DC/DC CONVERTERS 10A Non-isolated DC/DC Converters 1
2 YEAR WARRANTY
SIL10 Series
Single output
•Current rating of 10A
•Outputs of between 0.8V to 3.3V - fixed and flexible versions
•Works from either a 5V or 3.3V system bus voltage
•High efficiency - up to 96% achievable on 3.3 Vout
•POL converter that saves board space - vertical or horizontal
versions
•Industry standard footprint
•Ultra wide output voltage version also available
The SIL10 series are non-isolated DC/DC converters packaged in a single-in-line footprint giving
designers a cost effective solution for conversion from either a 5V or 3.3V input to output
voltages of 0.8V to 3.3V. The SIL10 offers both fixed outputs and wide output trim range which
allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion
by the SIL10 series from existing 5V or 3.3V system voltages eliminates the need for redesign of
existing power architectures when voltage requirements change. The SIL10 is designed for
applications that include distributed power, workstations, optical network and wireless
applications. Implemented using state of the art surface mount technology and automated
manufacturing techniques, the SIL10 offers compact size and efficiencies of up to 96%.
NEW Product
All specifications are typical at nominal input, full load at 25°C unless otherwise stated SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability Fixed output versions ±10%
5Vin with wide trim 3.6V to 0.8V
3.3Vin with wide trim 2.75V to 0.8V
Setpoint accuracy ±2.7%
Line regulation ±1.0%
Load regulation ±1.0%
Minimum load 0A
Overshoot/undershoot None
Ripple and noise 50mV pk-pk
0 to 20MHz BW 25mV rms max.
Temperature co-efficient ±0.01%/ºC
Transient response 50mV max. deviation
50µs recovery to
within ±1.0%
Remote sense 10% Vo compensation
INPUT SPECIFICATIONS
Input voltage range 3.0 to 5.5VDC
Input current No load 70mA
Input current (max.) 8A max. @ Io max.
and Vout = 3.3V
Input current ripple 65mA rms
Remote ON/OFF (See Note 1)
Start-up time 20ms
File Name: SIL10.PDF Rev: 11 Feb 2003
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E174104
UL60950 file No. E174104
TÜV TÜV Product Service (EN60950) Certificate No. B02 12 38572 035
CB report and certificate to IEC60950
EMC CHARACTERISTICS
Electrostatic discharge EN61000-4-2, IEC801-2
Conducted immunity EN61000-4-6
Radiated immunity EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency See table
Insulation voltage Non-isolated
Switching frequency Fixed 300kHz typ.
Approvals and EN60950
standards UL/cUL60950
Material flammability UL94V-0
Dimensions (LxWxH) 50.8 x 7.8 x 12.7mm
(Vertical version) 2.0 x 0.31 x 0.5 inches
Pin length Vertical 0.135 ±0.02 in (3.43 ±0.5mm)
Weight 5g (0.18oz)
MTBF Telecordia 332 7,042,000
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, -40ºC to +100ºC
(See Note 2)
Non-operating -40ºC to +125ºC
PROTECTION
Short-circuit protection Continuous
Thermal protection Automatic recovery
Output Voltage Adjustment of the SIL10-05Wxxx Series
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
Notes
1Referenced to ground for shutdown. If pin 6 is high unit will shutdown.
If pin 6 is open unit will operate as normal. Converter is guaranteed OFF
when control pin is greater than 1.2V.
2Full de-rating curves available in both the Long Form Data Sheet and
Application Note 134.
3For certain applications that use low ESR capacitors on the output of the
convertor and to insure maximum converter stability, please add the
suffix ‘-02’ to the model, e.g. SIL10E-05S2V5-V02.
CAUTION: High internal temperatures. Ensure that unit is not user
accessible.
SIL10 Series
Single output
DC/DC CONVERTERS 10A Non-isolated DC/DC Converters 2
NEW Product
File Name: SIL10.PDF Rev: 11 Feb 2003
SIL10-05S3V3-V
Part Number System with Options
Product Family
SIL = Single In Line
Rated Output Current
10A = 10Amps
Mounting Option
V = Vertical Mount
H= Horizontal Mount
Number of Outputs
S = Single
W = Wide
Input Voltage
05 = 3.0V - 5.5V
12 = 10V - 14V
Output Voltage
2.5V, 3.3V etc
The ultra-wide output voltage trim range offers major advantages to users who
select the SIL10-05W3V3. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.8V to 3.6V. When the SIL10-05W3V3 converter leaves
the factory the output has been adjusted to the default voltage of 3.3V
•When Vin ≥ 4.5V, then Vout can be adjusted from 0.8V to 3.6V
• When Vin < 4.5V, then Vout can be adjusted from 0.8V to 2.75V
Output Voltage Adjustment of the SIL10-05W3V3 Series
OUTPUT INPUT OUTPUT OUTPUT OUTPUT EFFICIENCY REGULATION MODEL
POWER VOLTAGE VOLTAGE CURRENT CURRENT (TYP.) LINE LOAD NUMBER
(MAX.) (MIN.) (MAX.)
8.8W 3.0V - 5.5V 0.8V 0A 10A 83% ±1% ±1.5% SIL10-05S0V8-V
11W 3.0V - 5.5V 1.0V 0A 10A 86% ±1% ±1.5% SIL10-05S1V0-V
13.2W 3.0V - 5.5V 1.2V 0A 10A 88% ±1% ±1% SIL10-05S1V2-V(3)
16.5W 3.0V - 5.5V 1.5V 0A 10A 90% ±1% ±1% SIL10-05S1V5-V
19.8W 3.0V - 5.5V 1.8V 0A 10A 92% ±1% ±1% SIL10-05S1V8-V
22W 3.0V - 5.5V 2.0V 0A 10A 93% ±1% ±1% SIL10-05S2V0-V
27.5W 3.0V - 5.5V 2.5V 0A 10A 94% ±1% ±1% SIL10-05S2V5-V(3)
36.3W 4.5V - 5.5V 3.3V 0A 10A 95% ±1% ±1% SIL10-05S3V3-V
36.3W 4.5V - 5.5V 3.3V 0A 10A 95% ±1% ±1% SIL10-05W3V3-V
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
SIL10 Series
Single output
DC/DC CONVERTERS 10A Non-isolated DC/DC Converters 3
NEW Product
0.170 (4.32)
0.316 ±0.008
(8.03 ±0.20)
PCB
SIDE VIEW
PIN VIEW
2.000 ±0.020
(50.80 ±0.50)
0.100 (2.54)
1.900 (48.26) 0.050 (1.27)
0.500 (12.70)
J1
J2
15362 1543 2
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Place ±0.15
3 Place ±0.006
Figure 1: Mechanical Drawing - Horizontal Mount Version
Figure 2: Mechanical Drawing - Vertical Mount Version
1.900 (48.26)
0.050 (1.27)
0.100 (2.54)
2.000 ±0.020
(50.80 ±0.50)
FRONT VIEW
0.500 (12.70)
0.635 (16.13)
0.135 (3.43)
PCB
0.168 (4.26)
SIDE VIEW
0.307 ±0.008
(7.80 ±0.20)
J1 J2
15432 15632
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Place ±0.15
3 Place ±0.006
Data Sheet © Artesyn Technologies
®
2003
The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com
File Name: SIL10.PDF Rev: 11 Feb 2003
J1 PIN CONNECTIONS
PIN NUMBER FUNCTION
1+Vout
2+Vout
3Remote Sense (+)
4+Vout
5Ground
J2 PIN CONNECTIONS
PIN NUMBER FUNCTION
1Ground
2+Vin
3+Vin
4No Pin
5Trim
6Remote ON/OFF
