CPH5506 Ordering number : EN6590A SANYO Semiconductors DATA SHEET CPH5506 PNP/NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Applications * Relay drivers, Lamp drivers, Motor drivers Features * * * Composite type with a PNP transistor and an NPN transistor contained in one package, facilitating high-density mounting The CPH5506 consists of two chips encapsulated in a package which are equivalent to the CPH3115 and the CPH3215, respectively Ultrasmall package facilitate miniaturization in end products. (0.9mm mounting height) Specifications ( ): PNP Absolute Maximum Ratings at Ta=25C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Total Power Dissipation Ratings Unit (--30)40 V (--)30 V VEBO IC (--)5 V (--)1.5 A ICP IB PC Base Current Conditions VCBO VCEO (--)5 Junction Temperature PT Tj Storage Temperature Tstg mA Mounted on a ceramic board (600mm2x0.8mm) 0.9 W Mounted on a ceramic board (600mm2x0.8mm) 1.2 W 150 C --55 to +150 C Product & Package Information unit : mm (typ) 7017A-009 * Package : CPH5 * JEITA, JEDEC : SC-74A, SOT-25 * Minimum Packing Quantity : 3,000 pcs./reel 5 4 CPH5506-TL-E 0.15 3 Packing Type : TL Marking LOT No. EF 0.05 1.6 2.8 0.2 0.6 Package Dimensions 2.9 A (--)300 0.9 0.2 0.6 TL 1 2 0.95 0.4 1 : Collector (NPN TR) 2 : Collector (PNP TR) 3 : Base (PNP TR) 4 : Emitter Common 5 : Base (NPN TR) Electrical Connection B1 EC B2 SANYO : CPH5 C1 C2 http://semicon.sanyo.com/en/network 62012 TKIM/71400 TSIM TA-2880 No.6590-1/8 CPH5506 Electrical Characteristics at Ta=25C Parameter Symbol Collector Cutoff Current Conditions ICBO IEBO VCB=(--)30V, IE=0A VEB=(--)4V, IC=0A Gain-Bandwidth Product hFE fT VCE=(--)2V, IC=(--)100mA VCE=(--)10V, IC=(--)300mA Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat) VBE(sat) VCB=(--)10V, f=1MHz IC=(--)750mA, IB=(--)15mA Emitter Cutoff Current DC Current Gain Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage IC=(--)750mA, IB=(--)15mA IC=(--)10A, IE=0A IC=(--)1mA, RBE= V(BR)CBO V(BR)CEO Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time V(BR)EBO ton IE=(--)10A, IC=0A tstg tf See specified Test Circuit. Ratings min typ max 200 Unit (--)0.1 A (--)0.1 A 560 (450)500 MHz (9)8 pF (--250)150 (--375)225 (--)0.85 (--)1.2 (--30)40 mV V V (--)30 V (--)5 V 35 ns (115)205 ns 30 ns Switching Time Test Circuit IB1 PW=20s D.C. 1% IB2 INPUT VR OUTPUT RB 50 RL 16 + 100F VBE= --5V + 470F 20IB1= --20IB2=IC=750mA VCC=12V For PNP, the polarity is reversed. Ordering Information Device CPH5506-TL-E Package Shipping memo CPH5 3,000pcs./reel Pb Free No.6590-2/8 CPH5506 [PNP] --1.4 --20mA --1.2 --8mA --1.0 --10mA --6mA --4mA --0.8 --0.6 --2mA --0.4 --0.2 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V IC -- VBE --1.6 1.2 10mA 8mA 6mA 1.0 4mA 0.8 2mA 0.6 0.4 IB=0mA 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Collector-to-Emitter Voltage, VCE -- V IT01673 [PNP] IC -- VBE 1.6 1.0 IT01674 [NPN] VCE=2V --1.0 --0.8 --0.6 --0.4 --0.2 1.2 1.0 0.8 0.6 C 25C --25C --1.2 Ta=75 Collector Current, IC -- A 1.4 Ta=7 5C 25C --25C Collector Current, IC -- A 1.4 0 --1.4 0.4 0.2 0 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 Base-to-Emitter Voltage, VBE -- V IT01675 hFE -- IC [PNP] 1000 0 DC Current Gain, hFE 25C --25C 100 7 5 3 0.8 1.0 hFE -- IC [NPN] VCE=2V 5 Ta=75C 3 25C --25C 2 1.2 IT01676 100 7 5 3 2 2 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A f T -- IC 3 2 10 0.01 3 2 3 5 7 0.1 VCE= --10V 5 3 2 100 7 5 5 7 1.0 2 3 IT01678 [NPN] VCE=10V 2 Gain Bandwidth Product, f T -- MHz 7 3 f T -- IC 3 1000 2 Collector Current, IC -- A IT01677 [PNP] 2 1000 7 5 3 2 100 7 5 3 3 2 --0.01 0.6 1000 Ta=75C 10 --0.01 0.4 7 3 2 0.2 Base-to-Emitter Voltage, VBE -- V VCE= --2V 7 DC Current Gain, hFE 20mA 1.6 --0.9 --1.0 VCE= --2V Gain Bandwidth Product, f T -- MHz A 0.2 IB=0mA 0 5 30m 40mA [NPN] A Collector Current, IC -- A --1.6 1.8 Collector Current, IC -- A --50mA --40mA --30mA --1.8 IC -- VCE 2.0 50m IC -- VCE --2.0 2 3 5 7 --0.1 2 3 5 Collector Current, IC -- A 7 --1.0 2 IT01679 2 0.01 2 3 5 7 0.1 2 3 5 Collector Current, IC -- A 7 2 1.0 IT01680 No.6590-3/8 CPH5506 Cob -- VCB 100 [PNP] Cob -- VCB 100 [NPN] f=1MHz 7 5 5 Output Capacitance, Cob -- pF Output Capacitance, Cob -- pF f=1MHz 7 3 2 10 7 5 3 2 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 VCE(sat) -- IC [PNP] 2 --0.1 7 5 C 75 Ta= C --25 3 2 2 3 5 25 7 --0.1 C 2 3 5 7 --1.0 --0.1 C 25 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V 3 2 Ta= --25C 7 75C 25C 3 2 --0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 5 3 C 75 Ta= C --25 2 2 3 5 7 --1.0 Collector Current, IC -- A 2 C 25 7 0.1 2 3 5 7 1.0 3 IT01687 2 3 IT01684 VCE(sat) -- IC [NPN] IC / IB=50 5 3 2 0.1 7 5 C 75 3 25 5C 2 Ta= -- 2 2 3 5 7 0.1 C 2 3 5 7 1.0 2 3 IT01686 VBE(sat) -- IC [NPN] IC / IB=50 7 5 5 0.1 10 IC / IB=50 7 [NPN] Collector Current, IC -- A [PNP] 5 2 0.01 0.01 3 3 IT01682 3 IT01685 VBE(sat) -- IC --10 2 2 Collector Current, IC -- A Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 2 2 5 7 10 7 3 C 3 IC / IB=20 1.0 5 Ta= --25 2 VCE(sat) -- IC [PNP] 7 5 7 1.0 5 0.01 0.01 3 --1.0 75C 5 1.0 IC / IB=50 7 3 IT01683 VCE(sat) -- IC 2 2 2 7 3 --1.0 7 5 Collector-to-Base Voltage, VCB -- V IC / IB=20 5 --0.01 --0.01 10 2 0.1 5 IT01681 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V 3 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 2 Collector-to-Base Voltage, VCB -- V 7 3 2 3 --1.0 --0.01 --0.01 3 5 3 2 1.0 Ta= --25C 7 75C 5 25C 3 2 0.1 0.01 2 3 5 7 0.1 2 3 5 Collector Current, IC -- A 7 1.0 2 3 IT01688 No.6590-4/8 CPH5506 ASO 1.4 ICP=5A Collector Current, IC -- A IC=1.5A DC 3 1 op 00m er s ati on ms 2 Ta=25C Single pulse Mounted on a ceramic board(600mm2x0.8mm) For PNP, minus sign is omitted 3 2 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 2 1.0 0.9 To t 0.8 al 1u nit 0.6 Di ss ip ati on 0.4 0.2 0 3 5 7 100 IT02363 Collector-to-Emitter Voltage, VCE -- V PC(TR2) -- PC(TR1) [PNP / NPN] 1.0 Collector Dissipation, PC(TR2) -- W 10 1.0 7 5 1.2 s 0 s 10 0 50 s 3 0.1 7 5 [PNP / NPN] 10s 1m 2 PC -- Ta [PNP / NPN] Collector Dissipation, PC -- W 10 7 5 Mounted on a ceramic board(600mm2x0.8mm) 0 20 40 60 80 100 120 Ambient Temperature, Ta -- C 140 160 IT02364 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 Mounted on a ceramic board(600mm2x0.8mm) 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Collector Dissipation, PC(TR1) -- W 0.9 1.0 IT02365 No.6590-5/8 CPH5506 Embossed Taping Specification CPH5506-TL-E No.6590-6/8 CPH5506 Outline Drawing CPH5506-TL-E Land Pattern Example Mass (g) Unit 0.02 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No.6590-7/8 CPH5506 Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of June, 2012. Specifications and information herein are subject to change without notice. PS No.6590-8/8