SPECIFICATION CONTROL DRAWING REV:
1 DATE:
APRIL 25, 2005
© 2005 Tyco Electronics Corporation. All rights reserved.
Tyco Electronics Corporation
300 Constitution Drive
Menlo Park, CA 94025 USA
TITLE:
HEXASHIELD ADAPTOR FOR
CODE 40 CONNECTORS,
CONDUIT CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this drawing at any time.
Users should evaluate the suitability of the product for their
application.
DOCUMENT NO.
HEX40-AY-YY-AYY-C-YY
DRAWN:
IRT DATE:
JUL 03 CAGE CODE:
06090 DCR # D050118 FILE:
87002/40-C SCALE:
NONE SHEET:
1 OF 4
If this document is printed it becomes uncontrolled. Check for the latest revision.
øA THREAD
øB MAX
TYP
51.0 [ 2 .0 1"]O RING - SILICONE
TYP
STRAIGHT ADAPTO R
-00
øC THREAD
TYP
1 3 4 2
D
MAX
E
MAX
45º ADAPTOR
-45 90º ADAPTOR
-90
F
MAX
G
MAX
MAX
TYP
SPECIFICATION CONTROL DRAWING REV:
1 DATE:
APRIL 25, 2005
© 2005 Tyco Electronics Corporation. All rights reserved.
Tyco Electronics Corporation
300 Constitution Drive
Menlo Park, CA 94025 USA
TITLE:
HEXASHIELD ADAPTOR FOR
CODE 40 CONNECTORS,
CONDUIT CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this drawing at any time.
Users should evaluate the suitability of the product for their
application.
DOCUMENT NO.
HEX40-AY-YY-AYY-C-YY
DRAWN:
IRT DATE:
JUL 03 CAGE CODE:
06090 DCR # D050118 FILE:
87002/40-C SCALE:
NONE SHEET:
2 OF 4
If this document is printed it becomes uncontrolled. Check for the latest revision.
KIT DESCRIPTION
ITEM DESCRIPTION MATERIAL
1 BODY ASSEMBLY ALUMINIUM ALLOY
2 CONDUIT ADAPTOR ALUMINIUM ALLOY
3 CONIC RING ALUMINIUM ALLOY
4 STAR ALUMINIUM ALLOY
TABLE OF DIMENSIONS
Order
Number Shell
Size ØA Thread
Class 6H ØB
Max ØC Thread
Class 6g D
Max E
Max F
Max G
Max Ferrule Quantity
Mil. Com. Std. Optional
09 A 09 M12 x 1 19.0 M12 x 1 12.5 51.0 16.0 54.5 1 -
[0.75”] [0.49”] [2.01”] [0.63”] [2.15”]
11 B 11 M15 x 1 22.0 M15 x 1 13.0 51.5 17.5 56.0 2 -
[0.87”] [0.51”] [2.03”] [0.69”] [2.20”]
13 C 13 M18 x 1 25.5 M18 x 1 14.0 52.0 19.0 57.5 3 -
[1.00”] [0.55”] [2.05”] [0.75”] [2.26”]
15 D 15 M22 x 1 30.5 M22 x 1 14.5 53.0 20.5 59.0 5 -
[1.20”] [0.57”] [2.09”] [0.81”] [2.32”]
17 E 17 M25 x 1 33.5 M25 x 1 15.0 53.5 22.0 60.5 6 7
[1.32”] [0.59”] [2.11”] [0.87”] [2.38”]
19 F 19 M28 x 1 37.0 M28 x 1 15.5 54.0 23.5 62.0 7 8
[1.46”] [0.61”] [2.13”] [0.93”] [2.44”]
21 G 21 M31 x 1 38.5 M31 x 1 16.5 54.5 25.5 64.0 9 11
[1.52”] [0.65”] [2.15”] [1.00”] [2.52”]
23 H 23 M34 x 1 42.0 M34 x 1 17.0 55.5 27.0 65.5 10 11/12/13/15
[1.65”] [0.67”] [2.19”] [1.06”] [2.58”]
25 J 25 M37 x 1 46.5 M37 x 1 18.0 56.5 28.5 67.0 12 13/14/15/17/18
[1.83”] [0.71”] [2.22”] [1.12”] [2.64”]
PART NUMBERING
- PL ATING CODE:
B = CADMIUM OLIVE DRAB TO S AE-AMS-Q Q-P41 6
- MAT ERIAL CO DE:
A = ALUMINIUM ALLOY
- CONNECTO R CODE NUMBER
HEX40 A B 00 21 A9 C
C = ELECTROLESS NICKEL TO SAE-AMS-C-26074
HEX40 = MIL-C-38999 SERIES III AND IV
- F E RRULE Q UANTITY CODE
- ORDER NUMBER
- BODY STYL E
- C = CO ND UIT CLAMPING NUT
45 = 45º
90 = 90º
00 = ST RA IGHT
- DS = DRILLED ST AR - SEE NOTE 2
D
S
SPECIFICATION CONTROL DRAWING REV:
1 DATE:
APRIL 25, 2005
© 2005 Tyco Electronics Corporation. All rights reserved.
Tyco Electronics Corporation
300 Constitution Drive
Menlo Park, CA 94025 USA
TITLE:
HEXASHIELD ADAPTOR FOR
CODE 40 CONNECTORS,
CONDUIT CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this drawing at any time.
Users should evaluate the suitability of the product for their
application.
DOCUMENT NO.
HEX40-AY-YY-AYY-C-YY
DRAWN:
IRT DATE:
JUL 03 CAGE CODE:
06090 DCR # D050118 FILE:
87002/40-C SCALE:
NONE SHEET:
3 OF 4
If this document is printed it becomes uncontrolled. Check for the latest revision.
APPLICATION
- These adaptors are designed to be mounted on the following con nectors:
MIL-C-38999 Series III and IV
- They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specific ation circular
connectors only.
- They are designed primarily for open wire bundle installations but are als o designed to accept Raychem heat shrink
moulded parts where sealing is required – see illustration.
- The use of another “conduit” adaptor (e.g. a Tyco TXR40 with an H modification) is necessary to complete the assemb ly.
MOULDED PART
- Use in conjunction with the ferrules HET-A-0XX, which are purchased separately. Refer to HET-A-0XX S.C.D. for relevant
selection details.
INSTALLATION
- See Installation Procedure RPIP-696-04 for straight adaptors.
- See Installation Procedure RPIP-696- 07 for 45° and 90° adaptors.
PACKAGING
- All components are supplied in a pl astic bag.
NOTES!
1. Item 4 - Star - is not supplied with Hexashield Order Number 09.
2. The DS option, illustrated belo w, is for a Drilled Star that is available on sizes 15 to 25 for “Standard” ferrule qua ntities
only. This option is to allow unshielded wires to pass through the assembly.
øH MAX
STAR SIZE 15 17 19 21 23 25
ØH MAX 3.0 6.0 9.0 12.0 15.0 18.0
[0.12”] [0.24”] [0.35”] [0.47”] [0.59”] [0.71”]
SPECIFICATION CONTROL DRAWING REV:
1 DATE:
APRIL 25, 2005
© 2005 Tyco Electronics Corporation. All rights reserved.
Tyco Electronics Corporation
300 Constitution Drive
Menlo Park, CA 94025 USA
TITLE:
HEXASHIELD ADAPTOR FOR
CODE 40 CONNECTORS,
CONDUIT CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this drawing at any time.
Users should evaluate the suitability of the product for their
application.
DOCUMENT NO.
HEX40-AY-YY-AYY-C-YY
DRAWN:
IRT DATE:
JUL 03 CAGE CODE:
06090 DCR # D050118 FILE:
87002/40-C SCALE:
NONE SHEET:
4 OF 4
If this document is printed it becomes uncontrolled. Check for the latest revision.
3. Where the ferrule quantities required are standard, the item 4 - Star - is also standard.
If the optional quantity is selected then 2 items 4 will be supplied - one “split” and the other one standard*,
See below for illustration.
EXAMPLE: FERRULE QUANTITY CODE -A13
-A13 = -A10 SPLIT STAR + -A3 STANDARD STAR
* On Order Number 19 only, the Optional Ferrule quantit y of 8 uses a “standard” star also.
4. Assembly is to be permanently marked with Code Identity Number a nd Part Number.
(e.g. 06090 HEX40-AB-00-21-A9-C)
