Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 1 of 13 ASC_Middle & High Voltage_003U May. 2012
*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS
Middle & High Voltage Series (200V to 3kV)
0603 to 1812 Sizes
NP0, X7R & Y5V Dielectrics
R
o
HS compliance
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 2 of 13 ASC_Middle & High Voltage_003U May. 2012
1. INTRODUCTION
WTC middle and high voltage series MLCC is designed by a special internal electrode pattern, which can reduce
voltage concentrations by distributing voltage gradients throughout the entire capacitor. This special design also affords
increased capacitance values in a given case size and voltage rating.
Chips size 1206 and larger to use on reflow soldering process only. Capacitors with X7R dielectrics are not
intended for AC line filtering applications. Capacitors may require protective surface coating to prevent external arcing.
4. HOW TO ORDER
1808 N 100 J 202 C T
Size
Inch (mm)
0603 (1608)
0805 (2012)
1206 (3216)
1210 (3225)
1808 (4520)
1812 (4532)
Dielectric
N=NP0
(C0G)
B=X7R
F=Y5V
Capacitance
Two significant
digits followed by
no. of zeros. And R
is in place of
decimal point.
eg.:
0R5=0.5pF
1R0=1.0pF
100=10x10
0
=10pF
Tolerance
B=±0.1pF
C=±0.25pF
D=±0.5pF
F=±1%
G=±2%
J=±5%
K=±10%
M=±20%
Z=-20/+80%
Rated voltage
Two significant digits
followed by no. of zeros.
And R is in place of
decimal point.
201=200 VDC
251=250 VDC
501=500 VDC
631=630 VDC
102=1000 VDC
202=2000 VDC
302=3000 VDC
Termination
C
=Cu/Ni/Sn (for NP0,
X7R, Y5V dielectric)
Packaging
T=7” reeled
G=13” reeled
* Partial NP0 items are with Ag/Ni/Sn terminations, please ref to below product range of NP0 dielectric for detail.
2. FEATURES
a. High voltage in a given case size.
b. High stability and reliability.
3. APPLICATIONS
a. Snubbers in high frequency power converters.
b. High voltage coupling/DC blocking.
c. DC-DC converters.
d. Back-lighting inverters
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 3 of 13 ASC_Middle & High Voltage_003U May. 2012
5. EXTERNAL DIMENSIONS
6. GENERAL ELECTRICAL DATA
Dielectric NP0 X7R Y5V
Size 0603, 0805, 1206, 1210, 1808, 1812 0805, 1206, 1210, 1812
Capacitance* 0.5pF to 6800pF 100pF to 1.0µF 0.01µnF to 0.68µF
Capacitance tolerance***
Cap≤5pF: C (±0.25pF)
5pF<Cap<10pF: D (±0.5pF)
Cap≥10pF: F (±1%), G (±2%),
J (±5%),K (±10%)
K (±10%), M (±20%) Z (-20/+80%)
Rated voltage (WVDC) 200V to 3kV 200V, 250V
Q* Cap<30pF: Q≥400+20C
Cap≥30pF: Q≥1000 ≤2.5% ≤5%
Insulation resistance at Ur** Ur=200~630V: ≥10GΩ or RxC≥100Ω-F whichever is smaller
Ur=1000~3000V: ≥10GΩ
Dielectric strength 200~300V: ≥2 x WVDC
500~999V: ≥1.5 x WVDC
1000~3000V: ≥1.2 x WVDC
Operating temperature -55 to +125°C -25 to +85°C
Capacitance characteristic ±30ppm ±15% +30/-80%
Termination Ni/Sn (lead-free termination)
* Measured at the condition of 30~70% related humidity.
NP0: Apply 1.0±0.2Vrms, 1.0MHz±10% for Cap≤1000pF and 1.0±0.2Vrms, 1.0kHz±10% for Cap>1000pF, 25°C at ambient temperature
X7R, Y5V: Apply 1.0±0.2Vrms, 1.0kHz±10%, at 20°C ambient temperature.
** Measured at 500VDC for 60 sec. for Ur>500VDC.
*** Preconditioning for Class II MLCC: Perform a heat treatment at 150±10°C for 1 hour, then leave in ambient condition for 24±2 hours
before measurement.
T
W
L
M
B
M
B
Fig. 1 The outline of MLCC
Size
Inch (mm)
L (mm) W (mm) T (mm)/Symbol Remark
M
B
(mm)
0603(1608)
1.60±0.10
0.80±0.10
0.80±0.07
S 0.40±0.15
0.60±0.10
A
0.80±0.10
B
0805 (2012)
2.00±0.15
1.25±0.10
1.25±0.10
D # 0.50±0.20
0.80±0.10
B
0.95±0.10
C
3.20±0.15
1.60±0.15
1.25±0.10
D #
1206 (3216)
3.20±0.20
1.60±0.20
1.60±0.20
G #
0.60±0.20
(0.5±0.25)*
0.95±0.10
C #
3.20±0.30
2.50±0.20
1.25±0.10
D #
1.60±0.20
G #
1210 (3225)
3.20±0.40
2.50±0.30
2.50±0.30
M #
0.75±0.25
1.25±0.10
D #
1808 (4520)
4.50+0.5/-0.3
2.03±0.25
2.00±0.20
K # 0.50±0.25
1.25±0.10
D #
1.60±0.20
G #
1812 (4532)
4.50+0.5/-0.3
3.20±0.30
2.00±0.20
K # 0.50±0.25
# Reflow soldering only is recommended.
* For 1206_1000V ~3000V products.
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 4 of 13 ASC_Middle & High Voltage_003U May. 2012
7. CAPACITANCE RANGE (MIDDLE VOLTAGE - 200V to 630V)
7-1 NP0 Dielectric
DIELECTRIC NP0
SIZE 0603 0805 1206 1210 1808 1812
RATED VOLTAGE
(VDC) 200
250
200
250
500
630
200
250
500
630
200
250
500
630
500
630
200
250
500
630
0.5pF (0R5)
S
S
A
A
A
A
1.0pF (1R0)
S
S
A
A
A
A
1.2pF (1R2)
S
S
A
A
A
A
1.5pF (1R5)
S
S
A
A
A
A
B
B
B
B
1.8pF (1R8)
S
S
A
A
A
A
B
B
B
B
D
D
2.2pF (2R2)
S
S
A
A
A
A
B
B
B
B
D
D
2.7pF (2R7)
S
S
A
A
A
A
B
B
B
B
D
D
3.3pF (3R3)
S
S
A
A
A
A
B
B
B
B
D
D
3.9pF (3R9)
S
S
A
A
A
A
B
B
B
B
D
D
4.7pF (4R7)
S
S
A
A
A
A
B
B
B
B
D
D
5.6pF (5R6)
S
S
A
A
A
A
B
B
B
B
D
D
6.8pF (6R8)
S
S
A
A
A
A
B
B
B
B
D
D
8.2pF (8R2)
S
S
A
A
A
A
B
B
B
B
D
D
10pF (100)
S
S
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
D
D
D
12pF (120)
S
S
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
D
D
D
15pF (150)
S
S
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
D
D
D
18pF (180)
S
S
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
D
D
D
22pF (220)
S
S
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
D
D
D
27pF (270)
S
S
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
D
D
D
33pF (330)
S
S
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
D
D
D
39pF (390)
S
S
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
D
D
D
47pF (470)
S
S
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
D
D
D
56pF (560)
S
S
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
D
D
D
68pF (680)
S
S
A
A
A
A
B
B
B
B
C
C
C
C
D
D
D
D
D
D
82pF (820)
S
S
A
A
B
B
B
B
B
B
C
C
C
C
D
D
D
D
D
D
100pF (101)
S
S
A
B
B
B
B
B
B
B
C
C
C
C
D
D
D
D
D
D
120pF (121)
S
S
A
B
D
D
B
B
B
B
C
C
C
C
D
D
D
D
D
D
150pF (151)
S
S
B
D
D
D
B
B
B
B
C
C
C
C
D
D
D
D
D
D
180pF (181)
S
S
B
D
D
D
B
B
B
B
C
C
C
C
D
D
D
D
D
D
220pF (221)
S
S
D
D
D
D
B
B
B
B
C
C
C
C
D
D
D
D
D
D
270pF (271)
X
X
D
D
D
D
B
C
C
C
C
C
C
C
K
K
D
D
D
D
330pF (331)
X
X
D
D
D
D
B
C
C
C
C
C
C
C
K
K
D
D
D
D
390pF (391)
X
X
D
D
D
D
B
C
C
C
C
C
C
C
K
K
D
D
D
D
470pF (471)
X
X
D
D
C
C
C
C
C
C
C
C
K
K
D
D
D
D
560pF (561)
D
D
C
D
D
D
C
C
C
C
K
K
D
D
D
D
680pF (681)
D
D
C
D
D
D
C
C
C
C
K
K
D
D
D
D
820pF (821)
D
D
C
G
G
G
C
C
C
C
K
K
D
D
D
D
1,000pF (102)
D
C
G
G
G
D
D
D
D
K
K
D
D
D
D
1,200pF (122)
C
G
G
G
D
D
D
D
D
D
D
D
1,500pF (152)
D
G
G
G
D
D
D
D
D
D
D
D
1,800pF (182)
D
G
G
G
D
D
D
D
D
D
D
D
2,200pF (222)
D
G
G
G
D
D
D
D
D
D
2,700pF (272)
D
D
D
D
D
D
3,300pF (332)
D
D
D
D
D
D
3,900pF (392)
D
D
D
4,700pF (472)
D
5,600pF (562)
D
Capacitance
6,800pF (682)
D
1. The letter in cell is expressed the symbol of product thickness.
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 5 of 13 ASC_Middle & High Voltage_003U May. 2012
7-2 X7R Dielectric
DIELECTRIC X7R
SIZE 0805 1206 1210 1808 1812
RATED VOLTAGE
(VDC) 200
250
500
630
200
250
500
630
200
250
500
630
500
630
200
250
500
630
100pF (101)
B
B
B
B
120pF (121)
B
B
B
B
150pF (151)
B
B
B
B
D
D
D
D
D
D
180pF (181)
B
B
B
B
D
D
D
D
D
D
220pF (221)
B
B
B
B
D
D
D
D
D
D
270pF (271)
B
B
B
B
D
D
D
D
D
D
330pF (331)
B
B
B
B
D
D
D
D
D
D
390pF (391)
B
B
B
B
D
D
D
D
D
D
470pF (471)
B
B
B
B
D
D
D
D
D
D
560pF (561)
B
B
B
B
D
D
D
D
D
D
680pF (681)
B
B
B
B
D
D
D
D
D
D
820pF (821)
B
B
B
B
D
D
D
D
D
D
1,000pF (102)
B
B
B
B
D
D
D
D
C
C
D
D
D
D
D
D
D
D
1,200pF (122)
B
B
B
B
D
D
D
D
C
C
D
D
D
D
D
D
D
D
1,500pF (152)
B
B
B
B
D
D
D
D
C
C
D
D
D
D
D
D
D
D
1,800pF (182)
B
B
B
B
D
D
D
D
C
C
D
D
D
D
D
D
D
D
2,200pF (222)
B
B
B
B
D
D
D
D
C
C
D
D
D
D
D
D
D
D
2,700pF (272)
B
B
B
B
D
D
D
D
C
C
D
D
D
D
D
D
D
D
3,300pF (332)
B
B
B
B
D
D
D
D
C
C
D
D
D
D
D
D
D
D
3,900pF (392)
B
B
B
B
D
D
D
D
C
C
D
D
D
D
D
D
D
D
4,700pF (472)
B
B
D
D
D
D
D
D
C
C
D
D
D
D
D
D
D
D
5,600pF (562)
D
D
D
D
D
D
D
D
C
C
D
D
K
K
D
D
D
D
6,800pF (682)
D
D
D
D
D
D
D
D
C
C
D
D
K
K
D
D
D
D
8,200pF (822)
D
D
D
D
D
D
D
D
C
C
D
D
K
K
D
D
D
D
0.010µF (103)
D
D
D
D
D
D
D
D
C
C
D
D
K
K
D
D
D
D
0.012µF (123)
D
D
D
D
D
D
C
C
D
D
D
D
D
D
0.015µF (153)
D
D
D
D
D
D
C
C
D
D
D
D
D
D
0.018µF (183)
D
D
D
D
D
D
C
C
D
D
D
D
D
D
0.022µF (223)
D
D
D
D
G
G
C
C
D
D
D
D
D
D
0.027µF (273)
D
D
G
G
C
C
G
G
D
D
D
D
0.033µF (333)
G
G
G
G
C
C
G
G
D
D
D
D
0.039µF (393)
G
G
C
C
G
G
D
D
D
D
0.047µF (473)
G
G
D
D
G
G
D
D
D
D
0.056µF (563)
G
G
D
D
G
G
D
D
K
K
0.068µF (683)
G
G
G
G
D
D
K
K
0.082µF (823)
G
G
G
G
D
D
K
K
0.10µF (104)
G
G
G
G
D
D
K
K
0.12µF (124)
G
G
D
D
0.15µF (154)
M
M
K
K
0.18µF (184)
M
M
K
K
0.22µF (224)
M
M
K
K
0.27µF (274)
M
M
K
K
0.33µF (334)
M
M
K
K
0.39µF (394)
M
M
K
K
0.47µF (474)
M
M
K
K
0.56µF (564)
M
M
0.68µF (684)
M
M
0.84µF (844)
M
M
Capacitance
1.0µF (105)
M
M
1. The letter in cell is expressed the symbol of product thickness.
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 6 of 13 ASC_Middle & High Voltage_003U May. 2012
7-3 Y5V Dielectric
DIELECTRIC Y5V
SIZE 0805 1206 1210 1812
RATED VOLTAGE (VDC)
200 250 200 250 200 250 200 250
0.010µF (103)
B B B B C C D D
0.015µF (153)
B B B B C C D D
0.022µF (223)
B B B B C C D D
0.033µF (333)
B B B B C C D D
0.047µF (473)
B B B B C C D D
0.068µF (683)
B B B B C C D D
0.10µF (104)
B B C C D D
0.15µF (154)
C C C C D D
0.22µF (224)
D D
0.33µF (334)
D D
0.47µF (474)
D D
0.68µF (684)
D D
Capacitance
1.0µF (105)
1. The letter in cell is expressed the symbol of product thickness.
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 7 of 13 ASC_Middle & High Voltage_003U May. 2012
8. CAPACITANCE RANGE (HIGH VOLTAGE - 1kV to 3kV)
8-1 NP0 Dielectric
DIELECTRIC NP0
SIZE 1206 1210 1808 1812
RATED VOLTAGE (VDC)
1000 2000 1000 2000 1000 2000 3000 1000 2000 3000
1.5pF (1R5)
B B
1.8pF (1R8)
B B
2.0pF (2R0)
B B D D D
2.2pF (2R2)
B B D D D
2.7pF (2R7)
B B D D D
3.3pF (3R3)
B B D D D
3.9pF (3R9)
B B D D D
4.7pF (4R7)
B B D D D
5.6pF (5R6)
B B D D D
6.8pF (6R8)
B B D D D
8.2pF (8R2)
B B D D D
10pF (100)
B B C C D D D D D D
12pF (120)
B B C C D D D D D D
15pF (150)
B B C C D D D D D D
18pF (180)
B B C C D D D D D D
22pF (220)
B B C C D D D D D D
27pF (270)
B B C C D D D D D D
33pF (330)
B C C C D D D D D D
39pF (390)
B C C C D D D D D D
47pF (470)
C C C C D D D D D D
56pF (560)
C D C D D D D D D D
68pF (680)
C D C D D D D D D D
82pF (820)
D D C D D D D D D D
100pF (101)
D D D D D D K D D D
120pF (121)
D G D D D D K D D D
150pF (151)
D G D G D K K D D D
180pF (181)
G G D G D K K D D K
220pF (221)
G G G G D K K D D K
270pF (271)
G G K K K D K K
330pF (331)
G G K K K D K K
390pF (391)
G G K K D K K
470pF (471)
G G K K K K K
560pF (561)
K K K K
680pF (681)
K K K K
820pF (821)
K K K
1,000pF (102)
K K K
1,200pF (122)
K
Capacitance
1,500pF (152)
K
1. The letter in cell is expressed the symbol of product thickness.
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 8 of 13 ASC_Middle & High Voltage_003U May. 2012
8-2 X7R Dielectric
DIELECTRIC X7R
SIZE 1206 1210 1808 1812
RATED VOLTAGE 1000 2000 1000 1000 2000 3000 1000 2000 3000
150pF (151)
D D D D D
180pF (181)
D D D D D
220pF (221)
D D D D D
270pF (271)
D D D D D D D
330pF (331)
D D D D K D D
390pF (391)
D D D D K D D
470pF (471)
D D D D K D D
560pF (561)
D D D D K D D
680pF (681)
D D D D K D D K
820pF (821)
D G D D K D D K
1,000pF (102)
D G D D K K D D K
1,200pF (122)
D G D D K D D
1,500pF (152)
D G D D K D D
1,800pF (182)
D G D D K D G
2,200pF (222)
D D D K D G
2,700pF (272)
D D D D G
3,300pF (332)
D D D D K
3,900pF (392)
D G D D K
4,700pF (472)
D G D D K
5,600pF (562)
D G K D
6,800pF (682)
D G K D
8,200pF (822)
D G K D
0.010µF (103)
D G K D
0.012µF (123)
K
Capacitance
0.015µF (153)
K
1. The letter in cell is expressed the symbol of product thickness.
2. The letter in cell with “^” mark is expressed product with Ag/Ni/Sn terminations.
9. PACKAGING DIMENSION AND QUANTITY
Paper tape Plastic tape
Size Thickness/Symbol
(mm) 7” reel 13” reel 7” reel 13” reel
0603 0.80±0.07 S 4k 15k - -
0.60±0.10 A 4k 15k - -
0.80±0.10 B 4k 15k - -
0805 1.25±0.10 D - - 3k 10k
0.80±0.10 B 4k 15k - -
0.95±0.10 C - - 3k 10k
1.25±0.10 D - - 3k 10k
1206
1.60±0.20 G - - 2k 10k
0.95±0.10 C - - 3k 10k
1.25±0.10 D - - 3k 10k
1.60±0.20 G - - 2k -
1210
2.50±0.30 M - - 1k 6k
1.25±0.10 D - - 2k 10k
1808 2.00±0.20 K - - 1k 6k
1.25±0.10 D - - 1k 5k
1.60±0.20 G - - 1k -
1812 2.00±0.20 K - - 1k -
Unit: pieces
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 9 of 13 ASC_Middle & High Voltage_003U May. 2012
10. RELIABILITY TEST CONDITIONS AND REQUIREMENTS
No.
Item Test Condition Requirements
1.
Visual and
Mechanical
--- * No remarkable defect.
* Dimensions to conform to individual specification sheet.
2.
Capacitance * Shall not exceed the limits given in the detailed spec.
3.
Q/ D.F.
(Dissipation
Factor)
Class I: (NP0)
Cap≤1000pF, 1.0±0.2Vrms, 1MHz±10%
Cap>1000pF, 1.0±0.2Vrms, 1KHz±10%
Class II: (X7R, Y5V)
1.0±0.2Vrms, 1kHz±10%
NP0: Cap≥30pF, Q≥1000; Cap<30pF, Q≥400+20C
X7R: ≤2.5%
Y5V: ≤5.0%
4.
Dielectric
Strength
* To apply voltage:
200V~300V ≥2 times VDC
500V~999V ≥1.5 times VDC
1000V~3000V ≥1.2 times VDC
* Cut-off, set at 10mA
* TEST= 15 sec.
* RAMP=0
* No evidence of damage or flash over during test.
Rated voltage:
200~630V
To apply rated voltage (500V max.)
for 60 sec.
≥10GΩ or RxC≥100Ω-F whichever is smaller
5.
Insulation
Resistance
Rated voltage: ≥630V To apply 500V for 60 sec. ≥10GΩ
6.
Temperature
Coefficient
With no electrical load.
T.C. Operating Temp
NP0 -55~125°C at 25°C
X7R -55~125°C at 25°C
Y5V -25~85°C at 20°C
T.C. Capacitance Change
NP0 Within ±30ppm/°C
X7R Within ±15%
Y5V Within +30%/-80%
7.
Adhesive
Strength of
Termination
* Pressurizing force：
5N (≤0603) and 10N (>0603)
* Test time: 10±1 sec.
* No remarkable damage or removal of the terminations.
8.
Vibration
Resistance
* Vibration frequency: 10~55 Hz/min.
* Total amplitude: 1.5mm
* Test time: 6 hrs. (Two hrs each in three mutually
perpendicular directions.)
* No remarkable damage.
* Cap change and Q/D.F.: To meet initial spec.
9.
Solderability * Solder temperature: 235±5°C
* Dipping time: 2±0.5 sec.
95% min. coverage of all metalized area.
10.
Bending Test
* The middle part of substrate shall be pressurized by means
of the
pressurizing rod at a rate of about 1 mm per second until
the deflection becomes 1 mm and then the pressure shall be
maintained for 5±1 sec.
* Measurement to be made after keeping at room temp. for
24±2 hrs.
* No remarkable damage.
* Cap change：
NP0: within ±5.0% or ±0.5pF whichever is larger.
X7R: within ±12.5%
Y5V: within ±30%
(This capacitance change means the change of capacitance under
specified flexure of substrate from the capacitance measured before
the test.)
11.
Resistance to
Soldering Heat
* Solder temperature: 260±5°C
* Dipping time: 10±1 sec
* Preheating: 120 to 150°C for 1 minute before imme rse the
capacitor in a eutectic solder.
* Before initial measurement (Class II only): Perform
150+0/-10°C for 1 hr and then set for 48±4 hrs at r oom temp.
* Measurement to be made after keeping at room temp. for
24±2 hrs. (Class I) or 48±4 hrs. (Class II).
* No remarkable damage.
* Cap change:
NP0: within ±2.5% or ±0.25pF whichever is larger.
X7R: within ±7.5%
Y5V: within ±20%
* Q/D.F., I.R. and dielectric strength: To meet initial requirements.
* 25% max. leaching on each edge.
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 10 of 13 ASC_Middle & High Voltage_003U May. 2012
No.
Item Test Condition Requirements
12.
Temperature
Cycle
* Conduct the five cycles according to the temperatures and
time.
Step
Temp. (°C) Time (min.)
1 Min. operating temp. +0/-3 30±3
2 Room temp. 2~3
3 Max. operating temp. +3/-0 30±3
4 Room temp. 2~3
* Before initial measurement (Class II only): Perform
150+0/-10°C for 1 hr and then set for 48±4 hrs at r oom temp.
* Measurement to be made after keeping at room temp. for
24±2 hrs. (Class I) or 48±4 hrs. (Class II).
* No remarkable damage.
* Cap change
：
NP0: within ±2.5％ or ±0.25pF whichever is larger.
X7R: within ±7.5%
Y5V: within ±20%
* Q/D.F., I.R. and dielectric strength: To meet initial requirements.
13.
Humidity
(Damp Heat)
Steady State
* Test temp.: 40±2°C
* Humidity: 90~95% RH
* Test time: 500+24/-0hrs.
* Measurement to be made after keeping at room temp. for
24±2 hrs. (Class I) or 48±4 hrs. (Class II).
* No remarkable damage.
* Cap change: NP0: within ±5.0% or ±0.5pF whichever is larger.
X7R: within ±12.5%
Y5V: within ±30%
* Q/D.F. value:
NP0: Cap≥30pF, Q≥350; 10pF≤Cap<30pF, Q≥275+2.5C
Cap<10pF; Q≥200+10C
X7R: ≤3.0%
Y5V: ≤7.5%
* I.R.: ≥1GΩ or RxC≥50Ω-F whichever is smaller.
14.
Humidity
(Damp Heat)
Load
* Test temp.: 40±2°C
* Humidity: 90~95%RH
* Test time: 500+24/-0 hrs.
* To apply voltage：rated voltage (Max. 500V)
* Measurement to be made after keeping at room temp. for
24±2 hrs. (Class I) or 48±4 hrs. (Class II).
* No remarkable damage.
* Cap change: NP0: within ±7.5% or ±0.75pF whichever is larger.
X7R: within ±12.5%
Y5V: within ±30%
* Q/D.F. value:
NP0: Cap≥30pF, Q≥200; Cap<30pF, Q≥100+10/3C
X7R: ≤3.0%
Y5V: ≤7.5%
* I.R.: ≥500MΩ or RxC≥25Ω-F whichever is smaller.
15.
High
Temperature
Load
(Endurance)
* Test temp.:
NP0, X7R: 125±3°C
Y5V: 85±3°C
* To apply voltage:
(1) <500V: 200% of rated voltage.
(2) 500V: 150% of rated voltage.
(3) ≥630V: 120% of rated voltage.
* Test time: 1000+24/-0 hrs.
* Measurement to be made after keeping at room temp. for
24±2 hrs. (Class I) or 48±4 hrs. (Class II).
* No remarkable damage.
* Cap change: NP0: within ±3.0% or ±0.3pF whichever is larger.
X7R: within ±12.5%
Y5V: within ±30%
* Q/D.F. value:
NP0: Cap≥30pF, Q≥350
10pF≤Cap<30pF, Q≥275+2.5C
Cap<10pF, Q≥200+10C
X7R: ≤3.0%
Y5V: ≤7.5%
* I.R.: ≥1GΩ or RxC≥50Ω-F whichever is smaller.
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 11 of 13 ASC_Middle & High Voltage_003U May. 2012
APPENDIXES
◙ Tape & reel dimensions
Size 0603 0805 1206 1210 1808 1812
Thickness
S, X B C, D, I
B C, D G C, D, G
M D K D, K
A
0
1.02±0.05
1.50±0.10
<1.57 2.00±0.10
<1.85 <1.95 <2.97 <2.97 <2.35 <2.35 <3.81
B
0
1.80±0.05
2.30±0.10
<2.40 3.50±0.10
<3.46 <3.67 <3.73 <3.73 <4.98 <5.00 <5.30
T 0.95±0.05
0.95±0.05
0.23±0.05
0.95±0.05
0.23±0.05
0.23±0.05
0.23±0.05
0.23±0.05
0.25±0.05
0.25±0.05
0.25±0.05
K
0
- - <2.50 - <2.50 <2.50 <2.50 <3.0 <2.50 <2.50 <2.50
W 8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
8.00±0.10
12.0±0.20
12.0±0.20
12.0±0.20
P
0
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.100
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
10xP
0
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
40.0±0.10
P
1
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
4.00±0.10
8.00±0.10
P
2
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
2.00±0.05
D
0
1.55±0.05
1.55±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
1.50±0.05
D
1
- - 1.00±0.10
- 1.00±0.10
1.00±0.10
1.00±0.10
1.00±0.10
1.50±0.10
1.50±0.10
1.50±0.10
E 1.75±0.05
1.75±0.05
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
1.75±0.10
F 3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
3.50±0.05
5.50±0.05
5.50±0.05
5.50±0.05
Fig. 3 The dimension of plastic tape
Fig. 4 The dimension of reel
Fig. 2 The dimension of paper tape
Size 0603, 0805, 1206, 1210 1808, 1812
Reel size
7” 10” 13” 7”
C 13.0+0.5/-0.2 13.0+0.5/-0.2 13.0+0.5/-0.2 13.0+0.5/-0.2
W
1
8.4+1.5/-0 8.4+1.5/-0 8.4+1.5/-0 12.4+2.0/-0
A 178.0±0.10 250.0±1.0 330.0±1.0 178.0±0.10
N 60.0+1/-0 100.0±1.0 100±1.0 60.5±1.0
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 12 of 13 ASC_Middle & High Voltage_003U May. 2012
◙ Description of customer label
◙ Constructions
◙ Storage and handling conditions
(1) To store products at 5 to 40°C ambient temperature and 20 to 70%. related humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life
extension is needed.
Cautions: a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability.
Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide,
chlorine, ammonia gas etc.)
b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low
reliability.
c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by
direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under
direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture.
Fig. 5 The construction of MLCC
a. Customer name
b. WTC order series and item number
c. Customer P/O
d. Customer P/N
e. Description of product
f. Quantity
g. Bar code including quantity & WTC P/N or customer
h. WTC P/N
i. Shipping date
j. Order bar code including series and item numbers
k. Serial number of label
No.
Name NP0 NPO, X7R, Y5V
1
Ceramic material BaTiO
3
based
2
Inner electrode AgPd alloy Ni
3
Inner layer Ag Cu
4
Middle layer Ni
5
Termination
Outer layer Sn
* Partial NP0 items are with Ag/Ni/Sn terminations, please ref to product range of NP0
dielectric for detail.
Approval sheet
Middle and High Voltage Series (200V to 3kV)
Page 13 of 13 ASC_Middle & High Voltage_003U May. 2012
◙ Recommended soldering conditions
The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable
against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and
concentration of N
2
within oven are recommended.
Fig. 6 Recommended reflow soldering profile for SMT process
with SnAgCu series solder paste.
4℃
℃℃
℃/ sec max
Over 60sec at least by
natural cooling
4℃
℃℃
℃/ sec max
Over 60sec at least by
natural cooling
Fig. 7 Recommended wave soldering profile for SMT process
with SnAgCu series solder.
