Thick Film Trimmable Chip Resistors 1/8 Page 1.Scope: This specification applies for the RT (Suitable for laser trimming ) series of thick film chip resistors made by TA-I. 2.Construction: Conductor Over Coat Plating Sn or Sn / Pb Resistive Element Ni Plating Ceramic Substrate 3.Explanation of Part Number: RT Trimmable 10 K Series T Tolerance Packaging Chip Resistor 103 Nominal Resistance 04-0402 1/16W K-10% T-Paper Tape 06-0603 1/10W M-20% E-Embossed Tape 10-0805 1/8W N-30% B-Bulk Cassette 12-1206 1/4W Special 13-1210 1/3W L: 06 - 2mm pitch E24 - 10k paper Tape Tel: 714-525-9123, Fax: 714-525-9130 E-mail: tyeeusa@tyeeusa.com URL: http://www.tyeeusa.com Thick Film Trimmable Chip Resistors 2/8 Page 4.Dimensions: UNIT: mm Style L W C d t RT04 1.0 0.1 - 0.05 0.5 0.05 0.2 0.1 0.250.1 0.35 0.05 RT06 1.6 0.1 0.8 0.1 0.3 0.2 0.3 +0.2 -0.1 0.45 0.1 RT10 2.0 0.1 1.25 0.1 0.4 0.2 0.4 0.2 0.5 0.1 RT12 3.1 0.1 1.55 0.1 0.5 0.3 0.4 0.2 0.6 0.1 RT13 3.1 0.1 2.55 0.1 0.5 0.3 0.4 0.2 0.6 0.1 5.Ratings & Characteristics: Power Rating at 70 Max. Working Voltage Max. Over Load Voltage RT04 1/16W 25V 50 RT06 1/10W 50V 100 RT10 1/8W 150V 300V RT12 1/4W 200V 400 RT13 1/3W 200V 400 Style Operating Temp. () -55~+125 Resistance Tolerance 10% 20% 30% Resistance Range () Std Res. Value Temp Co-efficient PPM/ 10~1M E-24 200 Note :Except for the above standardized products, we provide the special specification which meets customer's requirements. Tel: 714-525-9123, Fax: 714-525-9130 E-mail: tyeeusa@tyeeusa.com URL: http://www.tyeeusa.com Thick Film Trimmable Chip Resistors 3/8 Page 5.1Power Derating: The rated power at the temperature in excess of 70 shall be derated in accordance with figure 1. 100 P max. Power ratio (%) 50 0 -55 50 70 Ambient 100 155 Temp. ( C ) Figure 1 5.2Rated Voltage: The D.C. or A.C. continuous working voltage corresponding to the rated power is determined by the following formula: E= P*R E=Rated Voltage(V) P=Rated Power(W) R=Resistance Value() 6.Reliability Tests:(As specified in JIS C 5202) Test Items Temperature Coefficient of Resistance Reference standard Condition of Test Test Limits JIS-C5202-5.2 +25 ~ +125 Refer 5.0 JIS-C5202-5.5 2.5 X rated power for 5s JIS-C5202-5.8 3.0 X rated power or Max Overloading Voltage, 1sec "ON", 25sec "OFF", 10000 cycles (Remarks: 0201 / 0402 2.5 X RCWV *) (1% + 0.05 ) Remarks: 0402 : (2% + 0.1 ) 0 : 50m or less (5.0%+0.1) 0 : 50m or less JIS-C5202-7.10 1000 hours at rated power , 70 , 1.5hours "ON ", 0.5hour "OFF" JIS-C5202-7.9 1000 hours at rated power , 402, 90~95% RH 1.5hours "ON ", 0.5hour "OFF" Short Time Overload Intermittent Overload Test Load Life Load Life with Humidity Tel: 714-525-9123, Fax: 714-525-9130 0.5%,1%:(1.0%+0.05) 2%,5%:(3.0%+0.1) Remarks: 0402 : (3.0%+0.1) 0 : 100m or less 0.5%,1%:(1.0%+0.05) 2%, 5%:(3.0%+0.1) Remarks: 0402: (3.0%+0.1) 0 : 100m or less Without mechanical damage E-mail: tyeeusa@tyeeusa.com URL: http://www.tyeeusa.com Thick Film Trimmable Chip Resistors 4/8 Page -55 (30 min. ) / +125 (30 min. ) 5 cycles Rapid Change of Temperature JIS-C5202-7.4 270 5 solder , 10 1 sec dwell . Resistance to Soldering Heat JIS-C5202-6.10 2355 solder, 20.5 sec dwell. Solderability JIS-C5202-6.11 3mm deflection Robustness of Termination (Bending Strength) JIS-C5202--6.1 Dielectric Withstanding Voltage (Voltage Proof) JIS-C5202-5.7 Insulation Resistance JIS-C5202-5.6 Resistance to Dry Heat Applying voltage: 0201: 50V, 0402 & 0603: 300V The other 500V for a minute . Applying voltage 100V for 1 minute. Remark: 0201 50V 1255 for 964hrs JIS-C5202-7.2 0.5%,1%:(0.5%+0.05) 2%, 5%:(1.0%+0.05) Remarks: 0 : 50m or less 0.5%,1%:(0.5%+0.05) 2%, 5%:(1.0%+0.05) Remarks: 0: 50m or less At least 95% of surface area of electrode shall be covered with new solder. 0.5%,1%:(0.5%+0.05) 2%,5%:(1.0%+0.05) Remarks: 0: 50m or less No abnormalities such as flashover, burning dielectric breakdown shall appear. 1G 0.5%,1%:(1.0%+0.05) 2%,5%:(2.0%+0.1) Remark: 0: 50m or less Note*: RCWV: Rated continuous working voltage. 7. Taping & Reel 7.1 Taping Dimensions 7.1.1 4 mm pitch paper UNIT: mm Packing Style Paper RM06 RM10 RM12 RM13 A B 1.10.1 1.90.1 1.60.15 2.40.2 2.00.15 3.60.2 2.80.2 3.60.2 Tel: 714-525-9123, Fax: 714-525-9130 W F E P1 P2 P0 D0 T 0.640.1 +0.1 8.00.2 3.50.05 1.750.1 4.00.1 2.00.05 4.00.1 1.5 -0 0.840.1 E-mail: tyeeusa@tyeeusa.com URL: http://www.tyeeusa.com Thick Film Trimmable Chip Resistors 5/8 Page 7.1.2 2 mm pitch paper UNIT: mm Packing Style Paper A B W RM04 0.70.05 1.20.05 RM06 1.10.1 1.90.1 F 8.00.2 3.50.05 E 1.750.1 P1 P2 2.00.1 2.00.1 2.00.1 2.00.1 P0 4.00.1 D0 +0.1 1.5 -0 T 0.450.1 0.640.1 Paper Tape Package Style RM RM RM RM RM Size 04 06 10 12 13 4 mm pitch 180mm/R 250mm/R 5000 5000 5000 5000 10000 10000 10000 2 mm pitch 180mm/R 250mm/R 10000 10000 20000 20000 Bulk 50000 20000 10000 5000 7.2 Storage Conditions: The resistors with appropriate package would have a preservative duration of 1 year. Temperature: 5~35,Humidity:40%~75% 7.3 Reel Specifications Tel: 714-525-9123, Fax: 714-525-9130 E-mail: tyeeusa@tyeeusa.com URL: http://www.tyeeusa.com Thick Film Trimmable Chip Resistors 6/8 Page UNIT: mm Style RM04 / 06/10 RM12 /13 A 180 +0 -3 B C 60 min 13.01.0 W 9.01.0 T 11.42.0 7.4 Peel -off force: Peel -off force of paper and blister tape is in accordance with "IEC 60286-3" that is, 0.2 to 1.0 N at a peel-off speed of 300 mm / minute. PULL 300 mm/min Top cover tape 10 ~ 15 STANDARD : 0.2 ~ 1.0 N carrier tape Tel: 714-525-9123, Fax: 714-525-9130 E-mail: tyeeusa@tyeeusa.com URL: http://www.tyeeusa.com Thick Film Trimmable Chip Resistors 7/8 Page 8. BULK Case Specifications: UNIT: mm slider 12 Coupled Portion 36 100 9. Label Part number TA-I TECH Customer Number RT10MT100 63.12134.151STS Customer Label Date Code To Indicate Tolerance TYPE QTY: 5000 PCs 100 LOT NO: 1058111-1 0105 M RT10MT Manufacture Label Tel: 714-525-9123, Fax: 714-525-9130 E-mail: tyeeusa@tyeeusa.com URL: http://www.tyeeusa.com Thick Film Trimmable Chip Resistors Page 8/8 10. Recommended land patterns Land pattern Type Size RM RM RM RM RM 04 (0402) 06 (0603) 10 (0805) 12 (1206) 13 (1210) a Dimension (mm) b c 0.50~0.6 0.7~0.9 1.0~1.4 2.0~2.4 2.0~2.4 1.4~1.6 2.0~2.2 3.2~3.8 4.4~5.0 4.4~5.0 0.4~0.6 0.8~1.0 0.9~1.4 1.2~1.8 2.3~3.5 11.ECN Engineering Change Notice: The customer will be informed with ECN if there is significant modification on the characteristics and materials described in Approval Sheet. 12. Manufacturing Country & City: TA-I TECHNOLOGY CO., LTD. (Taiwan- Taoyuan) Tel: 886-3-3246169 Fax: 886-3-3246167 Associated companies: (1) FORTUNE TASK RESISTOR FACTORY (China - Kwangtung) Tel: 86-769-3394790 Fax: 86-769-3394794 (2) TA-I TECHNOLOGY (SU ZHOU) CO., LTD. (China - Jiang-Su) Tel: 86- 512-3457879 Fax : 86-512-3457869 (3) TAI OHM ELECTRONICS (M) SDN. BHD. (Malaysia - Pulaupinang) Tel: 604- 3900480 Fax: 604-3901481 (4) P.T.TAI ELECTRONICS Indonesia (Indonesia - Jakarta) Tel :002-62-21-44820254 Fax: 002-62-21-44820256 Tel: 714-525-9123, Fax: 714-525-9130 E-mail: tyeeusa@tyeeusa.com URL: http://www.tyeeusa.com