4-pole contactors built with 2 N.O. + 2 N.C. main poles
These contactors are suitable for controlling 2 separate circuits, i.e. 2 loads with 2 separate supplies, or 1 circuit
comprising 2 separate loads with a single supply (see diagrams below). When the contactor operates there is
no mechanical overlapping between the N.O. poles and the N.C. poles: BREAK before MAKE.
These contactors are not suitable for a reversing starter or star-delta starter or for controlling a single
load from 2 separate supplies.
Block Diagrams
Single supply and 2 separate loads 2 separate supplies and 2 separate loads
Electromagnetic compatibility
AF... contactors comply with IEC 60947-1, 60947-4-1 and EN 60947-1, 60947-4-1.
Notice: This product has been designed for environment A. Use of this product in environment B may cause unwanted electromagnetic
disturbances in which case the user may be required to take adequate mitigation measures.
Definitions:
Environment A: "Mainly relates to low-voltage non public or industrial networks/locations/installations (see EN 50082-2 article 4) including highly
disturbing sources".
Environment B: "Mainly relates to low-voltage public networks (see EN 50082-1 article 5) such as residential, commercial and light industrial
locations/installations. Highly disturbing sources such as arc welders are not covered by this environment".
AF 45 ... AF 75 4-pole Contactors
Electronic Coil Interface
a.c. / d.c. Operated - Wide Voltage Range
>> Accessory Fitting Details .................................. page 2/23 >> General - Approvals ............................................. section 7
>> Accessory Ordering Details ................................ section 4 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/64 >> Dimensions ........................................................... section 9
4-pole Contactors
4-pole Contactors
!
A1
A2
1
2
R5
R6
R3
R4
7
8
Load
Load
Supply
E0502DG
A1
A2
1
2
R5
R6
R3
R4
7
8
Load
Load
Back-up
supply
Main
supply
E0501DG
2/32 Low Voltage Products
1SBC100122C0202
E1178D
E1179D
Contactors for Capacitor Switching
AC-6b Utilization Category according to IEC 60947-4-1
Capacitor Transient Conditions
In Low Voltage industrial installations, capacitors are mainly used for reactive energy correction (raising the power factor). When these capacitors
are energized, overcurrents of high amplitude and high frequencies (3 to 15 kHz) occur during the transient period (1 to 2 ms).
The amplitude of these current peaks, also known as "inrush current peaks", depends on the following factors:
The network inductances.
The transformer power and short-circuit voltage.
The type of power factor correction.
There are 2 types of power factor correction: fixed or automatic.
Fixed power factor correction consists of inserting, in parallel on
the network, a capacitor bank whose total pow er is provided by the
assembly of capacitors of identical or different ratings.
The bank is energized by a contactor that simultaneously supplies
all the capacitors (a single step).
The inrush current peak, in the case of fixed correction, can reach
30 times the nominal current of the capacitor bank.
Single-step capacitor bank scheme
Use the A/AF... contactor ranges.
An automatic power factor correction system, on the other hand,
consists of several capacitor banks of identical or different ratings
(several steps), energiz ed separately according to the value of the
power factor to be corrected.
An electronic device automatically determines the power of the steps
to be energized and activates the relevant contactors.
The inrush current peak, in the case of automatic correction, de-
pends on the power of the steps already on duty, and can reach
100 times the nominal current of the step to be energized.
Multi-step capacitor bank scheme
Use the UA... or UA..RA contactor ranges.
Steady State Condition Data
The presence of harmonics and the network's voltage tolerance lead to a current, estimated to be 1.3 times the nominal current In of the capacitor,
permanently circulating in the circuit.
Taking into account the manufacturing tolerances, the exact power of a capacitor can reach 1.15 times its nominal power.
Standard IEC 60831-1 Edition 2002 specifies that the capacitor must therefore have a maximum thermal current IT of:
IT = 1.3 x 1.15 x In = 1.5 x In
Consequences for the Contactors
To avoid malfunctions (welding of main poles, abnormal temperature rise, etc.), contactors f or capacitor bank switching m ust be sized to withstand:
A permanent current that can reach 1.5 times the nominal current of the capacitor bank.
The short but high peak current on pole closing (maximum permissible peak current Î ).
Contactor Selection Tool for Capacitor Switching
In a given application, if the user does not know the value of the inrush current peak,
this value can be approximately calculated using the formulas given on the Application
Guide "Contactors for Capacitor Switching".
Alternatively by the CAPCAL Selection Tool, available on the ABB Website:
www.abb.com/lowvoltage
right menu: "Support"
search: "Online Product Selection Tools"
select: "Contactors: AC-6b Capacitor Switching"
This program allows the calculation of these peaks and gives the references of the ABB
contactors according to the installation specifications. This calculation is valid for one
or several capacitor banks.
2
Low Voltage Products 2/33
1SBC100122C0202
Specific Contactors
Specific Contactors
1SBC5 8078 3F0303
1SBC5 8010 5F0303
1SBC5 8075 3F0301
1SBC5 7324 2F0301
1SBC5 8777 4F0301
1SBC5 8779 4F0301
1SBC5 8776 4F0301
1SFC1 0103 4F0201
1SBC5 9169 4F0303
1SBC5 9144 4F0302
1SBC5 8009 3F0303
1SBC5 9169 4F0303
ABB offers 3 contactor versions according to the value of the inrush current peak and the power of the capacitor bank.
UA..RA Contactors for Capacitor Switching (UA 16..RA to UA 110..RA) with insertion of damping resistors.
The insertion of damping resistors protects the contactor and the capacitor from the highest inrush currents.
UA... Contactors for Capacitor Switching (UA 16 to UA 110)
Maximum permissible peak current Î < 100 times the nominal rms current of the switched capacitor.
A... and AF... Standard Contactors (A 12 to A 300 and AF 50 to AF 750)
Maximum permissible peak current Î < 30 times the nominal rms current of the switched capacitor.
Contactors for Capacitor Switching
The ABB Solutions
2/34 Low Voltage Products
1SBC100122C0202
A1
A2
PA
R
PP
R
E2376D
C
UA..RA 3-pole Contactors for Capacitor Switching
Unlimited Peak Current Î
Application
The UA..RA contactors can be used in installations in which the peak current far exceeds 100 times nominal rms current. The contactors are delivered
complete with their damping resistors and must be used without additional inductances (see table below).
The capacitors must be discharged (maximum residual voltage at terminals 50 V) before being re-energized when the contactors are making.
Their electrical durability is 250 000 operating cycles for Ue < 500 V and 100 000 operating cycles for 500 V < Ue < 690 V.
Description
The UA..RA contactors are fitted with a special front mounted block, which ensures the serial insertion of 3 damping resistors into the circuit to limit
the current peak on energization of the capacitor bank. Their connection also ensures capacitor precharging in order to limit the second current peak
occurring upon making of the main poles.
Operating principle
The front-mounted block mechanism of the UA..RA contactors ensures:
early making of the auxiliary "PA" poles with respect to the main "PP" poles
automatic return to the open position of the auxiliary "PA" poles after the main poles are closed.
When the coil is energized, the early making auxiliary poles connect the capacitor to the network via the set of 3 resistors. The damping resistors
attenuate the first current peak and the second inrush current when the main contacts begin to make. Once the main poles are in the closed position,
the auxiliary poles automatically break.
When the coil is de-energized, the main poles break ensuring the breaking of the capacitor bank.
The contactor can then begin a new cycle.
The insertion of resistors allows to damp the highest current peak of the capacitor when switching on, whatever its level.
Selection Table according to IEC
Type Power in kvar – 50/60 Hz (AC-6b) Max. permissible gG type
230/240 V 400/415 V 440 V 500/550 V 690 V peak current fuses
40°C55°C70°C40°C55°C70°C40°C55°C70°C40°C55°C70°C40°C55°C70°CÎA max (*)
UA 16-30-10 RA 8 7.5 6 12.5 12.5 10 15 13 11 18 16 12.5 22 21 17 80
UA 26-30-10 RA 12.5 11.5 9 22 20 15.5 24 20 17 30 25 20 35 31 26 125
UA 30-30-10 RA 16 16 11 30 27.5 19.5 32 30 20.5 34 34 25 45 45 32 200
UA 50-30-00 RA 25 24 20 40 40 35 50 43 37 55 50 46 72 65 60 Unlimited 200
UA 63-30-00 RA 30 27 23 50 45 39 55 48 42.5 65 60 50 80 75 65 200
UA 75-30-00 RA 35 30 25 60 50 41 65 53 45 75 65 55 100 80 70 200
UA 95-30-00 RA 40 35 30 70 60 53 75 65 58 85 75 70 120 105 85 250
UA 110-30-00 RA 45 40 35 80 70 60 85 75 70 95 82 78 130 110 100 250
(*) The fuse ratings given in the column represent the maximum ratings ensuring type 1 coordination according to the definition of standard IEC 60947-4-1.
Selection Table according to UL/CSA
Type Power in kvar – 60 Hz Max permissible
240 V 480 V 600 V peak current
40 °C 40 °C 40 °C Î
UA 16-30-10 RA 8 16 20
UA 26-30-10 RA 11 22 27
UA 30-30-10 RA 14 28 35 Unlimited
UA 50-30-00 RA 25 50 62
UA 63-30-00 RA 27.5 55 70
UA 75-30-00 RA 32 64 80
Coil voltage
Uc
Aux. poles
PA
Main poles
PP
Total
making time
E2377D
2
Low Voltage Products 2/35
1SBC100122C0202
Specific Contactors
Specific Contactors
1SBC5 8779 4F0301
UA 16-30-10 RA
1SBC5 8777 4F0301
UA 75-30-00 RA
1SBC5 8776 4F0301
UA 110-30-00 RA
1SBC5 9144 4F0302
UA 30-30-10 RA
Ordering Details
IEC UL/CSA Auxiliary Type Order code Weight
Rated Rated contacts kg
power power fitted
400 V 480 V
40 °C 40 °Cstate coil voltage state coil voltage code Packing
kvar kvar (see table below) (see table below) 1 piece
12.5 16 1 UA 16-30-10 RA 1SBL 181 024 R 10 0.460
22 22 1 UA 26-30-10 RA 1SBL 241 024 R 10 0.710
30 28 1 UA 30-30-10 RA 1SBL 281 024 R 10 0.810
40 50 UA 50-30-00 RA 1SBL 351 024 R 00 1.350
50 55 UA 63-30-00 RA 1SBL 371 024 R 00 1.350
60 64 UA 75-30-00 RA 1SBL 411 024 R 00 1.350
70 UA 95-30-00 RA 1SFL 431 024 R 00 2.000
80 UA 110-30-00 RA 1SFL 451 024 R 00 2.000
Coil voltages and codes
Voltage Voltage Code
V - 50Hz V - 60Hz
24 24 8 1
48 48 8 3
110 110 ... 120 8 4
220 ... 230 230 ... 240 8 0
230 ... 240 240 ... 260 8 8
380 ... 400 400 ... 415 8 5
400 ... 415 415 ... 440 8 6
Other voltages: page 0/1.
UA..RA 3-pole Contactors for Capacitor Switching
Unlimited Peak Current Î
>> Accessory Fitting Details .................................. page 2/36 >> General - Approvals ............................................. section 7
>> Accessory Ordering Details ................................ section 4 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/37 >> Dimensions ........................................................... section 9
2/36 Low Voltage Products
1SBC100122C0202
UA..RA 3-pole Contactors for Capacitor Switching
Unlimited Peak Current Î
Accessory Fitting Details
Contactor configuration Front mounted accessories Side mounted accessories
Main Available
poles auxiliary
contacts
Contactor Auxiliary contact Auxiliary contact
types 1-pole CA 5-... 2-pole CAL...
UA 16-30-10 RA 3 0 1 0 –1 x CAL 5-11
UA 26-30-10 RA 3 0 1 0 –1 to 2 x CAL 5-11
UA 30-30-10 RA 3 0 1 0 1 x CA5-... +1 to 2 x CAL 5-11
UA 50-30-00 RA 3 0 0 0
UA 63-30-00 RA 3 0 0 0 1 to 2 x CA5-... +1 to 2 x CAL 5-11
UA 75-30-00 RA 3 0 0 0
UA 95-30-00 RA 3 0 0 0 1 to 2 x CA5-... +1 to 2 x CAL 18-11
UA 110-30-00 RA 3 0 0 0
>> Accessory Ordering Details and Characteristics ................................................................................................................................................................................................... section 4
2
Low Voltage Products 2/37
1SBC100122C0202
Specific Contactors
Specific Contactors
L
l
L
l
L
l
}
UA..RA 3-pole Contactors for Capacitor Switching
Unlimited Peak Current Î
Technical Data
Types UA 16..RA UA 26..RA UA 30..RA UA 50..RA UA 95..RA
UA 63..RA UA 110..RA
UA 75..RA
Short-circuit protection
gG type fuses sized 1.5 ... 1.8 In of the capacitor
Max. electrical switching frequency
Operating cycles/h 240
Electrical durability AC-6b
– operating cycles at Ue < 440 V 250 000
operating cycles at 500 V < Ue < 690 V 100 000
Connecting capacity (min. ... max.)
Main conductors (poles)
Rigid: solid ( 4 mm2)1 x mm21 ... 4 1.5 ... 6 2.5 ... 16 6 ... 50 10 ... 95
stranded ( 6 mm2)2 x mm2––2.5 ... 16 + 2.5 ... 6 6 ... 25 + 6 ... 16 6 ... 35
Flexible with cable end 1 x mm20.75 ... 2.5 1.5 ... 4 2.5 ... 10 6 ... 35 10 ... 70
2 x mm2––2.5 ... 10 + 2.5 ... 4 6 ... 16 + 6 ... 10 6 ... 35
Lugs L mm <7.7 10
l mm > 3.7 4.2
Auxiliary conductors
(built-in auxiliary terminals + coil terminals)
Rigid solid 1 x mm21 ... 4 0.75 ... 2.5
2 x mm21 ... 4 0.75 ... 2.5
Flexible with cable end 1 x mm20.75 ... 2.5 1 ... 2.5 0.75 ... 2.5
2 x mm20.75 ... 2.5
Lugs
Built-in aux. terminals L mm <7.7 10 8
l mm > 3.7 4.2 3.7
Coil terminals L mm <8
l mm > 3.7
Degree of protection acc. to IEC 60947-1 / Protection against direct contact in acc. with EN 50274
EN 60947-1 and IEC 60529 / EN 60529
– Main terminals IP 20 IP 10
– Coil terminals IP 20
– Built-in auxiliary terminals IP 20
Other technical characteristics are the same as those of standard A... contactors.
>> Rated Power in kvar and Selection Table ................................................ page 2/34 >> Technical Data of Standard A... Contactors ............................................ page 2/64
2/38 Low Voltage Products
1SBC100122C0202
UA... 3-pole Contactors for Capacitor Switching
Peak Current Î < 100 Times the rms Current
Application
The UA... contactors can be used for the switching of capacitor banks whose inrush current peaks are less than or equal to 100 times nominal rms
current. The table below gives the permissible powers according to operational voltage and temperature close to the contactor. It also specifies the
maximum peak current Î values accepted by the contactor.
The capacitors must be discharged (maximum residual voltage at terminals < 50 V) before being re-energized when the contactors are making.
In these conditions, electrical durability of contactors is equal to 100 000 operating cycles.
Description
See general design for A... standard contactors.
Selection Table according to IEC
Type Power in kvar 50/60 Hz (AC-6b)
Max. permissible peak
current Î (kA)
230/240 V 400/415 V 440 V 500/550 V 690 V UeUe
40°C55°C70°C40°C55°C70°C40°C55°C70°C40°C55°C70°C40°C55°C70°C< 500 V > 500 V
UA 16 7.5 6.7 6 12.5 11.7 10 13.7 13 11 15.5 14.7 12.5 21.5 20 17 1.8 1.6
UA 26 12 11 8.5 20 18.5 14.5 22 20 16 22 22 19.5 30 30 25 32.7
UA 30 16 16 11 27.5 27.5 19 30 30 20 34 34 23.5 45 45 32 3.5 3.1
UA 50 20 20 19 33 33 32 36 36 35 40 40 40 55 55 52 54.5
UA 63 25 25 21 45 43 37 50 48 41 50 50 45 70 70 60 6.5 5.8
UA 75 30 30 22 50 50 39 55 53 43 62 62 47.5 75 75 65 7.5 6.75
UA 95 35 35 30 65 65 55 65 65 55 70 70 60 80 80 70 9.3 8
UA 110 40 40 35 75 70 65 75 75 70 80 80 75 90 90 85 10.5 9
For 220 V and 380 V, multiply by 0.9 the rated values at 230 V and 400 V respectively.
Example: 50 kvar/400 V corresponding to 0.9 x 50 = 45 kvar/380 V.
The capacitor bank will be protected by gG type fuses whose rating is equal to 1.5 ... 1.8 times nominal current.
Selection Table according to UL/CSA
Type Power in kvar - 60 Hz
240 V 480 V 600 V
40 °C 40 °C40°C
UA 26 12.5 25 30
UA 30 16 32 40
UA 50 20 40 50
UA 75 27.5 55 70
UA 95 35 70 75
UA 110 40 80 85
If, in an application, the current peak is greater than the maximum peak current Î specified in the tables above, select a higher rating, refer to the
UA..RA contactors, or add inductances. (see Application Guide "Contactors for Capacitor Switching").
>> General Design of Standard A... Contactors ............................................. page 2/6 >> UA..RA Contactors ..................................................................................... page 2/34
2
Low Voltage Products 2/39
1SBC100122C0202
Specific Contactors
Specific Contactors
UA 30-30-10
UA 50-30-00
1SBC5 8009 3F0303
1SBC5 8078 3F0303
1SBC5 8010 5F0303
UA 110-30-00
UA 16-30-10
1SBC5 9169 4F0304
UA... 3-pole Contactors for Capacitor Switching
Peak Current Î < 100 Times the rms Current
Ordering Details
IEC UL/CSA Auxiliary Type Order code Weight
Rated Max. Rated
contacts kg
power peak power
fitted
400 V current 480 V
40 °CÎ40 °Cstate coil voltage state coil voltage code Packing
kvar kA kvar (see table below) (see table below) 1 piece
12.5 1.8 1 UA 16-30-10 1SBL 181 022 R 10 0.340
20 3 25 1 UA 26-30-10 1SBL 241 022 R 10 0.600
27.5 3.5 32 1 UA 30-30-10 1SBL 281 022 R 10 0.710
33 5 40 –– UA 50-30-00 1SBL 351 022 R 00 1.160
11 UA 50-30-11 1SBL 351 022 R 11 1.200
45 6.5 –– UA 63-30-00 1SBL 371 022 R 00 1.160
11 UA 63-30-11 1SBL 371 022 R 11 1.200
50 7.5 55 –– UA 75-30-00 1SBL 411 022 R 00 1.160
11 UA 75-30-11 1SBL 411 022 R 11 1.200
65 9.3 70 –– UA 95-30-00 1SFL 431 022 R 00 2.000
11 UA 95-30-11 1SFL 431 022 R 11 2.040
75 10.5 80 –– UA 110-30-00 1SFL 451 022 R 00 2.000
11 UA 110-30-11 1SFL 451 022 R 11 2.040
Coil voltages and codes
Voltage Voltage Code
V - 50Hz V - 60Hz
24 24 8 1
48 48 8 3
110 110 ... 120 8 4
220 ... 230 230 ... 240 8 0
230 ... 240 240 ... 260 8 8
380 ... 400 400 ... 415 8 5
400 ... 415 415 ... 440 8 6
Other voltages: page 0/1.
>> Accessory Fitting Details .................................. page 2/40 >> General - Approvals ............................................. section 7
>> Accessory Ordering Details ................................ section 4 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/41 >> Dimensions ........................................................... section 9
2/40 Low Voltage Products
1SBC100122C0202
UA... 3-pole Contactors for Capacitor Switching
Peak Current Î < 100 Times the rms Current
>> Accessory Ordering Details and Characteristics ................................................................................................................................................................................................... section 4
Accessory Fitting Details
Contactor configuration Front mounted accessories Side mounted accessories
Main Available
poles auxiliary
contacts
Contactor Auxiliary contact Auxiliary contact Pneumatic Timer Auxiliary contact
types 1-pole CA 5-.. 4-pole CA 5-.. TP .. A 2-pole CAL...
UA 16-30-10 3 0 1 0 1 to 4 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 to 2 x CAL 5-11
UA 26-30-10 3 0 1 0 1 to 4 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 to 2 x CAL 5-11
UA 30-30-10 3 0 1 0 1 to 5 x CA 5-.. or 1 x CA 5-.. (4-pole) or 1 x TP .. A +1 to 2 x CAL 5-11
+ 1 x 1-pole CA 5-.. + 1 x CA 5-.. (1-pole)
UA 50-30-00 3 0 0 0 1 x CA 5-.. (4-pole) 1 x TP .. A
UA 63-30-00 3 0 0 0 1 to 6 x CA 5-.. or + 2 x 1-pole CA 5-.. or + 2 x CA 5-.. (1-pole) +1 to 2 x CAL 5-11
UA 75-30-00 3 0 0 0
UA 95-30-00 3 0 0 0 1 to 6 x CA 5-.. or 1 x CA 5-.. (4-pole) +1 to 2 x CAL 18-11
UA 110-30-00 3 0 0 0 + 2 x 1-pole CA 5-..
2
Low Voltage Products 2/41
1SBC100122C0202
Specific Contactors
Specific Contactors
L
l
L
l
L
l
}
Technical Data
Types UA 16 UA 26 UA 30 UA 50 UA 95
UA 63 UA 110
UA 75
Short-circuit protection
gG type fuses sized 1.5 ... 1.8 In of the capacitor
Max. electrical switching frequency
Operating cycles/h 240
Electrical durability AC-6b
operating cycles at Ue < 690 V 100 000
Connecting capacity (min. ... max.)
Main conductors (poles)
Rigid: solid ( 4 mm2)1 x mm21 ... 4 1.5 ... 6 2.5 ... 16 6 ... 50 10 ... 95
stranded ( 6 mm2)2 x mm21 ... 4 1.5 ... 6 2.5 ... 16 6 ... 25 6 ... 35
Flexible with cable end 1 x mm20.75 ... 2.5 0.75 ... 4 2.5 ... 10 6 ... 35 10 ... 70
2 x mm20.75 ... 2.5 0.75 ... 4 2.5 ... 10 6 ... 16 6 ... 35
Lugs L mm <7.7 10
l mm > 3.7 4.2
Auxiliary conductors
(built-in auxiliary terminals + coil terminals)
Rigid solid 1 x mm21 ... 4 0.75 ... 2.5
2 x mm21 ... 4 0.75 ... 2.5
Flexible with cable end 1 x mm20.75 ... 2.5 1 ... 2.5 0.75 ... 2.5
2 x mm20.75 ... 2.5
Lugs
Built-in aux. terminals L mm <7.7 10 8
l mm > 3.7 4.2 3.7
Coil terminals L mm <8
l mm > 3.7
Degree of protection acc. to IEC 60947-1 / Protection against direct contact in acc. with EN 50274
EN 60947-1 and IEC 60529 / EN 60529
– Main terminals IP 20 IP 10
– Coil terminals IP 20
– Built-in auxiliary terminals IP 20
Other technical characteristics are the same as those of standard A... contactors.
UA... 3-pole Contactors for Capacitor Switching
Peak Current Î < 100 Times the rms Current
>> Rated Power in kvar and Selection Table ................................................ page 2/38 >> Technical Data of Standard A... Contactors ............................................ page 2/64
2/42 Low Voltage Products
1SBC100122C0202
A... and AF... Standard 3-pole Contactors
for Capacitor Switching
Single Step - Peak Current Î < 30 Times the rms Current
Application
The A... and AF... contactors are suited for capacitor bank switching for the peak current and power values in the table below.
The capacitors must be discharged (maximum residual voltage at terminals < 50 V) before being re-energized when the contactors are making.
In these conditions, electrical durability of contactors is equal to 100 000 operating cycles.
Description
See "General Design" for A... and AF... contactors
Selection Table according to IEC
Type Power in kvar 50/60 Hz (AC-6b) Max. peak current
230/240 V 400/415 V 440 V 500/550V 690 V
40°C55°C70°C40°C55°C70°C40°C55°C70°C40°C55°C70°C40°C55°C70°CÎ (kA)
A 9 –– –– –––– ––
A 12 7 76 11 11 9.5 12 12 10.5 14 14 12 19 19 16.5 0.7
A 16 7.5 7.5 6 12.5 12.5 10 14 14 10.5 15.5 15.5 12 21.5 21.5 16.5 1
A 26 11.5 11.5 9 19 19 15 20 20 16.5 23 23 19 32 32 26 1.6
A 30 13 13 11 22 22 18.5 24 24 20.5 28 28 23 38 38 32 1.9
A 40 15 15 12 26 26 20 29 29 22 35 35 25 46 46 34.5 2.1
A/AF 50 22 22 20 38 38 34 42 42 37 48 48 42 65 65 58.5 2.3
A/AF 63 25 25 23 43 43 39 47 47 42.5 54 54 48.5 74 74 67 2.5
A/AF 75 28 28 24.5 48 48 41 52 52 45 60 60 51 82 82 70 2.6
A/AF 95 35 35 33 60 60 53 63 63 58 75 75 70 80 80 75 4
A/AF 110 40 40 35 70 70 60 75 75 65 83 83 78 90 90 85 4
A/AF 145 50 50 42 90 90 74 93 93 80 110 110 96 110 110 110 4
A/AF 185 60 60 45 110 110 83 115 115 85 135 135 102 135 135 135 5
A/AF 210 75 75 57 130 130 105 135 135 110 160 160 130 160 160 160 6.5
A/AF 260 85 85 70 145 145 135 155 155 140 180 180 165 200 200 200 8
A/AF 300 100 100 85 165 165 155 180 180 163 210 210 196 240 240 240 8
AF 400 120 120 105 210 210 195 220 220 200 260 260 241 300 300 300 10
AF 460 140 140 120 240 240 225 260 260 230 325 325 300 325 325 325 10
AF 580 170 170 160 285 285 275 300 300 290 350 350 340 440 440 440 12
AF 750 220 220 190 400 400 370 410 410 380 490 490 435 600 600 600 12
Note: For 3-pole A 16 ... A 110 contactors used with anti-resonance inductances (Several mH, built specially to suppress inrush current), see the Application Guide "Contactors for Capacitor
Switching".
If, in an application, the current peak is greater than the maximum peak current Î specified in the table above, select a higher rating, refer to the UA...
contactors, or add inductances, see the Application Guide "Contactors for Capacitor Switching".
The capacitor bank will be protected by gG type fuses whose rating is equal to 1.5 ... 1.8 times nominal current.
2
Low Voltage Products 2/43
1SBC100122C0202
Specific Contactors
Specific Contactors
A 50-30-00
A 95-30-00
1SBC5 8075 2F0301
1SBC5 7324 2F0301
1SFC1 0103 4F0201
AF 750-30-11
A 26-30-10
1SBC5 7309 4F0301
A... and AF... Standard 3-pole Contactors
for Capacitor Switching
Single Step - Peak Current Î < 30 Times the rms Current
Ordering Details
IEC Auxiliary Type Order code Weight
Power Max. peak contacts fitted kg
400 V current
40 °CÎstate coil voltage state coil voltage code Packing
kvar kA (see table below) (see table below) 1 piece
11 0.7 1 A 12-30-10 1SBL 161 001 R 10 0.340
12.5 1 1 A 16-30-10 1SBL 181 001 R 10 0.340
19 1.6 1 A 26-30-10 1SBL 241 001 R 10 0.600
22 1.9 1 A 30-30-10 1SBL 281 001 R 10 0.710
26 2.1 1 A 40-30-10 1SBL 321 001 R 10 0.710
38 2.3 A 50-30-00 1SBL 351 001 R 00 1.160
AF 50-30-00 1SBL 357 001 R 00 1.180
43 2.5 A 63-30-00 1SBL 371 001 R 00 1.160
AF 63-30-00 1SBL 377 001 R 00 1.180
48 2.6 A 75-30-00 1SBL 411 001 R 00 1.160
AF 75-30-00 1SBL 417 001 R 00 1.180
60 4 A 95-30-00 1SFL 431 001 R 00 2.000
AF 95-30-00 1SFL 437 001 R 00 2.030
70 4 A 110-30-00 1SFL 451 001 R 00 2.000
AF 110-30-00 1SFL 457 001 R 00 2.030
90 4 1 1 A 145-30-11 1SFL 471 001 R 11 3.500
AF 145-30-11 1SFL 477 001 R 11 3.600
110 5 1 1 A 185-30-11 1SFL 491 001 R 11 3.500
AF 185-30-11 1SFL 497 001 R 11 3.600
130 6.5 1 1 A 210-30-11 1SFL 511 001 R 11 6.100
AF 210-30-11 1SFL 517 001 R 11 6.200
145 8 1 1 A 260-30-11 1SFL 531 001 R 11 6.100
AF 260-30-11 1SFL 537 001 R 11 6.200
165 8 1 1 A 300-30-11 1SFL 551 001 R 11 6.100
AF 300-30-11 1SFL 557 001 R 11 6.200
210 10 1 1 AF 400-30-11 1SFL 577 001 R 11 12.00
240 10 1 1 AF 460-30-11 1SFL 597 001 R 11 12.00
285 12 1 1 AF 580-30-11 1SFL 617 001 R 11 15.00
400 12 1 1 AF 750-30-11 1SFL 637 001 R 11 15.00
Coil voltages and codes: A 12 ... A 300
Voltage Voltage Code
V - 50Hz V - 60Hz
24 24 8 1
48 48 8 3
110 110 ... 120 8 4
220 ... 230 230 ... 240 8 0
230 ... 240 240 ... 260 8 8
380 ... 400 400 ... 415 8 5
400 ... 415 415 ... 440 8 6
Other voltages: page 0/1.
>> Accessory Fitting Details ........................... page 2/8, 2/12 >> Accessory Ordering Details ................................ section 4
>> AF... Contactors with Electronic Coil Interface: electromagnetic compatibility ........................................................ pages 2/19, 2/21
Coil voltages and codes: AF 50 ... AF 300
Voltage Voltage Code
V - 50/60Hz V d.c.
–20 ... 60 7 2 (1)
48 ... 130 48 ... 130 6 9
100 ... 250 100 ... 250 7 0
(1) The connection polarities indicated close to the coil terminals must
be respected: A1 for the positive pole and A2 for the negative pole.
Coil voltages and codes: AF 400 ... AF 750
Voltage Voltage Code
V - 50/60Hz V d.c.
–24 ... 60 6 8 (1)
48 ... 130 48 ... 130 6 9
100 ... 250 100 ... 250 7 0
250 ... 500 250 ... 500 7 1
(1) The connection polarities indicated close to the coil terminals must
be respected: A1 for the positive pole and A2 for the negative pole.
2/44 Low Voltage Products
1SBC100122C0202
GA75-10
A1
A2
V
Hz
50
60
80
1 L1
-
2T1
6-
1-
2-
3-
4-
5-
6-
1-
2-
3-
4-
5-
E1672D
+
GAE75-10
A1
A2
V
Hz
50
60
80
1 L1
-
2T1
6-
1-
2-
3-
4-
5-
6-
1-
2-
3-
4-
5-
E1673D
+
GA 75, GAE 75 Contactors for d.c. Switching
Application
GA 75 and GAE 75 contactors are designed for d.c. circuit switching.
Arc suppression is more difficult in d.c. than in a.c. To choose a contactor, it is necessary to know the current and voltage to be broken as well as
the L/R time constant of the power circuit to be controlled.
For your information, here are some typical time constant values:
DC-1: non inductive loads such as resistance furnaces: ............ L/R ~ 1 ms,
DC-3: shunt motors: .................................................................... L/R ~ 2 ms,
DC-5: series motors: ................................................................... L/R ~ 7.5 ms.
Remark: the addition of a resistor in parallel with an inductive winding makes arc suppression easier.
Insulated main pole
connections (25 mm2)
Insertion contact block
wiring for d.c. operated coil
CAL 5-11 factory mounted
auxiliary contact block
(GA 75-10-11 type)
CAL 5-11 factory mounted
auxiliary contact block
(GAE 75-10-11 type)
Insulated main pole
connections (25 mm2)
Description
GA 75 and GAE 75 contactors are of the block type design.
Main poles
GA 75 and GAE 75 contactors are fitted with arc chutes with permanent
magnets specially designed for d.c. breaking.
The three contactor paths are arranged in series via two supplied and
fitted insulated connections (25 mm2).
The GA 75 and GAE 75 are "single-pole" devices for which the
connection polarities indicated next to the connection terminals must
be respected. Furthermore, they are marked 1L1 for the positive
terminal and 2T1 for the negative terminal.
Remark:
Main contacts cannot be changed.
Auxiliary contact: 1 CAL 5-11 side mounted add-on auxiliary contact
block (GA 75-10-11 and GAE 75-10-11 types).
Control circuit
GA 75 a.c. operated,
GAE 75 d.c. operated.
Accessories: a wide range of accessories is available.
GA 75 and GAE 75 contactors specific design (see A 9 ... A 110 contactors for general design)
GA 75-10-11 GAE 75-10-11
Specific Technical Data
Rated insulation voltage Ui = 1000 V d.c. according to
IEC 60947-4-1 and EN 60947-4-1.
Maximum switching frequencies: 300 operating cycles/h.
Maximum rated operational current Ie acc. to IEC
DC-1 θ < 55 °C220 V < Ue < 440 V 100 A
440 V < Ue < 600 V 75 A
DC-3 220 V < Ue < 4 40 V 85 A
DC-5 110 V < Ue < 220 V 85 A
220 V < Ue < 440 V 35 A
Maximum rated operational current Ie acc. to UL/CSA
General use Ue < 440 V 100 A
Ue < 600 V 75 A
Ue < 1000 V 35 A
Other technical data are the same as those of standard A... contactors.
2
Low Voltage Products 2/45
1SBC100122C0202
GA 75-10-11
1SBC5 8654 4F0301
GAE 75-10-11
1SBC5 8655 4F0301
GA 75, GAE 75 Contactors for d.c. Switching
Ordering Details
IEC Available Type Order code Weight
Rated operational current auxiliary kg
DC-1 DC-3 DC-5 contacts
440 V 440 V 220 V
θ < 55 °Cstate coil voltage state coil voltage code Packing
AAA (see table below) (see table below) 1 piece
100 85 85 –– GA 75-10-00 1SBL 411 025 R 00 1.220
11 GA 75-10-11 1SBL 411 025 R 11 1.260
100 85 85 –– GAE 75-10-00 1SBL 419 025 R 00 1.260
11 GAE 75-10-11 1SBL 419 025 R 11 1.300
Coil voltages and codes: GA 75
Voltage Voltage Code
V - 50Hz V - 60Hz
24 24 8 1
48 48 8 3
110 110 ... 120 8 4
220 ... 230 230 ... 240 8 0
230 ... 240 240 ... 260 8 8
380 ... 400 400 ... 415 8 5
400 ... 415 415 ... 440 8 6
Other voltages: page 0/1.
Coil voltages and codes: GAE 75
Voltage Code
V d.c.
12 8 0
24 8 1
42 8 2
48 8 3
50 2 1
60 8 4
75 8 5
110 8 6
125 8 7
220 8 8
240 8 9
250 3 8
Connection Diagrams
In d.c. circuits, the source to earth (or frame) connection mode is an important element.
Three modes are mainly used:
A – insulated source, i.e. unearthed (or not connected to the frame),
B – source earthed via its central point,
C – source earthed via one of its outer poles.
Modes A and B do not impose any constraints with regard to the distribution of the contactor poles between the
two source / load connecting branches. Mode C requirements are therefore suitable for modes A and B.
For mode C, all the poles necessary for breaking must be installed in series between the load and the
unearthed (also not connected to the frame) source polarity.
We recommend this solution for all connection modes.
The above provisions relate to power circuit switching, the SCPD (Short-Circuit Protection Device) must comply
with protection rules.
>> Contactor Selection for d.c. Circuit Switching ....................................................................................................................... page 2/60
>> Accessories .......................................................... section 4 >> Terminal Marking and Positioning ..................... section 8
>> General - Approvals ............................................. section 7 >> Dimensions ........................................................... section 9
Specific Contactors
Specific Contactors
GA 75 / GAE 75
SCPD
Short-Circuit
Protection Device
+
– 2T1
+ 1L1
Load
{
E0205DG
GA 75 / GAE 75
+
Load
{
– 2
T1
+ 1
L1
E0206DG
SCPD
Short-Circuit
Protection Device
2/46 Low Voltage Products
1SBC100122C0202
A2 23x
15x
1
2
i1 i2
BA
E0849D
+
-
+
AM... Magnetically Latched Contactors
d.c. Operated
Application
These contactors provide a safety function in those circuits where standard contactors would drop out in the
event of a faulty control circuit supply voltage, i.e. excessive voltage drops, control circuit voltage failures.
They also provide an energy saving function in those circuits where contactors are used for an uninterrupted
duty, i.e. distribution or current carrying duty.
This type of contactor is particularly suitable for industrial processes where voltage sags have heavy
consequences and is totally immune to voltage dips.
Description
The AM... magnetically latched contactors are very similar in construction and dimensions to the A... standard
contactors of equal rating. Only the electro-magnet and coil have a specific design in order to achieve the
latching and de-latching operations.
The operating coil is built with 3 connecting terminals and 2 windings which, when energized, create two
magnetic fields of opposite strength.
The coil windings must be energized from a d.c. supply, polarity (+ and -) must be observed.
Operation
Contactor closing i.e. latching via "B" circuit. The contactor is held in closed position due to the circuit
remanency.
Contactor opening, i.e. de-latching via "A" circuit.
On closing and opening the coil windings are automatically controlled and briefly energized through
"B" (N.C.) and "A" (N.O.) auxiliary contacts.
The AM... contactors have two resting positions, closed position and open position and are delivered in
closed position.
Changeover from one position to another is achieved by impulses on the coil with a minimum duration of
100 ms.
Coil operating limits: 0.85 ... 1.1 Uc
Technical Data
Same technical data as for the AE 50, AE 75 contactors with the exception of:
coil consumption: 210 W on latching, and 45 W on de-latching.
mounting positions: position 5 is prohibited (see "Technical Data" for mounting position diagram).
Operating coil diagram
>> A... Standard Contactor Description .................. page 2/6 >> General - Approvals ............................................. section 7
>> Accessories .......................................................... section 4 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/64 >> Dimensions ........................................................... section 9
2
Low Voltage Products 2/47
1SBC100122C0202
AM 45-22-22
1SBC5 8524 3F0304
AM 75-30-22
1SBC5 8523 3F0304
Ordering Details
Contactors with 3 N.O. main poles
IEC Available Type Order code Weight
Rated Rated
auxiliary
kg
power current
contacts
400 V θ < 40 °C
AC-3 AC-1 state coil voltage state coil voltage code Packing
kW A (see table below) (see table below) 1 piece
22 100 2 2 AM 50-30-22 1SBL 358 029 R 22 1.230
37 125 2 2 AM 75-30-22 1SBL 418 029 R 22 1.230
Contactors with 2 N.O. + 2 N.C. main poles
IEC Available Type Order code Weight
AC-1
auxiliary
kg
Rated current
contacts
θ < 40 °Cθ < 55 °Cstate coil voltage state coil voltage code Packing
AA (see table below) (see table below) 1 piece
70 60 2 2 AM 45-22-22 1SBL 338 529 R 22 1.440
125 105 2 2 AM 75-22-22 1SBL 418 529 R 22 1.440
Coil voltages and codes
Voltage Code
V d.c.
12 8 0
24 8 1
42 8 2
48 8 3
50 2 1
60 8 4
75 8 5
110 8 6
125 8 7
220 8 8
240 8 9
250 3 8
Accesssories
A wide range of accessories is available.
Note: Max. of 2 CA 5-.. 1-pole auxiliary contact blocks can be added on the AM... 3-pole contactors only.
AM... Magnetically Latched Contactors
d.c. Operated
Specific Contactors
Specific Contactors
>> A... Standard Contactor Description .................. page 2/6 >> General - Approvals ............................................. section 7
>> Accessories .......................................................... section 4 >> Terminal Marking and Positioning ..................... section 8
>> Technical Data .................................................... page 2/64 >> Dimensions ........................................................... section 9
2/48 Low Voltage Products
1SBC100122C0202
CAL16-11 C
61
62
53
54
21
22
13
14
CAL16-11 A
C
A
E
A
CE
A
EH 1200 3-pole Contactor
for non Inductive Loads
a.c. Operated or d.c. Operated
Application
The EH 1200 contactor is designed for non inductive or slightly inductive loads (Utilization category AC-1 according to IEC 60947-4-1 standard, or
General Use according to UL). Not suitable for motor applications.
Description
Main poles and auxiliary contact blocks:
– 3 main poles,
– side mounted add-on auxiliary contact blocks.
Control circuit:
The magnet system is d.c. operated with economizing resistor circuit, operated by an CCL 16-11 E auxiliary contact.
A rectifier system is used for the a.c. version, the control circuit connection is directly on the rectifier with push on terminals (6.3 mm).
Accessories:
CAL 16-11.. auxiliary contact blocks.
RC-EH 800/10 surge suppressor for d.c. operated. (Not needed for a.c. operated.)
Accessory Fitting Details
Mounting positions of Auxiliary contact types and connecting diagrams
the auxiliary
contacts
EH 1200... 3-pole contactors
Contactor Main Available Add-on auxiliary Mounting positions
types poles auxiliary contacts contact blocks
2-pole CAL 16-11... Factory mounted auxiliary contacts
Add-on CAL 16-11 auxiliary contacts
a.c. operated, 50/60 Hz / d.c. operated
EH 1200 3 0 1 1 1 x CAL 16-11 C
>> Accessory Ordering Details (see Accessories for EK Series Contactors) .......................................................................................................................................................... section 4
2
Low Voltage Products 2/49
1SBC100122C0202
EH 1200-30-11
1SBC5 9193 4F0302
Specific Contactors
Specific Contactors
EH 1200 3-pole Contactor
for non Inductive Loads
a.c. Operated or d.c. Operated
Ordering Details
IEC UL Available Type Order code Weight
auxiliary kg
AC-1 General contacts
Rated use
current rating
θ < 40 °C600 V state coil voltage state coil voltage code Packing
AA (see table below) (see table below) 1 piece
1200 1200 11 EH 1200-30-11 SK 828 006- 18.00
22 EH 1200-30-22 SK 828 032- 18.00
Coil voltages and codes: EH 1200
Voltage Voltage Code
V - 50/60 Hz V - d.c.
–24DB
110 DE
110 ... 120 E F
220 ... 240 E L
380 ... 400 E P
Technical Data
Main Pole - Utilization Characteristics
Rated insulation voltage UiV1000
Rated operational current Ie / AC-1
for air temperature close to contactor
θ 40 °CA1200
Ue max. 1000 V θ 55 °CA1000
θ 70 °CA850
with terminal bars mm 2 x 80 x 5
UL rating
General use 600 V A1200
Rated short-time withstand current I
cw
at 40 °C ambient temp., in free air,
from a cold state 1 s A8000
10 s A7200
30 s A5200
1 min A4000
15 min A1500
Electrical durability - AC-1, 1200 A
– max. 440 V operations 150 ... 200 000
– max. 690 V operations 70 ... 100 000
– max. 1000 V operations 10 ... 30 000
Mechanical durability million of 0.5 ... 1
operations
Magnet System Characteristics
Coil consumption
– pull-in a.c. VA 1000 ... 1400
– pull-in d.c. W1200
– holding a.c. VA/W 20 ... 25
– holding d.c. W21
Operating time
between coil energization and
– N.O. contact closing ms 60 ... 80
– N.C. contact opening ms 55 ... 75
between coil de-energization and
– N.O. contact opening ms 13 ... 38
– N.C. contact closing ms 10 ... 35
{
>>
Connecting Characteristics: see "Dimensions" ...
section 9 >> Terminal Marking ................................................. section 8
>> Accessories (See EK Contactors) ...................... section 4 >> Dimensions ........................................................... section 9
2/50 Low Voltage Products
1SBC100122C0202
Star-Delta Starting
of Three-Phase Asynchronous Motors
General
Star-delta starting is the most common method to reduce the starting current of a motor. This system can be used on all the squirrel cage motors,
which are normally used in delta connection.
In this type of starting, it is recommended to choose motors having high starting torque i.e. much higher than the resistive torque in order to reach
sufficient high speed when the motor is connected in star.
Star-delta starting
Technical Data
When starting:
– inrush current is reduced to a third of direct starting current,
– motor torque is reduced to a third or even less of direct starting torque.
Transient current is generated when switching from star to delta connection.
Utilization
During the initial starting phase ("star" connection), the resistive torque of
the driven load must remain, irrespective of speed, less than the "star"
motor torque until "star-delta" switching occurs.
This starting mode is therefore ideal for machines having low starting
torque such as:
– pumps,
– centrifugal compressors,
– wood-working machines, etc.
In order to prevent a high current peak, at least 85 % of nominal
speed must be reached before switching from star to delta.
Precautions
Motor nominal voltage in delta connection must be equal to that of the mains.
Example:
A motor for 400 V star-delta starting must be designed for 400 V in "delta"
connection. Its usual designation is "400 V / 690 V motor". The motor must
be constructed with 6 terminal windings.
Sequence
Starting is a three-stage process:
1st stage - "Star" connection
Press the "On" button on the control circuit to close the KM2 "star" contactor. The KM1 "line" contactor then closes and the motor starts. Countdown
of programmed starting time (normally 6 to 10 s) then begins.
2nd stage - "Star" to "Delta" switching
When the programmed starting time is over, the KM2 "star" contactor opens.
3rd stage - "Delta" connection
A transition time (or dwelling time) of 50 ms is fixed between opening of the "star" contactor and closing of the "delta" contactor by the use of TE5S
timer. This prevents short circuit between "star" and "delta".
Note: When AF... contactor types are used as delta and star contactors or an A... contactor as star contactor with an AF... contactor as delta contactor, the use of a timer including a dwelling time
(or transition time) e.g. TE5S is not recommended. A timer set for the starting duration in star connection is enough. An electrical interlock between star and delta is mandatory such as VE 5 or through
auxiliary contacts.
Furthermore, in open transition, the current interruption may reach up to 95 ms: it shall be checked that this duration is compatible with the application i.e. mainly if the decreasing in rotation speed
is acceptable during the starting phase.
I
/
InT
/
Tn
6
5
4
3
2
1
0
7
20 40 60 10080 Motor speed (%)
Tr (resistive torque)
T (motor)
T
(
m
o
t
o
r
)
I
(star)
E0899DG
I (delta)
I
= nominal torque
= nominal current= current;
= torque; Tn
T
In
2
Low Voltage Products 2/51
1SBC100122C0202
13 5
24 6
KM2 / (Y)
135
246
KM3 / ( )
135
246
KM1 / (L)
L1 L2 L3
W2
V2
U2
W1
V1
U1
W2
V2
U2
W1
V1
U1
135
246
E0514D1
Controlgear Selection Guide - For more technical information, refer to ABB Starting Combinations catalogue
Motor power, kW Max. starting Contactors O/L Relay Timer Set of power
Ambient temperature = 55 0Ctime from (1) connections
cold state (3)
220- 240 V 380- 415 V 500 V 660- KM1 KM3 KM2
230 V 400 V 690 V seconds Main Delta Star
447.5 7.5 5.5 5.5 15 A 9 A 9 A 9 TA 25 DU TE5S BED 16-1 (4)
5.5 5.5 11 11 7.5 7.5 15 A 12 A 12 A 9 TA 25 DU TE5S BED 16-1 (4)
9111515151115A 16 A 16 A 12 TA 25 DU TE5S BED 16-1 (4)
12.5 12.5 22 22 22 15 15 A 26 A 26 A 16 TA 25 DU TE5S BED 26-1 (4)
15 15 25 25 25 18.5 15 A 30 A 30 A 26 TA 25 DU TE5S BED 40-1 (4)
18.5 22 37 37 37 37 30 A 40 A 40 A 26 TA 42 DU TE5S BED 40-1 (4)
25 25 45 45 45 45 30 A 50 A 50 A 30 TA 75 DU TE5S BED 50-1 (4)
30 33 55 55 63 59 30 A 63 A 63 A 40 TA 75 DU TE5S BED 50-1 (4)
37 40 63 70 75 63 30 A 75 A 75 A 50 TA 75 DU TE5S BED 75-1 (4)
45 45 75 75 90 90 20 A 95 A 95 A 75 TA 110 DU TE5S BED 95 (5)
55 59 90 100 110 132 20 A 110 A 110 A 95 TA 110 DU TE5S BED 110 (5)
75 75 132 132 160 160 20 A 145 A 145 A 110 TA 200 DU TE5S BED 145 (5)
90 90 160 160 200 250 20 A 185 A 185 A 145 TA 200 DU TE5S BED 185 (5)
110 110 200 200 250 315 20 A 210 A 210 A 185 TA 450 DU TE5S BED 210 (5)
140 140 220 250 295 355 20 A 260 A 260 A 210 TA 450 DU TE5S BED 300 (5)
160 160 250 250 355 450 20 A 300 A 300 A 260 TA 450 DU TE5S BED 300 (5)
180 200 355 355 450 560 20 AF 400 AF 400 A 260 E 500 DU (2) BED 400 (5)
250 250 450 475 560 670 20 AF 460 AF 460 A 300 E 500 DU (2) BED 400 (5)
315 315 560 600 700 750 20 AF 580 AF 580 AF 400 E 800 DU (2) BED 580 (5)
400 400 670 670 750 900 20 AF 750 AF 750 AF 460 E 800 DU (2) BED 580 (5)
450 475 830 900 960 1350 20 AF 1350 AF 1350
AF 580
(6)
E 1250 DU (2)
560 600 1000 1050 1150 1600 20 AF 1650 AF 1650
AF 750
(6)
E 1250 DU (2)
For motors above 670 kW/400 V, it is recommended to use Closed Transition Star-Delta starting. Contact your ABB Office for selection.
(1) The setting current value is: nominal motor current x 0.58. (4) Version without space for mechanical interlock.
(2) Contactor Relay type N + TP timer can be used as the AF contactors have a slight delay in closing. (5) Version with space for mechanical interlock.
(3) Usual time value = 6 ... 10 s. (6) Use AF 1350 in case of mechanical interlock.
Power circuit diagram Control circuit diagrams - Remote control
A 9 ... AF 1650 Contactors A 9 ... A 300 Contactors AF 400 ... AF 1650 Contactors
Star-Delta Starting
of Three-Phase Asynchronous Motors
E2321DG
1314
1314
Y
KM2 L
KM2 KM1KM3 KM2
2122
21
22
O
I
FR1
23
KM1
24
15
16
A1
A2
KT
t1+t2t1
18
95
96
A1A2
A1A2
A1
A2
KM3 KM1
TE5S Electronic Timer
Dwelling time = 50 ms
Us
N
KM3 : 3/L2
KM3 : 5/L3
Us
1314
1314
Y
KM2 L
KM2 KM1
KM3 KM2
2122
21
22
O
I
FR1
23
KM1
24
KT
9596
A1A2
A1A2
A1
A2
KM3 KM1
Standard Timer
Without dwelling time
TP... pneumatic timer + N... contactor relay
or C 565 electronic timer
Us
N
KM3 : 3/L2
KM3 : 5/L3
Us
Applications
Applications
2/52 Low Voltage Products
1SBC100122C0202
Control of Three-Phase Slip-Ring Motors
Contactor Selection
General
Three kinds of contactors are used to control three-phase slip-ring motors: the stator contactor, the acceleration contactor(s) and the rotor short-
circuit contactor. Refer to the diagram opposite.
The selection tables below concern complete smooth starting, excluding specific cases, such as: intermittent operation, regenerative current,
controlled slipping, etc. for which you need to consult our specialised departments.
The starting and breaking technical data for slip-ring motors are defined in standard IEC 60947-4-1 in the AC-2 utilization category.
Operating cycle
The load factor is defined by the equation: L. F. (%) = x 100
Cycle time (Operating cycle + Rest cycle)
Stator Contactor
Closing of the starting current, conditioned by the value of the rotor resistances: it may reach 1.5 to 4 times rated motor operational current.
Breaking of the rated operational current, or of the starting current, with possible regenerative current.
The following table gives the permissible values of the Ie / AC-2 rated operational stator current, as a function of load factor.
Temperature of 55 °C maximum near the contactor.
Maximum switching frequency and Electrical durability in AC-2 category: see "Technical Data".
Contactors A 9 A 12 A 16 A 26 A 30 A 40 A 50 A 63 A 75 A 95 A 110
Load factor 15% Ie / AC-2 A13.5 19 26 35 50 55 70 95 125 200 220
25% Ie / AC-2 A12 17 23 32 45 50 63 85 110 165 185
40% Ie / AC-2 A10.5 15 19.5 27 39 42 54 73 95 135 150
60% Ie / AC-2 A9.5 13 17.5 24 34 37 48 65 85 120 135
S7 acc. to IEC 34-1: periodical
continuous duty with electrical braking A9121726323545607596110
Acceleration Contactors
The sizing of these contactors is based on the AC-1 rated
operational current (see "Technical Data") that we recall
below for the maximum ambient temperature of 55 °C.
Delta connection of these contactors is considered
(reduce currents by 35% if star connection is used).
The table opposite lists the factors to be applied to the
AC-1 current of the contactors in order to obtain the
permissible limit value of the motor rated operational rotor
current. This table takes into account the number of cycles
an hour (without inching) and the current flow time per cycle,
in the contactor.
Contactors A 9 A 12 A 16 A 26 A 30 A 40 A 50 A 63 A 75 A 95 A 110
Rated operational current Ie / AC-1
for air temperature near the
contactor 55 °CA22 25 27 40 55 60 85 95 105 135 145
Rotor Short-Circuit Contactor
The duty of this contactor is characterised by small closing stresses. The decisive factor is the thermal stress. Delta connection of the contactor
is considered (reduce currents by 35% if star connection is used).
The following table gives the permissible values of the rated operational rotor current, as a function of load factor.
Temperature: 55 °C maximum near the contactor.
Contactors A 9 A 12 A 16 A 26 A 30 A 40 A 50 A 63 A 75 A 95 A 110
Load factor 15% A45 58 70 105 112 125 160 210 245 290 330
25% A40 51 63 93 102 115 140 180 215 260 300
40% A35 42 54 80 87 95 120 155 185 230 260
60% A30 39 47 70 76 86 110 140 163 200 230
S7 acc. to IEC 34-1: periodical
continuous duty with electrical braking A28 35 40 58 72 85 100 130 152 170 200
Rated operational rotor voltage:
Maximum values V1100 2200
for starting and breaking (1320 if star connection) (2600)
Maximum values V550 690
for starting and electrical braking (600 if star connection) (730)
Number of cycles an hour 13612203060120
Current flow time per cycle Factors applicable to Ie / AC-1
5 s 5.2 4.9 4.7 4.3 4.0 3.7 3.4 2.8
10 s 3.8 3.6 3.4 3.1 3.0 2.8 2.6 2.2
20 s 2.8 2.7 2.6 2.5 2.4 2.2 2.0 1.6
30 s 2.4 2.3 2.2 2.1 2.1 1.9 1.7
40 s 2.2 2.1 2.0 1.9 1.9 1.7 1.5
60 s 1.9 1.8 1.8 1.7 1.7 1.5
2
Low Voltage Products 2/53
1SBC100122C0202
Example of a Three-Stroke Starter
The first stroke corresponds to energisation of the
motor by the stator contactor: all the resistances are
operational in the rotor circuit.
At the second stroke, the acceleration contactor
short-circuits the first resistance stack.
At the third stroke, the rotor short-circuit contactor
is activated by eliminating the last resistance stack,
thus completing the starting period.
The selection table for A 9 ... A 110 contactors can be used for the AL 9 ... AE 110 types.
The selection table for A 50 ... A 300 contactors can be used for the AF 50 ... AF 300 types.
Contactors A 145 A 185 A 210 A 260 A 300 AF 400 AF 460 AF 580 AF 750 AF 1350 AF 1650
Load factor 15% Ie / AC-2 A335 360 425 530 625 850 950 1150 1500 1720 2100
25% Ie / AC-2 A270 300 350 440 515 680 780 975 1250 1430 1750
40% Ie / AC-2 A215 250 300 370 430 580 650 800 1050 1200 1470
60% Ie / AC-2 A180 220 255 315 370 480 550 700 900 1030 1250
S7 acc. to IEC 34-1: periodical
continuous duty with electrical braking A145 185 210 260 305 400 460 580 750 860 1050
Contactors A 145 A 185 A 210 A 260 A 300 AF 400 AF 460 AF 580 AF 750 AF 1350 AF 1650
Rated operational current Ie / AC-1
for air temperature near the
contactor 55 °CA230 250 300 350 400 500 600 700 800 1150 1450
Contactors A 145 A 185 A 210 A 260 A 300 AF 400 AF 460 AF 580 AF 750 AF 1350 AF 1650
Load factor 15% A540 580 750 830 950 1200 1400 1650 1900 2400 2800
25% A490 530 650 725 830 1050 1250 1450 1650 2100 2500
40% A425 460 575 630 720 950 1100 1300 1450 1850 2200
60% A375 400 500 575 650 810 975 1150 1300 1650 1950
S7 acc. to IEC 34-1: periodical
continuous duty with electrical braking A325 350 430 480 550 700 840 980 1150 1500 1800
Rated operational rotor voltage:
Maximum values V2200 3000
for starting and breaking
(2600 if star connection)
(3600 if star connection)
Maximum values V690
for starting and electrical braking
(730 if star connection)
Stator
contactor
Acceleration
contactor
Rotor short-circuit
contactor
R2 R1
E1144DG
M
3
Control of Three-Phase Slip-Ring Motors
Contactor Selection
Applications
Applications
2/54 Low Voltage Products
1SBC100122C0202
General
An autotransformer starter allows to start a
squirel cage motor with a reduced starting
current due to the reduced voltage within the
accelerating duration.
At the contrary of the Star-Delta wiring, this
autotransformer starting method needs three
wires and three terminals on the motor.
At the starting period, the motor is wired to the
autotransformer taps: the Star Contactor "KM3"
and the Autotransformer Contactor "KM2" are
closed, the motor is under reduced voltage.
Consequently, the torque is reduced as the
square of the applied voltage. The
autotransformers are generally equipped of
three taps at each phase in order to adapt the
starting parameters to the field requirements.
When the motor reaches 80 ... 95% of its
nominal speed, the Star Contactor opens. Then,
the Line Contactor "KM1" is making and the
Autotransformer Contactor is opening. This
starting process is done without any network
interruption.
Autotransformer Starters
Contactor Selection
E2129DG
KM1 KM2
T1
Autotransformer
Electrical distribution
KM3
Selection Table (Id starting current / In nominal current < 8 - Acceleration time < 20s - 30 cycles / h max.)
kW Motor ratings 50/60 Hz Contactors
KM1 KM2 KM3
Line Autotransformer taps: Star
220/240 V 380/400 V 415 V 440 V 690 V 90% 80% 70% 60%
47.5 7.5 7.5 9 A 16 A 16 A 12 A 9 A 9 A 9
6.5 11 11 11 15 A 26 A 26 A 16 A 16 A 12 A 16
11 18.5 18.5 18.5 22 A 40 A 30 A 26 A 26 A 16 A 26
15 22 22 22 30 A 50 A 40 A 30 A 30 A 26 A 30
18.5 30 30 30 37 A 63 A 50 A 40 A 40 A 26 A 40
22 37 37 37 40 A 75 A 63 A 50 A 40 A 30 A 40
25 45 45 45 55 A 95 A 95 A 63 A 50 A 40 A 50
30 55 55 55 75 A 110 A 110 A 95 A 63 A 50 A 63
45 75 75 75 110 A 145 A 145 A 110 A 95 A 75 A 95
55 90 90 90 132 A 185 A 145 A 145 A 110 A 95 A 95
59 110 110 110 160 A 210 A 185 A 145 A 145 A 95 A 110
80 140 140 140 200 A 260 A 260 A 185 A 145 A 110 A 145
90 160 160 160 250 A 300 A 260 A 210 A 185 A 145 A 185
110 200 220 220 315 AF 400 AF 400 A 260 A 210 A 185 A 185
132 250 250 250 355 AF 460 AF 400 A 300 A 260 A 185 A 210
160 315 355 355 500 AF 580 AF 580 AF 400 A 300 A 210 A 300
220 400 425 450 600 AF 750 AF 750 AF 580 AF 400 A 300 AF 400
257 475 500 560 AF 1350 AF 750 AF 580 AF 460 AF 400 AF 460
315 560 600 670 AF 1650 AF 1350 AF 750 AF 580 AF 460 AF 580
The selection table for A 9 ... A 110 contactors can be used for the AL 9 ... AE 110 types.
The selection table for A 50 ... A 300 contactors can be used for the AF 50 ... AF 300 types.
2
Low Voltage Products 2/55
1SBC100122C0202
LV/LV Three-phase Transformer Switching
Contactor Selection
AC-6a Utilization Category according to IEC 60947-4-1
General
Switching the primary of 3-phase transformers, on energization of the transformer, is characterized by high current peaks due to the magnetization
phenomena. These current peaks are roughly 20 to 30 times the transformer nominal current.
Selection Table
The tables below show the operational ratings for a maximum switching frequency of 60 operating cycles per hour.
Table for 9 to 110 A ratings
a.c. operated contactors A 9 A 12 A 16 A 26 A 30 A 40 A 50 A 63 A 75 A 95 A 110
a.c. / d.c. operated (electronic coil interface) ––––––AF 50AF 63AF 75AF 95AF 110
d.c. operated contactors AL 9 AL 12 AL 16 AL 26 AL 30 AL 40 AE 50 AE 63 AE 75 AE 95 AE 110
Operational power at Ue: 50/60 Hz - according to AC-6a
220/240 V kVA 4459.51315 19 20 22 23 26
380/400 V kVA 77816.5 22 26 33 35 37.5 39 46
415/440 V kVA 889182428.5 36 38 41 43 50
500 V kVA 9.5 9.5 10.5 21.5 28 34.5 43 46 49 52 60
660/690 V kVA 12.5 12.5 14 28.5 37 45.5 57 60.5 65 68 80
Max. permissible Îpeak A330 330 360 750 1000 1200 1500 1600 1700 1800 2100
Table for 145 to 1650 A ratings
a.c. operated contactors A 145 A 185 A 210 A 260 A 300
a.c. / d.c. operated (electronic coil interface) AF 145 AF 185 AF 210 AF 260 AF 300 AF 400 AF 460 AF 580 AF 750
AF 1350 AF 1650
d.c. operated contactors –––––––––––
Operational power at Ue: 50/60 Hz - according to AC-6a
220/240 V kVA 35 45 50 55 60 95 100 110 130 160 190
380/400 V kVA 60 75 90 95 100 165 170 190 240 275 350
415/440 V kVA 65 80 100 110 115 180 190 210 270 325 390
500 V kVA 80 100 120 130 140 220 230 250 320
660/690 V kVA 105 130 150 170 180 290 300 310 410
Max. permissible Îpeak kA 3.0 3.5 4.2 4.6 5.0 7.7 8.4 9.3 12.0
Applications
Applications
2/56 Low Voltage Products
1SBC100122C0202
E1146D
S
S
E1145D
S
Lighting Circuit Switching
Contactor Selection
General
Contactor selection criteria for control of lighting circuits are as follows:
type, power rating and number of lamps,
connection mode,
current values on closing and in steady state,
power factor,
presence or not of correction capacitors.
Lighting circuits
In a given circuit, the number and power rating of lamps are defined and cannot result in overload. Only short-circuit protection has to be provided.
gG fuses or modular circuit-breakers will be chosen for this purpose.
The lamps have very specific technical data, according to their construction type.
Incandescent lamps have a very high current on closing: more than 15 times nominal current.
They do not introduce a large phase displacement between current and voltage.
Fluorescent tubes are equipped with a ballast whose purpose is two-fold: contribute to ignition and limit current to nominal value once steady state
is reached. This ballast is a reactor that considerably lowers the power factor. It may or may not be compensated.
Individual compensation Serial compensation in dual mounting
(parallel compensation)
Selection of Contactors
The following tables indicate, for each contactor type, the maximum permissible number of lamps per phase. Air temperature, near the contactor,
must be limited to 55 °C.
Numbers are given for a 230 V voltage distributed between phase and neutral: single-phase (phase + neutral) or three-phase (3 phases + neutral)
distribution, lamps are wired in star connection.
In the case of a three-phase supply without neutral, 230 V phase-to-phase, the permissible number of lamps per phase will be that given in the tables
multiplied by 0.58.
Example: 120 x 100W / 230V incandescent lamps - 400 V three-phase network with distributed neutral.
Calculate the number of lamps per phase: 120 : 3 = 40. On the 100 W line of the incandescent lamp table, contactor A12 is limited
to 38 lamps per phase, you must thus select contactor A 16 which accepts up to 42 lamps per phase.
The selection table for A 50 ... A 110 contactors can be used for the AF 50 ... AF 110 types.
The selection table for AL 9 ... AE 110 contactors can be used for the TAL 9 ... TAE 110 types.
Contactor Selection Tool for Lighting Circuit Switching
Tool for selection of the contactors according to the lamp technologies.
Available on the ABB Website:
www.abb.com/lowvoltage
right menu: "Support"
search: "Online Product Selection Tools"
select: "Contactors: Lighting Circuit Switching"
2
Low Voltage Products 2/57
1SBC100122C0202
Lighting Circuit Switching
Contactor Selection
Selection Table
a.c. operated contactors A 9 A 12 A 16 A 26 A 30 A 40 A 50 A 63 A 75 A 95 A 110
d.c. operated contactors AL 9 AL 12 AL 16 AL 26 AL 30 AL 40 AE 50 AE 63 AE 75 AE 95 AE110
Lamp characteristics Maximum permissible number of lamps per phase
WA µF
Incandescent and halogen lamps according to AC-5b
Voltage: 220/240 V a.c.
60 0.27 57 65 70 103 142 155 220 246 272 355 390
100 0.45 34 38 42 62 85 93 132 147 163 210 240
200 0.91 17 19 20 30 42 46 65 73 80 105 120
300 1.37 11 12 13 20 28 30 43 48 53 70 80
500 2.28 6 7 8 12 16 18 26 29 32 42 48
1000 4.55 3 4 4 6 8 9 13 14 16 21 24
Fluorescent lamps without compensation - Fluorescent lamps with electronic starter according to AC-5a
Voltage: 220/240 V a.c.
20 0.38 40 44 50 73 100 110 157 173 192 250 278
40 0.45 33 37 42 62 84 93 133 145 162 210 234
65 0.70 21 24 27 40 54 60 85 94 104 135 150
80 0.80 18 21 23 35 47 52 75 82 91 118 132
100 1.15 13 14 16 24 33 36 52 57 63 82 92
110 1.20 12 14 15 23 31 35 50 55 60 79 88
Fluorescent lamps with parallel compensation according to AC-5a
Voltage: 220/240 V a.c.
20 0.18 5 83 94 105 155 215 233 335 360 400 530 580
40 0.26 5 58 65 75 107 150 160 230 255 280 365 400
65 0.42 7 35 40 45 66 92 100 142 158 173 225 250
80 0.52 7 28 32 36 53 74 80 115 126 140 180 200
100 0.65 16 23 26 29 43 59 64 92 101 112 145 160
110 0.70 18 21 24 27 40 55 59 85 94 104 135 150
Fluorescent lamps in dual mounting according to AC-5a
Voltage: 220/240 V a.c.
2 x 20 2 x 0.14 2 x 54 2 x 62 2 x 67 2 x 99 2 x 137 2 x 148 2 x 214 2 x 236 2 x 260 2 x 336 2 x 375
2 x 40 2 x 0.25 2 x 30 2 x 35 2 x 38 2 x 56 2 x 77 2 x 84 2 x 120 2 x 133 2 x 147 2 x 190 2 x 208
2 x 65 2 x 0.40 2 x 19 2 x 21 2 x 23 2 x 35 2 x 48 2 x 52 2 x 75 2 x 83 2 x 90 2 x 120 2 x 130
2 x 80 2 x 0.48 2 x 16 2 x 18 2 x 19 2 x 29 2 x 40 2 x 43 2 x 62 2 x 68 2 x 76 2 x 100 2 x 110
2 x 100 2 x 0.60 2 x 12 2 x 14 2 x 15 2 x 22 2 x 32 2 x 34 2 x 49 2 x 55 2 x 60 2 x 80 2 x 88
2 x 110 2 x 0.65 2 x 11 2 x 13 2 x 14 2 x 21 2 x 29 2 x 32 2 x 46 2 x 51 2 x 56 2 x 73 2 x 82
Compact fluorescent lamps according to AC-5a
Voltage: 220/240 V a.c.
5 0.045 342 388 422 622 855 930 1330 1470 1630 2100 2350
7 0.075 205 233 252 372 512 558 798 886 978 1250 1400
11 0.105 146 166 180 266 366 398 570 632 700 900 1000
15 0.135 114 128 140 205 285 310 440 490 540 700 780
20 0.160 96 109 118 175 240 262 375 415 458 590 650
23 0.180 85 96 105 155 212 230 330 368 408 525 580
Applications
Applications
2/58 Low Voltage Products
1SBC100122C0202
Lighting Circuit Switching
Contactor Selection
Selection Table
a.c. operated contactors A 9 A 12 A 16 A 26 A 30 A 40 A 50 A 63 A 75 A 95 A 110
d.c. operated contactors AL 9 AL 12 AL 16 AL 26 AL 30 AL 40 AE 50 AE 63 AE 75 AE 95 AE110
Lamp characteristics Maximum permissible number of lamps per phase
WA µF
Low pressure sodium vapour lamps without compensation
Voltage: 220/240 V a.c.
35 1.4 10 11 121723263641455863
55 1.4 10 11 121723263641455863
90 2.1 6 7 8 11 16 17 24 27 30 39 42
135 3.1 4 5 5 8 11 121618202628
180 3.1 4 5 5 8 11 121618202628
Low pressure sodium vapour lamps with parallel compensation
Voltage: 220/240 V a.c.
35 0.6 20 21 23 25 38 46 50 83 96 104 135 147
55 0.6 20 21 23 25 38 46 50 83 96 104 135 147
90 0.9 25 14 15 17 25 31 33 56 64 69 90 98
135 0.9 45 14 15 17 25 31 33 56 64 69 90 98
180 0.9 45 14 15 17 25 31 33 56 64 69 90 98
High pressure sodium vapour lamps without compensation
Voltage: 220/240 V a.c.
150 1.8 6 7 8 11 15 17 23 26 29 38 41
250 3 4 4 5 7 9 10 14 16 17 23 25
400 4.4 3 3 3 4 6 7 9 10 12 15 17
600 6.2 1 2 2 3 4 57881112
1000 10.3 1 1 2 3 3 4 5 5 6 7
High pressure sodium vapour lamps with parallel compensation
Voltage: 220/240 V a.c.
150 1 20 13 14 152328305058638188
250 1.5 36 8 9 10 15 18 20 33 38 42 54 59
400 2.5 48 5 5 6911122023253236
600 3.3 65 4 4 57891517192427
1000 6.2 100 4 4 5 8 9 10 13 14
High pressure mercury vapour lamps without compensation
Voltage: 220/240 V a.c.
50 0.60 18 20 22 33 46 50 70 79 100 125 135
80 0.80 14 16 17 25 34 37 53 59 75 95 100
125 1.15 10 11 12 17 24 26 37 41 52 65 70
250 2.15 5 6 6 9 13 14 20 22 28 35 35
400 3.25 3 4 4 6 8 9 13 15 19 23 25
700 5.40 2 2 2 4 5 5 8 9 11 14 15
1000 7.50 1 1 2 3 4 4 6 6 8 10 11
Voltage: 380/415 V a.c.
2000 8 1 1 1 2 3 4 5 6 7 9 10
High pressure mercury vapour lamps with compensation
Voltage: 220/240 V a.c.
50 0.28 7 39 44 48 71 98 107 150 169 214 270 290
80 0.43 8 25 29 31 46 64 70 99 110 139 170 185
125 0.66 10 16 19 20 30 42 45 64 72 90 110 120
250 1.28 18 8 10 10 16 21 23 33 37 47 57 60
400 2.05 25 5 6 7 10 13 15 21 23 29 34 38
700 3.55 40 3 3 4 6 8 8 12 13 17 20 23
1000 4.83 60 2 2 3 4 6 6 9 10 12 14 16
Voltage: 380/415 V a.c.
2000 5.45 35 2 2 2 3 5 5 8 9 11 13 15
2
Low Voltage Products 2/59
1SBC100122C0202
Lighting Circuit Switching
Contactor Selection
Selection Table
a.c. operated contactors A 9 A 12 A 16 A 26 A 30 A 40 A 50 A 63 A 75 A 95 A 110
d.c. operated contactors AL 9 AL 12 AL 16 AL 26 AL 30 AL 40 AE 50 AE 63 AE 75 AE 95 AE110
Lamp characteristics Maximum permissible number of lamps per phase
WA µF
Metal iodine vapour lamps without compensation
Voltage: 220/240 V a.c.
250 3 4 4 5710111517192527
400 4–3345781113141820
1000 9.5 1 1 123355688
2000 16.5 112233355
Voltage: 380/415 V a.c.
2000 10.5 1 1 123345678
Metal iodine vapour lamps with compensation
Voltage: 220/240 V a.c.
250 1.32 33 9 10 11 16 23 25 35 39 44 56 60
400 2.22 45 5 6 7 10 13 15 21 23 26 33 36
1000 5.14 85 2 3 3466910111415
2000 11.5 148 1 1 122344567
Voltage: 380/415 V a.c.
2000 6.1 60 2 2 23557891213
Applications
Applications
2/60 Low Voltage Products
1SBC100122C0202
A 829D
A 830D
A 831D
A 832D
A 829D
A 830D
A 831D
A 832D
A 829D
A 830D
A 831D
A 832D
General
The arc switching on d.c. is more difficult than on a.c.
For selecting a contactor it is essential to determine the current, the voltage and the L/R time constant of the controlled load.
For information, typical time constant values are quoted hereafter: non inductive loads such as resistance furnaces (L/R ~ 1 ms), inductive loads
such as shunt motors (L/R ~ 2 ms) or series motors (L/R ~ 7.5 ms).
The addition of a resistor in parallel with an inductive winding helps in the elimination of the arcs.
All the poles required for breaking must be connected in series between the load and the source polarity not linked to earth (or chassis).
Selection Table - After selection from the ratings quoted in the tables below, please refer to "Ordering Details".
a.c. operated contactors A 9 A 12 A 16 A 26 A 30 A 40 A 45 A 50 A 63 A 75 GA 75
a.c. / d.c. operated (electronic coil interface) ––––––AF 45AF 50 AF 63 AF 75
d.c. operated contactors AL 9 AL 12 AL 16 AL 26 AL 30 AL 40 AE 45 AE 50 AE 63 AE 75 GAE 75
Utilization category DC-1, L/R < 1 ms
< 72 V A25 27 30 45 55 60 70 100 110 120 120
110 V A10 15 20 120
220 V A––––––––––120
440 V A––––––––––100
600 V A––––––––––75
< 72 V A25 27 30 45 55 60 70 100 110 120
110 V A25 27 30 45 55 60 70 100 110 120
220 V A10 15 20
< 72 V A25 27 30 45 55 60 70 100 110 120
110 V A25 27 30 45 55 60 70 100 110 120
220 V A25 27 30 45 55 60 70 100 110 120
< 72 V A25 27 30 45 70 100 120
110 V A25 27 30 45 70 100 120
220 V A25 27 30 45 70 100 120
440 V A10 15 20
Utilization category DC-3, L/R < 2 ms
< 72 V A25 27 30 45 55 60 70 100 110 120 120
110 V A678–––––––120
220 V A––––––––––100
440 V A––––––––––85
< 72 V A25 27 30 45 55 60 70 100 110 120
110 V A25 27 30 45 55 60 70 100 110 120
220 V A678––––––––
< 72 V A25 27 30 45 55 60 70 100 110 120
110 V A25 27 30 45 55 60 70 100 110 120
220 V A25 27 30 45 55 60 70 100 110 120
< 72 V A25 27 30 45 70 100 120
110 V A25 27 30 45 70 100 120
220 V A25 27 30 45 70 100 120
440 V A678––––––––
Utilization category DC-5, L/R < 7.5 ms
< 72 V A912162530405050637585
110 V A444–––––––85
220 V A––––––––––85
440 V A––––––––––35
< 72 V A25 27 30 45 55 60 70 100 110 120
110 V A10 15 20 30 45 50 70 80 90 100
220 V A444––––––––
< 72 V A25 27 30 45 55 60 70 100 110 120
110 V A25 27 30 45 55 60 70 100 110 120
220 V A9121625304050506375–
< 72 V A25 27 30 45 70 100 120
110 V A25 27 30 45 70 100 120
220 V A10 15 20 30 70 70 100
440 V A444––––––––
d.c. Circuit Switching
Contactor Selection
2
Low Voltage Products 2/61
1SBC100122C0202
A 829D
A 830D
A 831D
A 829D
A 830D
A 831D
A 829D
A 830D
A 831D
The selection table for AL 9 ... AE 110 contactors can be used for the TAL 9 ... TAE 110 types.
a.c. operated contactors A 95 A 110 A 145 A 185 A 210 A 260 A 300
a.c. / d.c. operated (electronic coil interface) AF 95 AF 110 AF 145 AF 185 AF 210 AF 260 AF 300 AF 400 AF 460 AF 580 AF 750
d.c. operated contactors AE 95 AE 110 ––––––––
Utilization category DC-1, L/R < 1 ms
< 110 V A–––––––6007008001050
< 110 V A145 160 250 275 350 400 450 600 700 800 1050
220 V A–––––––6007008001050
< 110 V A145 160 250 275 350 400 450 600 700 800 1050
220 V A145 160 250 275 350 400 450 600 700 800 1050
440 V A–––––––6007008001050
600 V A–––––––6007008001050
Utilization category DC-3, L/R 2.5 ms
< 110 V A–––––––6007008001050
< 110 V A145 160 250 275 350 400 450 600 700 800 1050
220 V A–––––––6007008001050
< 110 V A145 160 250 275 350 400 450 600 700 800 1050
220 V A145 160 250 275 350 400 450 600 700 800 1050
440 V A–––––––6007008001050
600 V A–––––––6007008001050
Utilization category DC-5, L/R 15 ms
< 110 V A–––––––6007008001050
< 110 V A145 160 250 275 350 400 450 600 700 800 1050
220 V A–––––––6007008001050
< 110 V A145 160 250 275 350 400 450 600 700 800 1050
220 V A145 160 250 275 350 400 450 600 700 800 1050
440 V A–––––––6007008001050
600 V A–––––––6007008001050
Technical Data
The tables indicate for the standard contactors the Ie max. operating currents depending on: the utilization category (i.e. L/R) DC-1, DC-3, DC-5
as defined in the IEC 60947-4-1 publication, the operating voltage Ue and the pole coupling details.
Ampere values quoted in these tables are valid for a -25 … +70 °C temperature close to the contactors, as long as the AC-1 Ampere values for
the corresponding ambient temperature are not exceeded.
Max. switching frequency: 300 cycles/h.
For switching higher d.c. ratings, we recommend the use of bar mounted contactors, R series (63 … 2000 A).
d.c. Circuit Switching
Contactor Selection
Applications
Applications
>> AC-1 Ampere values .................. pages 2/64, 2/65 >> Accessories ............................................. section 4 >> Utilization Categories ............................ section 7
2/62 Low Voltage Products
1SBC100122C0202
A 829D
A 830D
A 831D
A 832D
A 829D
A 830D
A 831D
A 832D
A 830D
A 831D
A 832D
General
The arc switching on d.c. is more difficult than on a.c.
For selecting a contactor it is essential to determine the current, the voltage and the L/R time constant of the controlled load.
For information, typical time constant values are quoted hereafter: non inductive loads such as resistance furnaces (L/R ~ 1 ms), inductive loads
such as shunt motors (L/R ~ 2 ms) or series motors (L/R ~ 7.5 ms).
The addition of a resistor in parallel with an inductive winding helps in the elimination of the arcs.
All the poles required for breaking must be connected in series between the load and the source polarity not linked to earth (or chassis).
Technical Data
The tables indicate for the standard contactors the Ie max. operating currents depending on: the utilization category (i.e. L/R) DC-1, DC-3, DC-5
as defined in the IEC 60947-4-1 publication, the operating voltage Ue and the pole coupling details.
Ampere values quoted in the tables below are valid for a -25 … +70 °C temperature close to the contactors, as long as the AC-1 Ampere values
for the corresponding ambient temperature are not exceeded.
Max. switching frequency: 300 cycles/h.
For switching higher d.c. ratings, we recommend the use of bar mounted contactors, R series (63 … 2000 A).
Selection Table - After selection from the ratings quoted in the tables below, please refer to "Ordering Details".
a.c. / d.c. operated contactors EK 110 EK 150 EK 175 EK 210 EK 370 EK 550 EK 1000
Utilization category DC-1, L/R < 1 ms
< 72 V A120 145 210 210 370 550
110 V A120 145 210 210 370 550
< 72 V A200 200 300 300 550 800
110 V A200 200 300 300 550 800
220 V A200 200 300 300 550 800
< 72 V A200 200 300 300 550 800
110 V A200 200 300 300 550 800
220 V A200 200 300 300 550 800
440 V A––210 210 450 650
600 V A––450 650
< 72 V A200 200 300 300 550 800
110 V A200 200 300 300 550 800
220 V A200 200 300 300 550 800
440 V A200 200 260 300 450 650
600 V A––260 300 450 650
Utilization category DC-3, L/R < 2 ms
< 72 V A120 145 210 210 370 550
< 72 V A135 145 210 210 450 650
110 V A135 135 210 210 450 650
220 V A135 135 210 210 450 650
< 72 V A135 145 210 210 450 650
110 V A135 135 210 210 450 650
220 V A135 135 210 210 450 650
440 V A––210 210 450 650
600 V A––450 650
< 72 V A135 145 210 210 450 650
110 V A135 135 210 210 450 650
220 V A135 135 210 210 450 650
440 V A135 135 210 210 450 650
600 V A––170 210 450 650
Utilization category DC-5, L/R < 7.5 ms
< 72 V A135 145 210 210 450 650
110 V A135 135 210 210 450 650
220 V A135 135 210 210 450 650
< 72 V A135 145 210 210 450 650
110 V A135 135 210 210 450 650
220 V A135 135 210 210 450 650
440 V A––210 210 450 650
600 V A––450 650
< 72 V A135 145 210 210 450 650
110 V A135 135 210 210 450 650
220 V A135 135 210 210 450 650
440 V A135 135 210 210 450 650
600 V A––170 210 450 650
d.c. Circuit Switching
EK... Contactor Selection
>> AC-1 Ampere values ............................. page 2/76 >> Accessories ............................................. section 4 >> Utilization Categories ............................ section 7
2
Low Voltage Products 2/63
1SBC100122C0202
Applications
Applications
Auxiliary Contacts for Safety Circuits
3-pole Contactors
Mechanically Linked Contact Elements for Contactors
(known as "forced contacts", "positively activated contacts" or "linked contacts").
Definitions from standards: mechanically linked contact elements according to IEC 60947-5-1, Annex L 3.0.
Combination of "n" Make auxiliary contact element(s) and "m" Break auxiliary contact element(s) are designed in such a way that they cannot be
in the closed position simultaneously.
One control circuit device may have more than one group of mechanically linked contact elements.
The table below gives the contactors that offer mechanically linked auxiliary contacts according to IEC 60947-5-1, Annex L.
Mirror Contacts
Definitions from standards: mirror contact according to IEC 60947-4-1, Annex F 2.1.
Normally closed auxiliary contact (N.C.) which cannot be in the closed position simultaneously with the normally open (N.O.) main contact.
The table below indicates the contactors that offer a built-in auxiliary mirror contact.
The CA 5-13, CA 5-22, CA 5-31, CA 5-04 and CA 5-01 (respectiv ely 4-pole and 1-pole auxiliary contact bloc ks) and the CAL 5-11 (2-pole auxiliary
contact block) when fitted on A 9 ... A 75, AF 45 ... AF 75 or AL 9 ... AL 40 contactors have their own N.C. auxiliary mirror contacts.
The CAL 18-11 2-pole auxiliary contact bloc ks when fitted on A 95 ... A 300 and AF 95 ... AF 750 contactors have their own N.C. auxiliary mirror
contacts.
For AF 1350, AF 1650 use 2 N.C. auxiliary contacts in series for mirror contact, one CAL 18-11 on each side of the contactor.
3-pole A... and AL... contactors +one CA 5-... 4-pole add-on auxiliary contact block
Contactors Built-in auxiliary Add-on auxiliary contact blocks
contacts +CA 5-22... or CA 5-31... or CA 5-40...
A/AL 9-30-10 1– 22 31
A/AL 9-30-01 –1 22 31 4
A/AL 12-30-10 1– 22 31
A/AL 12-30-01 –1 22 31 4
A/AL 16-30-10 1– 22 31
A/AL 16-30-01 –1 22 31 4
A/AL 26-30-10 1– 22 31
A/AL 26-30-01 –1 22 31 4
A/AL 30-30-10 1– 22 31
A/AL 30-30-01 –1 22 31 4
A/AL 40-30-10 1– 22 31
A/AL 40-30-01 –1 22 31 4
The information provided for AL contactors can also be used for AL..Z... and TAL... contactors.
For each contactor type, see "Accessory Fitting Details".
Direct Opening Action of N.C. Built-in Auxiliary Contacts
Annex K2.1 of IEC 60947-5-1 defines a control switch with direct opening action: "the full contact opening of the break contact element(s) is
obtained when the actuator is moved through the direct opening travel by applying the force stated by the manufacturer".
The N.C. built-in auxiliary contacts of contactors ARE NOT CONCERNED by the annex K.
Nev ertheless, N.C . auxiliary contacts are designed to hav e "direct opening action" and are suitab le f or uses such as lifts / elevators (acc. to EN 81-1).
>> Accessories Fitting Details .................................................................................................................................................................................................................. pages 2/8, 2/12, 2/17
2/64 Low Voltage Products
1SBC100122C0202
M
3
M
3
A... and AF... Contactors
AL..., TAL... and AE..., TAE... Contactors
Technical Data
Main Pole - Utilization Characteristics acc. to IEC
Contactor types: A... 9 12 16 26 30 40 45 50 63 75 95 110
AL..., TAL... 9 12 16 26 30 40
AE..., TAE..., AF... 45 50 63 75 95 110
Rated operational voltage Ue max. V690 1000 (690 for AF... contactors) 1000
Rated frequency limits Hz 25 ... 400
Conventional free-air thermal current I
th
acc. to IEC 60947-4-1, open contactors, θ 40 °C
A26 28 30 45 65 65 100 100 125 125 145 160
with conductor cross-sectional area mm244461616 35 35 50 50 50 70
Rated operational current Ie / AC-1
for air temperature close to contactor
θ 40 °CA25 27 30 45 55 60 70 100 115 125 145 160
U
e
max. 690 V - 50/60 Hz
θ 55 °CA22 25 27 40 55 60 60 85 95 105 135 145
θ 70 °C(3) A18 20 23 32 39 42 50 70 80 85 115 130
with conductor cross-sectional area mm22.5 4 4 6 10 16 25 35 50 50 50 70
Utilization category AC-3
for air temperature close to contactor < 55 °C
Max. rated operational current I
e
AC-3 (1)
220-230-240 V A912172633404053 6575 96110
3-phase motors 380-400 V A912172632373750 6575 96110
415 V A912172632373750 6575 96110
440 V A912162632373745 6570 93100
500 V A912142228333345 5565 80100
690 V A791017
(4)
21
(4)
25
(4)
25 35 43 46 65 82
1000 V A––––––23 (6) 25 (6) 28 (6) 30 30
Rated operational power AC-3 (1)
1500 r.p.m. 50 Hz 220-230-240 V kW 2.2 3 4 6.5 9 11 11 15 18.5 22 25 30
1800 r.p.m. 60 Hz 380-400 V kW 45.5 7.5 11 15 18.5 18.5 22 30 37 45 55
3-phase motors 415 V kW 45.5 9 11 15 18.5 18.5 25 37 40 55 59
440 V kW 45.5 9 15 18.5 22 22 25 37 40 55 59
500 V kW 5.5 7.5 9 15 18.5 22 22 30 37 45 55 59
690 V kW 5.5 7.5 9 15
(4)
18.5
(4)
22
(4)
22 30 37 40 55 75
1000 V kW ––––––30 (6) 33 (6) 37 (6) 40 40
Rated operational current I
e
/ AC-8a
without thermal O/L relay - Ue 400 V -
θ 40 °CA12 16 22 30 40 50 63 85 95 120 140
Rated making capacity AC-3 10 x Ie AC-3 acc. to IEC 60947-4-1
Rated breaking capacity AC-3 8 x Ie AC-3 acc. to IEC 60947-4-1
Short-circuit protection for contactors
without thermal O/L relay - Motor protection excluded (2)
Ue < 500 V a.c. - gG type fuse A25 32 32 50 63 80 100 125 160 160 200
Rated short-time withstand current I
cw
at 40 °C ambient temp., 1 s A250 280 300 400 600 1000 1320 1320
in free air, 10 s A100 120 140 210 400 650 800 800
from a cold state 30 s A60 70 80 110 225 370 500 500
1 min A50 55 60 90 150 250 350 350
15 min A26 28 30 45 65 110 110 135 135 160 175
Maximum breaking capacity
(5)
cos ϕ = 0.45 at 440 V A250 420 820
(5)
900 1300 1160
(cos ϕ = 0.35 for Ie > 100 A) at 690 V A90
(5)
170
(5)
340
(5)
490 630 800
Heat dissipation per pole
Ie / AC-1 W 0.8 1 1.2 1.8 2.5 3 2.5 5 6.5 7 6.5 7.5
Ie / AC-3 W 0.1 0.2 0.35 0.6 0.9 1.3 0.65 1.3 1.5 2 2.7 3.6
Max. electrical switching frequency
– for AC-1 cycles/h 600 600 (300 for AF..., AE... TAE...) 300
– for AC-3 cycles/h 1200 600 (300 for AF..., AE... TAE...) 300
– for AC-2, AC-4 cycles/h 300 150 150
Mechanical durability
– millions of operating cycles 10 (5 for AE... and TAE... contactors)
– max. switching frequency cycles/h 3600 (300 for AF... contactors)
(1) For the corresponding kW/A or hp/A values of
1500 r.p.m., 50Hz or 1800 r.p.m., 60Hz, 3-phase
motors, see "Motor Rated Operational Powers and
Currents".
(2) For the protection of motor starters against short
circuits, see "Coordination with Short-circuit
Protection Devices".
(3) Unauthorized for TAL..., TAE... contactors.
(6) AF... contactors excluded.
A... and AF... Contactors
AL..., TAL... and AE..., TAE... Contactors
Technical Data
{
>> Electrical Durability Curves .................. page 2/81 >> Motor Rated Powers and Currents ....... page 0/0 >> Coordination with SCPD ........................ section 7
(4) AC-3, 690 V values for AL... and TAL... contactors
Types AL 26 AL 30 AL 40
TAL 26 TAL 30 TAL 40
Rated current IeA13 18 21
Rated power kW 11 15 18.5
(5) Max. breaking capacity for AL... and TAL... contactors
Types
AL 9 ... AL 16 AL 26 AL 30, AL 40
TAL 9 ... TAL 16 TAL 26 TAL 30, TAL 40
440 V A250 420 470
690 V A100 106 175
2
Low Voltage Products 2/65
1SBC100122C0202
M
3
M
3
Main Pole - Utilization Characteristics acc. to IEC
Contactor types: A... 145 185 210 260 300
AF... 145 185 210 260 300 400 460 580 750 1350 1650
Rated operational voltage Ue max. V1000 690 1000
Rated frequency limits Hz 25 ... 400
Conventional free-air thermal current I
th
acc. to IEC 60947-4-1, open contactors, θ 40 °C
A250 275 350 400 500 600 700 800 1050 1350 1650
with conductor cross-sectional area (3)
mm2120 150 185 240 300
(5)
2 x 185 2 x 240 2 x 240
2
x
50x8
(4)
2 x 100x5
(4)
3 x 100x5
(4)
Rated operational current Ie / AC-1
for air temperature close to contactor
θ 40 °CA250 275 350 400
500 (5)
600 700 800 1050 1350 1650
U
e
max. 690 V - 50/60 Hz
θ 55 °CA230 250 300 350 400 500 600 700 875 1150 1450
θ 70 °CA180 180 240 290 325 400 480 580 720 1000 1270
θ 40 °CA180 200 600 700 800 1000 1350 1650
U
e
max. 1000 V - 50/60 Hz
θ 55 °CA180 200 500 600 700 875 1150 1450
θ 70 °CA180 180 400 480 580 720 1000 1270
with conductor cross-sectional area mm2120 150 185 240
240 (5)
2 x 185 2 x 240 2 x 240
2
x
50
x
8
(4)
2 x 100x5
(4)
3 x 100x5
(4)
Utilization category AC-3
for air temperature close to contactor < 55 °C
Max. rated operational current I
e
AC-3 (1)
220-230-240 V A145 185 210 260 305 400 460 580 750 860 1050
3-phase motors 380-400 V A145 185 210 260 305 400 460 580 750 860 1050
415 V A145 185 210 260 300 400 460 580 750 860 1050
440 V A145 185 210 240 280 400 460 580 750 860 1050
500 V A145 170 210 240 280 400 460 580 750 800 950
690 V A120 170 210 220 280 350 400 500 650 800 950
1000 V A80 95 155 200 250 300
Rated operational power AC-3
(1)
1500 r.p.m. 50 Hz 220-230-240 V kW 45 55 59 80 90 110 132 160 220 257 315
1800 r.p.m. 60 Hz 380-400 V kW 75 90 110 140 160 200 250 315 400 475 560
3-phase motors 415 V kW 75 90 110 140 160 220 250 355 425 500 600
440 V kW 75 90 110 140 160 220 250 355 450 560 670
500 V kW 90 110 132 180 200 250 315 400 520 560 700
690 V kW 110 132 160 200 250 315 355 500 600 750 900
1000 V kW 110 132 220 280 355 400
Rated making capacity AC-3 10 x Ie AC-3 acc. to IEC 60947-4-1
Rated breaking capacity AC-3 8 x Ie AC-3 acc. to IEC 60947-4-1
Short-circuit protection for contactors Please consult us
without thermal O/L relay - Motor protection excluded (2)
for coordination
Ue < 500 V a.c. - gG type fuse A315 355 400 500 630 800 1000 with circuit-breaker
Rated short-time withstand current I
cw
at 40 °C ambient temp., 1 s A1800 2000 2500 3500 4600 7000 10000 12000
in free air, 10 s A1200 1500 1700 2400 4400 6400 8000 10000
from a cold state 30 s A800 1000 1200 1500 3100 4500 6000 7500
1 min A600 800 1000 1100 2500 3500 4500 5500
15 min A280 320 400 500 840 1300 1600 2200
Maximum breaking capacity
cos ϕ = 0.45 at 440 V A1500 2000 2300 2600 3000 4000 5000 6000 7500 10000 12000
(cos ϕ = 0.35 for Ie > 100 A) at 690 V A1200 1600 2000 2400 2500 3500 4500 5000 7000
Heat dissipation per pole
Ie / AC-1 W 13 16 18 25 32 30 42 32 50 80
Ie / AC-3 W 5891418 16 21 17 28 50
Max. electrical switching frequency
– for AC-1 cycles/h 300 300 300 300 60
– for AC-3 cycles/h 300 300 300 300 60
– for AC-2, AC-4 cycles/h 150 150 60 60 60
Mechanical durability
– millions of operating cycles 5 3 0.5
max. switching frequency cycles/h 3600 (300 for AF... contactors) 300 60
(1) For the corresponding kW/A or hp/A values of 1500 r.p.m., 50Hz or 1800 r.p.m., 60Hz, 3-phase motors, (4) Dimensions of the bars (in mm).
see "Motor Rated Operational Powers and Currents". (5)
For currents above 450 A use 300 mm2 and terminal extension /
(2) For the protection of motor starters against short circuits, see "Coordination with Short-circuit Protection Devices".
enlargement
pieces (LX 300 / LW 300: see "Accessories").
(3) Conductors with preparation.
A... and AF... Contactors
Technical Data
{
Technical Data
Technical Data
>> Electrical Durability Curves .................. page 2/81 >> Motor Rated Powers and Currents ....... page 0/0 >> Coordination with SCPD ........................ section 7
{
2/66 Low Voltage Products
1SBC100122C0202
M
3
M
3
B2
AAB1
C2
C1
E0202D1
ABB
Main Pole - Utilization Characteristics acc. to UL/CSA
Contactor types: A... 9 12 16 26 30 40 45 50 63 75 95 110
AL..., TAL... 9 12 16 26 30 40
AE..., TAE..., AF... 45 50 63 75 95 110
NEMA size 00 0–11P–22 –3
General use rating
Amp-rating 600 V A21 25 30 40 50 60 80 80 90 105 125 140
3-phase motor rating
Amp-rating
(1) 200-208 V A7.8 11 17.5 25.3 32.2 32.2 48.3 48.3 62.1 78.2 92 92
220-240 V A6.8 9.6 15.2 28 28 42 54 54 68 80 80 104
440-480 V A7.6 11 14 27 34 40 52 52 77 77 77 96
550-600 V A911172732415252 7777 7799
Motor power
(1) 200-208 V hp 2357.5 10 10 15 15 20 25 30 30
220-240 V hp 2351010152020 2530 3040
440-480 V hp 5 7.5 10 20 25 30 40 40 60 60 60 75
550-600 V hp 7.5 10 15 25 30 40 50 50 75 75 75 100
Short-circuit protection for contactors
without thermal O/L relay - Motor protection excluded
Fuse rating A35 35 60 90 150 150 175 175 200 200 200 200
Fuse type, 600 V FRS-R J
Max. electrical switching frequency
– for general use cycles/h 600 600 (300 for AF..., AE...) 300
– f or motor use cycles/h 1200 600 (300 for AF..., AE...) 300
(1) For the corresponding kW/A or hp/A values of 1500 r.p.m., 50Hz or 1800 r.p.m., 60Hz, 3-phase motors, see "Motor Rated Operational Powers and Currents".
General Technical Data
Contactor types: A... 9 12 16 26 30 40 45 50 63 75 95 110
AL..., TAL... 9 12 16 26 30 40
AE..., TAE..., AF... 45 50 63 75 95 110
Rated insulation voltage Ui
according to IEC 60947-4-1 V1000
according to UL/CSA V600
Rated impulse withstand voltage U
imp.
kV 8
Standards Devices complying with IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
Air temperature close to contactor see "Conditions for use", for control voltage limits and authorized mounting positions
– fitted with thermal O/L relay °C-25 to +55
– without thermal O/L relay °C-40 to +70 (1)
– for storage °C-60 to +80 -40 to +70
Climatic withstand acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II
acc. to IEC 68-2-30
Operating altitude m < 3000
Shock withstand
acc. IEC 60068-2-27 and EN 60068-2-27
Mounting position 1 1/2 sinusoidal shock for 11 ms: no change in contact position
A 9 ... A 40 contactors AL 9 ... AL 40 contactors A 45 ... A 110 and
AF 45 ... AF 110 contactors
TAL 9 ... TAL 40 contactors AE 45 ... AE 110 and TAE 45 ... TAE 110 contactors
Shock Closed Open Closed Open Closed Open
Note :
for A 95,
direction position position position position position position
AE 95, TAE 95, AF 95
A 20 g 20 g 20 g 10 g 20 g 20 g A 110, AE110,
B1 10 g 5 g 15 g 5 g 10 g 5 g (2) TAE110, AF 110
B2 15 g 15 g 10 g 10 g 15 g (3) 15 g (3) contactors, these
C1 20 g 20 g 20 g 8 g 20 g 20 g values are not valid
C2 20 g 20 g 14 g 8 g 20 g 20 g for rail mounting.
(1) 55 °C max. for TAL... and TAE... contactors (2) 3 g for AF 45-22, AE 45-22, AF 75-22 and AE 75-22
(3) 10 g for AF 45-22, AE 45-22, AF 75-22 and AE 75-22
A... and AF... Contactors
AL..., TAL... and AE..., TAE... Contactors
Technical Data
>> Motor Rated Powers and Currents ....... page 0/0 >> Certification - Approvals ........................ section 7 >> Mounting Positions ............................... page 2/72
>> Motor Protection .................................... section 5 >> Conditions for Use ................................ page 2/72 >> Dimensions ............................................. section 9
2
Low Voltage Products 2/67
1SBC100122C0202
M
3
M
3
E1852D
B2
AAB1
C2
C1
ABB
Main Pole - Utilization Characteristics acc. to UL/CSA
Contactor types: A... 145 185 210 260 300
AF... 145 185 210 260 300 400 460 580 750 1350 1650
NEMA size 4––5–– 6 7 8
General use rating
Amp-rating 600 V A230 250 300 350 400 550 650 750 900 1350 1650
3-phase motor rating
Amp-rating
(1)
200-208 V A119.6 149.5 166.8 220.8 285.2 358.8 414 552 692.3 954 1030
220-240 V A130 145 192 248 248 360 480 604 722 954 1030
440-480 V A124 156 180 240 302 414 477 590 722 954 1030
550-600 V A125 144 192 242 289 382 472 578 672 944 1050
Motor power
(1)
200-208 V hp 40 50 60 75 100 125 150 200 250
220-240 V hp 50 60 75 100 100 150 200 250 300 400 450
440-480 V hp 100 125 150 200 250 350 400 500 600 800 900
550-600 V hp 125 150 200 250 300 400 500 600 700 1000 1150
Short-circuit protection for contactors
without thermal O/L relay - Motor protection excluded
Please consult us
Fuse rating A300 400 800 1000 1200 for coordination
Fuse type, 600 V J/K5 L with circuit-breaker
Max. electrical switching frequency
– for general use cycles/h 300 60
– for motor use cycles/h 300 60
(1) For the corresponding kW/A or hp/A values of 1500 r.p.m., 50Hz or 1800 r.p.m., 60Hz, 3-phase motors, see "Motor Rated Operational Powers and Currents".
General Technical Data
Contactor types: A... 145 185 210 260 300
AF... 145 185 210 260 300 400 460 580 750 1350 1650
Rated insulation voltage Ui
according to IEC 60947-4-1 V1000
according to UL/CSA V600
Rated impulse withstand voltage U
imp.
kV 8
Standards Devices complying with IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
Air temperature close to contactor see "Conditions for use", for control voltage limits and authorized mounting positions
– fitted with thermal O/L relay °C-25 to +55
– fitted with electronic O/L relay °C-25 to +70
– without O/L relay °C-40 to +70
– for storage °C-40 to +70
Climatic withstand acc. to IEC 60068-2-30
Operating altitude m < 3000
Shock withstand
acc. IEC 60068-2-27 and EN 60068-2-27
Mounting position 1 1/2 sinusoidal shock for 30 ms: no change in contact position
5 g in all directions (A, B1, B2, C1, C2)
A... and AF... Contactors
Technical Data
Technical Data
Technical Data
>> Motor Rated Powers and Currents ....... page 0/0 >> Certification - Approvals ........................ section 7 >> Mounting Positions ............................... page 2/73
>> Motor Protection .................................... section 5 >> Conditions for Use ................................ page 2/73 >> Dimensions ............................................. section 9
2/68 Low Voltage Products
1SBC100122C0202
Magnet System Characteristics for A... Contactors
Contactor types: A... 9 12 16 26 30 40 45 50 63 75 95 110
Rated control circuit voltage Uc
– at 50 Hz V24 ... 690
– at 60 Hz V24 ... 690
Coil operating limits acc. to IEC 60947-4-1 0.85 ... 1.1 x Uc (at θ < 55 °C) 0.85 ... 1.1 x Uc
(at θ < 70 °C)
Please also refer to "Conditions for Use"
Drop-out voltage in % of Ucapprox. 40 ... 65 %
Coil consumption
Average pull-in value 50 Hz VA 70 120 180 350
60 Hz VA 80 140 210 450
50/60 Hz(1) VA/VA 74/70 125/120 190/180 410/365
Average holding value 50 Hz VA/W 8/2 12/3 18/5.5 22/6.5
60 Hz VA/W 8/2 12/3 18/5.5 26/8
50/60 Hz(1) VA/W 8/2 12/3 18/5.5 27/7.5
Operating time
between coil energization and:
– N.O. contact closing ms 10 ... 26 8 ... 21 8 ... 27 10 ... 25
– N.C. contact opening ms 7 ... 21 6 ... 18 7 ... 22 7 ... 22
between coil de-energization and:
– N.O. contact opening ms 4 ... 11 4 ... 11 4 ... 11 7 ... 15
– N.C. contact closing ms 9 ... 16 7 ... 14 7 ... 14 10 ... 18
(1) 50/60 Hz coils: see "Coil Voltage Code Table".
Magnet System Characteristics for AF... Contactors
Contactor types: AF... 45 50 63 75 95 110
Rated control circuit voltage Uc
– at 50 Hz V48 ... 250 48 ... 250
– at 60 Hz V48 ... 250 48 ... 250
– d.c. V20 ... 250 20 ... 250
Coil operating limits acc. to IEC 60947-4-1 0.85 x Uc min. ... 1.1 x Uc max. (at θ < 70 °C)
Please also refer to "Conditions for Use"
Drop-out voltage in % of Uc min. 55 %
Coil consumption
Average pull-in value 50 Hz VA 210 350
60 Hz VA 210 350
d.c. W190 400
Average holding value 50 Hz VA/W 7/2.8 7/3.5
60 Hz VA/W 7/2.8 7/3.5
d.c. W2.8 2
Operating time
between coil energization and:
– N.O. contact closing ms 30 ... 100 30 ... 80
– N.C. contact opening ms 27 ... 95 27 ... 77
between coil de-energization and:
– N.O. contact opening ms 30 ... 110 55 ... 125
– N.C. contact closing ms 35 ... 115 60 ... 130
A... and AF... Contactors
Technical Data
>> Coil Voltage Code Table ......................... page 0/1 >> Conditions for Use ................................ page 2/72 >> Terminal Marking and Positioning ........ section 8
2
Low Voltage Products 2/69
1SBC100122C0202
Magnet System Characteristics for A... Contactors
Contactor types: A... 145 185 210 260 300
Rated control circuit voltage Uc
– at 50 Hz V24 ... 690
– at 60 Hz V24 ... 690
Coil operating limits acc. to IEC 60947-4-1 0.85 ... 1.1 x Uc (at θ < 70 °C)
Please also refer to "Conditions for Use"
Drop-out voltage in % of Ucapprox. 40 ... 65 %
Coil consumption
Average pull-in value 50 Hz VA 550 1350
60 Hz VA 600 1550
50/60 Hz(1) VA/VA 700/650 1700/1550
Average holding value 50 Hz VA/W 35/11 60/16
60 Hz VA/W 40/12 65/19
50/60 Hz(1) VA/W 44/13 80/21
Operating time
between coil energization and:
– N.O . contact closing ms 13 ... 27 17 ... 35
– N.C. contact opening ms 8 ... 22 12 ... 30
between coil de-energization and:
– N.O. contact opening ms 5 ... 10 7 ... 13
– N.C. contact closing ms 9 ... 13 10 ... 16
(1) 50/60 Hz coils: see "Coil Voltage Code Table".
Magnet System Characteristics for AF... Contactors
Contactor types: AF... 145 185 210 260 300 400 460 580 750 1350 1650
Rated control circuit voltage Uc
– at 50 Hz V48 ... 250 48 ... 500 100 ... 250
– at 60 Hz V48 ... 250 48 ... 500 100 ... 250
– d.c. V20... 250 24 ... 500 100 ... 250
Coil operating limits acc. to IEC 60947-4-1 0.85 ... 1.1 x Uc (at θ < 70 °C)
Please also refer to "Conditions for Use"
Drop-out voltage in % of Uc min. 55 %
Coil consumption
Average pull-in value 50 Hz VA 430 470 890 850 1900
60 Hz VA 430 470 890 850 1900
d.c. W500 520 990 950 1700
Average holding value 50 Hz VA/W 12/3.5 10/2.5 12/4 12/4.5 48/17
60 Hz VA/W 12/3.5 10/2.5 12/4 12/4.5 48/17
d.c. W22 4 4.5 16
Operating time
coil supply between A1-A2
between coil energization and:
– N.O . contact closing ms 30 ... 115 50 ... 120 50 ... 80
– N.C. contact opening ms 30 ... 115 50 ... 120 50 ... 80
between coil de-energization and:
– N.O. contact opening ms 25 ... 80 33 ... 70 35 ... 55
– N.C. contact closing ms 25 ... 80 33 ... 70 35 ... 55
control input for PLC's
between coil energization and:
– N.O . contact closing ms –––––40 ... 60 40 ... 90 40 ... 65
– N.C. contact opening ms –––––40 ... 60 40 ... 90 40 ... 65
between coil de-energization and:
– N.O. contact opening ms –––––10 ... 30 10 ... 30
– N.C. contact closing ms –––––10 ... 30 10 ... 30
A... and AF... Contactors
Technical Data
Technical Data
Technical Data
>> Coil Voltage Code Table ......................... page 0/1 >> Conditions for Use ................................ page 2/73 >> Terminal Marking and Positioning ........ section 8
2/70 Low Voltage Products
1SBC100122C0202
AL..., AE... and TAL..., TAE... Contactors
Technical Data
Magnet System Characteristics for AL... and AE... Contactors
Contactor types: AL... 9 12 16 26 30 40
AE... 45 50 63 75 95 110
Rated control circuit voltage Uc
V d.c. 12 ... 250 (24 and 48 for AL..Z version) 12 ... 250
Coil operating limits acc. to IEC 60947-4-1 0.85 ... 1.1 x Uc (at θ < 55 °C) 0.85 ... 1.1 x Uc
(at θ < 70 °C)
Please also refer to "Conditions for Use"
Drop-out voltage in % of Ucapprox. 10 ... 30 % approx. 15 ... 40 %
Coil consumption - Average values
– pull-in value W3 (2.4 for AL..Z version) 3.5 200 400
– holding value W3 (2.4 for AL..Z version) 3.5 4 2.4
Coil time constant
– open L/R ms 28 38 3 6
– closed L/R ms 74 62 15 30 ... 40
Operating time
between coil energization and:
– N.O. contact closing ms 50 ... 100 55 ... 110 13 ... 30 15 ... 25
– N.C. contact opening ms 20 ... 70 25 ... 75 10 ... 27 12 ... 22
between coil de-energization and:
– N.O. contact opening ms 10 ... 17 (1) 12 ... 18 (1) 5 ... 15 (1) 15 ... 20 (1)
– N.C. contact closing ms 16 ... 27 (1) 18 ... 28 (1) 8 ... 18 (1) 18 ... 23 (1)
(1)The use of surge suppressors increases the opening time with a factor of 1.1 to 1.5 for a varistor suppressor and a factor of 1.5 to 3 for a diode suppressor.
Magnet System Characteristics for TAL... and TAE... Contactors
Contactor types: TAL... 9 12 16 26 30 40
TAE... 45 50 75 95 110
Rated control circuit voltage Uc
V d.c. 17 ... 264
Coil operating limits Uc min. ... Uc max. (at θ < 55 °C)
Please also refer to "Conditions for Use"
Drop-out voltage in % of Uc max. approx. 9 ... 25 % approx. 10 ... 35 %
Coil consumption
values for Uc min. ... Uc max.
– pull-in value W2.5 ... 8.5 2.7 ... 9 120 ... 250 250 ... 700
– holding value W2.5 ... 8.5 2.7 ... 9 1.7 ... 6.5 2 ... 7
Coil time constant
– open L/R ms 28 38 3 6
– closed L/R ms 74 62 15 40
Operating time
between coil energization and:
– N.O. contact closing ms 50 ... 100 55 ... 110 13 ... 30 15 ... 25
– N.C. contact opening ms 20 ... 70 25 ... 75 10 ... 27 12 ... 22
between coil de-energization and:
– N.O. contact opening ms 10 ... 17 (1) 12 ... 18 (1) 5 ... 15 (1) 15 ... 20 (1)
– N.C. contact closing ms 16 ... 27 (1) 18 ... 28 (1) 8 ... 18 (1) 18 ... 23 (1)
(1) The use of surge suppressors increases the opening time with a factor of 1.1 to 1.5 for a varistor suppressor and a factor of 1.5 to 3 for a diode suppressor.
>> Coil Voltage Code Table ......................... page 0/1 >> Conditions for Use ................................ page 2/72 >> Terminal Marking and Positioning ........ section 8
2
Low Voltage Products 2/71
1SBC100122C0202
Built-in Auxiliary Contacts - Other auxiliary contacts see "Accessories"
Utilization characteristics acc. to IEC
Contactor types: A..., AL..., TAL... 9 12 16 26 30 40
AL..Z... 9 12 16
Rated operational voltage Ue
max.
V690
Conventional free air thermal
current Ith - θ < 40 °CA16
Rated frequency limits Hz 25 ... 400
Rated operational current Ie / AC-15
according to IEC 60947-5-1
24-127 V 50/60 Hz A6
220-240 V 50/60 Hz A4
380-440 V 50/60 Hz A3
500 V 50/60 Hz A2
690 V 50/60 Hz A2
Rated operational current Ie / DC-13
according to IEC 60947-5-1
24 V d.c. A6(144 W)
48 V d.c. A2.8 (134 W)
72 V d.c. A2(144 W)
110 V d.c. A1.1 (121 W)
125 V d.c. A1.1 (138 W)
220 V d.c. A0.55 (121 W)
250 V d.c. A0.55 (138 W)
Making capacity
acc. to IEC 60947-5-1 10 x Ie / AC-15
Breaking capacity
acc. to IEC 60947-5-1 10 x Ie / AC-15
Short-circuit protection
gG type fuse A10
Rated short-time withstand current I
cw
for 1.0 s A100
for 0.1 s A140
Minimum switching capacity V / mA 17 / 5 (1)
Non-overlapping time between
N.O. and N.C. contacts ms > 2
Heat dissipation per pole at 6 A W 0.10
(1) For AL..., AL..Z..., TAL... contactors, failure rate < 10-7 according to IEC 60947-5-4.
Utilization characteristics acc. to UL/CSA
Contactor types: A..., AL..., TAL... 9 12 16 26 30 40
AL..Z... 9 12 16
Max. rated voltage V 600
Pilot duty A 600, P 300
A..., AL..., AL..Z... and TAL... Contactors
Technical Data
>> Electrical Durability Curves ................... section 4 >> Auxiliary Contacts for Safety Circuits .... page 2/63 >> Terminal Marking and Positioning ........ section 8
Technical Data
Technical Data
2/72 Low Voltage Products
1SBC100122C0202
Position 1
Position 3
Position 4
Position 2
E0200D6
Position 5
Position 1 ± 30°
+30°
-30°
Position 6
ABB
ABB
ABB
ABB
Mounting Characteristics
Contactor types: A... 9 12 16 26 30 40 45 50 63 75 95 110
AL..., TAL... 9 12 16 26 30 40
AE..., TAE..., AF... 45 50 63 75 95 110
Mounting positions see "Conditions for use"
Mounting distances The contactors can be assembled side by side - Except for TAL... contactors: see "Dimensions"
Fixing
on rail 35 x 7.5 mm 35 x 15 mm
according to IEC 60715, EN 60715 35 x 15 mm 75 x 25 mm 75 x 25 mm
by screws (not supplied) 2 x M4 2 x M6
Conditions for Use
Sustainable utilization conditions for contactors involving at the same time the Mounting position, Ambient temperature and Control voltage operating
limits are summarized in the table below.
Contactor types: A..., 9 12 16 26 30 40 45 50 63 75 95 110
AL... 9 12 16 26 30 40
AE... 45 50 63 75 95 110
Control voltage / Ambient temperature
Mounting positions < 55 °C0.85 ... 1.1 x Uc
1, 2, 3, 4, 5 55 ... 70 °CU
c0.85 ... 1.1 x Uc
Mounting pos. 1 + 30°
< 55 °C0.85 ... 1.1 x Uc
(unauthorized f or AL..Z... types)
55 ... 70 °CU
c0.85 ... 1.1 x Uc
Mounting pos. 6 < 55 °C0.95 ... 1.1 x Uc
(Position 6 unauthorized for
> 55 °Cunauthorized
AL... and AL..Z... types)
Contactor types: TAL... 9 12 16 26 30 40
TAE... 45 50 75 95 110
Control voltage / Ambient temperature
Mounting positions < 55 °CU
c min. ... Uc max.
1, 1 + 30°, 2, 3, 4, 5 > 55 °Cunauthorized
Mounting pos. 6 unauthorized
Contactor types: AF... 45 50 63 75 95 110
Control voltage / Ambient temperature
Mounting positions < 70 °C–––––0.85 x Uc min. ... 1.1 x Uc max.
1, 1 + 30°, 2, 3, 4, 5
Mounting pos. 6 –––––unauthorized
Notes for 4-pole contactors
Whatever the coil voltage: Pos. 5 unauthorized for AL 9-22-00, AL 16-22-00, AL 26-22-00, TAL 9-22-00, TAL 16-22-00, TAL 26-22-00, A 45-22-00, AE 45-22-00, AF 45-22-00, A 75-22-00, AE 75-22-00, AF 75-22-00 contactors.
For 60 Hz coil voltage: (only for devices fitted with CA 5-.. and CAL 5-11 auxiliary contacts or TP timer)
–A 45-40-00, A 50-40-00 and A 75-40-00 contactors
Mounting positions 1 to 5 and ambient temperature < 55 °C: tolerance reduced to 0.9 ... 1.1 Uc (instead of 0.85 ... 1.1 Uc) for coil voltage codes 7 and 8 .
–A 45-22-00 and A 75-22-00 contactors
Mounting positions 1 to 4 and ambient temperature < 55 °C: tolerance reduced to 0.9 ... 1.1 Uc (instead of 0.85 ... 1.1 Uc) for coil voltage codes 7 and 8 .
For mounting position 6 or ambient temperature of 55 to 70 °C the information given on this page remains applicable.
Mounting Positions
(see the above table for authorized positions)
A... and AF... Contactors
AL..., AE... and TAL..., TAE... Contactors
Technical Data
2
Low Voltage Products 2/73
1SBC100122C0202
ABB
ABB
ABB
ABB
E1853D1
+30°
-30°
Position 1
Position 3
Position 4
Position 2
Position 5
Position 1 ± 30°
Position 6
Mounting Characteristics
Contactor types: A... 145 185 210 260 300
AF... 145 185 210 260 300 400 460 580 750 1350 1650
Mounting positions see "Conditions for use"
Mounting distances No mounting distance required between contactors
Fixing
on rail
according to IEC 60715, EN 60715
by screws (not supplied) 4 x M5 4 x M6 4 x M8
Conditions for Use
Sustainable utilization conditions for contactors involving at the same time the Mounting position, Ambient temperature and Control voltage operating
limits are summarized in the table below.
Contactor types: A... 145 185 210 260 300
Control voltage / Ambient temperature
Mounting positions < 70 °C0.85 ... 1.1 x Uc–– ––
1,
1 + 30°
, 2, 3, 4, 5
Mounting position 6 unauthorized
Contactor types: AF... 145 185 210 260 300 400 460 580 750 1350 1650
Control voltage / Ambient temperature
Mounting positions < 70 °C0.85 x Uc min. ... 1.1 x Uc max.
1,
1 + 30°
, 2, 3, 4, 5
Mounting position 6 unauthorized
Mounting Positions (see the above table for authorized positions)
A... and AF... Contactors
Technical Data
Technical Data
Technical Data
>> Dimensions ................................................................................................................................................................................................................................................................ section 9
2/74 Low Voltage Products
1SBC100122C0202
}
L
l
L
l
A... and AF... Contactors
AL..., AE... and TAL..., TAE... Contactors
Technical Data
Connecting Characteristics
Contactor types: A... 9 12 16 26 30 40 45 50 63 75 95 110
AL..., TAL... 9 12 16 26 30 40
AE..., TAE..., AF... 45 50 63 75 95 110
Main terminals
with cable clamp with double with single connector with single
connector (13 x 10 mm) connector
2 x (5.6 x 6.5 mm)
(14 x 14 mm)
Connecting capacity (min. ... max.)
Main conductors (poles)
Rigid:solid (< 4 mm2)1 x mm21 ... 4
1.5 ... 6
2.5 ... 16 6 ... 50 10 ... 95
stranded (> 6 mm
2
)
2 x mm21 ... 4
1.5 ... 6
2.5 ... 16 6 ... 25 6 ... 35
Rigid with connector
single for Cu cable mm2––––––– ––
single for Al/Cu cable mm2––––––– ––
double for Al/Cu cable mm2––––––– ––
Flexible
with cable end 1 x mm20.75 ... 2.5
0.75 ... 4
2.5 ... 10 6 ... 35 10 ... 70
2 x mm20.75 ... 2.5
0.75 ... 4
2.5 ... 10 6 ... 16 6 ... 35
Bars or lugs L mm <7.7 10 –––– –– 30 (2)
l mm > 3.7 4.2 –––– –– 6
Capacity acc. to UL/CSA AWG 10-18 8-12 4-8 1-8 6-2/0
Auxiliary conductors
(built-in auxiliary terminals + coil terminals)
Rigid solid 1 x mm21 ... 4 0.75 ... 2.5
2 x mm21 ... 4 0.75 ... 2.5
Flexible with cable end
1 x mm20.75 ... 2.5 1 ... 2.5 0.75 ... 2.5
2 x mm20.75 ... 2.5
Lugs L mm <7.7 (1) 8
l mm > 3.7 (1) 3.7
Capacity acc. to UL/CSA AWG 18-14
Degree of protection acc. to IEC 60947-1 / Protection against direct contact in acc. with EN 50274
EN 60947-1 and IEC 60529 / EN 60529
– Main terminals IP 20 IP 10
– Coil terminals IP 20
– Built-in auxiliary terminals IP 20
Screw terminals (delivered in open position, screws of unused terminals must be tightened)
Main terminals (+,-) pozidriv 2 screws
hexagon socket
M3.5 M4 M5 M6 M8 (s = 4 mm)
Coil terminals M3.5 (+,-) pozidriv 2 screws with cable clamp
Built-in auxiliary terminals (+,-) pozidriv 2 screws with cable clamp
M3.5 M4 M3.5
Tightening torque
Main pole terminals
– recommended Nm / lb.in 1.00 / 9
1.7 / 15
2.30 / 20 4.00 / 35 6.00 / 53
– max. Nm 1.20 2.20 2.60 4.50 6.50
Coil terminals
– recommended Nm / lb.in 1.00 / 9
– max. Nm 1.20
Built-in auxiliary terminals
– recommended Nm / lb.in 1.00 / 9
1.7 / 15
1.00 / 9
– max. Nm 1.20 2.20 1.20
(1) L < 8 and l > 3.7 for coil terminals - L < 10 and l > 4.2 for built-in auxiliary terminals.
(2) With LW 110 enlargement piece: see "Accessories".
>> Terminal Marking and Positioning ............................................................. section 8 >> Accessories ................................................................................................. section 4
2
Low Voltage Products 2/75
1SBC100122C0202
E1858D
17.5
ø 8.5
5
E1859D
20
ø 10.2
5
E1860D
25
ø 6.5
22.5
ø 10.5
6
E1861D
40
ø 6.5
22.5
ø 12.5
6
L
l
L
ø
E2657D
80
ø 13
10 27
40
17
30
10
Connecting Characteristics
Contactor types: A... 145 185 210 260 300
AF... 145 185 210 260 300 400 460 580 750 1350 1650
Main terminals
Flat type
Connecting capacity (min. ... max.)
Main conductors (poles)
Rigid: 1 x mm2
–––– ––
2 x mm2
–––– ––
Rigid with connector
single for Cu cable mm26 ... 185 16 ... 240 240 300
single for Al/Cu cable mm225 ... 150 120 ... 240 240 300
double for Al/Cu cable
mm2–2 x 95 ... 120 2 x 240 3 x 185
Flexible
1 x mm2–––– ––
2 x mm2–––– ––
Bars or lugs L mm <24 32 4752 100
Ø mm > 8 10 10 12 12
Capacity acc. to UL/CSA AWG 6-250 MCM (2) 4-500 MCM 2//250-500 MCM 3// 2/0-500 MCM 1/0-750 MCM
Auxiliary conductors
(coil terminals)
Rigid solid 1 x mm21 ... 4
2 x mm21 ... 4
Flexible with cable end
1 x mm20.75 ... 2.5
2 x mm20.75 ... 2.5
Lugs L mm <8
l mm > 3.7
Capacity acc. to UL/CSA AWG 18-14
Degree of protection acc. to IEC 60947-1 / Protection against direct contact in acc. with EN 50274
EN 60947-1 and IEC 60529 / EN 60529
– Main terminals IP 00
– Coil terminals IP 20
– Built-in auxiliary terminals
Screw terminals
Main terminals Screws and bolts
M8 M10 M10 M12 M12
Coil terminals (delivered in open position) M3.5 (+,-) pozidriv 2 screws with cable clamp
Built-in auxiliary terminals
–––– ––
Tightening torque
Main pole terminals
– recommended Nm / lb.in 18 / 160 28 / 240 40 / 354 45 / 443 45 / 443
– max. Nm 20 30 44 49 49
Coil terminals
– recommended Nm / lb.in 1.00 / 9
– max. Nm 1.20
Built-in auxiliary terminals
– recommended Nm / lb.in –––– ––
– max. Nm –––– ––
A... and AF... Contactors
Technical Data
Technical Data
Technical Data
>> Terminal Marking and Positioning ............................................................. section 8 >> Accessories ................................................................................................. section 4
2/76 Low Voltage Products
1SBC100122C0202
M
3
M
3
Main Pole - Utilization Characteristics acc. to IEC
Contactor types: EK... 110 150 175 210 370 550 1000
Rated operational voltage Ue max. V1000
Rated frequency limits Hz 25 ... 400
Conventional free-air thermal current I
th
acc. to IEC 60947-4-1,
open contactors θ < 40 °CA200 250 300 350 550 800 1000
with conductor cross-sectional area mm295 150 185 240 2 x 185 2 x 240 2 x 300
Rated operational current Ie / AC-1
for air temperature close to contactor
θ < 40 °CA200 250 300 350 550 800 1000
U
e
max. 1000 V - 50/60 Hz
θ < 55 °CA180 230 270 310 470 650 800
θ < 70 °CA155 200 215 250 400 575 720
with conductor cross-sectional area mm295 150 185 240 2 x 185 2 x 240 2 x 300
Utilization category AC-3
for air temperature close to contactor < 55 °C
Max. rated operational current I
e
AC-3 (1)
220-230-240 V A120 145 210 400 550
3-phase motors 380-400 V A120 145 210 400 550
415 V A120 145 210 400 550
440 V A120 145 210 370 550
500 V A120 145 210 370 550
690 V A120 120 210 370 550
1000 V A64 80 113 155 175
Rated operational power AC-3
(1)
1500 r.p.m. 50 Hz 220-230-240 V kW 30 45 59 110 160
1800 r.p.m. 60 Hz 380-400 V kW 55 75 110 200 280
3-phase motors 415 V kW 55 75 110 220 315
440 V kW 59 75 110 220 315
500 V kW 75 90 132 250 400
690 V kW 110 110 160 355 500
1000 V kW 90 110 160 220 250
Rated making capacity AC-3
according to IEC 60947-4-1 10 x Ie AC-3
Rated breaking capacity AC-3
according to IEC 60947-4-1 8 x Ie AC-3
Short-circuit protection for contactors
without thermal O/L relay - Motor protection excluded (2)
Ue < 500 V a.c. - gG type fuse A250 355 630 800 1000
Rated short-time withstand current I
cw
at 40 °C ambient temp., in free air,
from a cold state 1 s A1700 1800 2300 5500 6800
10 s A900 1200 1680 5300 6400
30 s A600 700 1000 3700 4400
1 min A450 550 800 3000 3400
15 min A210 250 320 1000 1200
Maximum breaking capacity
cos ϕ = 0.45 (cos ϕ = 0.35 for Ie > 100 A)
at 440 V A1400 1500 2000 5000 5400
at 690 V A1100 1200 1700 5000 5400
Heat dissipation per pole
Ie / AC-1 W 10 13 18 40 60 80
Ie / AC-3 W 359 1525
Max. electrical switching frequency
– for AC-1 cycles/h 300 300
– for AC-3 cycles/h 300
– for AC-2, AC-4 cycles/h 150 120
Mechanical durability
– millions of operating cycles 10 5
– max. mechanical switching
frequency cycles/h 3600 3600
(1) For the corresponding kW/A or hp/A values of 1500 r.p.m., 50Hz or 1800 r.p.m., 60Hz, 3-phase motors, see "Motor Rated Operational Powers and Currents".
(2) For the protection of motor starters against short circuits, see "Coordination with Short-circuit Protection Devices"
EK... Contactors
Technical Data
{
>> Electrical Durability Curves .................. page 2/81 >> Motor Rated Powers and Currents ....... page 0/0 >> Coordination with SCPD ........................ section 5
2
Low Voltage Products 2/77
1SBC100122C0202
B2
AAB1
C2
C1
E1862D
ABB
Main Pole - Utilization Characteristics acc. to UL/CSA
Contactor types: EK... 110 150 175 210 370 550 1000
NEMA Size ––––––
General use rating
Amp-rating (1) 600 V A170 200 250 300 420 540
Short-circuit protection
Fuse rating A400 1200
Fuse type, 600 V J L
Max. electrical switching frequency
for general use cycles/h 300
(1) For the corresponding kW/A or hp/A values of 1500 r.p.m., 50Hz or 1800 r.p.m., 60Hz, 3-phase motors, see "Motor Rated Operational Powers and Currents".
General Technical Data
Contactor types: EK... 110 150 175 210 370 550 1000
Rated insulation voltage Ui
according to IEC 60947-4-1
V1000
according to UL/CSA
V600
Rated impulse withstand voltage U
imp.
kV 8
Standards Devices complying with IEC 60947-1 / 60947-4-1 and EN 60947-1 / 60947-4-1
Air temperature close to contactor see "Conditions for use", for control voltage limits and authorized mounting positions
– fitted with thermal O/L relay °C -25 to +55
– without thermal O/L relay °C -40 to +70
– for storage °C -50 to +70
Climatic withstand acc. to IEC 60068-2-30
Operating altitude m < 3000
Shock withstand
acc. IEC 60068-2-27 and EN 60068-2-27
Mounting position 1 1/2 sinusoidal shock for 15 ms: no change in contact position
Contactor in closed or open position
10 g in all directions (A, B1, B2, C1, C2)
EK... Contactors
Technical Data
Technical Data
Technical Data
>> Motor Rated Powers and Currents ....... page 0/0 >> Certification - Approvals ........................ section 7 >> Mounting Positions ............................... page 2/79
>> Motor Protection .................................... section 5 >> Conditions for Use ................................ page 2/79 >> Dimensions ............................................. section 9
2/78 Low Voltage Products
1SBC100122C0202
Magnet System Characteristics for EK... Contactors - a.c. Operated
Contactor types: EK... 110 150 175 210 370 550 1000
Rated control circuit voltage Uc
– at 50 Hz V24 ... 500 48 ... 500
– at 60 Hz V24 ... 600 110 ... 600
Coil operating limits θ < 70 °C
according to IEC 60947-4-1 0.85 ... 1.1 x Uc
Drop-out voltage in % of Ucapprox. 45 ... 65 %
(20 ... 50 % for "E" coil voltage codes)
approx. 45 ... 65 %
Coil consumption
Average pull-in value 50 Hz(1) VA 800 1100 3500
60 Hz(1) VA 900 1200 4000
50/60 Hz(2) VA/VA 500/500 630/630 3800/3400
Average holding value 50 Hz(1) VA/W 44/15 52/18 125/50
60 Hz(1) VA/W 52/18 65/22 140/60
50/60 Hz(2) VA/W 2.5/2.5 2.5/2.5 140/60
Operating time
between coil energization and:
– N.O. contact closing ms 20 ... 40(1) / 30 ... 50(2) 30 ... 60
– N.C. contact opening ms 15 ... 35(1) / 25 ... 45(2) 25 ... 55
between coil de-energization and:
– N.O. contact opening ms 7.5 ... 15(1) / 95 ... 120(2) 10 ... 20
– N.C. contact closing ms 10 ... 18(1) / 100 ... 125(2) 13 ... 23
(1) "A" coil voltage codes, see "Coil Voltage Code Table" (2) 50/60 Hz "E" coil voltage codes, see "Coil Voltage Code Table"
Magnet System Characteristics for EK... Contactors - d.c. Operated
Contactor types: EK... 110 150 175 210 370 550 1000
Rated control circuit voltage Uc
V d.c. 12 ... 220 24 ... 220
Coil operating limits θ < 70 °C
according to IEC 60947-4-1 0.85 ... 1.1 x Uc
Drop-out voltage in % of Ucapprox. 15 ... 50 %
Coil consumption - Average values
– pull-in value W500 630 1100
– holding value W2.5 2.5 20
Coil time constant
– open L/R ms 812
– closed L/R ms 50 60
Operating time
between coil energization and:
– N.O. contact closing ms 30 ... 50 60 ... 80
– N.C. contact opening ms 27 ... 47 55 ... 75
between coil de-energization and:
– N.O. contact opening ms 10 ... 35
– N.C. contact closing ms 13 ... 38
EK... Contactors
Technical Data
>> Coil Voltage Code Table ......................... page 0/1 >> Conditions for Use ................................ page 2/79 >> Terminal Marking and Positioning ........ section 8
2
Low Voltage Products 2/79
1SBC100122C0202
ABB
ABB
ABB
ABB
E1863D1
Position 1
Position 3
Position 4
Position 2
Position 5
Position 1 ± 30°
+30°
-30°
Position 6
Mounting Characteristics
Contactor types: EK... 110 150 175 210 370 550 1000
Mounting positions see "Conditions for use"
Mounting distances see "Dimension drawings" for distances required between contactors
Fixing
by screws (supplied) 4 x M6 4 x M6 (1)
(1) Damping elements are supplied
Conditions for Use
Sustainable utilization conditions for contactors involving at the same time the Mounting position, Ambient temperature and Control voltage operating
limits are summarized in the table below.
Contactor types: EK... 110 150 175 210 370 550 1000
Control voltage / Ambient temperature
Mounting positions < 70 °C0.85 ... 1.1 x Uc
1, 1 + 30°, 3, 4, 5
Mounting position 2 < 70 °Cunauthorized 0.85 ... 1.1 x Uc
Mounting position 6 unauthorized
Mounting Positions (see the above table for authorized positions)
EK... Contactors
Technical Data
Technical Data
Technical Data
>> Dimensions ................................................................................................................................................................................................................................................................ section 9
2/80 Low Voltage Products
1SBC100122C0202
E1864D
15
ø 6.6
4.5
E1866D
20
ø 11
5
E1867D
25
ø 11
6
E1868D
40
ø 11
8
E1865D
20
ø 11
4
L
l
L
ø
EK... Contactors
Technical Data
Connecting Characteristics
Contactor types: EK... 110 150 175 210 370 550 1000
Main terminals
Flat type
Connecting capacity (min. ... max.)
Main conductors (poles)
Rigid: 1 x mm2––
2 x mm2––
Rigid with connector
single for Cu cable mm225 ... 120 25 ... 185 70 ... 300
single for Al/Cu cable mm210 ... 70 35 ... 120 70 ... 300 95 ... 300
double for Al/Cu cable mm2–– 2 x 35 ... 185 2 x 95 ... 300
Flexible
1 x mm2––
2 x mm2––
Bars or lugs L mm <30 30 33 55
Ø mm > 6 10 10 10
Capacity acc. to UL/CSA AWG 8-3/0 6-250 MCM
2 x 4-500 MCM 3 x 4-500 MCM
Auxiliary conductors
(coil terminals)
Rigid solid 1 x mm20.5 ... 2.5
2 x mm20.5 ... 2.5
Flexible with cable end
1 x mm20.5 ... 2.5
2 x mm20.5 ... 2.5
Lugs L mm <8
l mm > 3.7
Capacity acc. to UL/CSA AWG 18-14
Degree of protection acc. to IEC 60947-1 / Protection against direct contact in acc. with EN 50274
EN 60947-1 and IEC 60529 / EN 60529
– Main terminals IP 00
– Coil terminals IP 20
Screw terminals
Main terminals Screws and bolts
M6 M10
Coil terminals (delivered in open position) M3.5 (+,-) pozidriv 2 screws with cable clamp
Tightening torque
Main pole terminals
– recommended Nm / lb.in 5 / 44 18 / 160
– max. Nm 622
Coil terminals
– recommended Nm / lb.in 1.00 / 9
– max. Nm 1.20
>> Terminal Marking and Positioning ............................................................. section 8 >> Accessories ................................................................................................. section 4
2
Low Voltage Products 2/81
1SBC100122C0202
Contactor Electrical Durability
and Utilization Categories
General
Utilization categories determine the current making and breaking conditions relating to the characteristics of the loads to be controlled by the
contactors. International standard IEC 60947-4-1 and European standard EN 60947-4-1 are the standards to be referred to.
If Ic is the current to be broken by the contactor and Ie the rated operational current normally drawn by the load, then:
Categories AC-1 and AC-3: Ic = Ie
Category AC-2: Ic = 2.5 x Ie
Category AC-4: Ic = 6 x Ie
Generally speaking Ic = m x Ie where m is a multiple of the load operational current.
On next pages, the curves corresponding to categories AC-1, AC-2, AC-3 and AC-4 represent the electrical durability variation of standard contactors
in relation to the breaking current Ic .
Electrical durability is expressed in millions of operating cycles.
For the AC-2 applications, the Ie values are given in the "stator contactor table" (see "Control of Three-Phase Slip-ring Motors").
Curve Utilization Mode
Electrical durability forecast and contactor selection for categories AC-1, AC-2, AC-3 or AC-4
Note the characteristics of the load to be controlled:
Operational voltage ...........................................................................Ue
Current normally drawn ..................................................................... Ie(Ue / Ie / kW relation for motors, see "Motor Rated Operational Powers and Currents").
Utilization category ............................................................................ AC-1, AC-2, AC-3 or AC-4
Breaking current ................................................................................ Ic = Ie for AC-1 and for AC-3 ; Ic = 2.5 x Ie for AC-2 ; Ic = 6 x Ie for AC-4
Define the number of operating cycles N required.
On the diagram corresponding to the operational category, select the contactor with the curve immediately above the intersection point (Ic ; N).
Electrical durability forecast and contactor selection for mixed duty motor control: AC-3 (Ic = Ie) type switching off while "motor running"
and, occasionally, AC-4 (Ic = 6 x Ie) type switching off while "motor accelerating".
Note the characteristics of the motor to be controlled:
Operational voltage ...........................................................................Ue
Current normally drawn while "motor running" .................................. Ie(Ue / Ie / kW relation for motors, see "Motor Rated Operational Powers and Currents").
Breaking current for AC-3 .................................................................. Ic = Ie
Breaking current for AC-4 while "motor accelerating"........................ Ic = 6 x Ie
Percentage of AC-4 operating cycles ................................................ K (on the basis of the total number of operating cycles)
Define the total number of operating cycles N required.
Note the smallest contactor rating compatible for AC-3 (Ue / Ie) on Main Pole Utilization Characteristic table (see "Technical Data").
For the selected contactor make a note of the following in relation to the voltage using diagram AC-3 in next pages:
The number of operating cycles Afor Ic = Ie(AC-3)
The number of operating cycles Bfor Ic = 6 x Ie(AC-4)
Calculate the estimated number of cycles N' (N' is always below A)
A
N' = 1 + 0.01 K (A/B - 1)
If N' is too low in relation to the target N, calculate the estimated number of cycles for a higher contactor rating.
Case of uninterrupted duty.
Among the different utilization categories, the uninterrupted duty implies the following remark. The combinated effect of environmental conditions
and the proper temperature of the product may require some disposals. As a matter of fact, for this duty, the use duration prevails over the number
of operating cycles.
For long term service, some verifications of preventing maintenance are needed to check the functionality of the concerned product (consult us).
Over a duration of five years, in these conditions the contactor might present high internal resistance. We recommend to change the contactor or
change the contacts.
Technical Data
Technical Data
>> Motor Rated Operational Powers and Currents ....................................... page 0/0 >> Control of Three-Phase Slip-ring Motors ................................................ page 2/52
>> Technical Data ............................................................................................ page 2/64
2/82 Low Voltage Products
1SBC100122C0202
E1666D
13579
13579
1
3
5
7
9
1
3
5
7
9
13579
13579
1
3
5
7
9
10
1
0.1
0.2
0.3
0.5
3
5
10 100 100023 5 2030 50 200 300 500
A 145
A 9A 12
A 16
A 26
A 30
A 40
A 45
A 50
A 63
A 75
A 95
A 110
A 185
A 210
A 300
A 260
AF 400
AF 460
AF 580
AF 750
2
24
A... Contactors
Electrical Durability
Electrical Durability for AC-1 Utilization Category - Ue < 690 V. Ambient Temperature < 55 °C
Switching non-inductive or slightly inductive loads. The breaking current Ic for AC-1 is equal to the rated operational current of the load.
Maximum electrical switching frequency: see "Technical Data".
Millions of
operating
cycles
Breaking current Ic (A)
Example:
Ic / AC-1 = 24 A – Electrical durability required = 2 million operating cycles.
Using the AC-1 curves above select the A 30 contactor at intersection " " (24 A / 2 million operating cycles).
The curves provided for the A 45 ... A 300 contactors can be used for the AE, TAE and AF equivalent types
AF 1350, AF 1650:
The electrical durability
at the rated current is
50000 operating cycles.
2
Low Voltage Products 2/83
1SBC100122C0202
E1667D
10
1
10 100 100023 5 2030 50 200 300 500
0.2
0.3
0.5
2
3
5
13579
1
3
5
7
9
1
3
5
7
9
13579 13579
13579 13579
A 9
A 12
A 16
A 26
A 30
A 40
A 50
A 63
A 75
A 95
A 110
A 145
A 185
A 210
A 260
A300
AF 400
AF 460
AF 580
AF 750
1.5
79
13579
1
3
5
7
9
1
3
5
7
9
13579 13579
13579
13579
E1670D
10
1
10 100 100023 5 2030 50 200 300 500
0.2
0.3
0.5
2
3
5
A 9
A 12
A 16
A 26
A 30
A 40
A 50
A 63
A 75
A 95
A 110
A 145
AF 400
AF 460
AF 580
AF 750
A 185
A 210
A 300
A 260
A... Contactors
Electrical Durability
Switching cage motors: starting and switching off running motors. The breaking current Ic for AC-3 is equal to the rated operational current Ie
(Ie = motor full load current). Maximum electrical switching frequency: see "Technical Data".
Electrical Durability for AC-3 Utilization Category - Ue < 440 V. Ambient Temperature < 55 °C
Millions of
operating
cycles
Breaking current Ic (A)
Electrical Durability for AC-3 Utilization Category - 440 V < Ue < 690 V. Ambient Temperature < 55 °C
Millions of
operating
cycles
Breaking current Ic (A)
Example:
Motor power 40 kW for AC-3 - Ue = 400 V and Ie = 79 A utilization – Electrical durability required = 1.5 million operating cycles.
For AC-3: Ic = Ie. Select the A 110 contactor at intersection " " (79 A / 1.5 million operating cycles) on the curves (AC-3 - Ue < 440 V).
Technical Data
Technical Data
AF 1350, AF 1650:
The electrical durability
at the rated current is
50000 operating cycles.
AF 1350, AF 1650:
The electrical durability
at the rated current is
50000 operating cycles.
The curves provided for the A 50 ... A 300 contactors can be used for the AE, TAE and AF equivalent types
The curves provided for the A 50 ... A 300 contactors can be used for the AE, TAE and AF equivalent types
2/84 Low Voltage Products
1SBC100122C0202
E1668D
300010001001023 5203050 200 300 500 2000 5000
10
1
0.1
0.005
0.01
0.02
0.03
0.05
0.3
0.5
2
3
5
13579
13579
13579
13579
13579
13579
1
3
5
7
9
1
3
5
7
9
1
3
5
7
9
1
3
5
7
9
1
3
5
7
9
1
3
5
7
9
A 9A 12
A 16
A 26
A 30
A 40
A 50
A 63
A 75
A 95
A 110
A 260
A 300
A 145
A 185
A 210
0.2
510
A 9A 12
A 16
A 26
A 30
A 40
A 50
A 63
A 75
A 95
A 110
A 260
A 300
A 145
AF 400
AF 460
AF 580
AF 750
AF 1350
AF 1650
A 185
A 210
0.2
510
A... Contactors
Electrical Durability
Electrical Durability for AC-2 or AC-4 Utilization Category - Ue < 440 V. Ambient Temperature < 55 °C
Maximum electrical switching frequency: see "Technical Data".
Switching cage motors: starting, reverse operation and step-by-step operation. The breaking current Ic is equal to 2.5 x Ie for AC-2 and 6 x Ie for
AC-4, keeping in mind that Ie is the motor rated operational current (Ie = motor full-load current).
Millions of
operating
cycles
Breaking current Ic (A)
Example:
Motor power 45 kW for AC-4 - Ue = 400 V and Ie = 85 A utilization – Electrical durability required = 0.2 million operating cycles.
For AC-4: Ic = 6 x Ie = 510 A - Select the A 260 contactor at intersection " " (510 A / 0.2 million operating cycles) on the curves (AC-4 - Ue < 440 V).
The curves provided for the A 50 ... A 300 contactors can be used for the AE, TAE and AF equivalent types
2
Low Voltage Products 2/85
1SBC100122C0202
E1669D
13579
13579
13579
13579
13579
13579
10
1
0.1
0.005
0.01
0.02
0.03
0.05
0.2
0.3
0.5
2
3
5
500010001001023 5203050 200 300 500 2000 3000
1
3
5
7
9
1
3
5
7
9
1
3
5
7
9
1
3
5
7
9
1
3
5
7
9
1
3
5
7
9
427
A 9
A 12
A 16
A 26
A 30
A 40
A 50
A 63
A 75
A 95
A 110
A 145
A 185
A 210
A 260
A 300
AF 400
AF 460
AF 580
AF 750
0.04
A... Contactors
Electrical Durability
Electrical Durability for AC-2 or AC-4 Utilization Category - 440 V < Ue < 690 V. Ambient Temperature < 55 °C
Maximum electrical switching frequency: see "Technical Data".
Switching cage motors: starting, reverse operation and step-by-step operation. The breaking current Ic is equal to 2.5 x Ie for AC-2 and 6 x Ie for
AC-4, keeping in mind that Ie is the motor rated operational current (Ie = motor full-load current).
Millions of
operating
cycles
Breaking current Ic (A)
Example:
Motor power 59 kW for AC-4 - Ue = 600 V and Ie = 71.1 A utilization – Electrical durability required = 0.04 million operating cycles.
For AC-4: Ic = 6 x Ie = 426.6 A - Select the A 145 contactor at intersection " " (427 A / 0.04 million operating cycles) on the curves
(AC-4 - 440 V < Ue < 690 V).
Technical Data
Technical Data
The curves provided for the A 50 ... A 300 contactors can be used for the AE, TAE and AF equivalent types
2/86 Low Voltage Products
1SBC100122C0202
E2386D
1
3
5
7
9
1
3
5
7
9
13579 13579
13579
13579
13579
3
10
1
10 100 100023 5
20
30 50 200 300 500
0.3
0.5
2
5
AL 9
AL 16
AL 12
AL 26
AL 30
AL 40
2.3
18.3
E2385D
13579
1
3
5
7
9
1
3
5
7
9
1
3
5
7
9
13579
1
0.2
0.3
0.5
3
2
5
10 100 100023 5 2030 50 200 300 500
AL 9
AL 12
AL 16
AL 26
AL 30
AL 40
0.56
35
AL.. Contactors
Electrical Durability
Electrical Durability for AC-1 Utilization Category Ue < 690 V. Ambient Temperature < 55 °C
Switching non-inductive or slightly inductive loads. The breaking current Ic for AC-1 is equal to the rated operational current of the load.
Maximum electrical switching frequency: see "Technical Data".
Millions of
operating
cycles
Breaking current Ic (A)
Example:
Ic / AC-1 = 35 A – Electrical durability required = 560 000 operating cycles.
Using the AC-1 curves above select the AL 26 contactor at intersection " " (35 A / 560 000 operating cycles).
Electrical Durability for AC-3 Utilization Category - Ue < 500 V. Ambient Temperature < 55 °C
Switching cage motors: starting and switching off running motors. The breaking current Ic for AC-3 is equal to the rated operational current Ie
(Ie = motor full load current). Maximum electrical switching frequency: see "Technical Data".
Millions of
operating
cycles
Breaking current Ic (A)
Example:
Motor power 9 kW for AC-3 - Ue = 400 V and Ie = 18.3 A utilization – Electrical durability required = 2.3 million operating cycles.
For AC-3: Ic = Ie. Select the AL 26 contactor at intersection " " (18.3 A / 2.3 million operating cycles) on the curves (AC-3 - Ue < 500 V).
The curves provided for the AL... contactors
can be used for the AL..Z.. and TAL... contactors
The curves provided for the AL... contactors
can be used for the AL..Z.. and TAL... contactors
2
Low Voltage Products 2/87
1SBC100122C0202
E1671D
13579
13579
1
3
5
7
9
1
3
5
7
9
1
3
5
7
9
13579
13579
10
1
0.1
0.2
0.3
0.5
3
5
10 100 100023 5 2030 50 200 300 500
EK 1000
EK 110
EK 150
EK 175
EK 210
EK 370
EK 550
2
240
EK... Contactors
Electrical Durability
Electrical Durability for AC-1 Utilization Category. Ambient Temperature < 55 °C
Switching non-inductive or slightly inductive loads. The breaking current Ic for AC-1 is equal to the rated operational current of the load.
Maximum electrical switching frequency: see "Technical Data".
Millions of
operating
cycles
Breaking current Ic (A)
Example:
Ic / AC-1 = 240 A – Electrical durability required = 2 million operating cycles.
Using the AC-1 curves above select the EK 370 contactor at intersection " " (240 A / 2 million operating cycles).
Technical Data
Technical Data
2/88 Low Voltage Products
1SBC100122C0202
A 50-30-00
1SBC5 8075 2F0301
1SFC101031F0201
AF 460-30-11
Influence of the Length of Conductors
used in Contactor Control Circuit
Permissible single length for the control circuit conductors on contactor closing:
Depending on the coil pull-in power consumption on the supply voltage and on the control circuit conductor cross-sectional area.
Example:
A 9 contactor
Coil voltage: 230 V 50 Hz, contactor coil pull-in power consumption: 70 VA,
control circuit conductor cross-sectional area: Cu 1.5 mm2.
Max. permissible length: 2000 m.
Under certain conditions the excessive length of the control circuit conductors may prevent the contactor from
carrying out closing and opening orders.
no closing: due to excessive voltage drop (in a.c. or d.c.).
no opening: due to excessive capacitance (in a.c.).
Contactor Closing (contactor with a.c. or d.c. operated coil)
The voltage drop is due to the pull-in current (pull-in power) and to the resistance of the control circuit
conductors.
The table and graph below can be used to determine the single length of line feeders (distance between the
control device and the contactor coil) in relation to:
the coil pull-in consumption.
the supply voltage.
the connecting wire cross-sectional area.
The graph has been drawn for a max. line voltage drop of 5 %.
Coil pull-in consumption (average value)
Contactors a.c. control circuit Contactors d.c. control circuit
50 Hz
A 9, 12, 16 70 VA AL 9Z, 12Z, 16Z 2.4 W
A 26, 30, 40 120 VA AL 9, 12, 16 3 W
A 45, 50, 63, 75 180 VA AL 26, 30, 40 3.5 W
A 95, 110 450 VA AE 45, 50, 63, 75 200 W
A 145, 185 700 VA AE 95, 110 400 W
A 210, 260, 300 1700 VA
AF 45, 50, 63, 75 210 VA AF 45, 50, 63, 75 190 W
AF 95, 110 350 VA AF 95, 110 400 W
AF 145,185 430 VA AF 145,185 500 W
AF 210, 260, 300 470 VA AF 210, 260, 300 520 W
AF 400, 460 890 VA AF 400, 460 990 W
AF 580, 750 850 VA AF 580, 750 950 W
AF 1350, 1650 1900 VA AF 1350, 1650 1700 W
1
10
100
1000
10000
1
2000
20
2
3
5
30
50
200
300
500
3000
5000
2.5
10
100
1000
10000
2.5
25000
20000
2000
20
3
5
30
50
200
300
500
3000
5000
4
10
100
1000
10000
20000
40000
4
2000
20
5
30
50
200
300
500
3000
5000
30000
110100 1000 100001.5
10
100
1000
10000
1.5
15000
20
2
3
5
30
50
200
300
500
3000
5000
23 5203050 200 300 500 2000 5000
Cross-sectional area (Cu) in mm
2
Coil pull-in consumption: in VA for a.c. operated contactors
in W for d.c. operated contactors
single line length in m.
E0291DG
13579 13579 13579 13579
2000
660 V - 690 V
500 V
380 V - 400 V
220 V - 230 V
110 V
60 V
48 V
24 V
70
2
Low Voltage Products 2/89
1SBC100122C0202
A841D
A840D
Influence of the Length of Conductors
used in Contactor Control Circuit
Contactor Opening (contactor with a.c. operated coil)
Under certain conditions, an a.c. operated contactor does not open when the control circuit is de-energized.
This is due to a critical capacity of the excessively long control circuit line and the type of contactor coil control
layout (see diagrams A and B opposite).
This may be caused by the following factors:
high control voltage.
low coil holding consumption.
low contactor drop-out voltage (according to IEC 60947-4-1: 0.2 to 0.75 x Uc).
If lines longer than those indicated are required, the following measures must be taken:
select a contactor with a higher rating.
select a lower control voltage.
connect "RP" resistance in parallel with the contactor coil:
103
RP =(with C in µF)
C
The table and graph below can be used to determine the single length of line feeders (distance between the
control device and the contactor coil) in relation to:
the coil holding consumption VA.
the supply voltage.
the capacity in µF/km (depending on the control layout).
Wiring diagrams A and B opposite show two supply and coil control wiring examples.
Coil holding consumption (average value)
Contactors a.c. control circuit Contactors a.c. control circuit
50 Hz 50 Hz
A 9, 12, 16 8 VA AF 45, 50, 63, 75 7 VA
A 26, 30, 40 12 VA AF 95, 110 7 VA
A 45, 50, 63, 75 18 VA AF 145, 185 12 VA
A 95, 110 22 VA AF 210, 260, 300 10 VA
A 145, 185 35 VA AF 400, 460 12 VA
A 210, 260, 300 60 VA AF 580, 750 12 VA
AF 1350, 1650 48 VA
Permissible single length for the control circuit conductors on contactor opening:
Depending on the coil holding power consumption, on the supply voltage and on the control circuit conductor capacity.
Single control line length
Wiring diagram A
Via maintained pushbutton and 2-core
cable (with a capacity of 0.2 µF/km, for
example).
Single control line length
Wiring diagram B
Via momentary pushbutton plus hold-in
contact and 3-core cable (with a capacity
of 2 x 0.2 = 0.4 µF/km, for example).
Examples:
A 16 contactor
Coil voltage Uc = 500 V, 50 Hz, 8 VA contactor coil holding consum-
ption, control type: diagram A, via maintained pushbutton, and 2-core
cable with a capacity of 0.2 µF/km.
Max. permissible length: 60 m.
A 50 contactor
Coil voltage Uc = 23 0 V, 50 Hz, 18 VA contactor coil holding consum-
ption, control type: diagram B via momentary pushbutton, hold-in
contact and 3-core cable with a capacity of 2 x 0.2 µF/km = 0.4 µF/km.
Max. permissible length: 380 m.
0.60
Coil holding consumption in VA
Single line length in m.
10
100
1000
2
1.7
3
5
20
30
50
200
300
500
1700
E0292DG
110100 100023 5 2030 50 200 300 500
0.10
10
100
1000
10000
20
30
50
200
300
500
2000
3000
5000
0.20
10
100
1000
20
30
50
200
300
500
2000
3000
5000
5
0.30
10
100
1000
3.3
5
20
30
50
200
300
500
2000
3300
0.40
10
100
1000
2.5
5
20
30
50
200
300
500
2000
2500
0.50
10
100
1000
2
3
5
20
30
50
200
300
500
2000
Line capacitance in
µ
F/km
380
380 V - 400 V
660 V - 690 V
220 V - 230 V
110 V
60 V
48 V
24 V
500 V
188
60
13579 1357913579
Technical Data
Technical Data
2/90 Low Voltage Products
1SBC100122C0202
L2
L1
L3
N
A826D
L2
L1
L3
N
A825D
L2
L1
L3
N
A827D
Parallel Connection of Main Poles
Parallel Connection of Main Poles
Purpose: Increasing the a.c. resistive load.
Remarks:
– Parallel connection of main poles to increase the d.c. resistive load is not acceptable.
– Parallel connection of main poles does'nt increase the breaking capacity.
Means: The poles can be connected in parallel via connecting strips: see "Accessories".
– LP and LH for parallel connection of 2 poles,
– LY and LF for parallel connection of 3 poles,
– LG for parallel connection of 4 poles.
The table below shows the uprating factor for Ie / AC-1 max. in relation to the number of poles in parallel and for a max. switching frequency.
2 poles in // 3 poles in // 4 poles in //
Contactors Factor to be applied to the rated operational current Ie / AC-1 to obtain the permissible
a.c. Operated d.c. Operated Cycles / h current Ie / AC-1 with "n" poles in parallel.
3-pole contactors
A 9 ... A 75 AL..., TAL... 600 1.6 2.2
AF 50 ... AF 75 AE..., TAE... 300 1.6 2.2
AF 50 ... AF 75
A 95 ... A 300 AF 145 ... AF 750 300 1.6 2.2
AF 145 ... AF 750
AF 1350, AF 1650 AF 1350, AF 1650 30 1.6 2.2
4-pole contactors
A 9 ... A 75 AL..., TAL... 600 1.6 2.2 2.6
AF 45 ... AF 75 AE..., TAE... 300 1.6 2.2 2.6
AF 45 ... AF 75
EK... EK... 300 1.6 2.2 2.8
>> Accessories .............................................................................................................................................................................................................................................................. section 4
2
Low Voltage Products 2/91
1SBC100122C0202
Utilization of Contactors for Temporary / Intermittent Duty
The table below shows the factor (know as "On-Load Factor") to be applied to the rated operational current Ie / AC-1 to obtain the permissible
operational current Ie / AC-1 in relation to the switching frequency and the current flow time per cycle.
Operating cycles per hour 123612203060120
Preferred classes acc. to IEC 60947-4-1
1–3–12–30120
Current flow time per cycle Factors applicable to Ie / AC-1
5 s 5.2 5 4.9 4.7 4.3 4.0 3.7 3.4 2.8
10 s 3.8 3.7 3.6 3.4 3.1 3.0 2.8 2.6 2.2
20 s 2.8 2.7 2.7 2.6 2.5 2.4 2.2 2.0 1.6
30 s 2.4 2.3 2.3 2.2 2.1 2.1 1.9 1.7
40 s 2.2 2.1 2.1 2.0 1.9 1.9 1.7 1.5
60 s 1.9 1.8 1.8 1.8 1.7 1.7 1.5
Example:
A 9 contactor (intermittent duty, resistive load)
Rated operational current Ie / AC-1 at 55 °C
(see "Technical Data: Main Pole Utilization Characteristics") 22 A
Switching frequency 2 operating cycles/h
Current flow time per cycle 20 s
Factor to be applied to the current Ie / AC-1 2.7
Permissible current: 2.7 x 22 = 59 A
Temporary or Intermittent Duty
Technical Data
Technical Data
>> AC-1 Values ......................................................................................................................................................................................................................................... pages 2/64, 2/65, 2/76
2/92 Low Voltage Products
1SBC100122C0202
Questionnaire for Product Specifications :
Block Contactors
APPLICATION
Type of load :............................ No of phases..............
Utilisation category (AC / DC) :.......%AC4 if any :........
Voltage Un :............V Cos ϕ :........frequency :........
L/R .........ms
Nominal current In : .................................................... A
Making current :..............ABreaking current............ A
Duty : continuous - temporary - intermittent
Load factor (% of ON time) :...................................... %
Number of cycles per hour ............. or per year :..........
Expected durability : ....................... cycles
Number of main poles NO .............. NC........................
Other information : .........................................................
INSTALLATION
Ambient temperature : ...............................................°C
Ambient environment :...................................................
Humidity % : ..................................................................
Chemical pollution : .......................................................
Other :............................................................................
Mounting position (see drawing) :..................................
Customer : .................................................................... ABB correspondent : ...................................................
Contact person : .......................................................... Contact person : ..........................................................
Tel : .................................... e-mail : .............................. Tel :....................................e-mail :...............................
Project : ......................................................................... Date :.............................................................................
Position 1
Position 3
Position 4
Position 2
Position 5
Position 1 ± 30°
+30°
-30°
E0200D8
Position 6
ABB
ABB
ABB
ABB
Wiring : standard
(clamping screws or cage connectors)
ring tongue / flat pins (faston)
Other :................................ Cross section : ..................
Additional comments : ...................................................
.......................................................................................
CONTROL CIRCUIT
Coil voltage .....................VDC / AC f =..............Hz
Minimum / maximum : ....Vto ................................V
Surge suppressor : ........... type : ............................
Interface with PLC : .......................................................
Accessories : .................................................................
Number of auxiliary contacts : NO : ............ NC............
Low level contacts : .......................................................
PROTECTION
Short circuit protection :.................................................
Type : fuse - circuit break er - MMS
Max short circuit current : ........................................... A
Motor protection : overload relay - MMS
LOGISTIC AND PACKAGING
Quantity by batch :.........................................................
Delivery order : ..............................................................
.......................................................................................
APPROVALS AND OTHER REQUIREMENTS
Reference standards : ...................................................
Required approvals :......................................................
Customer specifications : ..............................................
Shock and vibrations : ...................................................
Expected quantity : ........................................... per Year
Expected first delivery date : .......... and Qty : ..............
Quantity on first 6 month : .........on first year : ..............
Specific quality assurance clauses :..............................
.......................................................................................
Other comments : ..........................................................
.......................................................................................
This document is used to define the contactor specifications according to the complete information on the application
ABB Entrelec - Control Division - France DQ01036 rev 1
Please photocopy and forward (see catalogue last back cover page).
2
Low Voltage Products 2/93
1SBC100122C0202
Questionnaire
Questionnaire
Other comments :
This document is used to define the contactor specifications according to the complete information on the application
ABB Entrelec - Control Division - France DQ01036 rev 1
Questionnaire for Product Specifications :
Block Contactors
Please photocopy and forward (see catalogue last back cover page).