New tion Genera PLC FT1A Series - Touch Key Features * 3.8" (3.7" monochrome) HMI with embedded 12 I/O PLC * Available in Monochrome or 65K TFT color * 740 cd/m2 monochrome, 400 cd/m2 color * 8 inputs, 4 relay outputs * Embedded 2pt 0-10V analog input * 10 Amp Relay contacts * Embedded Ethernet port * USB Mini-B Programming Port * USB Type A port for data logging and recipe functions * RS232C/RS485 interface * IP66f (water and oiltight) General Specifications Part Numbers FT1A-C12RA-W FT1A-C12RA-B Light Gray Dark Gray FT1A-C12RA-S FT1A-M12RA-W Silver Light Gray FT1A-M12RA-B FT1A-M12RA-S Appearance LCD Screen Bezel Color TFT Color STN Monochrome Operating Temperature Dark Gray Silver 0 to +50C Storage Temperature -20 to +60C (no freezing) Rated Power Voltage 24V DC Allowable Voltage Range 20.4 to 28.8V DC (including ripple) Maximum Power Consumption 9.2W maximum (when USB2 is not used: 5.8W max.) Weight Approx. 300g Display Specifications Part Number FT1A-C12RA-* FT1A-M12RA-* Display Element TFT color LCD STN monochrome LCD Colors/Shades 65,536 colors Monochrome 8 shades Effective Display Area 88.92 W x 37.05 H mm Display Resolution View Angle Contrast Adjustment Backlight Left/right 40, top 20, bottom 60 Left/right/top/bottom: 45 Not possible 32 levels LED Backlight Life Brightness Note 2 Brightness Adjustment Backlight Control Backlight Replacement Graphics Window Display 87.59 W x 35.49 H mm 240 W x 100 H pixels LED (white, red, pink) 50,000 hours Note 1 400 cd/m2 740 cd/m2 32 levels Auto off function Not possible Line, polyline, polygon, rectangle, circle, ellipse, arc, pie, equilateral polygons (3, 4, 5, 6, 8), fill, picture 3 popup screens + 1 system screen 1. The backlight life refers to the time until the brightness reduces by half after use at 25C. 2. Brightness of LCD only (monochrome LCD: when lit white). Specifications con't on next page Function Specifications Part Numbers FT1A-C12RA-*, M12RA-* Program Capacity Input Program size: 48 KB, Configuration memory capacity: 5 MB Points Output Points User Program Storage 128KB Buzzer Output Single tone (tone length is adjustable) Backup Duration Charging Time Battery Life Replaceability Approx. 30 days (typical) at 25C after backup battery fully charge Lithium Approx. 15 hours for charging from 0% to 90% of full charge 5 years Not possible Clock accuracy: 30 sec/month (typical) at 25C Clock Function Note 2 Control System Processing Time Backup data: Internal relay, shift register, counter current value, data register Note 1, clock data (year, month, and day) Backup Data Battery Instruction Words 4 Flash ROM (100,000 times) RAM Backup Function 8 Stored program system Basic Instructions 42 Advanced Instructions 97 Basic Instruction 1850s/1000 steps END Processing 5 msec minimum Internal Relay 1024 Shift Register 128 Data Register 2000 Counter (adding, reversible) 200 Timer (1-sec, 100ms,10ms, 1ms) 200 Input Filter Catch Input/Interrupt Input Without filter, 3 to 15ms (selectable in increments of 1ms) Input Points 4 Keep data, Power failure, Clock error, Watchdog timer, Timer/counter preset value change error, User program syntax, User program execution, System error, Memory cartridge transfer error Self-diagnostic Function Points High-speed Counter Analog Voltage Input Maximum Counter Frequency Counting Range 0 to 4,294,967,295 (32 bits) Operation Mode Rotary encoder mode and adding counter mode Points (Terminal No.) 2 Input voltage Range 0 to 10V DC Digital Resolution USB Port Single/two-phase selectable: 1 (5 kHz, multiple 2/4, single-phase cannot be used) Single-phase: 4 (x 10 kHz) USB Standard Connector Ethernet Port 10-bit( 0 to 1000) USB 2.0 Mini-B type 1 1. Among data registers D0 to D1999, only D0 to D999 are backed up. 2. Set the calendar/clock using the clock function in WindLDR. Dimensions on next page Dimensions (mm) When using mounting bracket (HG9Z-4K2PN04) 77.0 Y 65.5 Panel thickness: 1.0 to 5.0 (Note) Note: Waterproof characteristic may not be obtained depending on the panel material and size. LCD Active Area 4.0 X 116.0 53.7 (57.7) 104.5 LCD Type X Y TFT 88.92 37.05 STN 87.59 35.49 When using rear mount adapter (FT9Z-1A01) 125.0 70.0 4-M3 4-R tapped hole 77.0 90.0 4.25 4.0 4-o 97.0 98.0 105.0 116.0 100.0 4.0 11.8 57.7 Mounting Hole Layout 100 (90) 144 (160) IDEC Corporation * 1175 Elko Drive * Sunnyvale, CA 94089 * 800-262-IDEC (4332) * Fax: 408-745-5258 * www.IDEC.com/usa (c)2013 IDEC Corporation. All Rights Reserved. 03/13 PDF only