Economy Trimmers Type 416 Series Type 416 Series Characteristics Electrical This tiny 6mm square cermet trimmer is offered with alternative adjustment covers for screwdriver and automatic setting and can be supplied in bulk or taped in ammo pack. The 416 can be Resistance Range: 100R to 1M Resistance Values: 1, 2, 5 in each decade Resistance Tolerance: 25%, (20% by selection) End Resistance: 1% Nominal or 10 ohms maximum, whichever is greater. Wiper Current: 50mA Power Rating: 0.2W at 70C Derating to zero at 100C Limiting Element Voltage: 100V DC or AC RMS maximum Rotational Noise (CRV): 3% maximum Temperature Coefficient: 250ppm/C Characteristics Mechanical adjusted from the top or side and is an End Stop: 50 mNm minimum inexpensive solution to high reliability Starting Torque: 30 mNm maximum potentiometer Mechanical Adjustment: 240 nominal Operational Life: 100 turns requirements. This series is used to replace some of the larger, expensive, sealed types in high volume circuits. Characteristics Environmental Key Features Stable High Resolution Cermet Element Space-Saving Device 0.2 Watt Rating at 70C Wide Value Range Available Taped for Auto Insertion Dust and Splash Proof Top or Side Adjustment Auto Adjust Head Available Widely Available via Distribution Temperature Range: - 25C to + 100C Load Life at 70C: R < 5% after 1000 hours Sealing: Dust Proof Climatic Category: 25/100/21 Dimensions 416P 416X Literature No. 1773119 Issued: 09-05 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. www.tycoelectronics.com passives.tycoelectronics.com Economy Trimmers Type 416 Series Dimensions 416M How to Order 416 Common Part P A 104 Adjustment Style Adjustment Head Resistance Value / Configuration The first two digits are A - Cross Slot 416-6mm Low Cost Trimmer M P - Top Adjust 2.5mm x 5.0mm R - Auto Adjust X - Skeleton M - Top Adjust 5.0mm x 5.0mm X - Side Adjust 2.5mm x 5.0mm significant figures of resistance value and the third denotes the number of zeros following. Tolerance P - 25% (M - 20% by selection only) e.g. 100R: 101 1K0: 102 10K: 103 100K: 104 Please state top or side adjustments on all orders Literature No. 1773119 Issued: 09-05 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. www.tycoelectronics.com passives.tycoelectronics.com