CT10-12057/PP-84026/15M/Printed 01/11/USA Apex Tool Group No. T550805 © 2011, Apex Tool Group, LLC
Specifications subject to change without notice.
1460 0 York Road, Suite A
Sparks, MD 21152
www.apextoolgroup.com
Acuna Tools Corp
3100 NW 72 AVE
Suite 103
Miami, FL 33122
Tel: (305) 592-4438
Judy@acunatools.com
eller, the name synonymous with rework technology innovation, is
once again leading the way with application solutions to your most
complex electronics manufacturing challenges...
Ř 2XUWLSIXPHH[WUDFWLRQDQGYROXPHIXPHH[WUDFWLRQV\VWHPVDUHSHUIHFW
examples of Weller responding to current industry trends and anticipating
the future direction of occupational safety and health awareness.
Ř 6\VWHPVFHQWHUHGRQRXU:3VROGHULQJSHQFLORIIHUWKHLQFUHDVHGSRZHU
needed for the latest high-mass PCBs.
Ř ,QQRYDWLYH:HOOHUHQJLQHHULQJKDVH[WHQGHGWLSOLIHRIIHULQJVDYLQJVWR
manufacturers striving to win in today’s more competitive marketplace.
Ř :HOOHULQYHVWPHQWVLQEDWWHU\VROGHULQJWHFKQRORJ\KDYH\LHOGHGFRUGOHVVSRUWDEOH
products that offer impressive performance with equally impressive battery life.
Your Weller sales representative can help you increase
productivity, reduce costs, and improve safety. And all Weller
representatives are supported by a staff of highly experienced
technical experts who can analyze your soldering applications
and offer a system solution that will not only answer the current challenge, but
address future ones. Find out more. Contact Weller at www.apextoolgroup.com.
THE WELLER ADVANTAGE
W
Update photo
replace w/
6966C
C O N T E N T S 4
Soldering Stations
26
Rework Stations
34
Hot Air Stations
61
Soldering Irons
66
Cordless Soldering Irons
69
Heat Guns
76
Dispensing
70
Soldering Guns
71
Accessories
44
Fume Extraction
SOLDERING
STATIONS WD1002
DIGITAL SILVER SERIES SOLDERING STATION
4
See page 9 for components and specifications
See page 5 for LT series soldering tips
FEATURES AND BENEFITS:
N Modern LCD technology gives the user critical information at a glance
N Three freely programmable temperature preset buttons allow
quick and easy temperature changes
N Powerful 80-watt pencil allows rapid production when working with lead-free
solder, high-mass components, and other demanding applications
The following functions are built in to the WD1 power unit:
N Setback time: Allows programming of the number of minutes
(1 – 99), before temperature sets back to idle mode.
N Standby temperature: Allows selection of desired setback temperature,
down to 200°F.
N Temperature lockout: Allows supervisor to easily set a temperature
that cannot be changed by the operator.
N °F/°C switching: Allows the temperature display to read in either °F or °C.
N Temperature offset: Allows the display temperature to be adjusted
+/- 72°F when working with higher mass tips, where the temperature
reading can be affected by the mass of the tip.
N Auto-Off Time: Allows programming the number of minutes
of inactivity (1 – 999), before the station powers off automatically.
N WD1002 complete with WD1 power supply, WP80 iron, LTB tip,
WDH10 stand, and WDC2 dry cleaner 0051512599.
N Optional longer barrel part number 0058744846.
Optional longer
barrel available
Part # 0058744846
THE WELLER ADVANTAGE:
Another Weller breakthrough gives you two pencils in one. This powerful
80-watt pencil allows rapid production when working with lead-free solder,
high mass components, and other demanding applications. A special silver
heating element for low thermal loss and fast recovery make this unit ideal
for continuous production work. The interchangeable barrel gives you the
option of working with either a traditional length or shorter tip-to-grip.
WD1002T
SAME AS ABOVE WITH WDH10T STOP & GO STAND
WDH10T Stop & Go stand.
WP80
The Silver Spool heating
element provides low thermal
loss and fast recovery
TIPS
LT SERIES TIPS FOR WSP80 & WP80 SOLDERING PENCILS.
TINNED WITH LEAD FREE SOLDER
A B C
Cat No. IN. MM IN. MM IN. MM
LTA 0.063 1.60 0.028 0.70 0.380 13.50
LTB 0.094 2.40 0.031 0.79 0.430 13.50
LTC 0.126 3.20 0.031 0.79 0.430 13.50
LTD 0.181 4.60 0.031 0.79 0.430 13.50
LTH 0.031 0.79 0.016 0.40 0.430 13.50
LTK 0.047 1.20 0.016 0.40 0.730 21.00
LTL 0.078 2.00 0.039 1.00 0.790 21.00
LTM 0.126 3.20 0.047 1.20 0.790 21.00
CHISEL
BENT CHISEL
A B C
Cat No. IN. MM IN. MM IN. MM
LT4X 0.047 1.20 0.016 0.40 0.590 16.50
LTAX 0.063 1.60 0.032 0.80 0.500 13.50
LTHX 0.032 0.80 0.016 0.40 0.790 18.00
SINGLE FLAT
A C
Cat No. IN. MM IN. MM
LT1 0.010 0.25 0.430 14.00
LT1L 0.008 0.20 0.980 26.40
LT1S 0.008 0.20 0.590 15.00
LTAS 0.063 1.60 0.380 13.50
LTCS 0.126 3.20 0.430 13.50
LTS 0.016 0.40 0.790 21.00
ROUND
A C
Cat No. IN. MM IN. MM
LT1LX 0.008 0.20 0.980 26.40
LT1SLX 0.016 0.40 0.760 20.50
LT1X 0.016 0.40 0.370 12.50
A C
Cat No. IN. MM IN. MM
LTKN 0.080 2.00 0.650 16.50
BENT ROUND
KNIFE
SMT BLADE
TIP RETAINERS
A C
Cat No. IN. MM IN. MM
LTF 0.047 1.20 0.490 13.50
A B C
Cat No. IN. MM IN. MM IN. MM
0054450199 0.410 10.41 0.024 0.60 0.280 7.11
0054450299 0.661 16.80 0.024 0.60 0.280 7.11
0054450399 0.820 20.83 0.024 0.60 0.280 7.11
Cat No.
0058744845 Retainer for WP80 Soldering Pencil
0058744846 Optional Long Reach Retainer for WP80 Soldering Pencil
0058744710 Tip Retainer Assembly for WSP80 Soldering Pencil
LT1S
LT1
0058744845
0058744846
0058744710 5
SOLDERING
STATIONS
SOLDERING
STATIONS
6
WD1001
WD1000HPT
DIGITAL SILVER SERIES SOLDERING STATION
DIGITAL SILVER SERIES SOLDERING STATION
THE WELLER ADVANTAGE:
With a tip-to-grip distance of just 37 mm, accuracy is unsurpassed. And with the
heating element built into the pencil rather than the tip, replacement tips cost
substantially less when compared to systems with tip cartridges.
THE WELLER ADVANTAGE:
With 120 watts of power this station is ideal for
soldering on difficult circuit boards with high heat
sinks. Target applications include high density
circuit boards and solar panel production.
FEATURES AND BENEFITS:
N Super-fast heat-up and superior thermal recovery
for fast efficient soldering
N Three freely programmable temperature preset
buttons allow quick and easy temperature changes
The following functions are built in to the WD1 power unit:
N Setback time: Allows programming of the number of minutes
(1 – 99), before temperature sets back to idle mode.
N Standby temperature: Allows selection of desired setback
temperature, down to 200°F.
N Temperature lockout: Allows supervisor to easily set a temperature
that cannot be changed by the operator.
N °F/°C switching: Allows the temperature display to read in either °F or °C.
N Temperature offset: Allows the display temperature to be adjusted +/- 72°F
when working with higher mass tips, where the temperature reading can be
affected by the mass of the tip.
N Auto-Off Time: Allows programming the number of minutes of inactivity
(1 – 999), before the station powers off automatically.
N WD1001 complete with WD1 power supply, WMP 65 Watt Iron, NT1 tip, WDH20 stand,
WDC2 dry cleaner 0051512599 and 0058751710 tip removal tool.
See page 8 for components and specifications
See page 7 for NT series soldering tips
FEATURES AND BENEFITS:
N Compact, powerful heating element guarantees dynamic performance
N Rapid transfer of heat into the soldering tip is quickly and precisely
controlled with sophisticated electronics allowing the WP120 to cope
with big, difficult solder joints
N Three freely programmable temperature preset buttons allow quick
and easy temperature changes
WD1000HPT complete with WD1M power supply, WP120 iron, XTB tip
and WDH10T Stop & Go stand.
See page 10 for XT series soldering tips
Just 37 mm (1.46") tip-to-grip,
so you’re close to the work.
SOLDERING
STATIONS
7
TIPS
NT SERIES TIPS FOR WMP MICRO SOLDERING PENCIL.
TINNED WITH LEAD FREE SOLDER
A C
Cat No. IN. MM IN. MM
NT1 0.010 0.25 0.291 7.40
A C
Cat No. IN. MM IN. MM
NT1S 0.010 0.25 0.333 8.45
MICRO
MICRO
BENT ROUND
A B C
Cat No. IN. MM IN. MM IN. MM
NT1X 0.016 0.40 0.063 1.60 0.321 8.15
A C
Cat No. IN. MM IN. MM
NT4 0.047 1.20 0.390 9.90
ROUND
A B C
Cat No. IN. MM IN. MM IN. MM
NT6 0.063 1.60 0.016 0.40 0.372 9.45
NTA 0.063 1.60 0.016 0.40 0.331 8.40
NTB 0.094 2.40 0.031 0.80 0.289 7.35
NTC 0.126 3.20 0.031 0.80 0.305 7.75
NTD 0.157 4.00 0.031 0.80 0.305 7.75
NTH 0.031 0.80 0.016 0.40 0.331 8.40
NTK 0.047 1.20 0.016 0.40 0.331 8.40
CHISEL
BENT CHISEL
A B C
Cat No. IN. MM IN. MM IN. MM
NTAX 0.063 1.60 0.031 0.40 0.339 8.61
GULL WING FOR DRAG SOLDERING
TIP REMOVAL TOOL
A B C
Cat No. IN. MM IN. MM IN. MM
NTGW 0.079 2.00 0.118 3.00 0.528 13.40
Cat No.
0058751710
A C
Cat No. IN. MM IN. MM
NT1SC 0.008 0.20 0.291 7.40
FINE CHISEL
SOLDERING
STATIONS
8
WD1
SINGLE CHANNEL POWER UNIT
Specifications:
Voltage 120 V (input); 24 V (output)
Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm)
Power consumption 95W
Tempe rat ur e ra ng e 150° F - 850° F (50° C - 450° C)
ESD safe Yes
Tempe rat ur e ac cu rac y ± 17° F (± 9° C)
Tempe rat ur e st ab ili ty ± 10° F (± 6° C)
WD2
DUAL CHANNEL POWER UNIT
Specifications:
Voltage 120 V (input); 24 V (output)
Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm)
Power consumption 160W
Tempe rat ur e ra ng e 150° F - 850° F (50° C - 450° C)
ESD safe Yes
Tempe rat ur e ac cu rac y ± 17° F (± 9° C)
Tempe rat ur e st ab ili ty ± 10° F (± 6° C)
WD1001
WD1 SINGLE CHANNEL POWER UNIT
WITH WMP 65 WATT SOLDERING PENCIL
AND WDH20 SOLDERING PENCIL STAND
Specifications:
Voltage 120 V (input); 24 V (output)
Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm)
Power consumption 95W
Tempe rat ur e ra ng e 150° F - 850° F (50° C - 450° C)
ESD safe Yes
Tempe rat ur e ac cu rac y ± 17° F (± 9° C)
Tempe rat ur e st ab ili ty ± 10° F (± 6° C)
Stand WDH20 (Order No. 0051512299)
Pencil WMP
Tip NT1
PRODUCT LINE
CONFIGURED TO GIVE YOU THE MOST EFFICIENT SOLUTION
SOLDERING
STATIONS
9
WD1002T
WD1 SINGLE CHANNEL POWER UNIT
WITH WP80 80 WATT SOLDERING PENCIL
AND WDH10T STOP & GO STAND
Specifications:
Voltage 120 V (input); 24 V (output)
Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm)
Power consumption 95W
Tempe rat ur e ra ng e 150° F - 850° F (50° C - 450° C)
ESD safe Yes
Tempe rat ur e ac cu rac y ± 17° F (± 9° C)
Tempe rat ur e st ab ili ty ± 10° F (± 6° C)
Stand WDH10T (Order No. 0051516199)
Pencil WP80 (Order No. 0052918099)
Tip LTB
Barrels Short (Included with the WP80)
(Order No. 0058744845)
Long (Optional) (Order No. 0058744846)
WD1000HPT
WD1M SINGLE CHANNEL POWER UNIT
WITH WP120 HIGH OUTPUT SOLDERING
PENCIL AND WDH10T STOP & GO STAND
Specifications:
Voltage 120 V (input); 24 V (output)
Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm)
Power consumption 160 W
Tempe rat ur e ra ng e 150° F to 850° F (50° C - 450° C)
ESD safe Yes
Tempe rat ur e ac cu rac y ± 17° F (± 9° C)
Tempe rat ur e st ab ili ty ± 10° F (± 6° C)
Stand WDH10T (Order No. 0051516199)
Pencil WP120 (Order No. 0052919399)
Tip XTB
WD1002
WD1 SINGLE CHANNEL POWER UNIT
WITH WP80 80 WATT SOLDERING PENCIL
AND WDH10 SOLDERING PENCIL STAND
Specifications:
Voltage 120 V (input); 24 V (output)
Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm)
Power consumption 95W
Tempe rat ur e ra ng e 150° F - 850° F (50° C - 450° C)
ESD safe Yes
Tempe rat ur e ac cu rac y ± 17° F (± 9° C)
Tempe rat ur e st ab ili ty ± 10° F (± 6° C)
Stand WDH10 (Order No. 0051512199)
Pencil WP80 (Order No. 0052918099)
Tip LTB
Barrels Short (Included with the WP80)
(Order No. 0058744845)
Long (Optional) (Order No. 0058744846)
0054470199 XTAL, .063" x 1.543" / 1.6 mm x 39.2 mm Reach Chisel Tip
0054470299 XTM, .126" x 1.543" / 3.2 mm x 39.2 mm Reach Chisel Tip
0054470399 XTA, .063" x 1.420" / 1.6 mm x 36.1 mm Reach Chisel Tip
0054470499 XTB, .094" x 1.420" / 2.4 mm x 36.1 mm Reach Chisel Tip
0054470599 XTC, .126" x 1.420" / 3.2 mm x 36.1 mm Reach Chisel Tip
0054470699 XTD, .181" x 1.360" / 4.6 mm x 34.5 mm Reach Chisel Tip
0054470799 XTE, .232" x 1.360" / 5.9 mm x 34.5 mm Reach Chisel Tip
0054470899 XTAA, .063" x 1.437" / 1.6 mm x 36.5 mm Reach, Round Angled Tip
0054470999 XTBB, .094" x 1.437" / 2.4 mm x 36.5 mm Reach, Round Angled Tip
0054471099 XTCC, .126" x 1.437" / 3.2 mm x 36.5 mm Reach, Round Angled Tip
0054471199 XTKN, .079" x 1.772" / 2.0 mm x 45 mm Reach, Knife Tip
0054471299 XTGW, .090/.126" x 1.437" / 2.0 mm x 45 mm Reach Gull Wing Tip
0054471399 XTH, .016/.031" x 1.437" 0.4 mm / 0.8 mm x 36.5 mm Reach, Chisel Tip
0054471499 XTO, .039" x 1.437" / 1.0 mm x 36.5 mm Reach, Long Conical Tip
0054471599 XTBS, .094" x 1.437" / 2.4 mm x 36.5 mm Reach, Round Tip
0054471699 XTCS, .126" x 1.437" / 3.2 mm x 36.5 mm Reach, Round Tip
0054471799 XTDS, .181" x 1.437" / 4.6 mm x 36.5 mm Reach, Round Tip
0054471899 XTF, .047" x 1.437" / 1.2 mm x 36.5 mm Reach, Round Angled Tip
Tips Order # Description
SOLDERING
STATIONS
10
TIPS
XT SERIES TIPS FOR THE WP120 SOLDERING PENCIL.
TINNED WITH LEAD FREE SOLDER.
SOLDERING
STATIONS
11
Simple PC Connection
A USB connector on the rear of the
"WDxM" Series stations allows data
logging, ISO verification and station
control via an external PC. Free USB
cable and software included.
WD1000M
MULTI-FUNCTION DIGITAL SOLDERING STATION
WITH PC INTERFACE
THE WELLER ADVANTAGE:
Extremely fast heat-up and ultra-fine, ultra-precise tips make this station the
choice for soldering and rework on densely populated printed circuit boards.
See page 16 for components and specifications
See page 14 for RT series soldering tips
FEATURES AND BENEFITS:
N Ideal for use under magnification
N Fast heat-up, thermal stability, and fine tips make it perfect
for production or rework, in standard or lead-free applications
N Heating element is built into the soldering tip for super-fast
heat-up and recovery
N When placed in the stand, pencil has auto-off, or temperature
setback capability for extended tip life
The following functions are built into the WD1M power unit:
N Setback time: Allows programming of the number of minutes
(1 – 99), before temperature sets back to idle mode.
N Standby temperature: Allows selection of desired setback
temperature, down to 200°F.
N Temperature lockout: Allows supervisor to easily set a temperature
that cannot be changed by the operator.
N °F/°C switching: Allows the temperature display to read
in either °F or °C.
N Temperature offset: Allows the display temperature to be adjusted
+/- 72°F when working with higher mass tips, where the temperature
reading can be affected by the mass of the tip.
N Auto-Off Time: Allows programming the number of minutes
of inactivity (1 – 999), before the station powers off automatically.
N WD1000M complete with WD1M power supply, WMRP pencil, RT3 tip,
WDH50 stand and WDC2 dry cleaner 0051512599.
Chrome plated aluminum
pencil weighs just 75 g
Just 45 mm (1.77") tip-to-grip,
so you’re close to the work
Tips have integral cool comfort
grips for “no-tool” tip change
SOLDERING
STATIONS
12
WD2000M
MULTI-FUNCTION DIGITAL SOLDERING STATION
WITH PC INTERFACE AND TWO 80 WATT OUTPUTS
THE WELLER ADVANTAGE:
Allows simultaneous use of both the WMRP micro soldering pencil and the
new WMRT micro desoldering tweezers. An ideal package for reworking small
component circuit boards.
FEATURES AND BENEFITS:
N Fast heat-up, thermal stability, and fine tips make it perfect
for production or rework, in standard or lead-free applications.
N Heating element is built into the soldering tip for super-fast
heat-up and recovery.
N When placed in the stand, both micro tools offer auto-off or
temperature setback capability for extended tip life.
The following functions are built in to the WD2M power unit:
N Setback time: Allows programming of the number of minutes
(1 – 99), before temperature sets back to idle mode.
N Standby temperature: Allows selection of desired setback
temperature, down to 200°F.
N Temperature lockout: Allows supervisor to easily set
a temperature that cannot be changed by the operator.
N °F/°C switching: Allows the temperature display to read
in either °F or °C.
N Temperature offset: Allows the display temperature to be
adjusted +/- 72°F when working with higher mass tips,
where the temperature reading can be affected by the mass
of the tip.
N Auto-Off Time: Allows programming the number of minutes
of inactivity (1 – 999), before the station powers off automatically.
N WD2000M complete with WD2M power supply WMRP pencil, RT3 tip,
WDH50 stand and WDC2 dry cleaner 0051512599; and WMRT thermal
tweezer, RTW2 tip cartridge, WMRTH stand and 0052241999 sponge.
N USB cable and monitor software included.
Silver buttons on the front panel indicate compatibility with silver
soldering pencil (WMRP) and micro rework tweezers (WMRT).
See page 16 for components and specifications
See page 14 for RT and RTW series tips
The tweezers micro design employs the use
of tip cartridges with a twin parallel design,
so the tips are always in alignment. With the
WMRT, you are able to desolder very small
SMD components down to 0201.
Both micro size handpieces have
extremely short heat-up time and
optimum heat transfer capability.
RT1 Needle tip 0.2 mm / .008" – 0054460199
RT1SC Micro Chisel tip 0.4mm / .016" 0.15 mm / .006" 0054461299
RT2 Point tip Ø 0.8 mm – 0054460299
.032"
RT3 Chisel shape, straight 1.3 mm 0.4 mm 0054460399
.051" .0157"
RT4 Chisel shape, straight 1.5 mm 0.4 mm 0054460499
.059" .0157"
RT5 Chisel shape, bent, 30° 0.8 mm 0.4 mm 0054460599
.032" .0157"
RT6 Round shape, beveled, 45° Ø 1.2 mm – 0054460699
.047"
RT7 Knife tip, 45° 2.2 mm – 0054460799
.0866"
RT8 Chisel tip, straight 2.2 mm 0.4 mm 0054460899
.087" .016"
RT9 Chisel tip, straight 0.8 mm 0.4 mm 0054460999
.032" .016"
RT10 Gull wing for drag soldering 1.2 mm 2.0 mm 0054461099
.047" .079"
RT11 Chisel Tip 3.6 mm 0.9 mm 0054461199
.142" .035"
SOLDERING
STATIONS
14
TIPS
Model Description Width A Thickness B Order No.
RTW TIP SETS FOR WMRT SOLDERING TWEEZER
RTW1 Conical 0.4 mm / .016" 45° 0054465199
RTW2 Conical 0.7 x 0.4 mm 45° 0054465299
.028" x .016"
RTW3 Blade 3.0 x 1.0 mm 45° 0054465399
.118" x .040"
RTW4 Blade 6.0 x 1.0 mm 45° 0054465499
.236" x .040"
Model Description Dimensions Order No.
RT SERIES TIPS FOR WMRP MICRO SOLDERING PENCIL
R.028"
R.118"
R.236"
.0157"
.01"
.01"
SOLDERING
STATIONS
15
Model Description Width A Thickness B Order No.
RTW1MS Conical 0.4 mm / .016" 45° 0054465599
RTW2MS Conical 0.7 x 0.4 mm 45° 0054465799
.028" x .016"
RTW3MS Blade 3.0 x 1.0 mm 45° 0054465899
.118" x .040"
RTW4MS Blade 6.0 x 1.0 mm 45° 0054465999
.236" x .040"
Model Description Dimensions Order No.
R.028"
R.118"
R.236"
.0157"
.01"
.01"
RT1MS TIP Needle tip 0.2 mm / .008" – 0054461499
RT1SCMS TIP Micro Chisel tip 0.4mm / .016" 0.15 mm / .006" 0055461599
RT2MS TIP Point tip Ø 0.8 mm – 0055461799
.032"
RT3MS TIP Chisel shape, straight 1.3 mm 0.4 mm 0054461699
.051" .0157"
RT4MS TIP Chisel shape, straight 1.5 mm 0.4 mm 0054461899
.059" .0157"
RT5MS TIP Chisel shape, bent, 30° 0.8 mm 0.4 mm 0054461999
.032" .0157"
RT6MS TIP Round shape, beveled, 45° Ø 1.2 mm – 0054462099
.047"
RT7MS TIP Knife tip, 45° 2.2 mm – 0054462199
.0866"
RT8MS TIP Chisel tip, straight 2.2 mm 0.4 mm 0054462299
.087" .016"
RT9MS TIP Chisel tip, straight 0.8 mm 0.4 mm 0054462399
.032" .016"
RT10MS TIP Gull wing for drag soldering 1.2 mm 2.0 mm 0054462499
.047" .079"
RT11MS TIP Chisel Tip 3.6 mm 0.9 mm 0054461099
.142" .035"
RT SERIES MIL SPEC TIPS FOR WMRPMS MIL SPEC MICRO SOLDERING PENCIL
RTWMS SERIES MIL SPEC TIP SETS FOR WMRTMS MIL SPEC MICRO TWEEZER
Note: MS tips must be used with a MS handle to meet the Mil Spec
SOLDERING
STATIONS
16
PRODUCT LINE
CONFIGURED TO GIVE YOU THE MOST EFFICIENT SOLUTION
WD1M
SINGLE CHANNEL POWER UNIT
Specifications:
Voltage 120 V (input); 24 V (output)
Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm)
Power consumption 160W
Tempe rat ur e ra ng e 150° F - 850° F (50° C - 450° C)
ESD safe Yes
Tempe rat ur e ac cu rac y ± 17° F (± 9° C)
Tempe rat ur e st ab ili ty ± 10° F (± 6° C)
WD2M
DUAL CHANNEL POWER UNIT
Specifications:
Voltage 120 V (input); 24 V (output)
Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm)
Power consumption 160W
Tempe rat ur e ra ng e 150° F - 850° F (50° C - 450° C)
ESD safe Yes
Tempe rat ur e ac cu rac y ± 17° F (± 9° C)
Tempe rat ur e st ab ili ty ± 10° F (± 6° C)
WD2000M
WD2M DUAL CHANNEL POWER UNIT
WITH WMRP MICRO SOLDERING PENCIL
AND WDH50 SOLDERING PENCIL STAND,
PLUS WMRT MICRO THERMAL TWEEZER
AND WMRTH STAND
Specifications:
Voltage 120 V (input); 24 V (output)
Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm)
Power consumption 160W
Tempe rat ur e ra ng e 150° F - 850° F (50° C - 450° C)
ESD safe Yes
Tempe rat ur e ac cu rac y ± 17° F (± 9° C)
Tempe rat ur e st ab ili ty ± 10° F (± 6° C)
Stands WDH50 (Order No. 0051515699)
WMRTH (Order No. 0051514699)
Pencil WMRP Micro Soldering Pencil
(Order No. 0052917199)
Tweez e r WMRT Micro Tweezers
(Order No. 0051317399)
WD1000M
WD1M SINGLE CHANNEL POWER UNIT
WITH WMRP MICRO SOLDERING PENCIL
AND WDH50 SOLDERING PENCIL STAND
Specifications:
Voltage 120 V (input); 24 V (output)
Footprint 5.27" x 4.25" x 5.77" (134 x 108 x 147 mm)
Power consumption 160W
Tempe rat ur e ra ng e 150° F - 850° F (50° C - 450° C)
ESD safe Yes
Tempe rat ur e ac cu rac y ± 17° F (± 9° C)
Tempe rat ur e st ab ili ty ± 10° F (± 6° C)
Stand WDH50 (Order No. 0051515699)
Pencil WMRP (Order No. 0052917199)
SOLDERING
STATIONS
17
COMPATIBILITY
MULTIPLE OPTIONS I WELLER POWER UNITS AND ACCESSORIES
WD1 WD2 WD1M WD2M TIP STYLE
WSP80 N N N N LT SERIES
WP80 N N N N LT SERIES
WMP N N N N NT SERIES
WMRP N N RT SERIES
WMRPMS N N RTWMS SERIES
WMRT N N RTW SERIES
WMRTMS N N RTWMS SERIES
WTA50 N N N N WTA SERIES
WSP150 N N1 N LHT SERIES
WHP80 N N N N
WSB80 N N N N
WSB150 N N1 N
FE75 N N N N LT SERIES
WP120 N1 N XT SERIES
MPR80 N N N N LT S E R I E S
1 - Base unit label must state 160 watts
SOLDERING
STATIONS
18
WSP150
HEAVY DUTY SOLDERING PENCIL
(Order no. 0052917099)
This heavy duty 150W / 24V soldering pencil is used for jobs with extremely high
heat requirements and large heat sinks. When operating with dual power units
WD2 or WD2M, the second port is disabled. Use with WDH30 (0051515299)
support. Comes with LHTF tip.
Available tips
Cat. No. Order No. Style A B
LHTD 0054445299 Chisel 0.197" (5.0 mm) 0.79" (2.0 mm)
LHTE 0054445199 Chisel 0.276" (7.0 mm) 0.79" (2.0 mm)
LHTF 0054445099 Chisel 0.366¨ (9.3 mm) 0.79" (2.0 mm)
LHTD45 0054445699 Sloped 45° 0.197" (5.0 mm) —
LHTDX 0054446299 Chisel bent 0.199"(5.0mm) 0.79"(2.0mm)
LHTEX 0054446199 Chisel bent 0.276"(7.0mm) 0.79"(2.0mm)
LHTFX 0054446099 Chisel bent 0.354"(9.0mm) 0.79"(2.0mm)
WHP80
PREHEATING PLATE
(Order no. 0052702899)
This 80W / 24V preheater is used with any 80W power unit. It is used to
slowly increase the temperature of a PC board prior to rework to minimize
the risk of damaging sensitive components. Heating surface is (3.15" x 1.97")
80 mm x 50 mm. The temperature range is adjustable from 150°F to 850°F
(66°C to 454°C).
WMRT
MICRO DESOLDERING TWEEZERS
(Order no. 0051317299)
The new WMRT desoldering tweezers enables precise desoldering of very small
SMD components down to 0201. The high-speed regulation of the WD1M and
WD2M power units drive the tweezers. Use with WMRTH support (Order no.
0051514699). For WMRT tweezers and WMRTH support in a set (Order no.
0051317399). Comes with RTW2 tip set.
Ř:05706PLOVSHFYHUVLRQ2UGHUQR7LSVHWQRWLQFOXGHG
(See page 15 for RTWMS tip sets.)
WTA50
THERMAL TWEEZERS
(Order no. 0051317199 )
This 50W / 24V tool is used to desolder SMD components. The tweezer has
two movable heating elements so that tip alignment can be adjusted. Use
with AK51 support (Order no. 0051504299). For WTA50 tweezers and AK51
support in a set (Order no. 0053313399). Comes with WTA1 tip sets. (See tips
on page 32).
ACCESSORIES
MIX AND MATCH TO BUILD YOUR OWN CUSTOM SOLUTION
See page 17 to determine accessory and power unit compatibility
SOLDERING
STATIONS
19
WSB80
WP120
SOLDER BATH
(Order no. 0052704099)
HIGH-POWER SOLDERING PENCIL
(Order no. 0052919399)
The 80W / 24V solder bath is used with any 80W power unit. The solder bath
is used as a rework preparation tool to tin wire ends and to clean and tin
component leads. It can also be used to clean extraneous solder particles in
preparation for rework. Temperature range is adjustable from 150°F to 850°F
(66°C to 454°C). Compatible with lead free solders. Bath dimensions 0.79" x
0.98" depth (20 mm x 25 mm depth).
120W / 24V pencil is perfect for lead-free and other heavy-duty soldering
applications. ESD safe to protect sensitive components. Comes with XTB tip.
MPR80
PERITRONIC IRON
(Order no. 0053313199)
80W / 24V Peritronic soldering pencil has offset tip for all-around visibility when
making intricate connections. Electronically temperature controlled. ESD safe
antistatic cord and handle. Comes with LTB tip and KH25P stand.
WSB150
SOLDER BATH
(Order no. 0052704299)
The WSB150 solder bath is ideally suited to tin coating and preparation of
soldering components. The heat output is 150W / 24V and the adjustable
temperature range is 150°F – 999°F (66°C - 537°C). When operating with
dual power units WD2 or WD2M, the second port is disabled. Bath dimensions
2.28" x 1.30" x 0.748" depth (58 mm x 33 mm x 19 mm depth).
FE75
FUME EXTRACTION SOLDERING PENCIL
(Order no. 0052916699)
80W / 24V soldering pencil with integral fume extraction assembly. Compatible
with any 80 watt power unit and WFE2P self-contained fume extraction system.
Temperature is adjustable from 150°F to 850°F (66°C to 454°C). Includes a 5 mm
cylinder brush for cleaning and a funnel for support when not in use. Uses LT
series tips and comes with LTB tip.
SOLDERING
STATIONS
20
ACCESSORIES
MIX AND MATCH TO BUILD YOUR OWN CUSTOM SOLUTION
See page 17 to determine accessory and power unit compatibility
WSP80
80 WATT SOLDERING PENCIL
A micro soldering pencil, 80 W/24V. This soldering pencil can be universally
used in all situations from extremely delicate soldering to those where there
is a greater temperature requirement. Use with WDH10 support
(Order no. 0051512199) or WDH10T "Stop and Go" support
(Order no. 0051516199). Comes with LTB tip.
WP80
80 WATT SOLDERING PENCIL WITH SHORT GRIP
(Order no. 0052918099)
A micro soldering pencil, 80W / 24V. Similar in use and performance to the
WSP80. Comes with a short barrel grip so you can get close to the work.
Optional longer grip (Order no. 0058744846) is available. Use with
WDH10 support (Order no. 0051512199) or WDH10T "Stop and Go"
support (Order no. 0051516199). Comes with LTB tip.
WMP
MICRO SOLDERING PENCIL
The 65W / 24V pencil is up to the task with superior performance for both
heat-up and thermal efficiency. Suitable to handle all micro components
and fine pitch tasks. The WMP provides an extremely short tip-to-grip
distance. The heater is integrated into the handle. When the tip wears
out, the heating element lives on. Use with WDH20 support (Order
no. 0051512299) or WDH20T "Stop and Go" support (Order No.
0051516299). Comes with NT1 tip.
WMRP
MICRO SOLDERING PENCIL
(Order no. 0052917199)
The WMRP soldering pencil has an extremely short heat-up time. All component
parts of the system, such as the sensor and heating element, are designed
for optimum heat transfer. This ensures absolute efficiency in the utilization of
the power provided by the power unit. Changing soldering tips is quick, easy,
and requires no tools. Use with WDH50 support (Order no. 0051515699).
Comes with RT3 tip.
Ř:05306PLOVSHFYHUVLRQ2UGHUQR
tip not included. See page 15 for RTMS tips.
WES51
ANALOG SOLDERING STATION
THE WELLER ADVANTAGE:
A powerful and economical continuous production soldering station,
this unit has temperature lockout and automatic power-down
features to keep you in control.
Slim, comfortable pencil
reduces operator fatigue
FEATURES AND BENEFITS:
NDesigned for continuous production, rework, and repair of through hole,
SMT boards, most ground planes, and light to medium layer boards
NWireless temperature lockout prevents operator from raising temperature to
levels higher than specified for the board or component (PW50 lockout probe)
NStation automatically powers down after 99 minutes of inactivity to prolong
tip life and save power
NPencil is fitted with non-burnable silicone rubber cord for added safety
NPencil uses ET series tips found on page 23
Wireless temperature lockout gives
you control over the process.
Components and Specifications:
WES51PU Power Unit
Voltage 120 V (input); 24 V (output)
Temperature Range 350° F - 850° F (176° C - 450° C)
Dimensions 5.9 x 4.5 x 3.6 in. (150 x 114 x 91 mm)
Temperature Accuracy +/- 17° F (+/-9° C)
Temperature Stability +/- 10° F (+/-6° C)
ESD Safe Yes
PES51 Pencil
Power Consumption 50 W
Heating Element Type Nichrome Wound; Fiberglass
and Ceramic Insulated
Cord Length 4 ft. (1.22 m)
Supplied Tip ETA
Supplied Stand PH50 with TC205 Sponge
SOLDERING
STATIONS
21
Wireless lockout limits
maximum temperature
SOLDERING
STATIONS
22
WESD51
DIGITAL SOLDERING STATION
THE WELLER ADVANTAGE:
A powerful and economical continuous production soldering station,
this unit has temperature lockout, automatic power-down
features, and a digital display to keep you in control.
FEATURES AND BENEFITS:
NDesigned for continuous production, rework, and repair of through hole,
SMT boards, most ground planes, and light to medium layer boards
NWireless temperature lockout prevents operator from raising temperature to levels
higher than specified for the board or component (PW50 lockout probe)
NDigital readout allows quick and accurate temperature control
NStation automatically powers down after 99 minutes of inactivity to prolong
tip life and save power
NPencil is fitted with non-burnable silicone rubber cord for added safety
NPencil uses ET series tips found on page 23
Components and Specifications:
WESD51PU Power Unit
Voltage 120 V (input); 24 V (output)
Temperature Range 350° F - 850° F (176° C - 450° C)
Dimensions 5.9 x 4.5 x 3.6 in. (150 x 114 x 91 mm)
Temperature Accuracy +/- 17° F (+/-9° C)
Temperature Stability +/- 10° F (+/-6° C)
ESD Safe Yes
PES51 Pencil
Power Consumption 50 W
Heating Element Type Nichrome Wound; Fiberglass
and Ceramic Insulated
Cord Length 4 ft. (1.22 m)
Supplied Tip ETA
Supplied Stand PH50 with TC205 Sponge
Wireless temperature lockout gives
you control over the process.
Digital readout for
accurate temperature
control
Slim, comfortable pencil
reduces operator fatigue
Wireless lockout limits
maximum temperature
SOLDERING
STATIONS
23
TIPS
ET SERIES TIPS FOR PES50/51 AND EC1201 SERIES
SOLDERING PENCILS - TINNED WITH LEAD FREE SOLDER
THE WELLER ADVANTAGE:
The sensor hole in the base of the tip is fitted with a stainless steel liner
to prevent the tip from seizing to the sensor.
SCREWDRIVER A B C
Cat No. IN. MM IN. MM IN. MM
ETA* 0.062 1.60 0.032 0.81 0.625 15.90
ETB* 0.093 2.40 0.020 0.51 0.625 15.90
ETC* 0.125 3.20 0.027 0.69 0.625 15.90
ETD 0.187 4.80 0.035 0.89 0.625 15.90
ETH 0.031 0.80 0.019 0.48 0.625 15.90
LONG SCREWDRIVER A B C
Cat No. IN. MM IN. MM IN. MM
ETJ 0.031 0.80 0.012 0.30 1.000 25.40
ETK* 0.046 1.20 0.026 0.66 1.000 25.40
ETL 0.078 2.00 0.027 0.69 1.000 25.40
ETM 0.125 3.20 0.037 0.94 1.000 25.40
NARROW SCREWDRIVER A B C
Cat No. IN. MM IN. MM IN. MM
ETR 0.062 1.60 0.044 1.12 0.625 15.90
CONICAL A B C
Cat No. IN. MM IN. MM IN. MM
ETP* 0.031 0.80 0.012 0.30 0.625 15.90
ETT 0.024 0.60 0.036 0.91 0.625 15.90
LONG CONICAL A B C
Cat No. IN. MM IN. MM IN. MM
ETO* 0.031 0.80 0.044 1.12 1.000 25.40
ETS* 0.015 0.40 -- -- 1.000 25.40
SINGLE FLAT A B C
Cat No. IN. MM IN. MM IN. MM
ETAA 0.062 1.60 0.040 1.02 0.625 15.90
ETBB 0.093 2.40 0.032 0.81 0.625 15.90
ETCC 0.125 3.20 0.032 0.81 0.625 15.90
ETDD 0.187 4.80 0.032 0.81 0.625 15.90
ETU 0.015 0.40 -- -- 0.700 17.80
ETV 0.024 0.60 -- -- 0.700 17.80
KNIFE A B C
Cat No. IN. MM IN. MM IN. MM
ETKN 0.180 4.57 0.064 1.63 0.625 15.90
* Indicates available bulk (100 multiples only)
SOLDERING
STATIONS WTCPT
TEMPERATURE CONTROLLED SOLDERING STATION
THE WELLER ADVANTAGE:
Three tip-dependent temperature options provide maximum control and make this
unit perfect for repetitive, basic production, rework and repair applications.
FEATURES AND BENEFITS:
NUnique closed loop temperature control
NFerromagnetic sensor in tip controls temperature, so no adjustment is required
NMost tips available in three standard temperature ranges (600˚ F, 700˚ F, 800˚ F)
for maximum control
NLighted rocker switch indicates on-off status
NPencil uses PT series tips found on page 25
Components and Specifications:
PU120T Power Unit
Voltage 120 V (input); 24 V (output)
Power Consumption 60 W
Temperature Range 600°F; 700°F; 800°F (316°C; 371°C; 427°C)
Dimensions 5.9 x 4.5 x 3.6 in. (150 x 114 x 91 mm)
ESD Safe Yes
TC201T Pencil
Power Consumption 42 W
Heating Element Type Nichrome Wound, Plug-in
Cord Length 4 ft. (1.22 m)
Supplied Tip PTA7
Supplied Stand PH1201ESD
Sponge TC205
24
Ferromagnetic sensor in
tip controls temperature
Lighted on-off
rocker switch
SOLDERING
STATIONS
25
TIPS
PT SERIES TIPS FOR TC201/TCP SERIES SOLDERING PENCILS.
TINNED WITH LEAD FREE SOLDER
SCREWDRIVER Catalog Numbers A B C
600° 700° 800° IN. MM IN. MM IN. MM
PTH6 PTH7 PTH8 0.031 0.79 0.019 0.48 0.62 15.87
PTA6 PTA7* PTA8* 0.062 1.57 0.032 0.81 0.62 15.87
-- PTB7* PTB8* 0.093 2.38 0.020 0.51 0.62 15.87
-- PTC7* PTC8* 0.125 3.17 0.027 0.69 0.62 15.87
-- PTD7 PTD8* 0.187 4.74 0.035 0.89 0.62 15.87
-- -- PTE8 0.234 5.95 0.042 1.07 0.62 15.87
LONG SCREWDRIVER Catalog Numbers A B C
600° 700° 800° IN. MM IN. MM IN. MM
-- PTJ7 PTJ8 0.031 0.79 0.012 0.30 1.00 25.40
-- PTK7* PTK8 0.046 1.19 0.026 0.66 1.00 25.40
-- PTL7 PTL8 0.078 1.98 0.027 0.69 1.00 25.40
-- PTM7 PTM8 0.125 3.17 0.037 0.94 1.00 25.40
NARROW SCREWDRIVER Catalog Numbers A B C
600° 700° 800° IN. MM IN. MM IN. MM
PTR6 PTR7 PTR8 0.062 1.58 0.044 1.12 0.62 15.87
SINGLE FLAT Catalog Numbers A B C
600° 700° 800° IN. MM IN. MM IN. MM
-- PTAA7 PTAA8 0.062 1.57 0.040 1.42 0.62 15.87
-- PTBB7 PTBB8 0.093 2.38 0.032 0.81 0.62 15.87
-- PTCC7 PTCC8 0.125 3.17 0.032 0.81 0.62 15.87
-- PTDD7 PTDD8 0.187 4.74 0.032 0.81 0.62 15.87
CONICAL Catalog Numbers A B C
600° 700° 800° IN. MM IN. MM IN. MM
PTP6 PTP7* PTP8* 0.031 0.79 0.012 0.30 0.62 15.87
LONG CONICAL Catalog Numbers A B C
600° 700° 800° IN. MM IN. MM IN. MM
-- PTS7 PTS8 0.015 0.39 -- -- 1.00 25.40
PTO6 PTO7* PTO8* 0.031 0.79 0.044 1.12 1.00 25.40
CONICAL FLAT Catalog Numbers A B C
600° 700° 800° IN. MM IN. MM IN. MM
-- PTF7 PTF8 0.047 1.19 0.033 0.84 0.62 15.87
* Indicates available bulk (100 multiples only)
REWORK
STATIONS WDD81X
DIGITAL SHOP AIR DESOLDERING STATION
THE WELLER ADVANTAGE:
With 80 watts of power, this shop air system handles
even the heaviest ground planes and multi-layer boards
quickly, reducing the risk of component damage.
FEATURES AND BENEFITS:
NVacuum delay feature allows solder to reach the collection chamber
before vacuum is shut off to avoid clogging
NDigital process control allows exact temperature set for added control
NOptional WCB1 control module provides temperature lock-out
for process control, temperature set-back for extended tip life,
and ° F to ° C conversion
NDXV80 pencil uses DX series desoldering tiplets found on page 32
26
The new patented threadless DX
desoldering tiplets will not seize
to the heater.
NEW Disposable solder trap
on the DXV80 makes clean out
quick and easy
DSX80 Desoldering Iron 80 W / 24 V
(Order no. 0051319099) DSX80 with
WDH30 stand (Order no. 0051318399)
(optional accessory)
Components and Specifications:
Power Unit
Voltage 120 V (input); 24 V (output)
Power Consumption 95 W
Temperature Range 150° F - 850° F (50° C - 450° C)
Dimensions 7.1 x 4.51 x 4 in. (180 x 115 x 101 mm)
Pump Type Compressed air / venturi converter
Vacuum Pressure 21 in. HG (0.8 Bar)
Temperature Stability +/- 10° F (+/-6° C)
ESD Safe Yes
DXV80 Pencil (Order No. 0051318099)
Power Consumption 80 W
Heating Element Type Nichrome Wound
Cord Length 4 ft. (1.22 m)
Supplied Tiplet DX112
Solder Collection Tubes 0058741815
Supplied Stand WDH40 (Order No. 0051515399)
Sponge Order No. 0052241999
REWORK
STATIONS
27
WR2
WR2000X
DIGITAL SELF-CONTAINED 2-CHANNEL REWORK STATION
WR2 DIGITAL REWORK STATION WITH DXV80 DESOLDERING PENCIL
AND WDH40 TOOL STAND
THE WELLER ADVANTAGE:
The extremely capable WR2 has the power to efficiently repair state-of-the-art
electronic subassemblies and the versatility to serve as the foundation for several
other Weller rework and repair products.
FEATURES AND BENEFITS:
NSelf-contained air and vacuum
NEconomy (ECO) button for "sleep mode"
NProgrammable temperature presets for immediate
temperature selection
N2 independent tool channels with automatic tool recognition
NSimultaneous use of 2 tools (up to maximum 300 W
power rating of the unit)
N ESD safe
FEATURES AND BENEFITS:
NAll features and benefits of the
WR2 above, plus...
NDXV80 80-watt desoldering pencil uses
DX series desoldering tiplets found on
page 32
NNEW Disposable solder trap on the DXV80
makes cleanout quick and easy
Order No. Model Description
0051318099 DXV80 Desoldering iron 80 W / 24 V
with DX112 desoldering tiplet
0051515399 WDH40 Safety rest
Components and Specifications:
Dimensions L x W x H (inches): 10.75 x 9.25 x 4.02 in.
(273 x 235 x 102 mm)
Power supply voltage 120 V (input); 24 V (output)
Power consumption 300 Watts
ESD Safe Yes
Temperature range 150°F – 850°F (50°C - 450°C)
Pump Type Rotary Vane
Air Volume Hot Air 10 l/min
Vacuum Pressure 0.7 bar (20.7 in/Hg)
Temperature accuracy ± 17° F (± 9° C)
Temperature stability ± 10° F (± 6° C)
Components and Specifications:
Same as WR2 above
Note: Not compatible with Weller Micro-Tools, WMRP/WMRPMS and WMRT/WMRTMS
Note: Not compatible with Weller Micro-Tools, WMRP/WMRPMS and WMRT/WMRTMS
DXV80 with
disposable
solder trap
REWORK
STATIONS
28
WR2000VX
SELF CONTAINED SOLDER / DESOLDER STATION
THE WELLER ADVANTAGE:
Soldering and desoldering pencils, each with 80 watts of power, make this the perfect
station for demanding work on heavy ground planes and multi-layer boards.
FEATURES AND BENEFITS:
NVacuum delay feature
NMicroprocessor with digital read-out for complete
accuracy and reliability
NHigher power means less time spent on the PCB, reducing risk
of component damage
NProgrammable temperature setback
NWP80 pencil uses LT series tips found on page 5
NDXV80 pencil uses DX series desoldering tiplets found on page 32
NEW Disposable solder
trap on the DXV80
makes cleanout
quick and easy
Components and Specifications:
Dimensions L x W x H (inches): 10.75 x 9.25 x 4.02 in.
(273 x 235 x 102 mm)
Power supply voltage 120 V (input); 24 V (output)
Power consumption 300 Watts
ESD Safe Yes
Temperature range 150°F – 850°F (50°C - 450°C)
Pump Type Rotary Vane
Air Volume Hot Air 10 l/min
Vacuum Pressure 0.7 bar (20.7 in/Hg)
Temperature accuracy ± 17° F (± 9° C)
Temperature stability ± 10° F (± 6° C)
Order No. Model Description
0053377699 WR2 Power unit, 300 W
0052918099 WP80 Soldering iron 80 W fitted with
LTB soldering tip
0051515299 WDH10 Safety rest
0051318099 DXV80 Desoldering iron 80 W / 24 V fitted with
DX112 desoldering tiplet
0051515399 WDH40 Safety rest
REWORK
STATIONS
29
WR3000M
DIGITAL REWORK AND REPAIR SYSTEM
THE WELLER ADVANTAGE:
Automatic tool detection with three tool channels, the widest variety of tool options,
and 400 watts of power give this system the versatility to meet your most demanding
application requirements on the production line or in the lab.
Components and Specifications:
Dimensions L x W x H (inches): 10.75 x 9.25 x 4.02
Weight Approximately 14.8 lbs.
Power supply voltage 120 VAC, 60 Hz
Power consumption 400 Watts
ESD Safe All Tool Handles, Cordsets and Air Flow are Static Free
Fuse 4 Amp
Temperature control range Variable in (1) degree increments from 150°F – 999°F
Controllable temperature range is tool-dependent
Temperature accuracy ± 17°F (Average tip temperature can be
offset ± 9°F at idle with no load)
Temperature stability ± 9°F
Hot Air / Vacuum Pump Max. vacuum 0.7 bar
(duty cycle: 30 seconds Max. delivery rate 18 l/min
on, 30 seconds off) Hot air max. 15 l/min
Max. vacuum 0.5 bar
Vacuum Pick-up Pump
(duty cycle: 60 seconds
on, 30 seconds off) Max. delivery rate 1.7 l/min
FEATURES AND BENEFITS:
N3 tool channels with automatic tool detection
NLarge LCD screen clearly displays tip temperature and other critical information
NSelf-contained with internal vacuum for maximum portability
N Mini USB port for supplied software connectivity allowing for monitoring and data logging
N All high-speed micro-tools can be used
N Versatile but simple to use
N Static Free Air
NWR3000M complete with WR3M 400W power supply, DXV80 desoldering iron with WDH40 stand, WP80
soldering iron with WDH10T Stop & Go stand, WVP vacuum pick up, nozzle adapter for HAP200 hot-air
pencil, CD with USB Software and operating instructions, USB cable, nozzle replacement tool, R04 (Order
No. 0058727821) and R06 (Order No. 0058727822) hot gas nozzles, DX112 and DX113 desoldering tiplets,
desoldering cleaning tools, brush, spare filters and color-coded clips for easy tool identification
REWORK
STATIONS
30
Part No. Order No. Tip Supplied /
Description
WSP80 WSP80 LTB Tip
WP80 0052918099 LTB Tip
WMP WMP NT1 Tip
WMRP 0052917199 RT3 Tip
WMRPMS 0052919299 RTMS Tips,
No Tip Supplied
WMRT 0051317299 RTW2 Tip,
Cartridge
WMRT-MS 0052919299 RTWMS Tips,
No Tip Supplied
WTA50 0051317199 WTA1 Tip
WSP150 0052917099 LHTF Tip
WP120 0052919399 XTB Tip
ACCESSORIES
OPTIONAL TOOLS FOR REWORK SYSTEMS
REWORK
STATIONS
31
Part No. Order No. Tip Supplied /
Description
WP200 0052920099 XHTD TIP
MPR80 0053313199 LTB Tip
FE75 0052916699 LTB Tip
WHP80 0052702899 Hot Plate,
3.2” X 2”
WSB80 0052704099 80 Watt,
Solder Bath
WSB150 0052704299 150 Watt,
Solder Bath
HAP200 0052711799 200 Watt,
0058727821 1.2 mm Nozzle
0058727822 3.0 mm Nozzle
HAP1 0053311499 100 Watt,
0058727821 1.2 mm Nozzle
0058727822 3.0 mm Nozzle
DXV80 0051318199 DX112 Tiplet
DSX80 0051319099 DX112 Tiplet
REWORK
STATIONS
32
A
Cat No. Order No. IN. MM
WTA1 0054414199 0.039 1.00
WTA2 0054414699 0.118 3.00
WTA3 0054414799 0.236 6.00
THERMAL TWEEZERS TIPS
A
Cat No. Order No. IN. MM
WTA4 0054414399 0.492 12.50
WTA5 0054414499 0.728 18.50
THERMAL TWEEZERS TIPS
THERMAL TWEEZER TIPS
WTA SERIES TIPLETS FOR WTA50 THERMAL TWEEZERS.
TINNED WITH LEAD FREE SOLDER
A (O.D.) B (I.D.) C
Cat No. Order No. IN. MM IN. MM IN. MM
DX110 0051314099 0.075 1.90 0.028 0.70 0.325 18.00
DX111 0051314199 0.098 2.50 0.028 0.70 0.325 18.00
DX112 0051314299 0.091 2.30 0.039 1.00 0.325 18.00
DX113 0051314399 0.098 2.50 0.047 1.20 0.325 18.00
DX113HM 0051315099 0.098 2.49 0.047 1.19 0.906 23.00
High Mass Tiplet
DX114 0051314499 0.130 3.30 0.071 1.80 0.325 18.00
DX115 0051314599 0.075 1.90 0.028 0.70 0.325 18.00
DX116 0051314699 0.106 2.70 0.047 1.20 1.142 29.00
DX117 0051314799 0.114 2.90 0.059 1.50 0.906 23.00
DX118 0051314899 0.059 1.50 0.058 0.71 0.906 23.00
DX119 0051315199 0.043 1.10 0.028 0.71 1.22 31.00
Non-Wetting Tiplet
DX120 0051315299 0.098 2.49 0.043 1.09 0.866 22.00
Pad Cleaning Tiplet
DESOLDERING TIPLETS
DX SERIES TIPLETS FOR DS80 AND DSV80
REWORK
STATIONS
A B
Cat No. IN. MM IN. MM
0058727823 0.031 0.80 -- --
0058727821 0.047 1.20 -- --
0058727787 0.098 2.50 -- --
0058727822 0.118 3.00 -- --
ROUND
A B
Cat No. IN. MM IN. MM
0058727786 0.079 2.00 -- -
ROUND BENT
A B
Cat No. IN. MM IN. MM
0058727782 0.394 10.00 0.512 13.00
0058727781 0.394 10.00 0.591 15.00
0058727784 0.394 10.00 0.709 18.00
0058727779 0.413 10.50 0.413 10.50
2-SIDES HEATED
A B
Cat No. IN. MM IN. MM
0058727777 0.236 6.00 0.256 6.50
0058727778 0.236 6.00 0.354 9.00
0058727780 0.394 10.00 0.591 15.00
0058727783 0.492 12.50 0.591 15.00
0058727785 0.709 18.00 0.709 18.00
4-SIDES HEATED
A B
Cat No. IN. MM IN. MM
0058727774 0.059 1.50 0.315 8.00
0058727773 0.059 1.50 0.394 10.00
0058727772 0.059 1.50 0.472 12.00
FLAT
HOT AIR NOZZLES
NOZZLES FOR HAP1 / HAP200 HOT AIR PENCILS
33
* HAP200 Requires M6 Nozzle Adapter (Order No. 0058761728)
HOT AIR
STATIONS
34
WHA3000PS
DIGITAL HOT AIR REWORK SYSTEM
THE WELLER ADVANTAGE:
This station has high-end versatility to meet your most demanding rework
challenges, including repair of fine-pitch components on densely-packed boards.
WBHS Circuit Board Holder with Tool Stand
Order No. 0053316599
(See Page 36 of this catalog for specifications)
WHP3000 Heating Plate
(See Page 36 of this catalog for specifications)
WHA3000PS Components & Specifications:
WHA3000P Power Unit
Voltage 120V (Input)
Power Consumption 700 W
Temperature Range 150° F – 999° F (50° C – 550° C)
Dimensions 9.5 x 10.6 x 6.7 in. (240 x 270 x 170 mm)
Pump Type Maintenance-free Rotary Vane
Vacuum Pressure -0.6 bar
Air Flow Volume 5 l/min. – 50 l/min.
Temperature Accuracy +/- 54° F (+/- 30° C)
ESD Safe Yes
WHA3000P
700-watt hot air station features patented Weller nozzle
technology for maximum process control and user friendly
operation, plus a powerful variable speed-controlled turbine
for an air volume of up to 50 liters/min
WBHS
Circuit board holder with hot air pencil stand holds the HAP3 hot air
pencil perpendicular to the printed circuit board under repair, raises and
lowers it precisely onto the component being reworked.
WHP3000
Positioned beneath the WBHS circuit board holder,
this IR heating plate preheats circuit board under
repair to reduce possibility of thermal damage.
FEATURES AND BENEFITS:
N700 watts of power allow work on larger
dual in line and quad pack components
NAn ion trap assures that only ESD safe hot air is directed
at the component
NMemory to store up to 10 thermal profiles ensures
process repeatability
NHolds circuit boards up to 310 mm x 320 mm for outstanding versatility
NIR heating plate has a total heated area of 120 mm x 190 mm
with 3 ceramic elements for controlled, even heat.
NSet and read temperatures are digitally displayed
NAn external sensor can be connected to display actual temperatures
at specific areas of the circuit under repair to further guard against
damage to sensitive components
NThe hot plate can be controlled from its own independently
or integrated into the control system of the WHA3000P
or WHA3000V
NThree position foot switch: OFF – HOT AIR – VACUUM
NSelf contained internal air and vacuum
NSystem includes a 0.669" x 0.925" (17.0mm x 23.5mm) hot air nozzle
(Order no. 0058750721) For full range of hot air nozzles, see page 41
HOT AIR
STATIONS
35
HOT AIR
STATIONS
36
WHA3000PS
COMPONENTS AND ACCESSORIES
Components & Specifications
WBHS
Dimensions 12.6 x 17.6 x 17.3 in. (320 x 446 x 440 mm)
Order No. 0053316599
WBH
Dimensions 12.6 x 17.6 x 3.9 in. (320 x 446 x 100 mm)
Order No. 0053316499
WHP3000
Voltage 120 V
Power Consumption 200 W (small heating zone);
600 W (large heating zone)
Temperature Range 150° F – 750° F (50° C – 400° C)
Dimensions 10.0 x 15.6 x 2.8 in. (254 x 395 x 70 mm)
ESD Safe Yes
Accessories
0058754873 Adjustable circuit board stop
0058755745 Support for large circuit boards
0058755741 Circuit board clamp
0058754924 Clamp set for irregular-shaped circuit boards
(mobile phones, digital cameras, etc.)
WBHS
CIRCUIT BOARD HOLDER AND TOOL STAND
NHolds circuit boards up to 310 mm x 320 mm for outstanding versatility
NPrecision glides allow board to be precisely positioned and secured at any point
along the X and Y axes
NAccommodates both single and double sided boards
NHolds PCBs totally flat for added precision and repeatability
NTool holder positions hot air pencil perpendicular to the PCB
NSmooth-acting lever raises and lowers the tool precisely onto the component
1.4 in. (35 mm) along the Z axis
WBH CIRCUIT BOARD HOLDER (not shown)
Same as WBHS, but without tool holder
WHP3000
INFRARED HEATING PLATE
NReduces risk of thermal damage by providing controlled, even heat
NSet and read temperatures digitally displayed for added control of process
NOptional Type K thermocouple can be connected to display actual temperatures
at specific areas of the circuit under repair to further guard against damage
to sensitive components
NCan be used alone or beneath WBHS or WBH circuit board holders
NCan be controlled independently, or can be integrated into the control system
of either the WHA3000P or the WHA3000V
0058754873
0058755741
0058755745
0058754924
WBHS
CIRCUIT BOARD HOLDER AND TOOL STAND
WHA3000P
DIGITAL HOT AIR STATION
THE WELLER ADVANTAGE:
This 700-watt hot air station has advanced features for unsurpassed process
control and a quiet, yet powerful internal air source for maximum portability.
FEATURES AND BENEFITS:
NSelf-contained bench-top unit – no external air source required
NCapable of performing demanding repair tasks on PCBs with
complex fine pitch surface mounted components
NSet and read temperatures are digitally displayed
NAutomatic mode allows up to ten separate programs to be stored
in memory, each with a unique air temperature / air volume / process
time profile for the ultimate in control and process repeatability
NSpecial ionizing circuit assures hot air is static-free to protect
sensitive components
NOptional nozzle change tool allows quick changeout of nozzles,
even when hot
NWorks with optional Type K thermocouple to measure temperature
on specific area of PCB for more precise process monitoring
NThree position foot switch: OFF–HOT AIR–VACUUM
NSystem includes a 0.669" x 0.925" (17.0mm x 23.5mm) hot air nozzle
(Order no. 0058750721) Hot air pencil accepts wide range of patented
technology nozzles for maximum versatility, see page 41
WHA3000P Components & Specifications
Power Unit
Voltage 120 V
Power Consumption 700 W
Temperature Range 150° F – 999° F (50° C – 550° C)
Dimensions 9.5 x 10.6 x 6.7 in. (240 x 270 x 170 mm)
Pump Type Rotary Vane
Vacuum Pressure - 0.6 Bar
Air Flow Volume 5 l/min. – 50 l/min.
Temperature Accuracy +/- 54° F (+/- 30° C)
ESD Safe Yes
Similar to the WHA3000P, except without internal
turbine air source; uses compressed air or inert gas
WHA3000V
Accessories for WHA3000P and WHA3000V
0051504999 Nozzle change tool
0058755782 0.10 mm Type K external sensor
0053119099 0.50 mm Type K external sensor
0051504899 Stand for hot air nozzles
“Stop and Go” tool holder automatically
switches hot air pencil to “standby” mode,
reducing air flow but maintaining operating
temperature
HOT AIR
STATIONS
37
HOT AIR
STATIONS
38
WHA900
SELF CONTAINED HOT AIR REWORK STATION
THE WELLER ADVANTAGE:
The WHA900 has a closed loop feedback that continuously monitors
and controls the temperature. Set it once and forget it.
FEATURES AND BENEFITS:
NTemperature and air flow setback can be pre-selected by the user
NClosed loop feedback continuously adjusts heat output
NHot air hand piece uses WHA nozzles found on page 41
Patented Weller nozzle technology safely
removes surface mount components.
Nozzle not included.
WHA900 Components and Specifications:
Power Unit
Voltage 120 V (input); 120 V (output)
Power Consumption 750 W
Temperature Range 150° F – 1000° F or 50° C – 550° C
Dimensions 8.125 x 6.625 x 4.25 in. (206 x 168 x 108 mm)
Pump Type Turbine
Air Flow Volume 5 l/min. – 50 l/min.
Temperature Accuracy +/- 54° F (+/- 30° C)
ESD Safe Yes
Closed-loop
temperature control Yes
Air from internal pump
is adjustable from
5 L/min. to 50 L/min.
Hot air temperature
is adjustable from
100ºF to 1,000ºF
(50ºC to 550ºC)
Power-on LED indicator
Power
ON/OFF
switch
Hot air ON/OFF and
temperature/airflow
setback control
HOT AIR
STATIONS
39
WR2000
DIGITAL SELF CONTAINED HOT AIR REWORK STATION
THE WELLER ADVANTAGE:
Digital microprocessor control and an internal air and vacuum source give this 300-watt
dual channel rework station amazing performance and versatility.
FEATURES AND BENEFITS:
NSelf-contained air and vacuum
NEconomy (ECO) button for "sleep mode"
NProgrammable temperature presets for immediate
temperature selection
N2 independent tool channels with automatic tool recognition
NSimultaneous use of 2 tools (up to maximum 300 W
power rating of the unit)
N ESD safe
NHot air pencil uses HAP series nozzles found on page 33
LCD display
shows set and
read temperatures
Components and Specifications:
Order No. Model Description
WR 2 WR 2 Power unit, 300 W
0052711599 HAP 1 Hot air pencil 100 W / 24 V fitted
with 3.0 round nozzle
0051515299 WDH 30 Safety rest
HOT AIR
STATIONS
40
WAD101
DIGITAL COMPRESSED AIR HOT AIR STATION
THE WELLER ADVANTAGE:
Digital microprocessor control and the ability to use external compressed air
or gas give this 100-watt hot air station amazing performance and versatility.
FEATURES AND BENEFITS:
NPowerful (100-watt) HAP1 pencil precisely delivers hot air to
small SMT parts, reducing the risk of damage to adjacent components
NFinger-activated hot air switch on pencil provides exceptional control
NDigital temperature control has easy-to-read LED display for fast
and accurate temperature set
NOptional WCB1 programming module provides temperature lock-out
for process control, temperature set-back for extended tip life,
and ° F to ° C conversion
NHot air pencil uses HAP nozzles found on page 33
WAD101 Components and Specifications:
Power Unit
Voltage 120 V (input); 24 V (output)
Power Consumption 100 W
Temperature Range 150° F – 999° F or 50° C – 550° C
Dimensions 4.5 x 5.9 x 3.6 in. (114 x 150 x 91 mm)
Air Flow Volume 1 l/min. – 6 l/min.
Temperature Accuracy +/- 54° F (+/- 30° C)
ESD Safe Yes
HAP1 Pencil
Power Consumption 100 W
Heating Element Type Nichrome wound;
fiberglass and ceramic insulated
Cord Length 4 ft. (1.22 m)
ESD Safe Yes
Supplied Nozzle 1.2mm nozzle (Order No. 0058727821)
Supplied Stand KH 27
Digital display shows
set and actual
temperatures
Analog dial for manual
control of hot air flow
NOZZLES
FOR WHA SERIES STATIONS
( ) Denotes Make To Order. Contact us for a quote and lead-time.
HOT AIR
STATIONS
41
A B
Cat No. IN. MM IN. MM
0058736881 0.098 2.50 -- --
0058736867 0.157 4.00 -- --
0058736870 0.276 7.00 -- --
0058736836 0.453 11.50 -- --
ROUND (NO VACUUM)
A B
Cat No. IN. MM IN. MM
0058736882 0.059 1.50 -- --
ROUND BENT (NO VACUUM)
A B
Cat No. IN. MM IN. MM
0058736883 0.098 2.50 0.374 9.50
ROUND DUAL (NO VACUUM)
A B
Cat No. IN. MM IN. MM
0058736840 0.583 14.80 0.846 21.50
0058736842 0.394 10.00 0.551 14.00
0058736843 0.421 10.70 0.421 10.70
0058736841 0.472 12.00 0.748 19.00
0058736876 0.472 12.00 1.063 27.00
0058736857 1.496 38.00 1.496 38.00
0058736873 1.575 40.00 1.575 40.00
2-SIDES HEATED
A B
Cat No. IN. MM IN. MM
0058736839 0.433 11.00 0.433 11.00
0058736818 0.583 14.80 0.583 14.80
0058736814 0.709 18.00 0.709 18.00
0058736807 0.807 20.50 0.807 20.50
0058736804 1.024 26.00 1.024 26.00
0058736833 1.260 32.00 1.260 32.00
0058736891 1.417 36.00 1.417 36.00
0058736890 1.693 43.00 1.693 43.00
0058736838 0.394 10.00 0.571 14.50
0058736880 0.472 12.00 0.945 24.00
0058736837 0.512 13.00 0.610 15.50
0058736892 0.551 14.00 1.063 27.00
0058750721 0.669 17.00 0.925 23.50
0058736877 0.669 17.00 1.142 29.00
0058736998 0.906 23.00 1.398 35.50
0058736999 1.201 30.50 1.909 48.50
0058736858 1.260 32.00 1.732 44.00
0058750709 1.496 38.00 1.909 48.50
0058750714 1.496 38.00 2.402 61.00
4-SIDES HEATED
A B
Cat No. IN. MM IN. MM
0058736819 -- -- -- --
ROUND DUAL (ADAPTER)
Description
Cat. No. I.D. O.D.
W58713798 Ø.6 mm stem / Ø 10 mm cup (10 pcs.)
W58713799 Ø.3 mm stem / Ø 4.5 mm cup (10 pcs.)
CSF REPLACEMENT RUBBER INSERTS
HOT AIR
STATIONS
42
WHP200
200 WATT IR PRE HEATER
THE WELLER ADVANTAGE:
The WHP200 is a small, powerful, infrared preheater designed to minimize the risk of
thermal damage and to speed up the repair process on small multilayer PCBs.
FEATURES AND BENEFITS:
NSuitable for use with a range of consumer electronic boards. It is perfect for rework
operations on digital camera, mobile phone, MP3 player, and PDA PCBs
NThe infrared plate provides fast, precisely controlled heating to create an even
substrate temperature
NSimple to use, with very easy adjustment for the heating temperature
NHeating plate comes complete with a PCB board holder so there is no need
to buy additional accessories
NSet and read temperatures digitally displayed for added process control
WHP200 Components and Specifications:
Power Unit
Dimensions (L x W x H)
incl. pcb holder 7.6 x 7.6 x 3.3 inch (193 x 193 x 84 mm)
Dimensions Heating Zone
(L x W) 4.72 x 2.36 inch (120 x 60 mm)
Voltage 120 V / 50/60 Hz
Power Heat Zone 200 W, Medium Wave Infrared
Temperature Range 150°F – 750°F (50°C – 400°C)
HOT AIR
STATIONS
43
WHP1000
DIRECT CONTACT PREHEATER
THE WELLER ADVANTAGE:
The WHP1000 is a high power preheater that is suitable for contact preheating.
Use it under a board holder, or simply place your work directly on the working
surface. The WHP1000 is well suited for use with flat silicon cells as well as
ceramic and glass printed circuit boards.
FEATURES AND BENEFITS:
NAllows the temperature of the board’s substrate material to be raised to the correct
working temperature, ensuring perfect soldering operations without the risk of damage
from thermal shock to the board
NLarge 8.75 x 6.00 inch pre-heating area with even heat distribution
NFour heating elements allow electronic assemblies to be pre-heated in a variety of ways
NDigitally controlled electronics ensure precise temperature regulation and support special
functions such as “Auto Off” and “Standby Temperature”. Set and actual temperatures can
be viewed on the digital display
NAn insulated Type K thermocouple (optional) can be used to monitor the temperature at specific
locations on the board (0.5mm, Order no. 0053119099), (0.1mm MTO, Order no. 0058755782)
NAn integrated RS232 interface enables the device to be controlled externally from
the Weller WHA3000P or WHA3000V
NRoHS Compliant – MIL-SPEC compliant
WHP1000 Components and Specifications:
Power Unit
Dimensions (W x L x H): 10.0 x 11.0 x 2.75 inches
(254 x 280 x 70 mm)
Heating plate 6.0 x 8.75” (150 x 220 mm)
Power supply 120 V / 50/60 Hz
Power 850 W
Temperature range 150°F - 570°F (50°C - 300°C)
ESD Safe Yes
FUME
EXTRACTION
44
ESD safe low sound
level
FEATURES AND BENEFITS:
N Mobile fume extraction unit purifies air at up to eight workstations
N Large F7 pre-filter
N The adjustable pressure control provides optimal air flow regulation for each workstation
N Electronic filter control
N Four wheels to allow easy movement of the unit
N Noise-dampened metal housing
N Quick and simple installation
WFE8S includes:
N Optional wired remote control (Order No. 0058735909)
N PC remote monitoring with optional RS232 interface cable
(Order No. 0053119199) / software included
N WFE8S Fume Extraction Unit 120 V / 50/60 Hz with F7 pre-filter
N Compact filter Consists of: HEPA filter H13, wide band gas filter
(50% active carbon, 50% chemical absorbent)
N Filters must be ordered separately (see page 53)
Fine dust
pre-filter F7
HEPA filter
H13 and
wide band
gas filter
WFE8S
POWERFUL FUME EXTRACTION UNIT
THE WELLER ADVANTAGE:
Its internal pre-filter and automatic airflow control make this high-capacity mobile unit
the perfect choice for long filter life and energy-efficiency in applications with large
amounts of particles, such as lead-free soldering.
WFE8S Specifications:
Maximum capacity 8 workstations; small and
medium sized reflow, wafer,
and other selected equipment
Maximum extraction rate 615 m³/h
Sound level < 55 db (A) at 1 m distance
Operating voltage 120 V / 50/60 Hz
Power input 450 VA
Maximum vacuum 2.800 Pa
Dimensions (L x W x H) 402 x 796 x 1016 mm
15.9 x 31.3 x 40 in.
Weight 68 kg / 150 lb.
Order No. 120V WFE8S
FUME
EXTRACTION
46
WFE2X
MOBILE FUME EXTRACTION UNIT PURIFIES AIR
AT UP TO TWO SOLDERING WORKSTATIONS
THE WELLER ADVANTAGE:
With variable turbine speed and filter change alarm controlled via wired remote, a
compact footprint, and quiet power for up to two workstations, this unit is perfect for
demanding soldering, adhesives, clean room, and laser applications.
ESD safe low sound
level
FEATURES AND BENEFITS:
N Mobile fume extraction unit purifies air at up to two workstations
N Electronic filter monitoring and easy filter exchange
N Remote control with alarm function, noise-dampened
metal housing and quick and simple installation
N Trolley available optional accessory
N Minimized footprint
N Switching power supply fits all global voltages
WFE 2X includes:
N WFE 2X Fume Extraction Unit 100-240 V / 50/60 Hz
N Compact filter Consists of: HEPA filter H13, wide band gas filter
(50% active carbon / 50% chemical absorbent)
N Filters must be ordered separately (see page 53)
WFE2X Specifications:
Maximum capacity 2 workstations
Maximum extraction rate 140 m³/h
Sound level < 52 db (A) at 1 m distance
Operating voltage 100 – 240 V / 50/60 Hz
Power input 100 W
Maximum vacuum 2.300 Pa
Dimensions (L x W x H) 210 x 460 x 660 mm
8.3 x 18.1 x 26 in
Weight 15 kg / 33 lb.
Order No. 120V WFE2X
WFE2XKIT1
Portable fume extraction kit with flex arm for one work station
Order No. 120V - WFE2XKIT1
Includes:
N 0053658899 WFE 2X Fume Extraction Unit 100-240 V / 50/60 Hz
N 0053657199 KIT 1 WF Angled 60 for volume extraction consists of:
0053657899 Extraction arm
0053657399 Funnel nozzle
0053657499 Stop valve
0053657599 Bench mounting clamps
0053657699 Extraction hose
0058762753 Adapter with O ring
N Filters must be ordered separately (see page 53)
WFE2XKIT1S
Portable fume extraction kit with articulated arm for one workstation
Order No. 120V - WFE2XKIT1S
Includes:
N 0053658899 WFE 2X Fume extraction unit 100-240 V / 50/60 Hz
N 0053657999 KIT 1 WF 60 Angled articulated extraction arm
for volume extraction consists of:
0053659899 Articulated extraction arm with Bench mount
0053657799 Angled nozzle
0053657599 Bench mounting clamps
0053657699 Extraction hose
0053657899 Extraction arm
0058762753 Adapter with O Ring
N Filters must be ordered separately (see page 53)
Option: Arm with sloped nozzle
Order No. 0053657299
Includes:
N KIT 1 WF Angled 60 for volume
extraction consists of:
0053657899 Extraction arm
0053657799 Angled nozzle
0053657499 Stop valve
0053657599 Bench mounting clamps
0053657699 Extraction hose
0058762753 Adapter
FUME
EXTRACTION
48
Portable fume extraction kit for one work station
WFE2ES
AN ECONOMICAL SOLUTION TO FUME EXTRACTION
THE WELLER ADVANTAGE:
This unit offers serious fume extraction in an economical, compact package that's
easy to install, easy to operate, and comes complete with all you need to be up and
running right out of the box.
FEATURES AND BENEFITS:
N Mobile fume extraction unit purifies air at up to two workstations
N Easy filter exchange
N Quick and simple installation
WFE2ESKIT1 includes:
N WFE 2ES Fume Extraction Unit
N Compact filter Order No. 0058762701 Consists of: HEPA filter H12, activated carbon foam
N Fine dust pre-filter F 5
N 0053657199 KIT 1 WF Funnel 60 for
volume extraction consists of:
0053657899 Extraction arm
0053657399 Funnel nozzle
0053657499 Stop valve
0053657599 Bench mounting clamps
0053657699 Extraction hose
0058762753 Adapter
N Filters must be ordered separately (see page 53)
WFE 2ES Specifications:
Maximum capacity 2 workstations
Maximum extraction rate 220 m³/h
Sound level 55 db (A) at 1 m distance
Operating voltage 115V / 60Hz
Power input 115 VA
Maximum vacuum 1.800 Pa
Dimensions (L x W x H) 320 x 320 x 395 mm
12.6 x 12.6 x 15.5 in
Weight 9 kg / 19.8 lb.
Order No. 120V WFE2ES KIT1
ESD safe low sound
level
RS 232 cable (2 m)
005 87 359 09
pipe system suitable for
WFE 2S / WFE 2ES
and WFE 2X
005 31 191 99
remote control
rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
T piece 50 mm
pipe 50 mm
rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
005 87 358 45
metal exhaust hood
WSD 81
WD 1000T
damper WFV 60
005 36 574 99
extraction arm 60
005 36 578 99
Kit1 WF angled 60
005 36 572 99
Kit1 WF Funnel 60
005 36 571 99
extraction arm 60
005 36 578 99
extraction hose 60
3 m
005 36 576 99
hose connection 50
005 87 358 47
hose connection
50 90
005 87 358 48
WF nozzle funnel
005 36 573 99
WR3M
bench mounting bracket 60
005 36 574 99
extraction hose 60
3 m
005 36 576 99
extraction hose 60
sold by meter
005 87 354 27
nozzle sloped
005 36 577 99
damper WFV 60
005 36 574 99
160
rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
Kit WF Funnel 60
005 36 571 99
WF nozzle funnel
005 36 573 99
WF extraction arm 60
005 36 578 99
damper WFV 60
005 36 574 99
right angle pipe 75
005 87 358 69
pipe clamps 75
005 87 358 64
adapter 75/50
005 87 358 56
hose clamp 70-90
005 87 358 31
T piece 75
005 87 358 71
pipe 75
005 87 359 32
pipe 75
005 87 358 70
rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
T piece 75
005 87 358 71
extraction hose 60
3 m
005 36 576 99 rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
hose connection 70 90
005 87 358 33
extraction hose 60
sold by meter
005 87 354 27
WFE 4S
RS 232 cable (2 m)
005 31 191 99
remote control
005 87 359 09
articulated extraction arm
005 36 989 99
WD 2000M
hose connection 50
005 87 358 47
rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
rubber hose
005 87 627 52
connecting piece
005 87 627 51
O-ring
005 87 627 53
pre-filter box
005 87 358 62
Kit WF Sloped 60
005 36 572 99
bench mounting bracket 60
005 36 574 99
damper WFV 60
005 36 574 99
extraction arm 60
005 36 578 99
WF angled nozzle
005 36 577 99
RS 232 cable (2 m)
005 31 191 99
end seal 75
005 87 358 55
extraction hose 60
3 m
005 36 57 699
remote control
005 87 359 09
WFE 8S
extraction hose 75
005 87 353 13
WSB 150
FUME
EXTRACTION
49
INSTALLATION OPTIONS
INSTALLATION OPTION FOR A CENTRAL SYSTEM UTILIZING WFE 2S
TOTAL PIPE LENGTH: 15 m
INSTALLATION OPTION FOR A CENTRAL AND STAND ALONE SYSTEM UTILIZING WFE 4S
TOTAL PIPE LENGTH: 30 m
FUME
EXTRACTION
50
ACCESSORIES
TO BUILD YOUR OWN CUSTOM SOLUTION
When soldering, gluing, or working with solvents, it is important to place the nozzle
as close to the source as possible to prevent harmful particles and gases from being
spread into the work area.
The arms and nozzles feature snap-fit connections, and are simple to install, easily
locking into the desired position.
Order No. Description
0058735847 Hose connection 50 for WFE 2S and WFE 4S,
e.g. for the direct connection of accessories
by means of 50 mm (1.96 in.) extraction hose.
Black plastic.
0058735832 Hose connection 75 for WFE 2S and WFE 4S,
e.g. for connection to a stand alone system
by means 75 mm (2.95 in.) pipe or 75 mm
(2.95 in.) extraction hose. Black plastic.
0058735848 Hose connection 50, 90° for WFE 2S and
WFE 4S, e.g. for the direct connection of
accessories by means of 50 mm (1.96 in.)
extraction hose. Black plastic.
0058735833 Hose connection 75, 90° for WFE 2S and
WFE 4S, e.g. for connection to a stand alone
system by means of 75 mm (2.95 in.) pipe or
75 mm (2.95 in.) extraction hose. Black plastic.
0053657699 Extraction hose 60, 60 mm (2.36 in.), for
connection to pipe system 50. 3 m (118.11 in.).
Flexible gray/black plastic.
0058735427 Extraction hose 60, 60 mm (2.36 in.), for
connection to pipe system 50. 1 m (39.37 in.).
Flexible gray/black plastic. Sold by the meter.
Order No. Description
0058735879 Hose clamp 50 – 70 mm, (1.96 - 2.75 in.)
set of two, for securing extraction hose 50.
0058735831 Hose clamp 70 – 90 mm, (2.75 - 3.54 in.)
set of two, for securing extraction hose 75.
Order No. Description
0058735313 Extraction hose 75, 75 mm (2.95 in.),
for connection to pipe system 75.
Sold by the meter. Flexible gray/black plastic.
HOSE CONNECTIONS
HOSE CLAMPS
EXTRACTION HOSES
FUME
EXTRACTION
51
Order No. Description
0053659899 Articulated extraction arm, 60 mm diameter,
with two articulated joints and bench clamp.
ESD safe.
Order No. Description
0053657899 Flexible extraction arm, 60 mm (2.36 in.) diameter,
for angled and funnel nozzles.
Maximum length 1 m (39.37 in.), ESD safe.
0053658099 ESD Microscope Extraction arm, 32 mm
Extraction arm for sloped and funnel nozzles
with perfect flexible for lack and inaccessible
space applications, as microscopes and fine
soldering works.
Order No. Description
0053657399 WF funnel nozzle 60, for flexible and articulated
extraction arm, 230 mm x 100 mm.
Order No. Description
0058735845 Exhaust hood, 200 x 100 mm (7.87 x 3.93 in.),
recommended for use with hot air soldering
operations; uses extraction hose 60 with
adapter (Order No. 0058762753)
Order No. Description
0053638099 WFDD 50 Extraction plate with 1 m (39.37 in.)
flexible hose, 300 x 210 mm (11.81 x 8.26 in.),
for adhesive and solvent fume extraction.
ESD safe.
Order No. Description
0053657799 WF 60 angled nozzle for flexible and
articulated extraction arm.
ARTICULATED EXTRACTION ARM
FLEXIBLE EXTRACTION ARMS
FUNNEL NOZZLE
EXHAUST HOOD
EXTRACTION PLATE
ANGLED NOZZLE
FUME
EXTRACTION
52
ACCESSORIES
TO BUILD YOUR OWN CUSTOM SOLUTION
Order No. Description
0053657499 WFV 60 Stop valve. Table connector for 60 mm
(2.36 in.) flex arm and extraction tube including
air flow valve.
Order No. Description
0053657599 Bench mounting clamps.
Maximum width of clamp 100 mm (3.93 in.).
100 mm (3.93 in.) diameter. Metal.
Order No. Description
0058762750 60/50 Adapter for applications using the 60 mm
(2.36 in.) extraction system connected to the
former 50WFTB and WFFMP50.
0058762753 Adapter with Silicone O-ring, 50 mm (1.96 in.)
diameter. Seal for 60 mm (2.36 in.) flex arm
mounted directly on WFE 2S and WFE 2ES.
Order No. Description
0053659199 Hanging device for table mounting for fume
extraction unit WFE 2X.
0053659299 Trolley for fume extraction unit WFE 2X.
STOP VALVE
MOUNTING CLAMPS
ADAPTERS
ACCESSORIES FOR WFE2X
FUME
EXTRACTION
53
Order No. Description
0058735920 Exhaust adapter of pipe 100 for
fume extraction unit WFE 20D.
0058735840 Exhaust adapter of pipe 100 for
fume extraction unit WFE 4S.
0058735915 Exhaust adapter of pipe 75 for
fume extraction unit WFE 2S.
Order No. Description
0058735909 Remote control for fume extraction units
WFE 20D, WFE 2S, WFE 4S and WFE 8S.
Switching unit on/off, speed setting (only
WFE 2S / WFE 4S), filter status display
0053119199 Interface cable RS 232, 2 m (78.74 in.) for remote
monitoring by PC (type 1:1).
0053659399 Remote control for WFE2X
Order No. Filters for WFE 8S:
0053659499 Replacement pre-filter
0053659599 Replacement compact filter consists of: HEPA filter H13,
wide band gas filter (50% active carbon, 50% Chemabsorb)
Order No. Filters for WFE 4S:
0058735837 Fine dust filter F5 (10 pieces)
0058735836 Fine dust filter F7 (10 pieces)
0058735838 Compact filter consists of: HEPA filter H13, wide band gas filter
(50% active carbon, 50% Chemabsorb)
0058735835 Option: Adhesive fume filter
(50% active carbon, 50% Chemabsorb)
Order No. Filters for WFE 2S:
0058735884 Fine dust filter F5 (10 pieces)
0058735885 Fine dust filter F7 (10 pieces)
0058735883 Compact filter consists of: HEPA filter H13, wide band gas filter
(50% active carbon, 50% Chemabsorb)
0058735895 Option: Adhesive fume filter
(50% active carbon, 50% Chemabsorb)
Order No. Filter for WFE 2X:
0053659099 Replacement compact filter consists of: HEPA filter H13,
wide band gas filter (50% active carbon, 50% Chemabsorb)
Order No. Filter for WFE 2ES:
0058735884 Fine dust filter F5 (10 pieces)
0058762701 Compact filter consists of: HEPA filter H12, wide band gas filter
(10% active carbonate foam)
Order No. Filter for Pre-Filter Box:
0058735860 F7 fine dust filter for large quantities of dust
0058735924 Filter for fine dust or large volumes of liquid flux and adhesives
EXHAUST ACCESSORIES
REMOTE CONTROLS & CABLE
REPLACEMENT FILTERS
0058735909
0058735920
0053659399
0058735840 0058735915
FUME
EXTRACTION
54
WFE2P Components and Specifications:
Operating Voltage 120 V / 60Hz
Operator Capacity 1 - 2 Weller FE series irons
Weight 10 lb. 12 oz. (4.9 kg)
Dimensions 5.5 in. diameter x 11.375 in.
(140 x 289 mm)
Noise Level < 45 db (A) at 1 m distance
Power Input 60 W
Order No. 120V 0053623299
Efficient four-stage
filter station is easily
replaceable
ESD safe low sound
level
HEPA filter H13
and wide band
gas filter
Fine dust
pre-filter F7
WFE2P
TWO OPERATOR FUME EXTRACTOR
THE WELLER ADVANTAGE:
This compact, self-contained unit supports up to two FE tip extraction soldering
irons on line voltage and has its own internal vacuum pump, so no external power
or air is needed. It's perfect for work areas where space is limited.
FEATURES AND BENEFITS:
NSelf-contained bench-top unit – no external air source required
NSmall footprint and compact size for space savings and portability
NFor use with up to two Weller FE series fume extraction soldering irons
WFE2P Includes:
NWFE 2P Fume Extraction Unit
N Compact filter consists of: HEPA filter H13 (Order No. 0053641099),
wide band gas filter (50% active carbon, 50% chemical absorbent)
NFine dust filter F7 (Order No. 0053642199)
N Filters must be ordered separately (see page 57)
INTEGRAL FUME EXTRACTION IRON / 80 WATTS
NFume extraction soldering pencil, 80 watts
NCompatible with any WRS rework system,
and WD series soldering stations
NIncludes a 5 mm cylinder brush and a funnel
for support when not in use
NUses LT series tips found on page 5
NOrder No. 0052916699
NSupport stand AK20 (Order No. 0051503099)
FE75
ESD safe
Order No. Description
0052541000 Extraction hose (spare part). Heat-resistant silicone hose,
5 mm (0.19 in.), for all FE (Fume Extraction) soldering irons
(sold by the meter). (shown)
0052918599 AKFE11 Fume extraction adapter kit (Macro Kit) for W100PG,
WP25, WP30, WP35, W60P, TC201T irons. For use with
Weller® Fumex® system. Complete with plastic ESD tubing.
(shown)
Order No. Description
0052918699 FE Attachment with tube, 6 mm (0.23 in.) for WP120,
WSP80, WP80, WMP.
0052918599 FE Attachment with tube, 4.5 mm (0.17 in.) for WP 120, WMRP
and WSP 80, WP 80, WMP for fine soldering applications.
0058744875 FE Spare Clip-Set for FE attachment, tube 4.5 mm (0.17 in.).
0058744876 FE Spare Clip-Set for FE attachment, tube 6.0 mm (0.23 in.).
0051515699 WDH 50 safety rest for soldering iron with FE attachment.
0052512599 FE Attachment for LR 21, WSP150 with safety rest AK1.
ACCESSORIES
FE ATTACHMENTS
Order No. Description
Cord support. The cord support keeps the soldering
iron cord out of the direct working area. This allows
easier handling of the soldering iron.(shown)
0051506599 Cord support for safety rest AK 20.
0051506699 Cord support for safety rest KH 20/23.
Order No. Description
0051503099 AK 20 Safety rest for FE 75
CORD SUPPORT
SAFETY REST
FUME
EXTRACTION
56
Order No. Description
0053631699 Extraction hose 40, 1 m (39.37 in.), 40 mm
(1.5 in.). Complete with 2 hose connectors
for direct connection of unit (WFE 20D)
to pipe system 50. Flexible grey/black plastic.
0053641400 Extraction hose 40, 40 mm (1.5 in.)
without hose connectors. Sold by the
meter. Flexible grey/black plastic.
Order No. Description
0053632699 Extension hose DN 17 mm OD (13 mm ID) x 5 M
length / 0.67" OD (0.51" ID) x 16.4' length. Used
where the fume extraction iron is further than
2.5 m (8.2' ft.) from the pipe system 50. Note:
Connection nipple for hose 17 and adapter 17
will be required. Clear plastic.
Order No. Description
0058735865 Connection nipple for extension hose 17.
0058735866 Nut G 3/8“ for connection nipple. (Not Shown)
0053634399 Adapter 17 for connection extension hose DN 17
with 5 mm (0.19 in.) extension hose on FE irons.
0053633899 Connection nipple for 5 mm (0.19 in.) diameter
extraction hose to connect FE soldering irons
directly to pipe system 50. The connection nipple
may be screwed into the pipe system at any point.
Order No. Description
0053641599 Hose connector 40 – 50 for connecting
extraction hose 40 and pipe system 50.
Black rubber.
EXTRACTION HOSES
EXTENSION HOSE
CONNECTION NIPPLES
HOSE CONNECTOR
ACCESSORIES
FOR WORKBENCH INSTALLATIONS
Order No. Filters for WFE 20D:
0058735837 Fine dust filter F5
0058735836 Fine dust filter F7
0058735838 Compact filter onstists of: HEPA filter H13, wide band
gas filter (50% active carbon, 50% chemical absorbent)
Order No. Filters for WFE 2P
0053641099 Compact filter consists of: HEPA filter H13, wide band
gas filter (50% active carbon, 50% chemical absorbent)
0053640799 Compact filter consists of: HEPA filter H13, wide band
gas filter (100% active carbon)
0053642199 Fine dust filter F7 (3 pieces)
0053659799 Compact filter with enlarged pre-filter
REPLACEMENT FILTERS
FUME
EXTRACTION
57
WSA350
BENCHTOP SMOKE ABSORBER
THE WELLER ADVANTAGE:
The WSA350 removes flux fumes from the benchtop by drawing the smoke
through an activated carbon filter. Powered by an exceptionally quiet fan,
the WSA350 can process up to 1.37 cubic meters of air per minute. The
collector can be easily adjusted to multiple positions, optimizing its fume-
absorbent performance.
FEATURES AND BENEFITS:
NRemoves flux fumes from soldering workbench
NGreat for workspaces using more active fluxes used with lead-free solder
NFumes are absorbed by the replaceable carbon-activated filter
NIncludes one replaceable filter
NStand allows the smoke absorber to be adjusted to varying angles
NFan is quiet and will not add significant noise to the workspace
NESD safe
NPackage of 3 replacement filters. Part No. WSA350F
WSA350 Specifications:
Voltage 120 Vac
Air Consumption 87-107 CFM
Sound Level 45-50 dB (A)
Power Consumption 20W
Absorption Capacity 1.25 m³/min. (50 Hz) to
1.37 m³/min. (60 Hz)
ESD Safe Yes
UL and cUL Listed Yes
WSA350F Specifications:
Filters per pack 3
Size 130mm x 130mm x 10mm
Activated carbon
content per filter 9g
Maximum capacity for
noxious components
per filter 2.5g
WSA350F
Replacement
Filters
FUME
EXTRACTION
60
NIdeal for a wide variety of electronic tasks
NUses ST series long life double-coated
iron-plated tips- ST3 included-see page 37
NQuick change knurled collar,
stainless steel barrel
NCushion grip handle and plug-in heating element
N6' 3-wire cord, iron is 7 7/8" long
NUL and cUL listed (120 VAC units only)
N Use with optional PH60 stand
PROFESSIONAL
Catalog Number Description
WP25 25 watts, 120 V, 750° F Professional soldering iron, 3-wire cord
WP30 30 watts, 120 V, 800° F Professional soldering iron, 3-wire cord
WP35 35 watts, 120 V, 850° F Professional soldering iron, 3-wire cord
SOLDERING IRONS / 25 WATT / 30 WATT / 35 WATT
WP25
NUses Weller “closed loop” method
of controlling maximum tip temperature
NPortable line voltage iron - no base station required
NStainless steel modular plug-in heater,
greater efficiency and versatility
NTemperature is controlled by tip
(600° F, 700° F, and 800° F tips)
NNominal heat-up time with 700° F tip
is 110 seconds
NUses CT series tips found on page 62
NHeating element type:
Nichrome wound, plug in
NUL and cUL listed
NFume extraction adapter kit available-
Cat. No. AKFE11
NUse W60P with optional PH60 stand
NUse W100P with optional PH100 stand
CONTROLLED OUTPUT
Catalog Number Description
W60P 60 watts, 120 V, 700° F 2-wire soldering iron with CT5A7 tip
W60P3 60 watts, 120 V, 700° F 3-wire soldering iron with CT5A7 tip
W100PG 100 watts, 120 V, 700° F heavy duty 3-wire soldering iron with CT6F7 tip
W100P3 100 watts, 120 V, 700° F heavy duty 3-wire soldering iron with CT6F7 tip
SOLDERING IRONS / 60 WATT / 100 WATT
W60P
W100PG
TCP12P
CONTROLLED-OUTPUT FIELD SOLDERING IRON
NVersatile controlled tool for field servicing
NOperates from 12 volt batteries
or low voltage power source
NComplete with battery clips and 12' fused cord
NSoldering iron comes with PTA7 tip,
creates 700° F temperature
NSee page 25 for replacement tip selection
SOLDERING
IRONS
61
A C
Cat No. IN. MM IN. MM
ST1 0.062 1.58 0.75 19.05
ST2 0.093 2.38 0.75 19.05
ST3 0.125 3.17 0.75 19.05
ST4 0.187 4.74 0.75 19.05
ST6 0.031 0.79 0.75 19.05
ST8 0.062 1.58 0.75 19.05
SCREWDRIVER
A C
Cat No. IN. MM IN. MM
ST5 0.031 0.79 0.75 19.05
SINGLE FLAT
A C
Cat No. IN. MM IN. MM
ST7 0.031 0.79 0.75 19.05
CONICAL
600° F 700° F 800° F 900° F A C
Cat. No. Cat. No. Cat. No. Cat. No. FITS IRON IN. MM IN. MM
- CT5A7 CT5A8 - W60P 0.062 1.58 1.15 29.36
- - CT5B8 - W60P 0.093 2.38 1.15 29.36
- CT5C7 CT5C8 - W60P 0.125 3.17 1.15 29.36
- CT5D7 CT5D8 - W60P 0.187 4.74 1.15 29.36
- CT5E7 CT5E8 - W60P 0.250 6.35 1.15 29.36
CT6C6 CT6C7 CT6C8 - W100P 0.125 3.17 1.37 34.92
CT6D6 CT6D7 CT6D8 - W100P 0.187 4.74 1.37 34.92
CT6E6 CT6E7 CT6E8 - W100P 0.250 6.35 1.37 34.92
CT6F6 CT6F7 CT6F8 CT6F9 W100P 0.375 9.52 1.37 34.92
- CT6G7 - - W100P - - 1.37 34.92
CT5 SERIES SCREWDRIVER CT6 SERIES SCREWDRIVER
TIPS
ST SERIES TIPS FOR WP25 / WP30 / WP35 IRONS
TINNED WITH LEAD FREE SOLDER
TIPS
CT SERIES TIPS FOR W60P AND W100P IRONS AND WLC100 STATION
TINNED WITH LEAD FREE SOLDER
SOLDERING
IRONS
62
SOLDERING
IRONS
63
NLightweight, pencil thin
soldering iron with stay-cool handle
NDesigned for soldering miniature components
NDevelops tip temperature of 800° F
N3-wire grounded plug
NUses Weller MP series auto slide-in tips
NUL listed
WM120
THIN SOLDERING IRON / 12 WATT
MODULAR SOLDERING IRONS
Catalog Number Description
SL325 Modular soldering iron with 7400 handle, 537S heater, PL111 tip
SL335 Modular soldering iron with 7400 handle, 1237S heater, PL113 tip
SL345 Modular soldering iron with 7400 handle, 4037S heater, PL133 tip
SL500 Modular soldering iron with 7760 handle, 37UG heater, PL133 tip
SL325
NModular soldering irons utilize
interchangeable handles, heaters and tips
N3-wire grounded
NUses 9800 iron holder
NUL and cUL listed
NTips on page 65
STANDARD SERIES
Catalog Number Description
7400 Standard Series modular iron handle, 3-wire standard cord
7500 Standard Series modular iron handle, 3-wire burn resistant cord
7770 Standard Series modular iron handle (Blue), 2-wire standard cord
7760 Standard Series modular iron handle (Red), 2-wire standard cord
NModular soldering irons utilize interchangeable handles
NInterchangeable heaters and tips for custom applications and maintenance
NIron has 5' cord
NFeature cool, “soft touch”, acid and flux resistant grips
NUses 9800 iron holder
NUL and cUL listed
N7400 and 7500 handle for SL325, SL335, SL345 and
SL500 are 3-wire grounded
N7760 handle (red) and 7770 handle (blue) is 2-wire ungrounded
HANDLES
STANDARD SERIES MODULAR SOLDERING IRON HANDLES
7400
A C
Cat No. IN. MM IN. MM
MP131 0.015 0.39 0.43 11.09
A C
Cat No. IN. MM IN. MM
MP133 0.031 0.79 0.43 11.09
CONICAL
SINGLE FLAT
TIPS TINNED WITH LEAD FREE SOLDER
WITH INTEGRAL TIP
NUsed with Standard Series modular irons
SL325, SL335, SL345 and SL500 and Standard
Series Handles 7400, 7500, 7760, and 7770
Catalog Number Description
33 Modular heater with long chisel tip, 50 watt, 1100° F
533S Modular heater with long chisel tip, 23 watt, 800° F
1233S Modular heater with integral long chisel tip, 33 watt, 900° F
4033S Modular heater with long chisel tip, 45 watt, 1000° F
4039S Modular heater with short chisel tip, 45 watt, 1100° F
MODULAR HEATERS
MODULAR HEATERS
FOR THREAD-IN AND THREAD-ON TIPS
NUsed with Standard Series modular irons
SL325, SL335, SL345 and SL500 and Standard
Series Handles 7400, 7500, 7760, and 7770
NTips on page 65
THREAD-IN TIPS
Catalog Number Description
535S Modular heater thread-in tip, 23 watt, 700° F
1235S Modular heater thread-in tip, 33 watt, 800° F
4035S Modular heater thread-in tip, 45 watt, 900° F
THREAD-ON TIPS
Catalog Number Description
37UG Modular heater uses thread-on tip, 50 watt, 1000° F
537S Modular heater thread-on tip, 23 watt, 700° F
1237S Modular heater thread-on tip, 33 watt, 800° F
4037S Modular heater thread-on tip, 45 watt, 900° F
MODULAR HEATERS
FOR DOUBLE INSULATED HANDLE
NUsed with DI (double insulated) series
555XT two-wire handle
Catalog Number Description
360 Modular heater uses thread-on tip, 27 watt, 700° F
362 Modular heater uses thread-on tip, 45 watt, 900° F
363 Modular heater uses integral chisel tip, 45 watt, 1000° F
HANDLES
DOUBLE INSULATED MODULAR SOLDERING IRON HANDLE
555XT
NBio-mechanical handle design
NHas flexible heat-resistant, double insulated (9') 2-wire cord set
NSoft touch cool, molded grip for operator comfort and control
NTwice the dielectric values of standard UL requirements
64
SOLDERING
IRONS
SOLDERING
IRONS
65
PENCIL
A C
Cat No. Type IN. MM IN. MM
100UG Adapter -- -- -- --
PL331 Plated 0.01 0.25 0.85 21.59
CHISEL A C
Cat No. Type IN. MM IN. MM
PL333 Plated 0.13 3.30 0.85 21.59
333 Bare Copper 0.12 3.04 0.85 21.59
7155 Plated 0.06 1.52 0.84 21.33
TAPERED NEEDLE
A C
Cat No. Type IN. MM IN. MM
PL338 Plated 0.05 1.27 0.94 23.87
CHISEL
A C
Cat No. Type IN. MM IN. MM
PL113 Plated 0.13 3.30 0.66 16.76
PL153 Plated 0.20 5.08 0.56 14.22
PL350 Plated 0.40 10.14 -- --
LONG TAPER CHISEL
A C
Cat No. Type IN. MM IN. MM
PL133 Plated 0.20 5.08 0.56 14.22
MICRO SPADE A C
Cat No. Type IN. MM IN. MM
PL114 Plated 0.05 1.27 0.41 10.41
PENCIL A C
Cat No. Type IN. MM IN. MM
PL111 Plated 0.03 0.76 0.66 16.76
PL153 Bare Copper 0.02 0.50 0.66 16.76
PRECISION A C
Cat No. Type IN. MM IN. MM
PL100 Plated 0.05 1.27 0.45 11.43
SCREWDRIVER A C
Cat No. Type IN. MM IN. MM
PL151 Plated 0.13 3.30 0.66 16.76
STEPPED CHISEL
A C
Cat No. Type IN. MM IN. MM
PL155 Plated 0.07 1.77 0.66 16.76
TAPERED NEEDLE A C
Cat No. Type IN. MM IN. MM
PL138 Plated 0.05 1.27 0.66 16.76
TIPS
PL SERIES THREAD-IN STYLE TIPS FOR MODULAR HEATERS
TINNED WITH LEAD FREE SOLDER
TIPS
PL SERIES THREAD-ON STYLE TIPS FOR MODULAR HEATERS
TINNED WITH LEAD FREE SOLDER
PORTASOL® PSI100C
SUPER-PRO SELF-IGNITING CORDLESS BUTANE SOLDERING IRON AND KIT
NSelf-igniting portable butane heat tool - professional quality
NIdeal for service technicians
NFor uses such as anti-static soldering, heat shrink and cutting rope
NFeatures “Auto Switch” safety shut-off, and iron plated tips
NButane fuel level is visible through a window
on the body of the tool
NRugged stainless-steel body
NProvides up to 125 watts of power
NAdjustable temperature up to 1,076° F
NOperates up to 2 hours per refill
NRefills with butane fuel - Weller® cat no. WB1 or WB2
Portasol® is a registered trademark
of Olgesby and Butler Limited
PSI100K KIT
Complete kit contains: PSI100C iron with PSI1 tip, PSI3 tip,
PSI9 tip, PSI10 tip, sponge, case
PSI100C
PSI100K
PSI SERIES TIPS FOR PSI100C AND PSI100K SOLDERING TOOLS
SINGLE FLAT A C
Cat No. IN. MM IN. MM
PSI1 0.031 0.79 0.640 16.26
PSI2 0.093 2.36 0.640 16.26
PSI3 0.125 3.18 0.640 16.26
PSI4 0.187 4.75 0.420 10.67
HOT AIR A C
Cat No. IN. MM IN. MM
PSI9 0.230 5.84 0.240 6.10
KNIFE A C
Cat No. IN. MM IN. MM
PSI10 0.195 4.95 1.485 37.62
DOUBLE FLAT A C
Cat No. IN. MM IN. MM
PSI5 0.031 0.79 0.680 12.27
PSI6 0.093 2.36 0.680 12.27
PSI7 0.125 3.18 0.680 12.27
PSI8 0.187 4.75 0.680 12.27
66
CORDLESS
SOLDERING
IRONS
CORDLESS
SOLDERING
IRONS
67
PORTASOL® P2C
SELF-IGNITING CORDLESS BUTANE SOLDERING IRON AND KIT
NA lightweight, compact cordless butane soldering and hot air tool
NPiezo ignition with push-button ease & convenience,
25 watts to 75 watts
NFast heat-up for high productivity, melts solder
in less than 40 seconds
NGas capacity allows up to 1 hour of continuous use
NRefills in less than 20 seconds so you can stay on the job
NAutomatic cut-off switch when cap replaced for safety
NCan be used as a mini-torch with flame tip
NRefills with butane fuel - Weller® cat no. WB1 or WB2
Portasol® is a registered trademark of Olgesby and Butler Limited
P2KC KIT
Complete Iron and Hot Air Tool kit contains; P2C iron with soldering tip, mini blow
torch tip, hot knife tip, hot air tip and deflector, sponge and tray, storage case with
tool holder, and instructions
P2C
P2KC
PPT SERIES TIPS FOR P2C AND P2KC SOLDERING TOOLS
SINGLE FLAT A C
Cat No. IN. MM IN. MM
PPT1 0.031 0.79 0.460 11.68
PPT2 0.093 2.36 0.460 11.68
A C
Cat No. IN. MM IN. MM
PPT5 0.031 0.79 0.460 11.68
PPT6 0.093 2.36 0.460 11.68
DOUBLE FLAT
NPremium quality butane fuel
NCompatible with Weller® Portasol® and Weller® Pyropen® tools
NPrinted in English and Spanish with operating instructions
on back of can
Catalog Number Description
WB1 Premium butane fuel, 2.1 oz.
WB2 Premium butane fuel, 1.0 oz.
PREMIUM BUTANE FUEL
NIgnites with the push of a button, ideal for field service jobs
NLightweight and completely portable, ready to use in 30 seconds
NSturdy metal tank holds enough butane gas for 3 hours of operation
NTemperature adjusts from 482° F to 932° F
NRefills with butane fuel - Weller® Cat. No. WB1 or WB2
WPA2
PYROPEN® PROFESSIONAL SELF-IGNITING
CORDLESS BUTANE SOLDERING IRON
NLightweight mini iron
NDual function soldering iron and brazing torch
NSoldering iron: 392° F - 842° F; Hot blow feature: 806° F maximum
NTorch feature: 2372° F maximum
NIncludes soldering and hot air tips
NRefills with butane fuel - Weller® cat. no. WB1 or WB2
WST2 PYROPEN® JUNIOR CORDLESS
BUTANE SOLDERING IRON
WSTA6 JUNIOR CORDLESS BUTANE SOLDERING IRON
NSelf-ignition finger switch - no sparklighter required
NTemperature control gives you adjustment equivalent to 15 to 60 watts
NTank can hold enough gas for one hour of operation
N30 second heat-up time
NIncludes soldering and hot air tips
NRefills with butane lighter gas - Weller® cat. no. WB1 or WB2
NLightweight and completely portable
NReady to use in 30 seconds
NIdeal for field service jobs
NSturdy metal tank holds enough gas for three hours of operation
NTemperature adjusts from 392° F - 932° F
NRefills with butane lighter gas - Weller® cat. no. WB1 or WB2
NOTE: For tips used on this tool, please refer to the WPA2
tool at the top of this page.
WSTA3
PROFESSIONAL CORDLESS
BUTANE SOLDERING IRON
HOT AIR TIPS
Width Reach
Cat No. IN. MM IN. MM
WHC51 0.17 4.27 0.24 6.10
WHC52 0.19 4.91 0.24 6.10 TAPER NEEDLE TIPS
Width Reach
Cat No. IN. MM IN. MM
WPT1 0.04 1.00 0.75 19.05
WPT5 0.04 1.00 0.72 18.29
CHISEL TIPS
Width Reach
Cat No. IN. MM IN. MM
WPT2 0.08 2.00 0.72 18.29
WPT11 0.32 8.00 0.55 14.00
WPT13 0.20 5.00 0.55 14.00
SPADE 35°
Width Reach
Cat No. IN. MM IN. MM
WPT8 0.08 2.00 0.65 16.51
TAPER NEEDLE TIP
Width Reach
Cat No. IN. MM IN. MM
WPT15 0.02 0.51 0.55 14.00
HOT AIR TIP
Width Reach
Cat No. IN. MM IN. MM
WHC54 0.06 1.50 -- --
TAPER NEEDLE TIP
Width Reach
Cat No. IN. MM IN. MM
WPT01 0.04 1.00 0.55 14.00
68
CORDLESS
SOLDERING
IRONS
6958 6964
6959
FEATURES AND BENEFITS:
NHeavy duty heater and fan components
for long service life
NLight weight for reduced operator fatigue
NPerfect for shrink tubing and vinyl/T.F.E.,
epoxy curing, drying, and cooling
6966C ACCESSORIES
Catalog
Number Description
6956 Reflector (.50")
6957 Reflector (1.50")
6958 Reducing Baffle
6964 Precision Reflector, 0.20"
6965A Heat Gun Wire Stand
6959 Adapter for 6966C baffles
for use with 1095 Gun
6956 6957
6965A
6966C LIGHTWEIGHT HEAT GUN 250 WATTS / 120 VOLTS
THE WELLER ADVANTAGE:
Weighing in at less than a pound, this ESD safe heat gun is perfect for repetitive
or continuous use in production plants, labs, and electronics service facilities.
Three-position switch…
HOT – OFF – COOL
Hot air temperature at nozzle
approx. 750° F - 800° F
6966C Components & Specifications
Weight 13 oz. (.368 kg)
Voltage 120 V 50/60 Hz
Power Consumption 250 W
Temperature Range 750° F – 800° F (399° C – 427° C)
Approximate temperature at nozzle
ESD Safe Yes
Cord Type Three-wire grounded
Cord Length 6 ft. (1.8 m)
UL and cUL Listed Yes
Hook for attaching
to a spring balance
NDual temperature, economical heat gun,
ideal for most heat gun applications
NApplying heat shrinking products
NCuring epoxy and softening adhesives
NDrying, thawing frozen pipes
NSoftening and molding plastics
NHeating liquids and stripping paint
NDual temperature 1200° F (1000 W) and 790° F (400 W);
3-way switch (Hi - Off - Low)
N3-wire grounded plug 6' power cord
NLightweight, 22 oz. with cord
1095 STANDARD DUTY HEAT GUN / 1000 WATTS
1080 1082 1085
1095 ACCESSORIES
Catalog
Number Description
1080 Reducer for concentrating heat
1082 Reflector for heat shrink tubing/caps
1085 Baffle kit containing Reducer,
Reflector, Flame Spreader
HEAT GUNS
69
D550 120V PROFESSIONAL SOLDERING GUN
NReliable industrial quality tool
NHeavy-duty dual-heat gun produces 300 or 200 watts
NHighest power output of all our soldering guns
N300 watts in high trigger (1st trigger position)
N200 watts in low trigger (2nd trigger position)
NHeat-resistant thermoplastic housing, tin-plated copper tip,
and heavy-duty grounded cord (3 wire)
NSoldering, cutting and smoothing tips available
NUL and cUL listed
NProfessional heavy-duty, dual-heat gun produces 260 or 200 watts
NPistol grip design, ready to use in 6 seconds
NFingertip trigger selects high (1st trigger position)
NOr low output (2nd trigger position)
NHeavy gauge, high efficiency, tin-plated copper tip
NTwin li ght s il lu min at e wo rk
N2-wire cord, UL and cUL listed
D650 120V INDUSTRIAL SOLDERING GUN
NTempe ra ture co ntrolle d wit h fa st 6- se co nd h eat u p
NLightweight 7 oz./198 g
NSlim long reach barrel
NInterchangeable power heads give choice of
600°F/315°C or 700°F/370°C
NUL and cUL listed
NGT7A3 3-wire version available
GT7A SOLID STATE SOLDERING GUN
Specifications:
Catalog No. D550
UPC Code 037103475411
Wattage 260 W/200 W
Temperature Range 1100° F/900° F
Cord Length 6 ft.
Specifications:
Catalog No. D650
UPC Code 037103079480
Wattage 300 W/200 W
Temperature Range 1100° F/900° F
Cord Length 6 ft.
Specifications:
Catalog No. GT7A
UPC Code 037103473202
Wattage 150 W
Temperature Range 700° F
Cord Length 6 ft.
7A Specifications:
Description 700° Power Head with 3/16” Chisel tip
UPC Code 037103473196
6B Specifications:
Description 600° Power Head with 1/8” Cone tip
UPC Code 037103472830
SOLDERING
GUNS
70
ACCESSORIES
71
7805
SOLDER-OFF DESOLDERING BULB
NDesoldering bulb with T.F.E. tip
NFacilitates accurate printed circuit repair and cleaning
NMay be used with soldering iron
Catalog Number Description
FD2 Flux dispenser, 0.020" needle
FD21D Flux dispenser, 0.008" needle,
ESD Safe
FD2D Flux dispenser, 0.020" needle,
ESD Safe
FD3 Flux dispenser, Tri-Tip
FLUX SOLVENT DISPENSERS
NFlux solvent dispenser
NAvoid spills and waste and place flux precisely
where needed
NSqueeze bottle dispenses 1 drop of liquid through
stainless steel needle
NDispenses flux, oil and solvent
Catalog Number Description
SD74 Scrub-it dispenser, nylon bristles
SD74H Scrub-it dispenser, horse hair bristles, ESD Safe
SCRUB-IT™ SOLVENT DISPENSERS
NDistributes solvent through a nylon brush
NFor cleaning printed circuit boards and other connections
NNo mess, no waste
NDispenser holds 2 oz.
K1101
TYPE K THERMOCOUPLE ASSEMBLY WITH RT4 TIP
NThermocoupled Tip Assembly provides accurate temperature
measurements of Weller soldering iron tips
NCompatible with WMRP soldering pencil and WSM1 / WSM1C
soldering stations
WA2000
SOLDERING IRON ANALYZER
NThe Weller WA2000 measures temperature stability or absolute
temperature in degrees Fahrenheit or Celsius
NPortable unit with long battery life
NThe Weller CP01 Contact Pyrometer (included) can be used to
quickly measure the temperature Stability of a soldering iron tip
NTemperature Accuracy on Weller soldering stations can be performed
using optional Thermocoupled Tip Assemblies offered by Weller
(see "K" Series accessories below)
NSoldering Iron Tip to Ground Resistance measurements may be
performed using the unique Patented circuitry of the Weller
Model WA2000
NPerforms soldering iron Tip to Ground Millivolt potential measurements
(mVAC - TRMS)
Soldering iron
not included
CP01
20 GA. CONTACT PYROMETER
NUsed with the Weller WA2000 analyzer
NUsed to monitor temperature stability (see Thermocoupled Tip Assemblies
below for Temperature Accuracy measurement of soldering iron tips)
K111
TYPE K THERMOCOUPLE ASSEMBLY WITH ETA TIP
K1111
TYPE K THERMOCOUPLE ASSEMBLY WITH LTB TIP
K1121
TYPE K THERMOCOUPLE ASSEMBLY WITH XTB TIP
NThermocoupled Tip Assembly provides accurate temperature
measurements of Weller soldering iron tips
NCompatible with EC1201, PES50 and PES51 Series soldering pencils
NThermocoupled Tip Assembly provides accurate temperature
measurements of Weller soldering iron tips
NCompatible with WP80 soldering pencil
NThermocoupled Tip Assembly provides accurate temperature
measurements of Weller soldering iron tips
NCompatible with WP120 soldering pencil
K181
TYPE K THERMOCOUPLE ASSEMBLY WITH LTB TIP
NThermocoupled Tip Assembly provides accurate temperature
measurements of Weller soldering iron tips
NCompatible with WSP80 soldering pencil
K191
TYPE K THERMOCOUPLE ASSEMBLY WITH NTB TIP
NThermocoupled Tip Assembly provides accurate temperature
measurements of Weller soldering iron tips
NCompatible with WMP soldering pencil
72
ACCESSORIES
MANUAL DESOLDERING PUMPS
7880 MANUAL DESOLDERING PUMP
NPowerful, heavy-duty, spring-loaded vacuum
for complete solder removal
NDesign includes cushioned plunger, easy thumb
activation and ribbed pencil grip
NHeat resistant Teflon* tips
NReplacement tip: 7882BK
* Teflon is a Registered Trademark of DuPont
7881 MANUAL DESOLDERING PUMP
NPowerful, heavy-duty, spring-loaded vacuum
for complete solder removal
NDesign includes cushioned plunger, easy thumb
activation and ribbed pencil grip
NConstructed of static-dissipative material with surface
resistivity of 109 ohms/sq. for component protection
NReplacement tip: 7883
7874B MANUAL DESOLDERING PUMP
NOne hand operation with spring-loaded piston
provides ESD safe, solder removing vacuum
NSelf-cleaning, non-clogging, static-free replaceable tip
NReplacement tip: 7875B
WBH2
CIRCUIT BOARD HOLDER
ESF120ESD
CIRCUIT BOARD HOLDER
NCost effective, ESD safe board holder allows easy retaining
and securing of circuit boards for repair up to 260 mm wide.
NThe perfect partner to Weller’s infrared heating plates for
pre-heating circuit boards.
NCompatible with WHP3000, WHP1000 and WHP200 pre-heaters*
NSafely and securely hold circuit boards during soldering
and rework applications
NFor holding circuit boards up to 160 x 235 mm
NAllows 360 degree rotation in 15 degree increments
NComponents are held in place by a cushioned arm
NOrder No. 0051502699
NESD Safe
*Pre-heaters sold seperately
ACCESSORIES
73
NFor handling small electronic components
NPocket clip for portability
WLSK200
VACUUM PICK-UP PEN
WPB1
TIP POLISHING BAR
NCleans and renews soldering tips. (Use on cold tips only)
NRemoves plastic resins, oxidation, silicone grease and other
chemicals from tip.
NRe-tin tip after use to prevent oxidation.
SM1
SOLDER-MATE™ DISPENSER
NDurable dispenser minimizes core solder usage
NEliminates operator downtime, provides continuous solder wire
NHolds 1 pound solder spool (solder not included)
WDC
SOLDERING TIP DRY CLEANER
WDC2
SOLDERING TIP DRY CLEANER
0051303199
LEAD FREE TIP ACTIVATOR
NSafely cleans soldering tip without thermal shock.
NCleans tip without water with the use of a special metal wool ball.
NOrder No. 0051512499.
Replacement wools- Order No. 0051384099 (2 pack)
NRetrofits into WDH10(T), 20(T), 30, 40, and 50 iron stands
NGentle tip cleaning when used with lead free solder to extend tip life
NOrder No. 0051512599
Replacement wools- Order No. 0051382499 (2 pack)
NFor regeneration of oxidized tips, works fast and
easy with low temperature.
NEnvironmentally safe, no halides, lead, rosin or residue
NProper use will prolong lifetime of the tips.
ACCESSORIES
74
ACCESSORIES
75
NSwitch assembly for controlled output soldering pencils
NTC201, TCP12P, W60P and W100P series soldering irons
NFits TC201 series, W60P, W100P series irons
SW60
SWITCH ASSEMBLY
TIP RETAINERS
NWS102 for WSP80
N0058744845 for WP80 (Short)
N0058744846 for WP80 (Long)
NBA60 for TC201T, TC201FE, TCP12P, EC1201A,
EC1201AFE, PES50, PES51 Soldering Tools
TC217
REPLACEMENT CORD
NReplacement cord assembly for TC201T soldering pencil
TC201T
REPLACEMENT SOLDERING PENCIL
NUse with WTCP series soldering stations - uses PT series tips
NReplacement 42 Watt soldering pencil with PTA7 tip
EC234
HEATER ASSEMBLY
NHeater assembly for EC1201A and TC201 series
soldering irons
KDS824A
DELUXE SHOT METER
KDS834A
STANDARD SHOT METER
NDigital timer control allows metered shot repeatability
NShot time duration adjustable from 0.01 to 99.99 seconds
NAdjustable four position push button timer
NVacuum feature prevents dripping
NElectrically actuated foot pedal
NAccessory port for optional KDS301 vacuum pickup wand
(see page 78) or for pressurizing an external cartridge or tank
NTwo 0 - 100 PSI regulators and gauges with locking ring
NLow voltage unit for safety
NSlide switch easily changes unit from 115 to 230 volts
NOrder syringe adapters, kits and other accessories separately
NDigital timer control allows metered shot repeatability
NShot time duration adjustable from 0.01 to 99.99 seconds
NAdjustable four position push button timer
NVacuum feature prevents dripping
NElectrically actuated foot pedal
NLow voltage unit for safety
NSlide switch easily changes unit from 115 to 230 volts
NOrder syringe adapters, kits and other accessories separately
Controller KDS824A
Input Voltage (Switchable) 50 / 60 Hz 50 / 60 Hz
Output Voltage 24v 24v
Air Input/Output 0-100 psi 0-6.9 Bar
Vacuum 0-18" Hg -0.61 Bar
Footprint 9.5"W x 7.75"D x 5"H 24.1cm x 19.7cm x 12.7cm
Weight 7 lb, 7 oz 16.4 kg
Timer Range .01 to 99.99 seconds
Repeat Accuracy .5 ms (.0005 sec.)
Recycle Time 12 ms (.012 sec.)
Setting Accuracy ± 2%
Controller KDS834A
Input Voltage (Switchable) 50 / 60 Hz 50 / 60 Hz
Output Voltage 24v 24v
Air Input/Output 0-100 psi 0-6.9 Bar
Vacuum 0-18" Hg -0.61 Bar
Footprint 6.25"W x 7.75"D x 5"H 15.9cm x 19.7cm x 12.7cm
Weight 5 lb, 10 oz 12.4 kg
Timer Range .01 to 99.99 seconds
Repeat Accuracy .5 ms (.0005 sec.)
Recycle Time 12 ms (.012 sec.)
Setting Accuracy ± 2%
Catalog No. UPC No. Packed Description Pack Weight Pack
Quantity
KDS824A 037103173720 Boxed Deluxe Shot Meter 9.090 lb., 257.5 g 1
Catalog No. UPC No. Packed Description Pack Weight Pack
Quantity
KDS834A 037103173744 Boxed Economy Shot Meter 8.140 lb, 230.6 g 1
DISPENSING
76
KDS808
BASIC SHOT METER
KDS806(V)
FOOT VALVE
NBasic low cost system
NEasy to set up and operate
N“Eyeball” accuracy
NElectrically actuated foot pedal
NVacuum feature prevents dripping
N0 - 100 PSI regulators and gauges with locking ring
NLow voltage unit for safety
NSlide switch easily changes unit from 115 to 230 volts
NOrder syringe adapters, kits and other accessories separately
NBasic ON-OFF function
N“Eyeball” accuracy
NFoot actuated for excellent ergonomics
NWorks on compressed air input only - no electricity required
N0 - 100 PSI regulator and gauge
NEasy to set up and operate
NSits on the floor, thus using no table space
NKDS806V includes drip-free vacuum accessory
NOrder syringe adapters, kits and other accessories separately
Controller KDS808
Input Voltage (Switchable) 115V 50/ 60 Hz 230V 50/60 Hz
Output Voltage 24v 24v
Air Input/Output 0-100 psi 0-6.9 Bar
Vacuum 0-18" Hg -0.61 Bar
Footprint 5"W x 7.75"D x 5"H 12.7cm x 19.7cm x 12.7cm
Weight 5 lb, 1 oz 11.1 kg
Controller KDS806/KDS806(V)
Air Input/Output 0-100 psi 0-6.9 Bar
Vacuum 0-18" Hg -0.61 Bar
Footprint - KDS806 3.75"W x 7.25"D x 3.75"H 9.5cm x 18.4cm x 9.5cm
Footprint - KDS806V 3.75"W x 8.5"D x 5"H 9.5cm x 21.6cm x 9.5cm
Weight 3 lb, 5 oz 7.3 kg
Catalog No. UPC No. Packed Description Pack Weight Pack
Quantity
KDS808 037103173706 Boxed Basic Shot Meter 7.340 lb, 207.9 g 1
Catalog No. UPC No. Packed Description Pack Weight Pack
Quantity
KDS806 037103173805 Boxed Foot Valve 4.513 lb, 127.9 g 1
KDS806V 037103173836 Boxed Foot Valve w/ Vacuum 4.715 lb, 133.6 g 1
DISPENSING
77
DELUXE KIT
KDS301
FOR SHOT METERS/FOOT VALVES (DISPENSER NOT INCLUDED)
VACUUM PICK-UP WAND
A starter-kit for users who do not know which size syringe will be used or
when size requirements change. Kit is available separately or as an option
with most shot meters.
Kit contents:
NFour plastic adapter assemblies
(3, 5, 10 & 30cc)
NSamples of Luer Lok™ and tapered syringes
NSyringe tip caps
NNeedle samples (non-sterile, blunt)
in stainless, and plastic tapered tip
NSyringe stand
NMaterial line filter
N2-oz. squeeze bottle
NIndustrial vinyl gloves
NAttaches to the air accessory port of the KDS824A
(page 76) shot meters
NA finger control on the wand allows you to
easily pick up small components
NComes with three sizes of ESD safe suction cups
Catalog No. UPC No. Packed Description Pack Weight Pack
Quantity
KDSDELUXEKIT 037103174451 Boxed Deluxe Starter Kit for
Shot Meters and Foot Valves 3.472 lb, 98.4 g 1
Catalog No. UPC No. Packed Description Pack Weight Pack
Quantity
KDS301 037103174260 Bagged Vacuum Pick-up Wand 0.223 lb, 6.3 g 1
DISPENSING
78
DISPENSING
79
Catalog No. UPC No. Packed Size Stopper Tip
Pack Weight
lb g
Pack
Quantity
A3LL 037103176950 Bagged 3CC Rubber Luer Lok™ 0.144 4.1 20
A3LLPS 037103176967 Bagged 3CC Plastic Luer Lok™ 0.117 3.3 20
A5LL 037103176974 Bagged 5CC Rubber Luer Lok™ 0.206 5.8 20
A5LLPS 037103178268 Bagged 5CC Plastic Luer Lok™ 0.156 4.4 20
A6T 037103177537 Bagged 6CC Rubber Tapered 0.221 6.3 20
A10LL 037103178244 Bagged 10CC Rubber Luer Lok™ 0.232 6.6 15
A10LLPS 037103176912 Bagged 10CC Plastic Luer Lok™ 0.181 5.1 15
A30LL 037103176936 Bagged 30CC Rubber Luer Lok™ 0.370 10.5 10
A30LLPS 037103176943 Bagged 30CC Plastic Luer Lok™ 0.268 7.6 10
A30T 037103177490 Bagged 30CC Rubber Tapered 0.334 9.5 10
Catalog No. UPC No. Packed Size Stopper Tip
Pack Weight
lb g
Pack
Quantity
M1LASSM 037103177049 Bagged 1CC Rubber Luer Slip™ 0.152 4.3 20
M1BA 037103177056 Boxed 1CC Rubber Luer Slip™ 16.000 453.3 3000
M3LLASSM 037103177131 Bagged 3CC Rubber Luer Lok™ 0.179 5.1 20
M3LLASSM100 037103177148 Bagged 3CC Rubber Luer Lok™ 0.759 21.5 100
M3LLBA 037103177155 Boxed 3CC Rubber Luer Lok™ 13.700 388.1 1600
M5LLASSM 037103177230 Bagged 5CC Rubber Luer Lok™ 0.261 7.4 20
M5LLBA 037103177254 Boxed 5CC Rubber Luer Lok™ 18.360 520.1 1400
M10LLASSM 037103176998 Bagged 10CC Rubber Luer Lok™ 0.294 8.3 15
M10LLBA 037103177025 Boxed 10CC Rubber Luer Lok™ 16.650 471.7 850
M20LLBA 037103177070 Boxed 20CC Rubber Luer Lok™ 11.890 336.8 325
M30LLASSM 037103177094 Bagged 30CC Rubber Luer Lok™ 0.452 12.8 10
M30LLBA 037103177100 Boxed 30CC Rubber Luer Lok™ 11.160 316.2 225
M50LLASSM 037103178251 Bagged 50CC Rubber Luer Lok™ 0.412 11.7 5
M50TASSM 037103177209 Bagged 50CC Rubber Tapered 0.419 11.9 5
M50TBA 037103177216 Boxed 50CC Rubber Tapered 11.140 315.6 125
Catalog No. UPC No. Packed Size Stopper Tip
Pack Weight
lb g
Pack
Quantity
M5LL 037103177223 Bagged 5CC Rubber Luer Lok™ 0.280 7.9 20
M6T 037103177612 Bagged 6CC Rubber Tapered 0.307 8.7 20
M10LL 037103176981 Bagged 10CC Rubber Luer Lok™ 0.317 9.0 15
M30T 037103177575 Bagged 30CC Rubber Tapered 0.547 15.5 10
M50LL 037103177179 Bagged 50CC Rubber Luer Lok™ 0.459 13.0 5
SYRINGES
3 VERSIONS FOR MULTIPLE APPLICATIONS
AIR-OPERATED SYRINGES
NIndustrial syringes for micro-air dispensing
NAvailable in Luer Lok™ and tapered tip styles
NUnassembled and non-calibrated
NAvailable with rubber or plastic stoppers
NIncludes barrel and stopper
MANUAL UNASSEMBLED SYRINGES
NIncludes barrel, rubber stopper, and plunger rod
NAvailable in Luer Lok™ and tapered tip styles
NUnassembled and non-calibrated
MANUAL ASSEMBLED CALIBRATED SYRINGES
NIncludes graduated barrel, rubber stopper,
and plunger rod
NAvailable in Luer Slip™ and tapered
tip styles (50cc only)
Catalog No. UPC No. Packed Size Airline Diameter
Pack Weight
lb g
Pack
Quantity
KDS803S6 037103173928 Bagged 3CC 3/32" 2.4 mm 0.112 3.2 1
KDS805S6 037103173966 Bagged 5CC 3/32" 2.4 mm 0.143 4.1 1
KDS810S6 037103174017 Bagged 10CC 3/32" 2.4 mm 0.152 4.3 1
KDS830S6 037103174048 Bagged 30CC 3/32" 2.4 mm 0.216 6.1 1
Catalog No. UPC No. Packed Size Airline Diameter
Pack Weight
lb g
Pack
Quantity
KDS503S6 037103174093 Bagged 3CC 3/32" 2.4 mm 0.078 2.2 1
KDS505S6 037103174109 Bagged 5CC 3/32" 2.4 mm 0.094 2.7 1
KDS510S6 037103174130 Bagged 10CC 3/32" 2.4 mm 0.100 2.8 1
KDS530S6 037103174154 Bagged 30CC 3/32" 2.4 mm 0.113 3.2 1
Catalog No. UPC No. Packed Size
Pack Weight
lb g
Pack
Quantity
KDS810S 037103174000 Bagged 10CC Accommodates 3/32" Airline 0.112 3.2 1
KDS830S 037103174031 Bagged 30CC Accommodates 3/32" Airline 0.165 4.7 1
Catalog No. UPC No. Packed Size
Pack Weight
lb g
Pack
Quantity
KDS503S 037103178947 Bagged 3CC Accommodates 3/32" Airline 0.034 1.0 1
KDS510S 037103174123 Bagged 10CC Accommodates 3/32" Airline 0.049 1.4 1
KDS530S 037103174147 Bagged 30CC Accommodates 3/32" Airline 0.073 2.1 1
UNIVERSAL ADAPTERS
UNIQUE DESIGN WORKS WITH MOST MANUFACTURER’S SYRINGES
NCompatible with Luer Lok™, Luer Slip™, and tapered tip air operated syringes (see pages 79)
N360° swivel on adapter head for ease of motion
NUse with single component, two part, self-leveling, and nonself-leveling materials
NRequires minimal clean-up
NFour sizes fit from 3cc to 30cc syringes
NPlastic adapters are lightweight and low cost
NMetal adapters fit many odd size syringes
METAL ADAPTERS ASSEMBLIES
NMetal syringe adapter with 6’ air line and fitting
NPlugs directly into any Weller or Kahnetics shot meter
PLASTIC ADAPTER ASSEMBLIES
NPlastic syringe adapter with 6’ air line and fitting
NPlugs directly into any Weller or Kahnetics shot meter
METAL ADAPTER HEADS
NSyringe adapter head only - no air line
PLASTIC ADAPTER HEADS
NSyringe adapter head only - no air line
DISPENSING
80
DISPENSING
81
Catalog No. UPC No. Packed Size Component Type Tip Type
Pack Weight
lb g
Pack
Quantity
1L1 037103176691 Bagged 1CC Barrel Luer Slip™ 3.300 93.5 1000
1L2 037103176707 Bagged 1CC Rubber Stopper Luer Slip™ 0.662 18.8 1000
1L4 037103176714 Bagged 1CC Plunger Rod Luer Slip™ 1.271 36.0 1000
3LL1 037103176790 Bagged 3CC Barrel Luer Lok™ 4.563 129.3 1000
3LL1B 037103183286 Bagged 3CC Barrel Luer Lok™ 12.900 365.5 2500
3LL2 037103178213 Bagged 3CC Rubber Stopper Luer Lok™ 1.120 31.7 1000
3LL2M 037103184542 Bagged 3CC Manual Stopper Luer Lok™ 0.422 12.0 1000
3LL4B 037103183262 Bagged 3CC Plunger Rod Luer Lok™ 9.650 273.4 4000
5LL1 037103176868 Bagged 5CC Barrel Luer Lok™ 6.220 176.2 1000
5LL1B 037103183255 Bagged 5CC Barrel Luer Lok™ 11.750 332.9 1600
5LL2 037103176875 Bagged 5CC Rubber Stopper Luer Lok™ 2.570 72.8 1000
5LL2B 037103183248 Bagged 5CC Rubber Stopper Luer Lok™ 40.000 1133.2 15,000
5LL2M 037103176882 Bagged 5CC Manual Stopper Luer Lok™ 1.021 28.9 1000
5LL2PS 037103177445 Bagged 5CC Plastic Stopper Luer Lok™ 0.490 13.9 1000
5LL4 037103176899 Bagged 5CC Plunger Rod Luer Lok™ 5.050 143.1 1000
6T1 037103177452 Bagged 6CC Barrel Tapered 5.178 146.7 500
6T2 037103177469 Bagged 6CC Manual Stopper Tapered 0.695 19.7 500
6T4 037103177483 Bagged 6CC Plunger Rod Tapered 2.045 57.9 500
10LL1 037103176646 Bagged 10CC Barrel Luer Lok™ 10.350 293.2 1000
10T1 037103177308 Bagged 10CC Barrel Tapered 5.307 150.3 500
10LL2 037103176653 Bagged 10CC Rubber Stopper Luer Lok™ 3.995 113.2 1000
10LL2M 037103176660 Bagged 10CC Manual Stopper Luer Lok™ 4.300 121.8 1000
10LL2PS 037103177285 Bagged 10CC Plastic Stopper Luer Lok™ 0.997 28.2 1000
10LL4 037103176684 Bagged 10CC Plunger Rod Luer Lok™ 10.300 291.8 1000
30LL1PS 037103176745 Bagged 30CC Barrel for Plastic Stopper Luer Lok™ 12.645 358.2 600
30T1 037103177353 Bagged 30CC Barrel Tapered 14.983 424.5 500
30LL2PS 037103177346 Bagged 30CC Plastic Stopper Luer Lok™ 1.651 46.8 1000
30T2A 037103177360 Bagged 30CC Dry Air-operated Stopper Tapered 2.263 64.1 500
30T4 037103177384 Bagged 30CC Plunger Rod Tapered 12.555 355.7 500
30T3 037103177377 Bagged 30CC Tip Cap/30CC Tapered Barrel Tapered 0.194 5.5 100
50LL1 037103176820 Bagged 50CC Barrel Luer Lok™ 16.820 476.5 375
50LL1GRAD 037103178220 Bagged 50CC Barrel with Graduations Luer Lok™ 17.310 490.4 375
50LL2 037103176844 Bagged 50CC Rubber Stopper Luer Lok™ 17.550 497.2 1000
50LL4 037103178237 Bagged 50CC Plunger Rod Luer Lok™ 19.890 563.5 600
SYRINGE COMPONENTS
SUPPLIED IN BULK QUANTITIES
NDisposable un-assembled non-calibrated components
NPlastic or lubricated rubber stoppers
NLuer Slip™ (1cc), Luer Lok™, and tapered tip styles
NEEDLES
LARGE SELECTION OF SIZES, GAUGES,
AND PACKAGING OPTIONS
NSelection includes non-sterile blunt stainless steel needles with plastic hubs,
and one-piece plastic tapered tip needles)
NAll needles lock on to Luer Lok™ style syringes
NNeedle covers, and scabbards are also available
STAINLESS STEEL PLASTIC HUB DISPENSING NEEDLES
NSizes range from 14 through 30 gauge
NLengths range from 1/2” (12.7mm) to 1 1/2” (38.1mm)
ID OD Length Pack Pack Weight
Catalog No. UPC No. Packed Gauge Inch mm Inch mm Inch mm Quantity Hub Color lb g
KDS141BT 037103174758 Bagged 14 0.067 1.70 0.083 2.11 1 25.40 1000 Dark Green 1.111 31.5
KDS141P 037103174765 Bagged 14 0.067 1.70 0.083 2.11 1 25.40 50 Dark Green 0.076 2.2
KDS1412BT 037103174727 Bagged 14 0.067 1.70 0.083 2.11 1/2 12.70 1000 Dark Green 0.746 21.1
KDS1412P 037103174734 Bagged 14 0.067 1.70 0.083 2.11 1/2 12.70 50 Dark Green 0.076 2.2
KDS1512BT 037103174833 Bagged 15 0.060 1.52 0.072 1.83 1/2 12.70 1000 Orange 0.781 22.1
KDS1512P 037103174840 Bagged 15 0.060 1.52 0.072 1.83 1/2 12.70 50 Orange 0.049 1.4
KDS151P 037103174871 Bagged 15 0.060 1.52 0.072 1.83 1 25.40 50 Orange 0.065 1.8
KDS161BT 037103174987 Bagged 16 0.053 1.35 0.064 1.63 1 25.40 1000 Purple 0.892 25.3
KDS161P 037103174994 Bagged 16 0.053 1.35 0.064 1.63 1 25.40 50 Purple 0.056 1.6
KDS1612BT 037103174956 Bagged 16 0.053 1.35 0.064 1.63 1/2 12.70 1000 Purple 0.679 19.2
KDS1612P 037103174963 Bagged 16 0.053 1.35 0.064 1.63 1/2 12.70 50 Purple 0.048 1.4
KDS16112BT 037103174925 Bagged 16 0.053 1.35 0.064 1.63 1 1/2 38.10 1000 Purple 1.050 29.7
KDS16112P 037103174932 Bagged 16 0.053 1.35 0.064 1.63 1 1/2 38.10 50 Purple 0.064 1.8
KDS1712BT 037103181183 Bagged 17 0.045 1.14 0.060 1.52 1/2 12.70 1000 White 0.659 18.7
KDS1712P 037103175021 Bagged 17 0.045 1.14 0.060 1.52 1/2 12.70 50 White 0.045 1.3
KDS1812BT 037103175113 Bagged 18 0.038 0.97 0.050 1.27 1/2 12.70 1000 Pink 0.620 17.6
KDS1812P 037103175120 Bagged 18 0.038 0.97 0.050 1.27 1/2 12.70 50 Pink 0.048 1.4
KDS181BT 037103178176 Bagged 18 0.038 0.97 0.050 1.27 1 25.40 1000 Pink 0.725 20.5
KDS181P 037103175168 Bagged 18 0.038 0.97 0.050 1.27 1 25.40 50 Pink 0.048 1.4
KDS1912P 037103185877 Bagged 19 0.032 0.81 0.042 1.07 1/2 12.70 50 Brown 0.048 1.4
KDS191BT 037103175274 Bagged 19 0.032 0.81 0.042 1.07 1 25.40 1000 Brown 0.678 19.2
KDS191P 037103175281 Bagged 19 0.032 0.81 0.042 1.07 1 25.40 50 Brown 0.048 1.4
KDS2012BT 037103175342 Bagged 20 0.026 0.66 0.035 0.89 1/2 12.70 1000 Yellow 0.586 16.6
KDS2012P 037103175359 Bagged 20 0.026 0.66 0.035 0.89 1/2 12.70 50 Yellow 0.040 1.1
KDS201BT 037103175373 Bagged 20 0.026 0.66 0.035 0.89 1 25.40 1000 Yellow 0.637 18.0
KDS201P 037103175380 Bagged 20 0.026 0.66 0.035 0.89 1 25.40 50 Yellow 0.045 1.3
KDS20112BT 037103175304 Bagged 20 0.026 0.66 0.035 0.89 1 1/2 38.10 1000 Yellow 0.768 21.8
KDS2112BT 037103175441 Bagged 21 0.023 0.58 0.032 0.89 1/2 12.70 1000 Green 0.554 15.7
KDS2112P 037103175458 Bagged 21 0.023 0.58 0.032 0.89 1/2 12.70 50 Green 0.041 1.2
KDS211P 037103175489 Bagged 21 0.023 0.58 0.032 0.89 1 25.40 50 Green 0.043 1.2
KDS2212BT 037103175526 Bagged 22 0.019 0.48 0.028 0.71 1/2 12.70 1000 Black 0.558 15.8
KDS2212P 037103175533 Bagged 22 0.019 0.48 0.028 0.71 1/2 12.70 50 Black 0.043 1.2
KDS221BT 037103175564 Bagged 22 0.019 0.48 0.028 0.71 1 25.40 1000 Black 0.650 18.4
KDS221P 037103175571 Bagged 22 0.019 0.48 0.028 0.71 1 25.40 50 Black 0.045 1.3
KDS2312BT 037103175625 Bagged 23 0.017 0.43 0.025 0.64 1/2 12.70 1000 Light Blue 0.565 16.0
KDS2312P 037103175632 Bagged 23 0.017 0.43 0.025 0.64 1/2 12.70 50 Light Blue 0.042 1.2
KDS2512BT 037103175762 Bagged 25 0.012 0.30 0.020 0.51 1/2 12.70 1000 Blue 0.519 14.7
KDS2512P 037103175779 Bagged 25 0.012 0.30 0.020 0.51 1/2 12.70 50 Blue 0.040 1.1
KDS2612BT 037103175830 Bagged 26 0.010 0.25 0.018 0.46 1/2 12.70 1000 Tan 0.520 14.7
KDS27516BT 037103181336 Bagged 27 0.008 0.20 0.015 0.38 5/16 7.94 1000 Grey 0.496 14.4
KDS2712BT 037103181312 Bagged 27 0.008 0.20 0.015 0.38 1/2 12.70 1000 Grey 0.536 15.2
KDS3012BT 037103175953 Bagged 30 0.006 0.15 0.012 0.30 1/2 12.70 1000 Lavender 0.483 13.7
KDS3012P 037103175960 Bagged 30 0.006 0.15 0.012 0.30 1/2 12.70 50 Lavender 0.039 1.1
KDS660 037103176004 Bagged 1 Assorted 1.779 50.4
KDSSAMPLEPAC 037103176011 Bagged 1 Assorted 0.012 0.03
DISPENSING
82
DISPENSING
83
TAPERED TIP NEEDLES
NSizes range from 14 through 24 gauge
NLength is 1 1/2” (38.1mm)
NTaper reduces dripping from needle
NPlastic material won’t scratch delicate surfaces
TIP CAPS AND NEEDLE SCABBARDS
NUsed to seal needles and syringes when not in use
NLuer Lok™ and press fit styles available for all styles of syringes
MISCELLANEOUS ACCESSORIES
KDS805FS Finger Switch for Shot Meters
NPlugs in to KDS808, KDS834, and KDS824 series Shot Meters
NReplaces the foot pedal as method of actuation
KDS816 Syringe Holder Stand
NCompatible with all sizes of syringes and adapters
NKeeps syringe upright - preventing accidental flow of
material back up the air line
NKeeps work bench neat and clean
ID Pack Pack Weight
Catalog No. UPC No. Packed Gauge Inch mm Quantity Hub Color lb g
KDS14TN25 037103176356 Bagged 14 0.063 1.60 25 Salmon 0.015 0.4
KDS14TNP 037103176363 Bagged 14 0.063 1.60 50 Salmon 0.050 1.4
KDS14TN 037103176349 Bagged 14 0.063 1.60 100 Salmon 0.062 1.8
KDS16TN25 037103176387 Bagged 16 0.048 1.22 25 Grey 0.015 0.4
KDS16TNP 037103176400 Bagged 16 0.048 1.22 50 Grey 0.050 1.4
KDS16TNB 037103179012 Bagged 16 0.048 1.22 1000 Grey 0.490 13.9
KDS18TN25 037103176424 Bagged 18 0.034 0.86 25 Green 0.015 0.4
KDS18TNP 037103176431 Bagged 18 0.034 0.86 50 Green 0.045 1.3
KDS18TN 037103176417 Bagged 18 0.034 0.86 100 Green 0.058 1.6
KDS18TNB 037103179029 Bagged 18 0.034 0.86 1000 Green 0.475 13.5
KDS20TN25 037103176455 Bagged 20 0.024 0.61 25 Pink 0.015 0.4
KDS20TNP 037103176479 Bagged 20 0.024 0.61 50 Pink 0.041 1.2
KDS20TN 037103176448 Bagged 20 0.024 0.61 100 Pink 0.058 1.6
KDS20TNB 037103179043 Bagged 20 0.024 0.61 1000 Pink 0.460 13.0
KDS22TN25 037103176493 Bagged 22 0.017 0.43 25 Blue 0.015 0.4
KDS22TNP 037103176509 Bagged 22 0.017 0.43 50 Blue 0.043 1.2
KDS22TN 037103176486 Bagged 22 0.017 0.43 100 Blue 0.058 1.6
KDS22TNB 037103179050 Bagged 22 0.017 0.43 1000 Blue 0.450 12.7
Pack Weight
Catalog No. UPC No. Packed Description lb g Quantity
5227K 037103176639 Bagged Plastic Tip Cap 0.053 1.5 100
KDS20SC 037103176592 Bagged Needle Scabbard, 20 Gauge 0.039 1.1 100
982 037103176615 Bagged Rubber Stopper 0.095 2.7 100
SKDS1TCCH – Bagged Clear Plastic Cap 0.053 1.5 100
SKDS125TCCH – Bagged Soft Black Plastic Tip Cap 0.053 1.5 100
Pack Weight Pack
Catalog No. UPC No. Descriptionr lb g Quantity
KDS805FS 037103178077 Finger Switch for Shot Meters 0.147 4.2 1
KDS816 037103178091 Syringe Holder Stand 0.620 17.2 1
INDEX
84
Cat. No. Page No. Cat. No. Page No. Cat. No. Page No. Cat. No. Page No.
0053657399 ..........................51
0053657499 ..........................52
0053657599 ..........................52
0053657699 ..........................50
0053657799 ..........................51
0053657899 ..........................51
0053658099 ..........................51
0053659099 ..........................53
0053659199 ..........................52
0053659299 ..........................52
0053659399 ..........................53
0053659499 ..........................53
0053659599 ..........................53
0053659799 ..........................57
0053659899 ..........................51
0054450199 ............................5
0054450299 ............................5
0054450399 ............................5
0058727772 ..........................33
0058727773 ..........................33
0058727774 ..........................33
0058727777 ..........................33
0058727778 ..........................33
0058727779 ..........................33
0058727780 ..........................33
0058727781 ..........................33
0058727782 ..........................33
0058727783 ..........................33
0058727784 ..........................33
0058727785 ..........................33
0058727786 ..........................33
0058727787 ..........................33
0058727821 ..........................33
0058727822 ..........................33
0058727823 ..........................33
0058735313 ..........................50
0058735427 ..........................50
0058735831 ..........................50
0058735832 ..........................50
0058735833 ..........................50
0058735835 ..........................53
0058735836 .................... 53, 57
0058735837 .................... 53, 57
0058735838 .................... 53, 57
0058735840 ..........................53
0058735845 ..........................51
0058735847 ..........................50
0058735848 ..........................50
0058735855 ..........................59
0058735856 ..........................59
0058735860 ..........................53
0058735863 ..........................59
0058735864 ..........................59
0058735865 ..........................57
0058735866 ..........................57
0058735869 ..........................59
0058735870 ..........................59
0058735871 ..........................59
0058735879 ..........................50
0058735883 ..........................53
0058735884 ..........................53
0058735885 ..........................53
0058735895 ..........................53
0058735909 ..........................53
0058735915 ..........................53
0058735920 ..........................53
0058735924 ..........................53
0058736804 ..........................41
0058736807 ..........................41
0058736814 ..........................41
0058736818 ..........................41
0058736819 ..........................41
0058736833 ..........................41
0058736836 ..........................41
33 ..........................................64
37UG ............................... 63, 64
100UG ................................... 65
333 ........................................65
360 ........................................64
362 ........................................64
363 ........................................64
533S .....................................64
535S .....................................64
537S ...............................63, 64
1080 ......................................69
1082 ......................................69
1085 ......................................69
1095 ......................................69
1233S ...................................64
1235S ...................................64
1237S .............................63, 64
4033S ...................................64
4035S ...................................64
4037S .............................63, 64
4039S ...................................64
6956 ......................................69
6957 ......................................69
6958 ......................................69
6959 ......................................69
6964 ......................................69
6965A ...................................69
6966C ...................................69
7155 ......................................65
7400 ................................ 63, 64
7500 ................................ 63, 64
7760 ................................ 63, 64
7770 ................................ 63, 64
7805 ......................................71
7874B ...................................73
7875B ...................................73
7880 ......................................73
7881 ......................................73
7882BK ................................. 73
7883 ......................................73
0051303199 ..........................74
0051382499 ..........................74
0051502699 ..........................73
0051503099 ..........................56
0051504899 ..........................37
0051504999 ..........................37
0051506599 ..........................56
0051506699 ..........................56
0051512499 ..........................74
0051515699 ..........................56
0052512599 ..........................56
0052541000 ..........................56
0052916699 ..........................56
0052918599 ..........................56
0052918699 ..........................56
0053119099 ..........................37
0053119199 ..........................53
0053631699 ..........................57
0053631999 ..........................59
0053632199 ..........................59
0053632299 ..........................59
0053632399 ..........................59
0053632499 ..........................59
0053632699 ..........................57
0053632999 ..........................59
0053633899 ..........................57
0053634399 ..........................57
0053634499 ..........................59
0053638099 ..........................51
0053640799 ..........................57
0053641099 ..........................57
0053641400 ..........................57
0053641599 ..........................57
0053642199 ..........................57
0058736837 ..........................41
0058736838 ..........................41
0058736839 ..........................41
0058736840 ..........................41
0058736841 ..........................41
0058736842 ..........................41
0058736843 ..........................41
0058736857 ..........................41
0058736858 ..........................41
0058736867 ..........................41
0058736870 ..........................41
0058736873 ..........................41
0058736876 ..........................41
0058736877 ..........................41
0058736880 ..........................41
0058736881 ..........................41
0058736882 ..........................41
0058736883 ..........................41
0058736890 ..........................41
0058736891 ..........................41
0058736892 ..........................41
0058736998 ..........................41
0058736999 ..........................41
0058741815 ..........................26
0058744710 ............................5
0058744845 ........................ 5, 9
0058744846 ........................ 5, 9
0058744875 ..........................56
0058744876 ..........................56
0058750709 ..........................41
0058750714 ..........................41
0058750721 ..........................41
0058751710 ............................7
0058754873 ..........................36
0058754924 ..........................36
0058755741 ..........................36
0058755745 ..........................36
0058755782 ..........................37
0058762701 ..........................53
0058762750 ..........................52
0058762753 ..........................52
AK20 .....................................56
AK51 .....................................18
AKFE11 .................................. 56
CP01 .....................................72
CT5A7 ...................................62
CT5A8 ...................................62
CT5B8 ................................... 62
CT5C7 ................................... 62
CT5C8 ................................... 62
CT5D7 ................................... 62
CT5D8 ................................... 62
CT5E7 ....................................62
CT5E8 ....................................62
CT6C6 ................................... 62
CT6C7 ................................... 62
CT6C8 ................................... 62
CT6D6 ................................... 62
CT6D7 ................................... 62
CT6D8 ................................... 62
CT6E6 ....................................62
CT6E7 ....................................62
CT6E8 ....................................62
CT6F6 .................................... 62
CT6F7 .................................... 62
CT6F8 .................................... 62
CT6F9 .................................... 62
CT6G7 ...................................62
D550 .....................................70
D650 .....................................70
Desoldering Tiplets ................ 32
DX110 ...................................32
DX111 ...................................32
DX112 ...................................32
DX113 ...................................32
DX113HM ..............................32
DX114 ...................................32
DX115 ...................................32
DX116 ...................................32
DX117 ...................................32
DX118 ...................................32
DX119 ...................................32
DX120 ...................................32
DXV80 ............................. 26, 27
EC234 ...................................75
ESF120ESD ...........................73
ETA ........................................ 23
ETAA ......................................23
ETB ........................................23
ETBB .....................................23
ETC ........................................23
ETCC .....................................23
ETD .......................................23
ETDD .....................................23
ETH .......................................23
ETJ ........................................ 23
ETK ........................................ 23
ETKN ..................................... 23
ETL ........................................23
ETM ....................................... 23
ETO .......................................23
ETP ........................................23
ETR ........................................23
ETS ........................................ 23
ETT ........................................ 23
ETU ........................................23
ETV ........................................ 23
FD2 .......................................71
FD2D .....................................71
FD3 .......................................71
FD21D ...................................71
FE75 .......................... 17, 19, 56
GT7A ..................................... 70
HAP1 ............................... 39, 40
Hot Air Nozzles ....................... 33
K111 .....................................72
K181 .....................................72
K191 .....................................72
K1101 ...................................72
K1111 ...................................72
K1121 ...................................72
KDS301 .................................78
KDS503S ...............................80
KDS503S6 .............................80
KDS505S6 .............................80
KDS510S ...............................80
KDS510S6 .............................80
KDS530S ...............................80
KDS530S6 .............................80
KDS803S6 .............................80
KDS805S6 .............................80
KDS806(V) ............................. 77
KDS808 .................................77
KDS810S ...............................80
KDS810S6 .............................80
KDS824A ...............................76
KDS830S ...............................80
KDS830S6 .............................80
KDS834A ...............................76
KDSDELUXEKIT ......................78
LHTD .....................................18
LHTD45 .................................18
LHTDX ...................................18
LHTE ...................................... 18
LHTEX .................................... 18
LHTF ......................................18
LHTFX ....................................18
LT1 ..........................................5
Cat. No. Page No. Cat. No. Page No. Cat. No. Page No. Cat. No. Page No.
INDEX
85
LT1L ........................................ 5
LT1LX ...................................... 5
LT1S ........................................5
LT1SLX ....................................5
LT1X ........................................5
LT4X ........................................5
LTA .......................................... 5
LTAS ........................................5
LTAX ........................................5
LTB ..........................................5
LTC ..........................................5
LTCS ........................................ 5
LTD ..........................................5
LTF .......................................... 5
LTH .......................................... 5
LTHX ........................................ 5
LTK ..........................................5
LTKN ........................................ 5
LTL .......................................... 5
LTM .........................................5
LTS ..........................................5
MP131 ................................... 63
MP133 ................................... 63
MPR80 ............................17, 19
Needles .................................82
NT1 ................................... 7, 20
NT1S .......................................7
NT1X ....................................... 7
NT4 ......................................... 7
NT6 ......................................... 7
NTA .........................................7
NTAX .......................................7
NTB ......................................... 7
NTC ......................................... 7
NTD .........................................7
NTGW ......................................7
NTH .........................................7
NTK .........................................7
P2C .......................................67
P2KC ..................................... 67
PES51 .............................. 21, 22
PH50 ............................... 21, 22
PH60 ..................................... 61
PH100 ................................... 61
PH1201ESD ...........................24
Pipe Systems .........................59
PL100 ....................................65
PL111 .............................. 63, 65
PL113 .............................. 63, 65
PL114 ....................................65
PL133 .............................. 63, 65
PL138 ....................................65
PL151 ....................................65
PL153 ....................................65
PL155 ....................................65
PL331 ....................................65
PL333 ....................................65
PL338 ....................................65
PL350 ....................................65
PPT1 ...................................... 67
PPT2 ...................................... 67
PPT5 ...................................... 67
PPT6 ...................................... 67
PSI1 ....................................... 66
PSI2 ....................................... 66
PSI3 ....................................... 66
PSI4 ....................................... 66
PSI5 ....................................... 66
PSI6 ....................................... 66
PSI7 ....................................... 66
PSI8 ....................................... 66
PSI9 ....................................... 66
PSI10 ..................................... 66
PSI100C ................................66
PSI100K .................................66
PTA6 ......................................25
PTA7 .......................... 24, 25, 61
PTA8 ......................................25
PTAA7 ....................................25
PTAA8 ....................................25
PTB7 .....................................25
PTB8 .....................................25
PTBB7 ................................... 25
PTBB8 ................................... 25
PTC7 .....................................25
PTC8 .....................................25
PTCC7 ................................... 25
PTCC8 ................................... 25
PTD7 ..................................... 25
PTD8 ..................................... 25
PTDD7 ...................................25
PTDD8 ...................................25
PTE8 ......................................25
PTF7 ...................................... 25
PTF8 ...................................... 25
PTH6 .....................................25
PTH7 .....................................25
PTH8 .....................................25
PTJ7 ......................................25
PTJ8 ......................................25
PTK7 ......................................25
PTK8 ...................................... 25
PTL7 ...................................... 25
PTL8 ...................................... 25
PTM7 .....................................25
PTM8 .....................................25
PTO6 ..................................... 25
PTO7 ..................................... 25
PTO8 ..................................... 25
PTP6 ...................................... 25
PTP7 ...................................... 25
PTP8 ...................................... 25
PTR6 .....................................25
PTR7 .....................................25
PTR8 .....................................25
PTS7 ......................................25
PTS8 ......................................25
PU120T .................................24
RT1 ........................................14
RT1MS ...................................15
RT1SC ...................................14
RT1SCMS ..............................15
RT2 ........................................14
RT2MS ...................................15
RT3 ..................................14, 20
RT3MS ...................................15
RT4 ........................................14
RT4MS ...................................15
RT5 ........................................14
RT5MS ...................................15
RT6 ........................................14
RT6MS ...................................15
RT7 ........................................14
RT7MS ...................................15
RT8 ........................................14
RT8MS ...................................15
RT9 ........................................14
RT9MS ...................................15
RT10 ......................................14
RT10MS .................................15
RT11MS .................................15
RTW1 .....................................14
RTW1MS ................................15
RTW2 .....................................14
RTW2MS ................................15
RTW3 .....................................14
RTW3MS ................................15
RTW4 .....................................14
RTW4MS ................................15
SD74 ..................................... 71
SD74H ................................... 71
SL325 .............................. 63, 64
SL335 .............................. 63, 64
SL345 .............................. 63, 64
SL500 .............................. 63, 64
SM1 .......................................74
ST1 ........................................62
ST2 ........................................62
ST3 ........................................62
ST4 ........................................62
ST5 ........................................62
ST6 ........................................62
ST7 ........................................62
ST8 ........................................62
SW60 ....................................75
Syringe Components ..............81
Syringes ................................ 79
TC201T ...................... 24, 56, 75
TC217 ...................................75
TCP12P .................................61
Thermal Tweezer Tips ............32
Universal Adapters ................. 80
W60P ......................... 56, 61, 62
W60P3 ...................................61
W100P ...................................62
W100P3 .................................61
W100PG .......................... 56, 61
W58713798 ...........................41
W58713799 ...........................41
WA2000 .................................72
WAD101 ................................ 40
WB1 ......................................67
WB2 ......................................67
WBH2 .................................... 73
WBHS .............................. 34, 36
WCB1 ....................................26
WD1 ............................ 4, 6, 8, 9
WD1M ............................. 11, 16
WD2 ........................................8
WD2M ............................. 16, 18
WD1000HPT ........................6, 9
WD1000M ....................... 11, 16
WD1001 .............................. 6, 8
WD1002 .............................. 4, 9
WD1002T ............................ 4, 9
WD2000M ....................... 12, 16
WD2M ................................... 18
WDC ......................................74
WDC2 ....................................74
WDD81X ................................26
WDH10 .............................. 9, 20
WDH10T .............................. 4, 9
WDH20 .............................. 8, 20
WDH40 ...................... 26, 27, 28
WDH50 ...................... 12, 16, 20
WES51 ...................................21
WES51PU ..............................21
WESD51 ................................22
WESD51PU ............................22
WFE2ES ................................. 48
WFE2P ....................... 19, 54, 58
WFE2S ............................. 47, 49
WFE2X ................................... 46
WFE4S ............................. 45, 49
WFE8S ...................................44
WFE20D ..........................55, 58
WHA900 ................................38
WHA3000P ................ 34, 35, 37
WHA3000PS .................... 34, 36
WHA3000V ...................... 35, 37
WHC51 .................................. 68
WHC52 .................................. 68
WHC54 .................................. 68
WHP80 ............................ 17, 18
WHP200 ................................ 42
WHP1000 .............................. 43
WHP3000 .................. 34, 35, 36
WLSK200 ...............................74
WM120 .................................. 63
WMP ............................ 8, 17, 20
WMRP ............12, 14, 16, 17, 20
WMRPMS ........................15, 17
WMRT .............12, 14, 16, 17, 18
WMRTH ..................... 12, 16, 18
WMRTMS ......................... 15, 17
WP25 ............................... 61, 62
WP30 ......................... 56, 61, 62
WP35 ......................... 56, 61, 62
WP80 ....................... 4, 9, 17, 20
WP120 ................... 9, 10, 17, 19
WPA2 .....................................68
WPB1 ....................................74
WPT1 ..................................... 68
WPT2 ..................................... 68
WPT5 ..................................... 68
WPT8 ..................................... 68
WPT11 ................................... 68
WPT13 ................................... 68
WPT15 ................................... 68
WR2 ......................................27
WR2000 ................................39
WR2000VX ............................28
WR2000X ..............................27
WR3000M .............................29
WSA350 ................................60
WSA350F ...............................60
WSB80 ............................ 17, 19
WSB150 .......................... 17, 19
WSM1 ....................................13
WSM1C .................................13
WSP80 ............................17, 20
WSP150 ..........................17, 18
WST2 .....................................68
WSTA3 ................................... 68
WSTA6 ................................... 68
WTA1 ............................... 18, 32
WTA2 .....................................32
WTA3 .....................................32
WTA4 .....................................32
WTA5 .....................................32
WTA50 ............................. 17, 18
WTCPT ...................................24
XTA ........................................10
XTAA ......................................10
XTAL ......................................10
XTB .......................................10
XTBB ..................................... 10
XTBS .....................................10
XTC .......................................10
XTCC ..................................... 10
XTCS .....................................10
XTD ....................................... 10
XTDS .....................................10
XTE ........................................10
XTF ........................................ 10
XTGW ....................................10
XTH .......................................10
XTKN .....................................10
XTM .......................................10
XTO ....................................... 10
eller, the name synonymous with rework technology innovation, is
once again leading the way with application solutions to your most
complex electronics manufacturing challenges...
Ř 2XUWLSIXPHH[WUDFWLRQDQGYROXPHIXPHH[WUDFWLRQV\VWHPVDUHSHUIHFW
examples of Weller responding to current industry trends and anticipating
the future direction of occupational safety and health awareness.
Ř 6\VWHPVFHQWHUHGRQRXU:3VROGHULQJSHQFLORIIHUWKHLQFUHDVHGSRZHU
needed for the latest high-mass PCBs.
Ř ,QQRYDWLYH:HOOHUHQJLQHHULQJKDVH[WHQGHGWLSOLIHRIIHULQJVDYLQJVWR
manufacturers striving to win in today’s more competitive marketplace.
Ř :HOOHULQYHVWPHQWVLQEDWWHU\VROGHULQJWHFKQRORJ\KDYH\LHOGHGFRUGOHVVSRUWDEOH
products that offer impressive performance with equally impressive battery life.
Your Weller sales representative can help you increase
productivity, reduce costs, and improve safety. And all Weller
representatives are supported by a staff of highly experienced
technical experts who can analyze your soldering applications
and offer a system solution that will not only answer the current challenge, but
address future ones. Find out more. Contact Weller at www.apextoolgroup.com.
THE WELLER ADVANTAGE
W
Update photo
replace w/
6966C
CT10-12057/PP-84026/15M/Printed 01/11/USA Apex Tool Group No. T550805 © 2011, Apex Tool Group, LLC
Specifications subject to change without notice.
1460 0 York Road, Suite A
Sparks, MD 21152
www.apextoolgroup.com
Acuna Tools Corp
3100 NW 72 AVE
Suite 103
Miami, FL 33122
Tel: (305) 592-4438
Judy@acunatools.com