VOW135, VOW136
www.vishay.com Vishay Semiconductors
Rev. 1.1, 26-Mar-15 1Document Number: 84156
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Widebody, High Isolation, High Speed Optocoupler, 1 MBd
DESCRIPTION
1 MBd widebody optocouplers consist of a GaAlAs infrared
emitting diode, optically coupled with an integrated photo
detector. An integral Faraday shield provides a high level of
noise isolation, required by high power switching
applications.
Vishay’s 1 MBd wide body couplers feature a high level of
isolation distance, exhibiting an external creepage distance
of > 10 mm. This makes these parts ideal for applications
with working voltages exceeding 1000 V.
FEATURES
External creepage > 10 mm
Reinforced isolation
Internal shield for very high input to output
noise isolation
High common mode interference immunity
Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
Solar inverters
Industrial motor drives
Welding equipment
Isolated industrial communications
Noise isolation of sensitive circuits
AGENCY APPROVALS
The safety application model number covering all products
in this datasheet is VOW135 or VOW136 respectively. This
model number should be used when consulting safety
agency documents.
UL1577
•cUL
DIN EN 60747-5-5 (VDE 0884-5)
•CQC
1
2
3
4
8
7
6
5
C (V
CC
)
NC
A
C
NC
B (V
B
)
C (V
O
)
E (GND)
22660
ORDERING INFORMATION
VOW13#-X0##T
PART NUMBER PACKAGE OPTION TAPE
AND
REEL
AGENCY CERTIFIED/PACKAGE CTR (%)
VDE, UL, cUL, CQC 7 19
DIP-8, 400 mil, widebody VOW135-X001 VOW136-X001
SMD-8, 400 mil, option 7, widebody VOW135-X017T VOW136-X017T
10.16 mm typ.
DIPW-8
0.75 mm
Option 7
VOW135, VOW136
www.vishay.com Vishay Semiconductors
Rev. 1.1, 26-Mar-15 2Document Number: 84156
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Fig. 1 - Maximum Power vs. Operating Temperature
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER CONDITIONS SYMBOL VALUE UNIT
INPUT
Reverse voltage VR3V
Forward current IF25 mA
Peak forward current t = 1 ms, duty cycle 50 % IFM 50 mA
Maximum surge forward current t 1 μs, 300 pulses/s IFSM 1A
Power dissipation Pdiss 45 mW
Input junction temperature Tj max. 125 °C
OUTPUT
Supply voltage VS-0.5 to 30 V
Output voltage VO-0.5 to 25 V
Emitter base voltage VEBO 5V
Average output current IO8mA
Peak output current IO16 mA
Base current IB5mA
Power dissipation Pdiss 100 mW
Output junction temperature Tj max. 125 °C
COUPLER
Storage temperature range Tstg -55 to +150 °C
Ambient temperature range Tamb -40 to +100 °C
Soldering temperature max. 10 s, dip soldering 0.5 mm
distance from case bottom Tsld 260 °C
0
20
40
60
80
100
0 25 50 75 100 125
Ptot - Total Power Dissipation (mW)
Tamb - Ambient Temperature (°C)
Output Detector
IR-LED
VOW135, VOW136
www.vishay.com Vishay Semiconductors
Rev. 1.1, 26-Mar-15 3Document Number: 84156
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Fig. 2 - Schematics
ELECTRICAL CHARACTERISTICS (Tamb = 0 °C to 70 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = 16 mA VF1.38 1.9 V
Breakdown voltage IR = 10 μA VBR 3V
Reverse current VR = 3 V IR0.5 10 μA
Input capacitance VR = 0 V, f = 1 MHz CI36 pF
Temperature coefficient of
forward voltage IF = 16 mA ΔVF/ΔTamb -1.9 mV/°C
OUTPUT
Logic low supply current IF = 16 mA, VO = open, VCC = 15 V ICCL 50 200 μA
Logic high supply current IF = 0 A, VO = open, VCC = 15 V ICCH 0.02 2 μA
Output voltage, output logic low IF = 16 mA, VCC = 4.5 V, IO = 0.8 mA VOW135 VOL 0.1 0.5 V
IF = 16 mA, VCC = 4.5 V, IO = 2.4 mA VOW136 VOL 0.1 0.5 V
Output current, output logic high IF = 0 mA, VO = VCC = 5.5 V IOH 3 500 nA
IF = 0 mA, VO = VCC =15 V IOH 0.01 1 μA
Output capacitance VR = 0 V, f = 1 MHz CO3.70 pF
COUPLER
Capacitance (input to output) f = 1 MHz CIO 0.9 pF
CURRENT TRANSFER RATIO (Tamb = 0 °C to 70 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
Current transfer ratio
IF = 16 mA, VO = 0.4 V,
VCC = 4.5 V, Tamb = 25 °C
VOW135 CTR 7 18 50 %
VOW136CTR192450%
IF = 16 mA, VO = 0.5 V, VCC = 4.5 V VOW135 CTR 5 19 %
VOW136 CTR 15 25 %
SWITCHING CHARACTERISTICS (Tamb = 0 °C to 70 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
High to low IF = 16 mA, VCC = 5 V, RL = 4.1 kΩVOW135 tPHL 0.2 2.0 μs
IF = 16 mA, VCC = 5 V, RL = 1.9 kΩVOW136 tPHL 0.2 1.0 μs
Low to high IF = 16 mA, VCC = 5 V, RL = 4.1 kΩVOW135 tPLH 1.3 2.0 μs
IF = 16 mA, VCC = 5 V, RL = 1.9 kΩVOW136 tPLH 0.6 1.0 μs
isfh6135_01
VOL
t
t
5V
1.5 V
VO
IF
tPLH
tPHL
1
2
3
4
8
7
6
5
IF
VO
RL
5V
Pulse generator
ZO=50Ω
tr,tf=5 ns
duty cycle 10 %
t100 µs
CL
15 pF
IFmonitor
100 Ω
VOW135, VOW136
www.vishay.com Vishay Semiconductors
Rev. 1.1, 26-Mar-15 4Document Number: 84156
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Common Mode Interference Immunity
Note
As per DIN EN 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance
with the safety ratings shall be ensured by means of protective circuits.
COMMON MODE TRANSIENT IMMUNITY (Tamb = 0 °C to 70 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
High VCM = 10 VPP, VCC = 5 V, IF = 0 mA, RL = 4.1 kΩVOW135 CMH1000 V/μs
VCM = 10 VPP, VCC = 5 V, IF = 0 mA, RL = 1.9 kΩVOW136 CMH1000 V/μs
Low VCM = 10 VPP, VCC = 5 V, IF = 16 mA, RL = 4.1 kΩVOW135 CML1000 V/μs
VCM = 10 VPP, VCC = 5 V, IF = 16 mA, RL = 1.9 kΩVOW136 CML1000 V/μs
SAFETY AND INSULATION RATINGS
PARAMETER SYMBOL VALUE UNIT
Climatic classification (according to IEC 68 part 1) 55/100/21
Comparative tracking index CTI 250
Maximum rated withstanding isolation
voltage t = 1 min VISO 5300 VRMS
Maximum transient isolation voltage VIOTM 8000 Vpeak
Maximum repetitive peak isolation voltage VIORM 1414 Vpeak
Insulation resistance Tamb = 25 °C, VDC = 500 V RIO 1012 Ω
Tamb = 100 °C, VDC = 500 V RIO 1011 Ω
Output safety power PSO 700 mW
Input safety current ISI 400 mA
Safety temperature TS150 °C
Clearance distance (DIP-8, widebody) 10 mm
Creepage distance (DIP-8, widebody) 10 mm
Insulation thickness DTI 0.4 mm
Input to output test voltage, method B VIORM x 1.875 = VPR, 100 % production test
with tM = 1 s, partial discharge < 5 pC VPR 2651 Vpeak
Input to output test voltage, method A VIORM x 1.6 = VPR, 100 % production test
with tM = 10 s, partial discharge < 5 pC VPR 2262 Vpeak
Environment (pollution degree in accordance to DIN VDE 0109) 2
isfh6135_02
VCM
VO
VO
10 V
5V
0V
VOL
90 %
10 % 90 %
10 %
trtf
t
t
t
A: IF=0mA
B: IF=16mA
1
2
3
4
8
7
6
5
B
VFF
IF
+VCM
VO
RL
5V
A
Pulse generator
ZO=50 Ω
tr,tf=8ns
VOW135, VOW136
www.vishay.com Vishay Semiconductors
Rev. 1.1, 26-Mar-15 5Document Number: 84156
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 4 - Output Current vs. Forward Voltage
Fig. 5 - Output Current vs. Output Voltage
Fig. 6 - Output Current vs. Temperature
Fig. 7 - Logic High Level Output Current vs. Temperature
Fig. 8 - Propagation Delay vs. Ambient Temperature - VOW135
Fig. 9 - Propagation Delay vs. Ambient Temperature - VOW136
1
10
100
1.0 1.2 1.4 1.6 1.8
IF- Forward Current (mA)
VF- Forward Voltage (V)
Tamb = 25 °C
Tamb = 100 °C
Tamb = 75 ° C
Tamb = -40 °C
Tamb = 0 °C
0
5
10
15
20
25
0 5 10 15 20 25
IO- Output Current (mA)
VO- Output Voltage (V)
IF= 20 mA
IF= 1 mA
IF= 15 mA
IF= 30 mA
VCC = 5 V
IF= 40 mA
IF= 5 mA
IF= 10 mA
0
1
2
3
4
5
6
7
8
-40 -20 0 20 40 60 80 100
IO - Output Current (mA)
Tamb - Ambient Temperature (°C)
VCC = 5 V
IF = 10 mA
IF = 5 mA
IF = 1 mA
VO
= 0.4 V
IF = 20 mA
0.1
1
10
100
1000
-40-200 20406080100
IOH - High Level Output Current (nA)
Tamb - Ambient Temperature (°C)
IF= 0 mA
Vo= 15 V
Vo= 5.5 V
0
200
400
600
800
1000
1200
-40 -20 0 20 40 60 80 100
tp - Propagation Delay Time (ns)
Tamb - Ambient Temperature (°C)
RL = 4.1 kΩ
IF = 16 mA
VCC = 5 V
tPLH
tPHL
0
200
400
600
800
1000
1200
-40 -20 0 20 40 60 80 100
tp - Propagation Delay Time (ns)
Tamb - Ambient Temperature (°C)
RL = 1.9 kΩ
IF = 16 mA
VCC = 5 V
tPLH
tPHL
VOW135, VOW136
www.vishay.com Vishay Semiconductors
Rev. 1.1, 26-Mar-15 6Document Number: 84156
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 10 - Small Signal Current Transfer Ratio vs. Forward Current
Fig. 11 - Normalized Saturated CTR vs. Forward Current
Fig. 12 - Normalized Non-Saturated CTR vs. Forward Current
Fig. 13 - Normalized Saturated CTR vs. Ambient Temperature
Fig. 14 - Normalized Non-Saturated CTR vs. Ambient Temperature
0
0.1
0.2
0.3
0.4
0.5
0.6
0 5 10 15 20 25
ΔIF/ΔIC - Small Signal CTR
IF - Forward Current (mA)
RL = 100 Ω
VCC = 5 V
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0.1 1 10 100
Normalized Saturated CTR
IF - Forward Current (mA)
VO = 0.4 V
Tamb = 25 °C
Normalized to CTR value:
IF = 16 mA, VCC = 5 V, Tamb = 25 °C
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0.1 1 10 100
Normalized Non-Saturated CTR
IF - Forward Current (mA)
Tamb = 25 °C
VO = 5 V
Normalized to CTR value:
IF = 16 mA, VCC = 5 V, Tamb = 25 °C
0.6
0.7
0.8
0.9
1
1.1
-40-200 20406080100
Normalized Saturated CTR
Tamb - Ambient Temperature (°C)
VO = 0.4 V
Normalized to CTR value:
IF = 16 mA, VCC = 5 V, Tamb = 25 °C
0.6
0.7
0.8
0.9
1.0
1.1
-40 -20 0 20 40 60 80 100
Normalized Non-Saturated CTR
Tamb - Ambient Temperature (°C)
VO = 5 V
Normalized to CTR value:
IF = 16 mA, VCC = 5 V, Tamb = 25 °C
VOW135, VOW136
www.vishay.com Vishay Semiconductors
Rev. 1.1, 26-Mar-15 7Document Number: 84156
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE DIMENSIONS in millimeters
DIP-8, widebody
SMD-8, widebody (option 7)
PACKAGE MARKING (example of VOW136-X017T)
Note
Tape and reel suffix (T) is not part of the package marking.
4
Lead coplanarity
max. 0.10
14.00
2.00
Recommended footprint
11.30 max.
1.75 ± 0.152.54 nom.
10.90 ± 0.15
1.32 ± 0.05
12.30 ± 0.30
9.00 ± 0.15
1 ± 0.15
Min. 10.16
11.00 max.
3.90 ± 0.10
0.75 ± 0.25
2.54
1.78
0.25 ± 0.05
R0.25
123
5876
VOW136
V YWW 68
VOW135, VOW136
www.vishay.com Vishay Semiconductors
Rev. 1.1, 26-Mar-15 8Document Number: 84156
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKING INFORMATION (tape and reel)
Fig. 15 - Tape and Reel Shipping Medium
Fig. 16 - Tape and Reel Packing Option 7 (750 parts per reel)
Top cover tape
Embossment
Embossed carrier
17998
VOW135, VOW136
www.vishay.com Vishay Semiconductors
Rev. 1.1, 26-Mar-15 9Document Number: 84156
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKING INFORMATION (tubes)
SOLDER PROFILES
Fig. 17 - Lead (Pb)-free Reflow Solder Profile According to
J-STD-020 for SMD Devices
HANDLING AND STORAGE CONDITIONS
ESD level: HBM class 2
Floor life: unlimited
Conditions: Tamb < 30 °C, RH < 85 %
Moisture sensitivity level 1, according to J-STD-020
DEVICE PER TUBE
TYPE UNITS/TUBE TUBE/BOX UNITS/BOX
DIP-8, widebody 40 30 1200
0
50
100
150
200
250
300
0 50 100 150 200 250 300
Time (s)
Temperature (°C)
240 °C 245 °C
max. 260 °C
max. 120 s max. 100 s
217 °C
max. 30 s
max. ramp up 3 °C/s
max. ramp down 6 °C/s
19841
255 °C
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
VOW136-X017T VOW135-X017T VOW136-X001 VOW135-X001