DRAWING NUMBER REV
1501 ROUTE 34 SOUTH
FARMINGDALE, NJ 07727
TITLE
MATERIAL
FSCM
FINISH:
ALL DIM'S IN: INCHES (MM)
83330
THIS DRAWING AND THE CONTENTS HEREIN ARE CONFIDENTIAL AND
THE SOLE PROPERTY OF DIALIGHT. REPRODUCTION OF THIS DRAWING
OR CONSTRUCTION OF ANY PARTS WITHIN THIS DRAWING ARE
FORBIDDEN WITHOUT THE WRITTEN CONSENT OF DIALIGHT.
DIM "D" #.002
TYP (2 PLCS)
DIM "C"
.175#.020
4,44#0,5[ ]
90$
.250
[6,35]
.020
[0,51]
.175
[4,44]
MAX
.020
[0,5]
.200
[5,08]
.280
[7,11]
.100#.002
2,54#0,05[ ]
DIM "B" #.004
TYP
DIM "A" #.015
.100#.015
2,54#0,38[ ]
.145
[3,68]
B
3mm CBI, .200 HIGH CENTERLINE
REVERSE POLARITY; RoHS COMPLIANT
C-17686
DIALIGHT
PART NUMBER LED COLOR DIM
"A"
DIM
"B"
DIM
"C"
DIM
"D"
OPERATING CHARACTERISTICS AT 25$C AMBIENT
FORWARD
VOLTAGE
TEST COND
FORWARD
VOLTAGE
(V)
551-0207-010F GREEN DIFFUSED .105 .020 SQ. .122#.008 .043 5.6 16.0 IF = 10mA 3.0 563
551-0307-010F YELLOW DIFFUSED .105 .020 SQ. .122#.008 .043 IF = 10mA 2.2 6.3 IF = 10mA 2.1 3.0 10 585 45
551-0407-010F RED DIFFUSED .105 .020 SQ. .122#.008 .043 IF = 10mA 3.6 10 IF = 10mA 3.0 10 650 45
551-1107-010F RED DIFFUSED .095 .018 x .016 .118#.010 .040 IF = 2mA 1.0 1.6 IF = 2mA 1.7 2.2 635 60
551-1207-010F YELLOW DIFFUSED .095 .018 x .016 .118#.010 .040 IF = 2mA 1.0 1.6 IF = 2mA 1.8 2.7 50 585 60
551-1307-010F GREEN DIFFUSED .095 .018 x .016 .118#.010 .040 IF = 2mA 1.0 1.6 IF = 2mA 1.9 2.2 50 565 60
551-2507-010F ORANGE DIFFUSED .095 .018 SQ. .115#.010 .040 IF = 10mA 3.4 7.0 10.8 IF = 10mA 1.9 2.4 100 600 60
551-3007-010F RED/GREEN BI-COLOR
WHITE DIFFUSED LENS .095 .020 SQ. .118#.010 .043 IF = 10mA IF = 20mA 100 60
551-3107-010F YELLOW/GREEN BI-COLOR
WHITE DIFFUSED LENS .095 .018 x .016 .118#.010 .040 IF = 10mA IF = 20mA 100 80
ABSOLUTE MAXIMUM RATINGS AT 25$C AMBIENT
POWER
DISSIPATION
(mW)
CONT. FWD
CURRENT
(mA)
PEAK FWD
CURRENT
(mA)
REVERSE
VOLTAGE
(V)
SOLDERING
TEMPERATURE
FOR 5 SEC.
OPERATING
TEMPERATURE
STORAGE
TEMPERATURE
551-0207-010F 75 25 60 3 260 $C -25$C /+85 $C -30$C /+100$C
551-0307-010F 60 20 60 0.5 FROM 50$C 3 260 $C -25$C /+85 $C -30$C /+100$C
551-0407-010F 60 20 60 0.5 FROM 50$C 3 260 $C -25$C /+85 $C -30$C /+100$C
551-1107-010F 20 7 5 260 $C -55$C /+100$C -55$C /+100$C
551-1207-010F 20 7 0.7 FROM 90$C 5 260 $C -55$C /+100$C -55$C /+100$
C
551-1307-010F 20 7 0.7 FROM 90$C 5 260 $C -55$C /+100$C -55$C /+100$C
551-2507-010F 135 25 90 0.5 FROM 50$C 5 260 $C -55$C /+100$C -55$C /+100$C
551-3007-010F 100 30 120 0.4 FROM 50$C 5 260 $C -55$C /+100$C -55$C /+100$C
551-3107-010F 60 20 80 0.25 FROM 50$C 5 260 $C -55$C /+100$C -55$C /+100$C
SCALE: 5.000
TOLERANCES:
UNLESS OTHERWISE SPECIFIED
FRACTIONS: #1/64
DECIMALS (.XX): #.02
DECIMALS (.XXX): #.010
ANGLES: #3$
SHEET 1 OF 1 FAMILY TABLE:
REV ECN NO REVISIONS DRN CKD APP DATE
A NEW RELEASE KLJ NO MES
12-11-08
B ADDED P/N 551-0807-010F AJF KLJ NO 2-14-11
LUMINOUS
INTENSITY
TEST
CONDITION
LUMINOUS
INTENSITY
(mcd)
REVERSE
CURRENT
( A)
PEAK
WAVELENGTH
(nm)
VIEWING
ANGLE
(DEG)
MIN TYP MAX TYP MAX MAX TYP TYP
IF = 10mA 2.1 10 45
2.0
551-0807-010F
BLUE, WHITE DIFF. LENS
.101 .020 SQ. .110#.004 .043 IF = 10mA 14.0 22.4 35.5 IF = 10mA 3.5 4.1 10 428 70
50
2.5
3.7
4.7
10
2.0
2.1
2.8
2.8
635
565
2.5
2.5
4.3
6.3
2.1
2.1
2.8
2.8
585
565
PART
NUMBER
LINEAR
DERATION
(mA/$C)
0.5 FROM 50$C
551-0807-010F 90 20 .44 FROM 50$C 5 260
$C -55$C /+100$C -55$C /+100$C
0.7 FROM 90$C
RED
GREEN 100 30 120 0.4 FROM 50$C
YELLOW
GREEN 100 30 120 0.4 FROM 50$C
RECOMMENDED P.C.B. HOLE PATTERN
3mm LED
21ANODE FOR SINGLE COLORS
GREEN CATHODE FOR BI-COLORS
NOTES:
1. LED LEAD DIMENSIONS SHOWN ARE MEASURED AT HOUSING EXIT.
2. LEADS TO FIT INTO HOLES SPACED AS PER PATTERN.
3. PIN NUMBERS FOR REFERENCE ONLY, DESIGNATION NON-EXISTENT ON PART.
4. DIALIGHT PART NUMBERS: 551-XX07-010F.
5. THIS ASSEMBLY CONTAINS ELECTROSTATIC DISCHARGE SENSITIVE DEVICES
(ESDS). MAINTAIN ALL PRECAUTIONARY MEASURES DURING ASSEMBLY,
HANDLING, AND STORAGE IN ACCORDANCE WITH IPC-A-610.
RoHS COMPLIANT 551-XX07-010F
Part Numbers with the "F" suffix ending are RoHS Compliant.
For example: 551-0207-010F
Packaging is marked with "RoHS Compliant" label or equivalent
markings. Parts can be wave soldered, dip soldered or hand
soldered using typical lead-free soldering process with max
260°C temp. for 5 sec.
BI-COLOR LED SCHEMATIC
PIN 2
RED CATHODE FOR R/G
YEL CATHODE FOR Y/G
PIN 1
GRN CATHODE FOR R/G
GRN CATHODE FOR Y/G
SINGLE COLOR LED SCHEMATIC
PIN 2
CATHODE
PIN 1
ATTENTION:
OBSERVE PRECAUTIONS FOR
HANDLING ELECTROSTATIC
SENSITIVE DEVICES
