GAL22V10/883
High Performance E2CMOS PLD
Generic Array Logic™
1
Devices have been discontinued.
228
NC
I/CLK
I
I
I
I
I
I
I
I
NC NC
NC
GND
I
I
I
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
Vcc
I/O/Q
I/O/Q I/O/Q
4
5
7
9
11
12 14 16 18
19
21
23
25
26
Features
HIGH PERFORMANCE E2CMOS® TECHNOLOGY
10 ns Maximum Propagation Delay
Fmax = 166 MHz
7ns Maximum from Clock Input to Data Output
TTL Compatible 12 mA Outputs
UltraMOS® Advanced CMOS Technology
ACTIVE PULL-UPS ON ALL PINS
COMPATIBLE WITH STANDARD 22V10 DEVICES
Fully Function/Fuse-Map/Parametric Compatible
with Bipolar and UVCMOS 22V10 Devices
50% REDUCTION IN POWER VERSUS BIPOLAR
•E
2 CELL TECHNOLOGY
Reconfigurable Logic
Reprogrammable Cells
100% Tested/100% Yields
High Speed Electrical Erasure (<100ms)
20 Year Data Retention
TEN OUTPUT LOGIC MACROCELLS
Maximum Flexibility for Complex Logic Designs
PRELOAD AND POWER-ON RESET OF REGISTERS
100% Functional Testability
APPLICATIONS INCLUDE:
DMA Control
State Machine Control
High Speed Graphics Processing
Standard Logic Speed Upgrade
ELECTRONIC SIGNATURE FOR IDENTIFICATION
GAL22V10
Top View
LCC
1
12 13
24
I/CLK
I
I
I
I
I
I
I
I
I
I
GND
Vcc
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I
6
18
GAL
22V10
CERDIP
Copyright © 2010 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A. May 2010
Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com
22v10mil_05
Description
The GAL22V10/883 is a high performance E2CMOS programmable
logic device processed in full compliance to MIL-STD-883. This
military grade device combines a high performance CMOS process
with Electrically Erasable (E2) floating gate technology to provide
the highest speed performance available of any military qualified
22V10 device. CMOS circuitry allows the GAL22V10 to consume
much less power when compared to bipolar 22V10 devices. E2
technology offers high speed (<100ms) erase times, providing the
ability to reprogram or reconfigure the device quickly and efficiently.
The generic architecture provides maximum design flexibility by
allowing the Output Logic Macrocell (OLMC) to be configured by
the user. The GAL22V10 is fully function/fuse map/parametric com-
patible with standard bipolar and CMOS 22V10 devices.
Unique test circuitry and reprogrammable cells allow complete AC,
DC, and functional testing during manufacture. As a result, Lat-
tice Semiconductor delivers 100% field programmability and func-
tionality of all GAL products. In addition, 100 erase/write cycles and
data retention in excess of 20 years are specified.
Functional Block Diagram
Pin Configuration
PROGRAMMABLE
AND-ARRAY
(132X44)
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I/O/Q
I
I/CLK
I
I
I
I
I
I
I
I
I
I
RESET
PRESET
8
10
12
14
16
16
14
12
10
8
OLMC
OLMC
OLMC
OLMC
OLMC
OLMC
OLMC
OLMC
OLMC
OLMC
Specifications GAL22V10D/883
2
Devices have been discontinued.
VIL Input Low Voltage Vss - 0.5 0.8 V
VIH Input High Voltage 2.0 Vcc+1 V
IIL1Input or I/O Low Leakage Current 0V VIN VIL (MAX.) -100 μA
IIH Input or I/O High Leakage Current 3.5V VIN VCC ——10μA
VOL Output Low Voltage IOL = MAX. Vin = VIL or VIH 0.5 V
VOH Output High Voltage IOH = MAX. Vin = VIL or VIH 2.4 V
IOL Low Level Output Current 12 mA
IOH High Level Output Current -2.0 mA
IOS2Output Short Circuit Current VCC = 5V VOUT = 0.5V TA = 25°C -50 -135 mA
ICC Operating Power VIL = 0.5V VIH = 3.0V L -10/-15/-20/-25/-30 90 150 mA
Supply Current ftoggle = 15MHz Outputs Open
1) The leakage current is due to the internal pull-up on all pins. See Input Buffer section for more information.
2) One output at a time for a maximum duration of one second. Vout = 0.5V was selected to avoid test problems caused by tester
ground degradation. Characterized but not 100% tested.
3) Typical values are at Vcc = 5V and TA = 25 °C.
Recommended Operating Conditions
Case Temperature (TC) ............................... -55 to 125°C
Supply Voltage (VCC)
with Respect to Ground ..................... +4.50 to +5.50V
DC Electrical Characteristics
Over Recommended Operating Conditions (Unless Otherwise Specified)
SYMBOL PARAMETER CONDITION MIN. TYP.3MAX. UNITS
Absolute Maximum Ratings(1)
Supply voltage VCC ....................................... -0.5 to +7V
Input voltage applied ........................... -2.5 to VCC +1.0V
Off-state output voltage applied .......... -2.5 to VCC +1.0V
Storage Temperature ................................. -65 to 150°C
Case Temperature with
Power Applied ......................................... -55 to 125°C
1. Stresses above those listed under the “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress only ratings and functional operation of the device
at these or at any other conditions above those indicated in
the operational sections of this specification is not implied
(while programming, follow the programming specifications).
Specifications GAL22V10D/883
3
Devices have been discontinued.
AC Switching Characteristics
Over Recommended Operating Conditions
tpd A Input or I/O to Combinatorial Output 10 15 ns
tco A Clock to Output Delay 7 8 ns
tcf2 Clock to Feedback Delay 7 8 ns
tsu Setup Time, Input or Feedback before Clock6—12ns
th Hold Time, Input or Feedback after Clock0—0—ns
A Maximum Clock Frequency with 76.9 50 MHz
External Feedback, 1/(tsu + tco)
fmax3A Maximum Clock Frequency with 76.9 50 MHz
Internal Feedback, 1/(tsu + tcf)
A Maximum Clock Frequency with 166 62.5 MHz
No Feedback
twh Clock Pulse Duration, High 3 8 ns
twl Clock Pulse Duration, Low 3 8 ns
ten B Input or I/O to Output Enabled 10 15 ns
tdis C Input or I/O to Output Disabled 12 15 ns
tar A Input or I/O to Asynchronous Reset of Register 12 20 ns
tarw Asynchronous Reset Pulse Duration 10 15 ns
tarr Asynchronous Reset to Clock Recovery Time 6 15 ns
tspr Synchronous Preset to Clock Recovery Time 10 12 ns
-15
MIN. MAX.
PARAMETER UNITS
TEST
COND.1DESCRIPTION
1) Refer to Switching Test Conditions section.
2) Calculated from fmax with internal feedback. Refer to fmax Description section.
3) Refer to fmax Description section.
SYMBOL PARAMETER MAXIMUM* UNITS TEST CONDITIONS
CIInput Capacitance 10 pF VCC = 5.0V, VI = 2.0V
CI/O I/O Capacitance 10 pF VCC = 5.0V, VI/O = 2.0V
*Characterized but not 100% tested.
Capacitance (TA = 25°C, f = 1.0 MHz)
-10
MIN. MAX.
Specifications GAL22V10/883
4
Devices have been discontinued.
AC Switching Characteristics
Over Recommended Operating Conditions
tpd A Input or I/O to Combinatorial Output 20 25 30 ns
tco A Clock to Output Delay 15 20 20 ns
tcf2 Clock to Feedback Delay 15 20 20 ns
tsu Setup Time, Input or Feedback before Clock17 20 25 ns
th Hold Time, Input or Feedback after Clock0—00ns
A Maximum Clock Frequency with 31.2 25 22 MHz
External Feedback, 1/(tsu + tco)
fmax3A Maximum Clock Frequency with 31.2 25 22 MHz
Internal Feedback, 1/(tsu + tcf)
A Maximum Clock Frequency with 33 33 25 MHz
No Feedback
twh Clock Pulse Duration, High 15 15 20 ns
twl Clock Pulse Duration, Low 15 15 20 ns
ten B Input or I/O to Output Enabled 20 25 25 ns
tdis C Input or I/O to Output Disabled 20 25 25 ns
tar A Input or I/O to Asynchronous Reset of Register 25 30 30 ns
tarw Asynchronous Reset Pulse Duration 20 25 30 ns
tarr Asynchronous Reset to Clock Recovery Time 20 25 30 ns
tspr Synchronous Preset to Clock Recovery Time 17 20 25 ns
-30
MIN. MAX.
PARAMETER UNITS
TEST
COND.1DESCRIPTION -25
MIN. MAX.
-20
MIN. MAX.
1) Refer to Switching Test Conditions section.
2) Calculated from fmax with internal feedback. Refer to fmax Description section.
3) Refer to fmax Description section.
SYMBOL PARAMETER MAXIMUM* UNITS TEST CONDITIONS
CIInput Capacitance 10 pF VCC = 5.0V, VI = 2.0V
CI/O I/O Capacitance 10 pF VCC = 5.0V, VI/O = 2.0V
*Characterized but not 100% tested.
Capacitance (TA = 25°C, f = 1/0 MHz)
Specifications GAL22V10D/883
Specifications GAL22V10/883
5
Devices have been discontinued.
Input or I/O to Output Enable/Disable
Registered Output
Combinatorial Output
VALID INPUT
INPUT or
I/O FEEDBACK
t
pd
COMBINATORIAL
OUTPUT
INPUT or
I/O FEEDBACK
REGISTERED
OUTPUT
CLK
VALID INPUT
t
su
t
co
t
h
(external fdbk)
1/
f
max
t
en
t
dis
INPUT or
I/O FEEDBACK
OUTPUT
Clock Width
fmax with Feedback
CLK
REGISTERED
FEEDBACK
t
cf
t
su
1/
f
max (internal fdbk)
REGISTERED
OUTPUT
CLK
t
arw
t
ar
t
arr
INPUT or
I/O FEEDBACK
DRIVING AR
CLK
(
w/o fdbk
)
t
wh
1/
f
max
t
wl
Asynchronous ResetSynchronous Preset
REGISTERED
OUTPUT
CLK
INPUT or
I/O FEEDBACK
DRIVING SP
t
su
t
h
t
co
t
spr
Switching Waveforms
Specifications GAL22V10/883
6
Devices have been discontinued.
fmax with Internal Feedback 1/(tsu+tcf)
Note: tcf is a calculated value, derived by sub-
tracting tsu from the period of fmax w/internal
feedback (tcf = 1/fmax - tsu). The value of tcf is
used primarily when calculating the delay from
clocking a register to a combinatorial output
(through registered feedback), as shown above.
For example, the timing from clock to a combi-
natorial output is equal to tcf + tpd.
REGISTER
LOGIC
ARRAY
t
co
t
su
CLK
Note: fmax with external feedback is cal-
culated from measured tsu and tco.
fmax with External Feedback 1/(tsu+tco)
REGISTER
LOGIC
ARRAY
CLK
tsu + th
fmax with No Feedback
Note: fmax with no feedback may be less
than 1/(twh + twl). This is to allow for a
clock duty cycle of other than 50%.
Input Pulse Levels GND to 3.0V
Input Rise and Fall Times 3ns 10% – 90%
Input Timing Reference Levels 1.5V
Output Timing Reference Levels 1.5V
Output Load See Figure
3-state levels are measured 0.5V from steady-state active
level.
Output Load Conditions (see figure)
Test Condition R1R2CL
A 390Ω750Ω50pF
B Active High 750Ω50pF
Active Low 390Ω750Ω50pF
C Active High 750Ω5pF
Active Low 390Ω750Ω5pF
TEST POINT
C *
L
FROM OUTPUT (O/Q) 
UNDER TEST
+5V
*C
L
INCLUDES TEST FIXTURE AND PROBE CAPACITANCE
R
2
R
1
CLK
REGISTER
LOGIC
ARRAY
t
cf
t
pd
fmax Descriptions
Switching Test Conditions
Specifications GAL22V10/883
7
Devices have been discontinued.
#gniredrO
dpT
)sn()sn( )sn( )sn()sn(
usT
)sn()sn( )sn( )sn()sn(
ocT
)sn()sn( )sn( )sn()sn(
ccI
)Am()Am( )Am( )Am()Am( egakcaP38
8-DTS-LIM#DMS
0167 051PIDRECniP-42388/DL01-D01V22LAG
1
AL6014898-2695
051CCLniP-82388/RL01-D01V22LAG
1
A36014898-2695
51218 051PIDRECniP-42388/DL51-D01V22LAG
1
AL3014898-2695
051CCLniP-82388/RL51-D01V22LAG
1
A33014898-2695
027151051PIDRECniP-42388/DL02-D01V22LAG
1
AL2014898-2695
051CCLniP-82388/RL02-D01V22LAG
1
A32014898-2695
520202051PIDRECniP-42388/DL52-D01V22LAG
1
AL4014898-2695
035202051PIDRECniP-42388/DL03-D01V22LAG
1
AL1014898-2695
Note: Lattice Semiconductor recognizes the trend in military device procurement towards
using SMD compliant devices, as such, ordering by this number is recommended.
1. Discontinued per PCN #05A-10.
GAL22V10 Ordering Information (MIL-STD-883 and SMD)
Part Number Description
MIL Process /883 = 883 Process
Package
PowerL = Low Power
Speed (ns)
XXXXXXXX XX X X X
Device Name
_
D = CERDIP
R = LCC
GAL22V10D