AMC DOC. #: AMC8214_A
November 2001
Copyright© 2001, ADD Microtech Corp. P.1
DESCRIPTION FEATURES
The AMC8214 is a very high frequency video pre-amplifier
system especially for ultra high resolution monitor
applications (1280 × 1024 or higher). In addition to three
matched amplifiers, the AMC8214 contains three gain
adjustment circuits for white balance and three clamp gated
comparators for brightness control. Also, the AMC8214 has
an internally set output DC level of 1.0V, for some
applications, no external output DC level setting is required.
The AMC8214 is built into a 18 pin DIP package,
accommodating very compact and cost effective designs for
color monitor applications. All controls to AMC8214 such
as contrast and gain adjustment are 0V to 4V with high
impedance DC inputs. This makes the system easily
interfaced with 5V DACs in micro computer controlled
systems. Not only working with 8V power supply, The
AMC8214 can be operated directly from the heater of 6.2V,
which provides very low power consumption and enhance
the over all system performance.
! 4VP-P output with 1.7ns Tr/Tf and low
Electrical Magnetic Emission
! Power consumption 40% lower than
12V operated video amplifiers
! Can be Operated at 6.2V supply
voltage for lower power consumption
! 0V to 4V, high impedance DC
controls for Contrast, Gain
Adjustment and Output DC level
setting
# Output stage directly drives most
hybrid or discrete CRT drivers
# Low power 600mW;
ICC1 + ICC2 Typ. 90mA at full swing
APPLICATIONS
! High Resolution Monitor
! LCD Monitor
! Video signal Processor
! HDTV
! TV Monitors
PACKAGE PIN OUT
2
3
4
6
5
7
8
9
11
11
10
12
13
14
15
16
17
118
N PACKAGE
(TOP VIEW)
2
3
4
5
6
7
811
12
13
14
15
16
17
18
910
DW PACKAGE
(TOP VIEW )
200MHz
RGB VIDEO AMPLIFIER SYSTEM
AMC8214
VOUT DC SETTING
R VIDEO OUT PUT
VCC2
G VIDEO OUTPUT
G GAIN ADJ.
B VIDEO OUTPUT
B GAIN ADJ.
CLAMP GATE
VCC1
R VIDEO INPUT
R CLAMP CAP
G VIDEO INPUT
GND
G CLAMP CAP
B VIDEO INPUT
B CLAMP CAP
CONTRAST
R GAIN ADJ .
VOUT DC SETTING
R VIDEO OUT PUT
VCC2
G VIDEO OUTPUT
G GAIN ADJ.
B VIDEO OUTPUT
B GAIN ADJ.
CLAMP GATE
VCC1
R VIDEO INPUT
R CLAMP CAP
G VIDEO INPUT
GND
G CLAMP CAP
B VIDEO INPUT
B CLAMP CAP
CONTRAST
R GAIN ADJ.
A
AA
ADD MICROTECH CORP.
AM C DOC. #: AMC8214_A AMC8214
November 2001 200MHz RGB VIDEO AMPLIFIER SYSTEM
Copyright© 2001, ADD Microtech Corp. P.2
ORDER INFORMATION
Plastic DIP Plastic SOWB
TA (OC) N 18-pin DW 18-pin
0 to 70 AMC8214N AMC8214DW
ABSOLUTE MAXIMUM RATINGS
Power Supply Voltage (VCC1, VCC2) 9.0V
Video Output Current 30mA
Voltage at Any Input Pin VCC VIN GND
Junct ion Temperature (TJ) 150 OC
ESD Susceptibility 3.5KV
ESD Machine Model 300V
Storage Temperature -65 OC to 150 OC
Lead Temperature 300OC
: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground. Currents
are positive into, negative out of the specified terminal.
THERMAL DATA
N PACKAGE:
Thermal Resistance-Junction to Ambient, θJA 55 OC/W
Thermal Resistance-Junction to Case, θJC 30 OC/W
DW PACKAGE:
Thermal Resistance-Junction to Ambient, θJA 80 OC/W
Thermal Resistance-Junction to Case, θJC 37OC/W
Junct ion Tempera ture Cal culation: TJ = TA + (PD x θJA).
The θJA numbers are guidelines for the thermal performance of the device/PC-board system.
All of the above assume no ambient airflow.
AM C DOC. #: AMC8214_A AMC8214
November 2001 200M Hz RGB Video Amplifier System
Copyright© 2001, ADD Microtech Corp. P.3
RECOMMENDED OPERATING CONDITIONS
Recommended Operating Conditions
Parameter Pin Min. Typ. Max. Units
Power Supply Voltage (VCC1, VCC2) 1, 15 5.7 7.0 8.4 V
Video Input Signal 2, 4, 7 0.7 VP-P
Contrast Contr ol Vol tage 9 0 5 V
Gain Adjustment Control Voltage 11, 13, 16 0 5 V
Clamp Gate Pulse Signal Amplitude 10 TTL TTL
Clamp Gate Pulse Signal High Voltage 10 3 5 V
Clamp Gate Pulse Signal Low Voltage 10 0 0.8 V
Clamp Gate Pulse Width 10 150 ns
Video Output DC Level Setting 18 0.6 1.0 1.1 V
ELECTRICAL CHARACTERISTICS
TA = 25 OC; VCC1 = V CC2 = 7.0V; Contrast = 4V; R, G, B Gain Adj. = 4V; VOUT DC Setting = 1V; Clamp Gate = 0V;
unless otherwise stated. (See Figure 1) AMC8214
DC Parameter Symbol Test Co nd itions Min. Typ. Max. Units
Supply Current IS V
CC1 + V CC2 90 100 mA
Video Input Bias Voltage V2,4,7 2.42 2.62 2.82 V
Clamp Cap Cha rge Curre nt ICHG +1.0 mA
Clamp Cap Discha rge Current IDISCHG -1.0 mA
Input Current for Contrast and R,
G, B, Gain Adj. I10,11,13,16 -5 µA
Clamp Gat e High Current I10H Clamp Gate = 5V 0.1 µA
Clamp Gate Low Current I10L Clamp Gate = 0V -5 µA
High Video Output VOH R, G, B Clamp Cap = VCC1 5.2 V
Low Video Output VOL R, G, B Clamp Cap = 0V 0.1 V
Output Voltage Difference VO(DIFF) Between Any Two Channels ±2 10 mV
Spot Killer Voltage VSPOT Adjust VCC to Active 5.0 5.5 V
AM C DOC. #: AMC8214_A AMC8214
November 2001 200M Hz RGB Video Amplifier System
Copyright© 2001, ADD Microtech Corp. P.4
ELECTRICAL CHARACTERISTICS
TA = 25 OC; VCC1 = V CC2 = 7.0V; Contrast = 4V; R, G, B Gain Adj. = 4V; VOUT DC Setting = 1V; Clamp Gate = 0V;
unless otherwise stated. (see Figure 1) AMC8214
AC Parameter Symbol Test Conditio ns Min. Typ. Max. Units
Video Amplifier Gain AVMAX V
IN = 635mVPP 6 7 V/V
Gain Adjustment Range AVADJ V
13,15,18 = 0 to 4V 5 6 dB
Video Bandwidth BW VPP = 4V 200 MHz
Video Output Rise Time tr VPP = 4V, CLOAD = 7pf
tr of VIN = 1.5ns 1.75 2.1 ns
Video Output Fall Time tf VPP = 4V, CLOAD = 7pf
tf of VIN = 1.5ns 1.75 2.1 ns
AM C DOC. #: AMC8214_A AMC8214
November 2001 200M Hz RGB Video Amplifier System
Copyright© 2001, ADD Microtech Corp. P.5
Figure 1. AMC8214 Test Circuit
5
BLUE
VIDEO
IN
CONTRAST
8
9
10uF
75
7
0.1uF
0.1uF
6
GREEN
VIDEO
IN
RED
VIDEO
IN
Vcc ( 8V to 6.2V)
2
10uF
75
75
3
4
0.1uF
0.1uF
10uF
100uF
1
G VIDEO OUTPUT
680
14
B VIDEO OUTPUT
CLAMP GATE
0 - 5V0.1uF
11
10
0.1uF
12
13
0 - 5V
680
R VIDEO OUTPUT
17
0.1uF
16
15
0 - 5V
680
0.1uF
18
0 - 5V
AM C DOC. #: AMC8214_A AMC8214
November 2001 200M Hz RGB Video Amplifier System
Copyright© 2001, ADD Microtech Corp. P.6
Figure 2. Simplified Monitor Application Circuit
0 - 5V
CUTOFF
0 - 5V
CUTOFF
0 - 5V
CUTOFF
Vcc ( +80V)
+12V)
RED
VIDEO
IN 75 0.1uF
Contrast
GREEN
VIDEO
IN
BLUE
VIDEO
IN
10uF
75
75
10uF
0.1uF
0.1uF
Clamp
Gate
ABL
316 0.1uF
2680
0 - 5V
811 0.1uF
415
712
613
514
680
0 - 5V
680
0 - 5V
0.1uF
910
17
0.1uF100uF
Vcc ( 8V to 6.2V)
10uF
118 0.1uF
0 - 5V
100uF
AM C DOC. #: AMC8214_A AMC8214
November 2001 200M Hz RGB Video Amplifier System
Copyright© 2001, ADD Microtech Corp. P.7
18-Pin Plastic DIP
INCHES MILLIMETERS
MIN TYP MAX MIN TYP MAX
A 1.020 1.030 1.060 25.91 26.16 26.92
B 0.245 0.250 0.255 6.22 6.35 6.48
C - - 0.210 - - 5.33
D - 0.018 - - 0.46 -
F - 0.060 - - 1.52 -
G - 0.100 - - 2.54 -
H 0.030 - 0.070 0.76 - 1.78
J 0.008 - 0.015 0.20 - 0.38
K 0.115 0.130 0.150 2.92 3.30 3.81
L 0.300 BSC. 7.62 BSC.
DG
F
1
H
18
A
M
J
10
9
B
L
C
K
M - 15º - 15º
AM C DOC. #: AMC8214_A AMC8214
November 2001 200M Hz RGB Video Amplifier System
Copyright© 2001, ADD Microtech Corp. P.8
IMPORTANT NOTICE
ADD Microtech (ADDM) reserves the right to make changes to its products or to discontinue any integrated circuit
product or service without notice, and advises its customers to obtain the latest version of relevant information to
verify, before placing orders, that the information being relied on is current.
A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe
property or environmental damage. ADDM integrated circuit products are not designed, intended, authorized, or
warranted to be suitable for use in life-support applications, devices or systems or other critical applications. Use of
ADDM products in such applications is understood to be fully at the risk of the customer. In order to minimize
risks associated with the customer’s applications, the customer should provide adequate design and operating
safeguards.
ADDM assumes to no liability to customer product design or application support. ADDM warrants the performance
of its products to the specifications applicable at the time of sale.
U.S. Asia Pacific Region
ADD Microtech Inc.
492 Altamont Drive
Milpitas, CA 95035
ADD Microtech Corp
3F, 132, Sec. 4, Chung Hsiao E. Rd.,
Taipei, Taiwan
TEL: (408) 9410420 TEL: 2-27760166
FAX: (408) 9410864 FAX: 2-27764208