Bits and cutters for MICROMOT drills and mills of industrial quality. MICROMOT DrillsSystem 0,8 0,5 d1 6 44 6 1,0 44 8 1,2 44 8 1,6 44 10 2,1 44 10 44 l1 l2 NO 28 874 NO 28 864 NO 28 852 NO 28 854 NO 28 856 NO 28 858 NO 28 862 HSS twist drill set to DIN 338. One each of 0.3 - 0.5 - 0.8 - 1.0 - 1.2 - 1.5 - 2.0 - 2.5 - 3.0 - 3.2mm diameter. HSS drill bits Purpose-made, selected, tungsten vanadium steel with high concentricity. Manufactured from a one-piece blank. High hardness for optimum life expectancy. For drilling metal, non-ferrous metals, plastic, PC cards and wood. Work speeds: hard materials approx. 3,000rpm, soft materials approx. 8 000rpm. All shanks 2.35mm. Grinding bits 7,0 7,0 2,5 2,5 6,0 5,0 2,5 6,0 7,0 7,0 5,0 5,0 9,0 9,0 8,0 8,0 13 13 113 3 5x 5x 5x NO 28 774 NO 28 778 3,0 3,0 5x NO 28 776 NO 28 772 NO 28 770 NO 28 780 Carborundum grinding bits High quality bits and sets of quality base materials of consistent hardness. Various shapes for widest possible range of applications. For working especially hard materials such as as well as hard metal alloys. Accurately dimensioned shafts of 2.35 or 3.0mm ensure maximum concentricity. Milling bits 5,0 3,0 6,0 10,0 6,0 4,0 5,0 5,0 8,0 6,0 3,0 3,0 NO 28 722 2,35 NO 28 727 2,35 NO 28 725 2,35 NO 28 724 NO 28 723 2,35 2,35 NO 28 726 NO 28 720 Tungsten vanadium milling bits Selected tungsten vanadium steel. Purpose made of stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life hard and soft woods, NF and precious metals, as well as plastics and plaster of paris. Ideal for milling, routing, shaping, profiling and slotting. Cutting discs 38 38 38 38 22 22 1,8 1,8 10 x NO 28 810 50 x NO 28 812 1,8 1,8 5x 10 x 50 x NO 28 808 NO 28 809 NO 28 820 Corundum discs Discs made of a special compound of diameter 22 or 38 x 0.7mm. Used to part alloys and metals, stainless steels, and NF metals as well as wood and plastics. All arbors 2.35mm. 18 22 22 1,8 1,8 1,8 Aluminium Oxide with reinforcement The cutting discs are available in 22 x 0.8 and 38 x 1.0mm. Nearly stock. Will cut alloyed, standard and stainless steels, NF metals, Arbor shaft 2.35mm. 1,0 1,5 2,0 1,0 u. 1,2 8 38 8 38 8 NO 28 326 5 3 2,0 2,5 3,0 NO 28 321 1,8 1,8 7 5 NO 28 272 2,3 d1,0 1 5,0 5,0 NO 28 240 Silicon carbide grinding bits Fine particles of consistent hardness for engraving and frosting of glass, ceramics and stellites. Also for use on cast steel, cast iron and other hard steels. All shafts 2.35mm. 3,1 Diamond twist drills With natural diamond dust for drilling precious stones (pearls, coral, turquoise). Shafts 2.35mm. 1,81 d 2,5 2,5 d1 d1 2,0 NO 28 250 NO 28 212 NO 28 222 Diamond grinding bits With consistently even coating of diamond dust. Shafts of 2.35mm made from stainless steel. Used for grinding and engraving hard materials: steel (even chrome-cobalt alloy), glass, ceramics, porcelain, plastics. 3,0 2,3 2,3 5,0 5,0 2,3 NO 28 255 5,0 5,0 1,0 2,3 44 Tungsten carbide milling drills (Speardrill) For drilling, milling and cutting fibre glass or PERTINAX circuit boards. Also for drilling pearls and similar. Shaft 2.35mm. 8,0 NO 28 270 cast iron, steel, 3 30 NO 28 320 NO 28 328 Hard microdrills Made of tungsten for optimum lifetime. For drilling glass, semi-precious stones, porcelain, ceramics, marble and other hard stones. With ideal cutting angle of 6. Shaft of 3mm. 7 0,8 u. 1,2 38 30 NO 28 324 0,6 u. 0,8 1,2 1,2 2,3 2,3 2,3 2,3 12 l2 2,3 4,0 4,0 5,0 5,0 2,1 2,1 44l 1 3,0 2,35 1 St. NO 28 710 1 St. NO 28 758 expectancy. All shafts 2.35 or 3.0mm. For use on 2,35 NO 28 759 1 St. 2,35 2,35 1 St. NO 28 761 NO 28 760 NO 28 750 NO 28 752 Tungsten carbide millers Made of wear-resistant tungsten. Used for vibration-free milling of high accuracy dimensions. It is advisable to secure workpieces well, avoiding accidents. For technical work on extremely hard materials: chrome-cobalt alloy, steel, non-ferrous metals, plastics. May be used for engraving and milling of PC cards. 1,8 16 38 38 38 20 1,8 1,8 1,8 1,8 19 22 5x NO 28 818 unbreakable, making it usable to remove and even wood and plastics. NO 28 830 NO 28 840 NO 28 842 Metal cutting blades Spring steel, 0.1mm thick. For nonferrous metals, plastic and wood. Shaft 2.35mm Diamond cutting disc Only 0.6mm thick. For cutting very hard materials such as steel, porcelain, fibreglass, non-ferrous metals. Arbor 2.35mm. 19