Notes:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
(3) Thermal resistance from junction to ambient at 0.375 (9.5mm) lead length, P.C.B. mounted
Symbols RL
101FG
RL
102FG
RL
103FG
RL
104FG
RL
105FG
RL
106FG
RL
107FG Units
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55 I(AV) 1.0 Amp
Peak forward surge current
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method)
IFSM 30.0 Amps
Maximum forward voltage at 1.0A VF1.30 Volts
Maximum DC reverse current TA=25
at rated DC blocking voltage TA=100 IR
5.0
100.0 A
Maximum reverse recovery time (Note 1) Trr 150 250 500 nS
Typical junction capacitance (Note 2) CJ10.0 F
Typical thermal resistance (Note 3) R JA 67.0 /W
Operating and storage temperature range TJ, TSTG -55 to +150
Features
Mechanical Data
RL101FG THRU RL107FG
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0 Ampere
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0 utilizing
Flame retardant epoxy molding compound
Glass passivated junction
1.0 ampere operation at TA=55 with no
thermal runaway
Fast switching for high efficiency
Case: Molded plastic, A-405
Terminals: Axial leads, solderable
per MIL-STD-202, method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.008 ounce, 0.235 gram
Maximum Ratings and Electrical Characteristics
1
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
DIMENSIONS
DIM
inches mm
Note
Min. Max. Min. Max.
A 0.165 0.205 4.2 5.2
B 0.079 0.106 2.0 2.7
C 0.020 0.024 0.5 0.6
D 1.000 - 25.40 -
RATINGS AND CHARACTERISTIC CURVES
2
