Embedded Device Server
Easily network-enable virtually any serial device
Flexible,well-developed IP protocol stack
Ethernet RJ45 (10Base-T) connector on the board
TTL serial interface
Two serial ports
Accepts 5VDC regulated input power
HTTP, Serial, Telnet and SNMP management
Flash ROM for easy software upgrades
Custom protocol support available
Building Ethernet connectivity into a product is no
simple task. It requires a significant investment in
hardware and software integration – often in areas
outside of core competencies. So why build it yourself
when there is a cost-effective alternative?
Lantronix embedded device networking products
provide proven, integrated hardware and software
solutions for manufacturers who want to add Ethernet
connectivity to their products.
Device networking starts with a Device Server™.
These amazing products allow most any device with
a serial port (TTL) to connect to Ethernet networks
quickly and cost-effectively. Device Servers include
all of the elements needed for device networking
a processor, real-time operating system (RTOS),
a robust TCP/IP stack, a web server and a network
connection. All the connected product needs is a
header, providing connections to power and a TTL
serial port.
The Micro brings over a decade of networking
experience, rock-solid IP firmware and extensive
applications support to industrial and commercial
environments.
Measuring only 1.6 in x 1.9 in, the Micro can easily fit
into almost any size serial device that would benefit
from network connectivity. A TTL connector provides
the serial interface, and an RJ45 (10BASE-T) is available
for Ethernet access. The Micro includes the same IP
protocol stack found on the other Lantronix products.
The Lantronix Micro is a board-level product for
OEM users who want to embed proven mainstream
Ethernet connectivity into their products quickly
and economically.
Design Ethernet Connectivity into Your Products
Quickly and Economically
Embedded Device Server™Micro
Embedded Device Server™Micro
15353 Barranca Parkway |Irvine |CA 92618 |USA |Tel: 800.526.8764 |Fax: 949.450.7249 |www.lantronix.com
©2006, Lantronix, Inc. Lantronix is a registered trademark and Device Server is a trademark of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications subject to
change without notice. All rights reserved. 910-300 05/06 DGS2500
Features
Protocols
ARP, UDP,TCP, Telnet,ICMP,SNMP,DHCP,TFTP and HTTP
Networking Interface
RJ45 (10Base-T) Ethernet
Serial Interface
TTL level (Asynchronous)
Data Rates
300 bps to 115.2 Kbps
Serial Line Formats
Characters: 7 or 8 data bits
Stop bits: 1 or 2
Parity: odd, even, none
Modem Controls
DTR, RTS, CTS, DCD
Flow Control
XON/XOFF (Software)
CTS/RTS (Hardware)
Management
HTTP
SNMP
Serial login
Telnet login
System Software
Flash ROM standard:
downloadable from a TCP/IP
host (TFTP) or over serial port
Diagnostic LEDs
Transmit Data
Receive Data
Good Link
Compatibility
Ethernet:Version 2.0/IEEE 802.3
Power Requirements
5VDC +/-5% at ~ 200mA
Memory
Flash: 512K
RAM: 128K
NVRAM: 2K Bytes
Environmental
Standard Temperature
0° to 70° C (32° to 158° F)
Storage Temperature
-40° to 85° C (-40° to 185° F)
Physical Dimensions (L x W)
49.15 x 40 mm (1.935 x 1.575 in)
Mechanical drawing available at www.lantronix.com
Warranty
1-year limited warranty
Board Layout and Pinouts
CON2 (RJ45)
Pin Con1
1TX+
2TX-
3RX+
4NC
5NC
6RX-
7NC
8NC
CON4 (2 x 4 pins in place of LEDs)
Pin Function
1 +5V
2 +5V
3 LED2
4 LED1
5 +5V
6 +5V
7 LED3
8 LED “good link”
Ordering Information
Contact your local Lantronix representative or Lantronix directly:
United States sales@lantronix.com or call OEM sales support at 800-526-8764.
Asia Pacific Region AsiaPacific_sales@lantronix.com
Europe eu_sales@lantronix.com
Japan japan_sales@lantronix.com
Latin America & Caribbean la_sales@lantronix.com
Part Number and Description
CO-E1-00AAR Micro with no RJ45 and LEDS, RoHS
CO-E1-11AAR Micro Device Server, Ethernet, RoHS
CO-E1-IAP-R Micro Industrial Protocol,RoHS
CO-E1M-00AAR Micro with no RJ45 and LEDS, with MODBUS Firmware, RoHS
CO-E1M-11AAR Micro with MODBUS Firmware, RoHS
CO-E2-00AB-R Micro Generic,2 Serial Port support with no RJ45 and LEDS, RoHS
CO-E2-113AAR Micro, 2 Serial Port support and TTL Header on back of board, RoHS
CO-E2-11AAR Micro with 2 Serial Port support, RoHS
CO-E2-12AA-R Micro with no LEDS, but instead, Header Pins on the TTL side, RoHS
CO-E2-21ABR Micro, Pin Header on TTL side instead of RJ45, RoHS
CO-E2-22AAR Micro with 2 TTL Channels, RoHS
CO-E2-22AB-R Micro with 2TTL Channel, RoHS
CO-E2-IAPR Micro 2 Channel IAP, RoHS
CON3 (2 x 2 pins in place of RJ45)
Pin Function
1TX+
2TX-
3RX+
4RX-
Drill 1
Drill 3
RJ45
(CON2)
TTL
(CON1)
Drill 2
1
3
5
7
9
11
LEDs
(CON 4)
Reset
Switch
CON1 (2 x 6 Pins)
Pin Function
1 +5V
2 GND
3 RXA (Input)
4 TXA (Output)
5 RTSA (Output)
6 DTRA (Output)
7 CTSA (Input)
8 DCDA (Input)
9 R/V/A (Output)
10 RESET to be pulled low
11 RXB (Input – optional)
12 TXB (Output – optional)
