Advanced Power N-CHANNEL ENHANCEMENT MODE
Electronics Corp. POWER MOSFET
▼ Simple Drive Requirement BVDSS 100V
▼ Lower On-resistance RDS(ON) 55mΩ
▼ RoHS Compliant & Halogen-Free ID16A
Description
Absolute Maximum Ratings
Symbol Units
VDS V
VGS V
ID@TC=25℃A
ID@TC=100℃A
IDM A
PD@TC=25℃W
PD@TA=25℃W
TSTG ℃
TJ℃
Symbol Value Units
Rthj-c Maximum Thermal Resistance, Junction-case 4 ℃/W
Rthj-a Maixmum Thermal Resistance, Junction-ambient 65 ℃/W
Data and specifications subject to change without notice
Total Power Dissipation 1.92
Thermal Data Parameter
Storage Temperature Range
Total Power Dissipation 31.3
-55 to 150
Operating Junction Temperature Range
Continuous Drain Current, VGS@10V 10
Pulsed Drain Current160
Gate-Source Voltage +20
Continuous Drain Current, VGS@10V 16
Parameter Rating
Drain-Source Voltage 100
201011081
1
AP30T10GI-HF
-55 to 150
Halogen-Free Product
G
D
S
A
dvanced Power MOSFETs from APEC provide the
designer with the best combination of fast switching,
ruggedized device design, low on-resistance and cost-effectiveness.
The TO-220CFM isolation package is widely preferred for
commercial-industrial through hole applications.
GDSTO-220CFM(I)
Electrical Characteristics@Tj=25oC(unless otherwise specified)
Symbol Parameter Test Conditions Min. Typ. Max. Units
BVDSS Drain-Source Breakdown Voltage VGS=0V, ID=250uA 100 - - V
RDS(ON) Static Drain-Source On-Resistance2VGS=10V, ID=12A - - 55 mΩ
VGS=4.5V, ID=8A - - 85 mΩ
VGS(th) Gate Threshold Voltage VDS=VGS, ID=250uA 0.9 - 2.5 V
gfs Forward Transconductance VDS=10V, ID=12A - 14 - S
IDSS Drain-Source Leakage Current VDS=80V, VGS=0V - - 25 uA
IGSS Gate-Source Leakage VGS= +20V, VDS=0V - - +100 nA
QgTotal Gate Charge2ID=12A - 13.5 21.6 nC
Qgs Gate-Source Charge VDS=80V - 3 - nC
Qgd Gate-Drain ("Miller") Charge VGS=4.5V - 9 - nC
td(on) Turn-on Delay Time2VDS=50V - 6.5 - ns
trRise Time ID=12A - 18 - ns
td(off) Turn-off Delay Time RG=1Ω-20-ns
tfFall Time VGS=10V - 5 - ns
Ciss Input Capacitance VGS=0V - 840 1340 pF
Coss Output Capacitance VDS=25V - 115 - pF
Crss Reverse Transfer Capacitance f=1.0MHz - 80 - pF
RgGate Resistance f=1.0MHz - 1.6 3.2 Ω
Source-Drain Diode
Symbol Parameter Test Conditions Min. Typ. Max. Units
VSD Forward On Voltage2IS=12A, VGS=0V - - 1.3 V
trr Reverse Recovery Time2IS=12A, VGS=0V - 40 - ns
Qrr Reverse Recovery Charge dI/dt=100A/µs - 70 - nC
Notes:
1.Pulse width limited by Max. junction temperature.
2.Pulse test
THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION.
USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED.
APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED
HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN.
2
AP30T10GI-HF
A
P30T10GI-H
F
Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics
Fig 3. On-Resistance v.s. Gate Voltage Fig 4. Normalized On-Resistance
v.s. Junction Temperature
Fig 5. Forward Characteristic of Fig 6. Gate Threshold Voltage v.s.
Reverse Diode Junction Temperature
3
0
10
20
30
40
50
0246810
VDS , Drain-to-Source Voltage (V)
ID , Drain Current (A)
TC=25oC10V
7.0V
6.0V
5.0V
VGS =4.0V
0
10
20
30
40
0 4 8 12 16
VDS , Drain-to-Source Voltage (V)
ID , Drain Current (A)
TC=150oC10V
7.0V
6.0V
5.0V
VGS =4.0V
0.2
0.6
1.0
1.4
1.8
2.2
2.6
3.0
-50 0 50 100 150
Tj , Junction Temperature ( oC)
Normalized RDS(ON)
ID=12A
VG=10V
0
4
8
12
16
20
0 0.2 0.4 0.6 0.8 1 1.2 1.4
VSD , Source-to-Drain Voltage (V)
IS(A)
Tj=25oCTj=150oC
0.0
0.4
0.8
1.2
1.6
-50 0 50 100 150
Tj , Junction Temperature ( oC)
Normalized VGS(th) (V)
40
50
60
70
246810
VGS Gate-to-Source Voltage (V)
RDS(ON) (m
Ω
)
I
D=8A
TC=25oC
AP30T10GI-H
F
Fig 7. Gate Charge Characteristics Fig 8. Typical Capacitance Characteristics
Fig 9. Maximum Safe Operating Area Fig 10. Effective Transient Thermal Impedance
Fig 11. Switching Time Waveform Fig 12. Gate Charge Waveform
4
0
2
4
6
8
10
0 4 8 12 16 20 24
QG , Total Gate Charge (nC)
VGS , Gate to Sourc e Voltage ( V)
VDS =50V
V DS =60V
V DS =80V
ID=12A
Q
VG
4.5V
QGS QGD
QG
Charge
0
200
400
600
800
1000
1200
1 5 9 13 17 21 25 29
VDS , Drain-to-Source Voltage (V)
C (pF)
f
=1.0MH
z
Ciss
Coxx
Crss
0.001
0.01
0.1
1
0.00001 0.0001 0.001 0.01 0.1 1 10
t , Pulse Width (s)
Normalized Th e rmal Re sponse (Rthjc)
PDM
Duty factor = t/T
Peak Tj = PDM x Rthjc + TC
t
T
0.02
0.01
0.05
0.1
0.2
Duty factor=0.5
Single Pulse
0.1
1
10
100
0.1 1 10 100 1000
VDS , Drain-to-Source Voltage (V)
ID (A)
Tc=25oC
S
in
g
le Puls
e
100us
1ms
10ms
100ms
1s
DC
td(on) trtd(off) tf
VDS
VGS
10%
90%
Operation in this area
limited by RDS(ON)
