Dimensions
416P
Economy Trimmers
Type 416 Series
Literature No. 1773119
Issued: 09-05
Dimensions are shown for
reference purposes only.
Dimensions are in millimetres
unless otherwise specified.
Specifications subject to
change.
www.tycoelectronics.com
passives.tycoelectronics.com
Key Features
■Stable High Resolution
Cermet Element
■Space-Saving Device
■0.2 Watt Rating at 70°C
■Wide Value Range
■Available Taped for Auto
Insertion
■Dust and Splash Proof
■Top or Side Adjustment
■Auto Adjust Head Available
■Widely Available via
Distribution
Type 416 Series
This tiny 6mm square cermet trimmer is
offered with alternative adjustment
covers for screwdriver and automatic
setting and can be supplied in bulk or
taped in ammo pack. The 416 can be
adjusted from the top or side and is an
inexpensive solution to high reliability
potentiometer requirements. This
series is used to replace some of
the larger, expensive, sealed types in
high volume circuits.
Characteristics -
Electrical
Characteristics -
Mechanical
End Stop: 50 mNm minimum
Starting Torque: 30 mNm maximum
Mechanical Adjustment: 240° nominal
Operational Life: 100 turns
Characteristics -
Environmental
Temperature Range: - 25°C to + 100°C
Load Life at 70°C: ∆R < 5% after 1000 hours
Sealing: Dust Proof
Climatic Category: 25/100/21
Resistance Range: 100R to 1M
Resistance Values: 1, 2, 5 in each decade
Resistance Tolerance: ± 25%, (±20% by selection)
End Resistance: 1% Nominal or 10 ohms maximum,
whichever is greater.
Wiper Current: 50mA
Power Rating: 0.2W at 70°C Derating to zero at 100°C
Limiting Element Voltage: 100V DC or AC RMS maximum
Rotational Noise (CRV): 3% maximum
Temperature Coefficient: ±250ppm/°C
416X
Economy Trimmers
Type 416 Series
Literature No. 1773119
Issued: 09-05
Dimensions are shown for
reference purposes only.
Dimensions are in millimetres
unless otherwise specified.
Specifications subject to
change.
www.tycoelectronics.com
passives.tycoelectronics.com
Dimensions
416M
How to Order
416 P A 104 M
Common Part
P - Top Adjust
2.5mm x 5.0mm
M - Top Adjust
5.0mm x 5.0mm
X - Side Adjust
2.5mm x 5.0mm
Adjustment Style
/ Configuration A - Cross Slot
R - Auto Adjust
X - Skeleton
Adjustment Head Resistance Value
416-6mm
Low Cost Trimmer
The first two digits are
significant figures of
resistance value and
the third denotes the
number of zeros
following.
e.g. 100R: 101
1K0: 102
10K: 103
100K: 104
Tolerance
P - 25%
(M - 20%
by selection only)
Please state top or side adjustments on all orders
