2000, 2006
DESCRIPTION
The PS2913-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon
phototransistor in one package for high density mounting applications.
An ultra small flat-lead package has been provided which realizes a reduction in mounting area of about 30%
compared with the PS28xx series.
FEATURES
Ultra small flat-lead package (4.6 (L) × 2.5 (W) × 2.1 (H) mm)
Isolation distance (0.4 mm MIN.)
High collector to emitter voltage (VCEO = 120 V)
High isolation voltage (BV = 2 500 Vr.m.s.)
Ordering number of taping product: PS2913-1-F3, F4: 3 500 pcs/reel
• Safety standards
UL approved: File No. E72422
BSI approved: No. 8657, 8658
DIN EN60747-5-2 (VDE0884 Part2) approved (Option)
APPLICATIONS
• Hybrid IC
• Power supply
<R>
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PHOTOCOUPLER
PS2913-1
SINGLE Tr. OUTPUT, HIGH COLLECTOR TO EMITTER VOLTAGE
4-PIN ULTRA SMALL FLAT-LEAD
PHOTOCOUPLER NEPOC Series
Document No. PN10043EJ03V0DS (3rd edition)
Date Published May 2006 NS CP(K)
PACKAGE DIMENSIONS (UNIT: mm)
5.0±0.2
0.15
+0.1
–0.05
1.27
2.1 MAX.
0.4±0.1
2.5±0.3
43
12
N
4.6±0.2
0.2±0.1
4.1 MIN.
1. Anode
2. Cathode
3. Emitter
4. Collector
43
12
TOP VIEW
MARKING EXAMPLE
Assembly lot
6Week assembled
Year assembled
Last number of
type No. : 13
No. 1 pin
mark
(Nicked
corner)
An initial of "NEC"
01
13
601
N
*1
*1 Bar : Pb-Free
PHOTOCOUPLER CONSTRUCTION
Parameter Unit (MIN.)
Air Distance 4 mm
Creepage Distance 4 mm
Isolation Distance 0.4 mm
<R>
Data Sheet PN10043EJ03V0DS
2
PS2913-1
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification Packing Style Safety Standard
Approval Application
Part Number*1
PS2913-1 PS2913-1-A Pb-Free 50 pcs (Tape 50 pcs cut) Standard products PS2913-1
PS2913-1-F3 PS2913-1-F3-A
Embossed Tape 3 500 pcs/reel (UL, BSI approved)
PS2913-1-F4 PS2913-1-F4-A
PS2913-1-V PS2913-1-V-A
50 pcs (Tape 50 pcs cut) DIN EN60747-5-2
PS2913-1-V-F3 PS2913-1-V-F3-A
Embossed Tape 3 500 pcs/reel (VDE0884 Part2)
PS2913-1-V-F4 PS2913-1-V-F4-A
Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode Forward Current IF 50 mA
Forward Current Derating
IF/°C 0.5 mA/°C
Peak Forward Current*1 IFP 0.5 A
Power Dissipation PD 60 mW
Reverse Voltage VR 6 V
Transistor Collector to Emitter Voltage VCEO 120 V
Emitter to Collector Voltage VECO 6 V
Collector Current IC 30 mA
Power Dissipation Derating
PC/°C 1.2 mW/°C
Power Dissipation PC 120 mW
Isolation Voltage*2 BV 2 500 Vr.m.s.
Total Power Dissipation PT 160 mW
Operating Ambient Temperature TA 55 to +100 °C
Storage Temperature Tstg 55 to +150 °C
*1 PW = 100
µ
s, Duty Cycle = 1%
*2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output
Pins 1-2 shorted together, 3-4 shorted together.
<R>
Data Sheet PN10043EJ03V0DS 3
PS2913-1
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Diode Forward Voltage VF IF = 1 mA 0.9 1.1 1.3 V
Reverse Current IR VR = 5 V 5
µ
A
Terminal Capacitance Ct V = 0 V, f = 1 MHz 15 pF
Transistor Collector to Emitter Dark
Current ICEO IF = 0 mA, VCE = 120 V 100 nA
Coupled Cu r r e n t Tr a n s f e r R a t i o
(I
C
/I
F
)
*1
CTR IF = 1 mA, VCE = 5 V 50 100 200 %
Collector Saturation Voltage VCE (sat) IF = 1 mA, IC = 0.2 mA 0.13 0.3 V
Isolation Resistance RI-O VI-O = 1 kVDC 1011
Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF
Rise Time*2 tr VCC = 5 V, IC = 2 mA, RL = 100 10
µ
s
Fall Time*2 tf 10
On Time*2 ton VCC = 5 V, IF = 1 mA, RL = 5 k 80
µ
s
Storage Time*2 ts 5
µ
s
Off Time*2 toff 50
µ
s
*1 CTR rank
N : 50 to 200 (%)
K : 100 to 200 (%)
L : 75 to 150 (%)
M : 50 to 100 (%)
*2 Test circuit for switching time
V
CC
V
OUT
I
F
R
L
= 100 /5 k
50
Pulse Input
In monitor
PW = 100 s
Duty cycle = 1/10
µ
I
C
Data Sheet PN10043EJ03V0DS
4
PS2913-1
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
Ambient Temperature TA (˚C)
Maximum Forward Current IF (mA)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
Ambient Temperature TA (˚C)
Transistor Power Dissipation PC (mW)
TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
Forward Voltage VF (V)
Forward Current IF (mA)
FORWARD CURRENT vs.
FORWARD VOLTAGE
Collector to Emitter Voltage VCE (V)
Collector Current IC (mA)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
Ambient Temperature TA (˚C)
Collector to Emitter Dark Current ICEO (nA)
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
Collector Saturation Voltage V
CE(sat)
(V)
Collector Current I
C
(mA)
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
80
40
60
20
025 50 75 100
0.5 mA/˚C
140
100
120
40
60
80
20
25 50 75 100 125
0
100
10
1
0.1
0.01
0.0 0.5 1.0 1.5 2.0
0˚C
–25˚C
–50˚C
+60˚C
+25˚C
TA = +100˚C
50 000
0.1
500
5 000
10
10 000
1 000
100
50
5
1
0.5
–60 0 40 80–40 –20 20 60 100
VCE = 40 V
24 V
10 V
6842010
10
8
6
4
21 mA
0.5 mA
12 IF = 5 mA
2 mA
CTR = 100%
0.1
1
10
0.0 0.2 0.4 0.6 0.8 1.0
1 mA
IF = 0.5 mA
2 mA
5 mA
CTR = 100%
Remark The graphs indicate nominal characteristics.
Data Sheet PN10043EJ03V0DS 5
PS2913-1
FREQUENCY RESPONSE
Frequency f (kHz)
Normalized Gain Gv
LONG TERM CTR DEGRADATION
Time (Hr)
CTR (Relative Value)
Forward Current IF (mA)
Current Transfer Ratio CTR (%)
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
Normalized to 1.0
at T
A
= 25˚C,
I
F
= 1 mA, V
CE
= 5 V
Ambient Temperature T
A (˚C)
Normalized Current Transfer Ratio CTR
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
Switching Time t ( s)
µ
Load Resistance R
L
(Ω)
SWITCHING TIME vs.
LOAD RESISTANCE
1.2
1.4
–50
1.0
0.8
0.6
0.4
0.2
0.0 –25 025
50 75 100 0.1 110 100
0
100
150
200
250
300
1
10
100
1 000
10 000
V
CE
= 5 V,
n = 3
1k 10k 100 k 1 000 k
Sample A
B
C
1.2
0.4
0.0
0.8
0.6
0.2
1.0
R
L
= 1 k
510
300
100
500
1100.5 50 1005
1.2
1.0
0.0
0.4
0.2
0.8
0.6
10
2
10
3
110
4
10
5
10
6
I
F
= 1 mA, T
A
= 25˚C
I
F
= 5 mA, T
A
= 25˚C
I
F
= 20 mA, T
A
= 25˚C
I
F
= 20 mA, T
A
= 60˚C
;;
;
50
I
F
= 1 mA,
V
CC
= 5 V,
CTR = 120%
t
s
t
on
t
off
Remark The graphs indicate nominal characteristics.
Data Sheet PN10043EJ03V0DS
6
PS2913-1
TAPING SPECIFICATIONS (UNIT: mm)
PS2913-1-F3 PS2913-1-F4
1.55±0.05
4.0±0.1
2.0±0.05
4.0±0.1
1.75±0.1
2.9 MAX.
0.3
2.9±0.1 2.4±0.1
1.5
+0.1
–0
5.3±0.1
5.5±0.05
12.0±0.2
NNNNNNNN
Tape Direction
Outline and Dimensions (Tape)
Outline and Dimensions (Reel)
Packing: 3 500 pcs/reel
11.9 to 15.4
Outer edge of
flange
330±2.0
100±1.0
2.0±0.5
21.0±0.8
13.5±1.0
13.0±0.2
2.0±0.5
Data Sheet PN10043EJ03V0DS 7
PS2913-1
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
4.14
(0.35)
4.7
5.7
1.27
0.8
0.6
24-R0.1
( ) : Reference value
Remark This drawing is considered to meet air and outer creepage distance 4.0 mm minimum. All dimensions in
this figure must be evaluated before use.
Data Sheet PN10043EJ03V0DS
8
PS2913-1
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
Peak reflow temperature 260°C or below (package surface temperature)
Time of peak reflow temperature 10 seconds or less
Time of temperature higher than 220°C 60 seconds or less
Time to preheat temperature from 120 to 180°C 120±30 s
Number of reflows Three
Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
120±30 s
(preheating)
220˚C
180˚C
Package Surface Temperature T (˚C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260˚C MAX.
120˚C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
Number of times One (Allowed to be dipped in solder including plastic mold portion.)
Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
(3) Soldering by soldering iron
Peak temperature (lead part temperature) 350°C or below
Time (each pins) 3 seconds or less
Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
<R>
Data Sheet PN10043EJ03V0DS 9
PS2913-1
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ according
to product.
When using products other than at the specified forward current, the characteristics curves may differ from the
standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual
operating conditions and thoroughly take variations or the like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
<R>
Data Sheet PN10043EJ03V0DS
10
PS2913-1
The information in this document is current as of May, 2006. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
M8E 02. 11-1
(1)
(2)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
"Standard":
"Special":
"Specific":
Data Sheet PN10043EJ03V0DS 11
PS2913-1
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
0604
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: contact@ncsd-hk.necel.com
Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309
Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209
NEC Electronics (Europe) GmbH http://www.eu.necel.com/
TEL: +49-211-6503-0 FAX: +49-211-6503-1327
California Eastern Laboratories, Inc. http://www.cel.com/
TEL: +1-408-988-3500 FAX: +1-408-988-0279
Compound Semiconductor Devices Division
NEC Electronics Corporation
URL: http://www.ncsd.necel.com/
For further information, please contact
PS2913-1