RQ-125 125W Quad Output Switching Power Supply series Features : Universal AC input / Full range Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test High realibility .. SPECIFICATION MODEL OUTPUT RQ-125B RQ-125D 5V 12V -5V -12V 5V 15V -5V -15V 5V 12V 24V -12V RATED CURRENT 11A 4.5A 1A 0.5A 10A 4A 1A 0.5A 8A 2.5A 2A 0.5A 0 ~ 1A 2 ~ 12A 0.5 ~ 4A 0.1 ~ 1A 0 ~ 1A 2 ~ 12A 0.5 ~ 4A 0.1 ~ 2.5A 0 ~ 1A CURRENT RANGE Note.6 2 ~ 12A RATED POWER Note.6 120W 0.5 ~ 4.5A 0.1 ~ 1A 122.5W 124W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 80mVp-p 80mVp-p 80mVp-p 120mVp-p 80mVp-p 80mVp-p 80mVp-p 120mVp-p 150mVp-p 80mVp-p VOLTAGE ADJ. RANGE CH1: 4.75 ~ 5.5V +8,-3% VOLTAGE TOLERANCE Note.3 2.0% +6,-10% 5.0% CH1: 4.75 ~ 5.5V 2.0% +8,-3% 8.0% 5.0% Note.4 0.5% 1.0% 1.0% 1.0% 0.5% 1.0% 1.0% 1.0% 0.5% 1.0% 1.0% 1.0% LOAD REGULATION Note.5 1.0% 3.0% 6.0% 2.0% 1.0% 3.0% 6.0% 2.0% 1.0% 3.0% 5.0% 2.0% 500ms, 20ms, 20ms/230VAC +6,-10% 5.0% CH1: 4.75 ~ 5.5V 2.0% +8,-3% LINE REGULATION SETUP, RISE, HOLD TIME INPUT RQ-125C DC VOLTAGE 1200ms, 30ms, 10ms/115VAC at full load VOLTAGE RANGE 88 ~ 132VAC / 176 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 79% AC CURRENT INRUSH CURRENT(max.) 3A/115VAC 2A/230VAC COLD START 50A/230VAC 248 ~ 373VDC(300VAC peak 5sec. No damage) 80% LEAKAGE CURRENT <2mA / 240VAC OVER LOAD 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed CH1: 5.75 ~ 6.75V PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 82% Protection type : Hiccup mode, recovers automatically after fault condition is removed -20 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 )on +5V output 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B (Note 7) OTHERS NOTE HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2) heavy industry level, criteria A MTBF 203.1Khrs min. MIL-HDBK-217F (25 199*98*38mm (L*W*H) 0.7Kg; 20pcs/14Kg/0.72CUFT DIMENSION PACKING ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. 6. Each output can work within current range. But total output power can't exceed rated output power. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. File Name:RQ-125-SPEC 2004-03-25 RQ-125 125W Quad Output Switching Power Supply Mechanical Specification Case No. 902 series Unit:mm 9 7 197 3.5 1 8.25 2 3 98 80 5 85.5 4 6 7 7 8 4- 3.5 M 3 57.5 4.5 120 199 190 9 38 3 3.5 3.5 3-M 18 18 9 9.5 6.5 157 22 Terminal Pin. No Assignment Assignment AC/L AC/N FG Pin No. 1 2 3 Pin No. 4 5 6 Assignment DC OUTPUT -V4 DC OUTPUT V3 DC OUTPUT +V2 Pin No. 7 8 Assignment DC OUTPUT COM DC OUTPUT +V1 Derating Curve Static Characteristics Ta=25 100 80 LOAD (%) LOAD (%) 60 40 20 -20 -20 0 0 10 20 30 40 AMBIENT TEMPERATURE ( 50 ) 60 70 (VERTICAL) (HORIZONTAL) 88 176 95 190 100 200 115 230 120 240 132 264 INPUT VOLTAGE (VAC) 60Hz File Name:RQ-125-SPEC 2004-03-25