E3A2 E3A2 AC/DC Supply with Timer Models E3A2 Slim Sensor with Plug-in Outputs, Built-in Time Delays Plug-in replaceable outputs Light-ON/Dark-ON operation, switch selectable Optional solid-state outputs Polarized diffuse and through-beam models Timer models provide selectable ON-delay, OFF-delay and one-shot outputs Standard with 3 A relay output Ordering Information SENSORS Method of detection Through-beam Retroreflective Diffuse reflective Sensing distance 10 m (32.8 ft) 3 m (9.8 ft) 70 cm (27.6 in) Part number Without timer E3A2-10M4 E3A2-R3M4 E3A2-DS70M4 ON-delay, OFF-delay, one-shot equal ON- and OFF-delays (0.1 to 5 seconds) E3A2-10M4T E3A2-R3M4T E3A2-DS70M4T Independent ON-delays and OFF-delays (0.1 to 5 seconds) E3A2-10M4D E3A2-R3M4D E3A2-DS70M4D ACCESSORIES Description Solid-state output modules Part number AC (SCR) output module; 200 mA, 250 VAC max. load G3K-2R2P-1 DC NPN output module; 200 mA, 30 VDC max. load, dual complementary G3KD-YR2P-1 DC PNP output module; 200 mA, 30 VDC max. load, dual complementary G3KD-YR2P-2 Reflector adapter for stud-mounting E39-R1 reflector E39-L7 REPLACEMENT PARTS Description Part number Relay output module, SPDT, 3 A at 250 VAC (output supplied with each sensor) G6C-2117P-DC8 Reflector (supplied with retroreflective sensor) E39-R1 Mounting bracket (supplied with each sensor) E39-L34 2 E3A2 E3A2 Specifications Part number E3A2-10 E3A2-R3 E3A2-DS70 Method of detection Through-beam Retroreflective Diffuse reflective Supply voltage Power consumption 24 to 240 VAC, 50/60 Hz; 12 to 240 VDC Relay output type Emitter: 0.82 W max. Receiver: 1.2 W max. 1.5 W max. Emitter: 0.82 VA max. Receiver: 1.2 VA max. 2 VA max. Sensing distance 10 m (32.8 ft) 3 m (9.8 ft) with E39-R1 reflector (included) 70 cm (27.6 in) with 10 x 10 cm (3.94 x 3.94 in) 90% reflectance white mat paper Light source Pulse modulated infrared LED (950 nm) Pulse modulated red LED, polarized (680 nm) Pulse modulated infrared LED (950 nm) Detectable object type Opaque materials, 26 mm (1.02 in) minimum dimension Opaque and mirror surface materials, 56 mm (2.20 in) min. dimension Opaque and translucent materials DC solid-state output type AC solid-state output type Operation mode Light-ON/Dark-ON, switch selectable Sensitivity Fixed Adjustable Mutual interference protection Not provided Provided Control output SPDT with G6C-2117P-DC8 output module (standard) Relay Type Max. load 3 A, 250 VAC (p.f. = 1); 3 A, 30 VDC AC solidstate Type SCR with G3K-2R2P-1 output module (optional) Max. load 200 mA, 250 VAC DC solidstate Min. load 5 mA Max. inrush 2A Off-state leakage current 1 mA max. Type NPN-SPDT with G3KD-YR2P-1 output module (optional) PNP-SPDT with G3KD-YR2P-2 output module (optional) Max. load 200 mA, 30 VDC Max. on-state voltage drop 2 VDC at 200 mA Response time (ON and OFF) Relay 15 ms max. with G6C-2117P-DC8 output module (standard) Timing functions Circuit protection AC solid-state output 30 ms max. with G3KD-2R2P-1 output module (optional) DC solid-state 1 ms max. with G3KD-YR2P-1 or -2 output modules (optional) Type E3A2- T Normal, ON-delay, OFF-delay, one-shot or equal ON- and OFF-delays, switch selectable Type E3A2- D Independent ON- and OFF-delays Range 0.1 to 5 seconds Output short-circuit Provided (AC solid-state and DC solid-state output modules only) DC power supply reverse polarity Provided Indicators Materials Lens Case Mounting Connections Weight Emitter: Power On (red LED) Light Incident (red LED) and Output Stability (green LED); Receiver: Light Incident (red LED) and output stability (green LED); Output Operation (yellow LED) on timer-equipped models Output Operation (yellow LED) on timer-equipped models Plastic Plastic Side surface mount with two through holes; E39-L34 bracket and hardware included Conduit 1/2-14 NPT Wire Terminal screws Emitter: 200 g (7.1 oz) Receiver: 200 g (7.1 oz) 200 g (7.1 oz) (Table continues on the next page) 3 E3A2 E3A2 Specifications Table - continued from previous page E3A2-10 Part number E3A2-R3 Enclosure ratings NEMA IEC 144 IP66 Approvals UL Listed, File Number E41515 Ambient temperature Operating -25 to 55C (-13 to 131F) Storage -30 to 70C (-22 to 159F) E3A2-DS70 1, 4, 4X, 12 CONNECTIONS Through-Beam Type Retroreflective and Diffuse Reflective Types 24 to 240 VAC 12 to 240 VDC Light Source 24 to 240 VAC 12 to 240 VDC See Output Circuit Diagrams Receiver See Output Circuit Diagrams 24 to 240 VAC 12 to 240 VDC OUTPUT CIRCUIT DIAGRAMS Relay output AC solid-state output DC solid-state PNP output DC solid-state NPN output 4 E3A2 E3A2 TIMING CHART NOTE: 1. For sensors without built-in timer functions, operation follows the NORM mode shown with multifunction time delay models. 2. T1, T2 and T denote set time, variable within 0.1 to 5 second range. 3. For multifunction time delay models (part numbers ending in "T"), the ONand OFF-delay time settings will be the same. 4. For ON- and OFF-delay models (part numbers ending in "D"), T1 and T2 are independently variable. 5. O.S.D.: one shot delay 5 E3A2 E3A2 Engineering Data Through-Beam Type Retroreflective Type Diffuse Reflective Type Excess gain ratio Excess gain ratio Excess gain ratio EXCESS GAIN RATIO Distance [m (ft)] LIGHT SOURCE/RECEIVER SETTING RANGE Distance [m (ft)] Distance [cm (in)] REFLECTOR SETTING RANGE Retroreflective Type Distance Y [cm (in)] Distance Y [mm (in)] Through-Beam Type Distance X [m (ft)] OPERATING RANGE DETECTING DISTANCE VS. MINIMUM TARGET SIZE (AT MAXIMUM SENSITIVITY) Diffuse Reflective Type Distance Y [mm (in)] Detecting distance [cm (in)] Diffuse Reflective Type Distance X [m (ft)] Area of detectable object [cm2 (in2)] Distance X [cm (in)] 6 E3A2 E3A2 Dimensions Unit: mm (inch) LIGHT and STABILITY indicators LIGHT-ON/DARK-ON and function selector Mounting holes OPERATION indicator (Timer function equipped type only) 4-hexagonal spot facing width across flats: 8 (.31) depth: 4 (.16) 2-5.5 (.22) dia. mounting holes E39-R1 Reflector E39-L7 Reflector Adapter OMRON ELECTRONICS LLC OMRON ON-LINE OMRON CANADA, INC. One East Commerce Drive Schaumburg, IL 60173 Global - http://www.omron.com USA - http://www.omron.com/oei Canada - http://www.omron.com/oci 885 Milner Avenue Scarborough, Ontario M1B 5V8 1-800-55-OMRON Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. 416-286-6465 Printed in the U.S.A.