Fully automated production tech-
niques, ensure this extensive range
offers you consistently high
standards of performance and reli-
ability. Tyco can meet all your
demands with its range of 4 to 13
resistor elements in common
format and 3 to 7 resistor elements
in isolated types. The substrate and
lead frame provide exceptional
strength and the resistors are
protected from humidity and
thermal shock by a hardwearing,
solvent proof black coating. Tyco
Eloectronics will also manufacture
custom design networks for
your special requirements. Please
contact our Sales Action Desk for
details.
Key Features
I2% & 5% Tolerances
ILow Price Keeps
Production Costs
Down
ISolvent Proof Coating
IVery Wide Range
ILow Profile
(5.08mm Max.)
IVery Strong
Construction
IHigh Insulation
Resistance
Characteristics -
Electrical
Characteristics -
Environmental
Resistance Range: 10R to 1M0 (E24 Values)
Resistance Tolerances: 5%, 2%
Maximum Operating Voltage: 100 Volts
Power Rating @ 70°C (Series): 0.125 Watts
(Parallel): 0.200 Watts
Test Method
Spec. JIS - C - 5202 MIL - R - 83401
Operating Temperature: -55° ~ +125°C
Resistance Temp. Coefficient: ±200ppm/°C 5.2 (B) 6.4.8
Short Time Overload: ±1.0% 5.5 4.6.10
Temperature Cycle: ±0.5% 7.4 ( -55°C ~ 125°C) 4.6.3
Load Life: ±2.0% 7.10 (1000 hr.) 4.6.18(70°C 1000hr)
Moisture-Proof Load Life: ±2.0% 7.9 (1000 hr.)
Moisture Resistance: ±1.0% 4.6.15
High Temperature Exposure: ±1.0% 4.6.19
Solderability: 95% coverage min. 6.5 (235°C/2s) 4.6.6
Solder Pot: ±0.5% 6.4 (260°C/10s) 4.6.14
Terminal Strength: ±0.5% 6.1 (1) 1kg/10s) 4.6.11
Circuit Configuration
Please Note: Common Terminal Devices (configuration E) are marked A on the body of the resistor.
Isolated Terminal Devices (configuration M) are marked either B or C on the body of the resistor.
SIL Resistor Networks
(Standard Packages)
M. Isolated Terminal
E. Common Terminal
Power Derating Curve
-55 -30 0 20 40 60 70 80 100 120
125
130
100
80
60
40
20
0
% Power
Temperature (°C)
Literature No. 1773284
Issued: 12-09
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com
General Purpose Resistor Networks
SIL Resistor Networks (Standard Packages)
Dimensions
2.54 x n
0.50 ±0.1
2.54 ±0.2 1.20 ±0.1
3.5 ±0.5
0.25 ±0.05
5.08 Max
2.50 Max
n = number of pins
How to Order
SIL 08 E 472 J
Common Part
04 - 4 Pins
05 - 5 Pins
06 - 6 Pins
07 - 7 Pins
08 - 8 Pins
09 - 9 Pins
10 - 10 Pins
11 - 11 Pins
12 - 12 Pins
13 - 13 Pins
14 - 14 Pins
No. of Pins
E - Common Terminals
M - Isolated Terminals
Circuit Config.
Resistance Value
SIL
The first two digits
are significant fig-
ures of resistance
value and the third
denotes the number
of zeros following.
e.g. 220R: 221
4K7: 472
51K: 513
470K: 474
Tolerance
J - 5%
G - 2%
Literature No. 1773284
Issued: 12-09
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com
General Purpose Resistor Networks
SIL Resistor Networks (Standard Packages)
