2007-04-02 Silicon NPN Phototransistor NPN-Silizium-Fototransistor Version 1.0 SFH 309, SFH 309 FA SFH 309 SFH 309 FA Features: Besondere Merkmale: * Spectral range of sensitivity: 380 nm ... 1180 nm (SFH 309), 880 nm...1120 nm (SFH 309 FA) * * * * * Spektraler Bereich der Fotoempfindlichkeit: 380 nm ... 1180 nm (SFH 309), 880 nm...1120 nm (SFH 309 FA) * Gehause: 3mm Radial (T 1), Harz * Besonderheit: Hohe Fotoempfindlichkeit * Hohe Linearitat * Gruppiert lieferbar Package: 3mm Radial (T 1), Epoxy Special: High photosensitivity High linearity Available in groups Applications Anwendungen * Photointerrupters * Industrial electronics * For control and drive circuits 2007-04-02 * Lichtschranken * Industrieelektronik * Messen / Steuern / Regeln 1 Version 1.0 SFH 309, SFH 309 FA Ordering Information Bestellinformation Type: Photocurrent Typ: Fotostrom Ordering Code Bestellnummer 2 = 950 nm, Ee = 0.5 mW/cm , VCE = 5 V IPCE [A] SFH 309 400 ... 5000 Q62702P0859 SFH 309-3/4 630 ... 2000 Q62702P3592 SFH 309-4 1000 ... 2000 Q62702P0998 SFH 309-4/5 1000 ... 3200 Q62702P3593 SFH 309-5 1600 ... 3200 Q62702P0999 SFH 309-5/6 1600 ... 5000 Q62702P3594 SFH 309 FA 400 ... 5000 Q62702P0941 SFH 309 FA-3/4 630 ... 2000 Q62702P3590 SFH 309 FA-4 1000 ... 2000 Q62702P0178 SFH 309 FA-4/5 1000 ... 3200 Q62702P3591 SFH 309 FA-5 1600 ... 3200 Q62702P0180 SFH 309 FA-5/6 1600 ... 5000 Q62702P5199 Note: Only one bin within one packing unit (variation less than 2:1) Anm.: Nur eine Gruppe pro Verpackungseinheit (Streuung kleiner 2:1) Maximum Ratings (TA = 25 C) Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit SFH 309 Operating and storage temperature range Betriebs- und Lagertemperatur Top; Tstg Collector-emitter voltage Kollektor-Emitter-Spannung Collector current Kollektorstrom 2007-04-02 SFH 309 FA -40 ... 100 C VCE 35 V IC 15 mA 2 Version 1.0 SFH 309, SFH 309 FA Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Collector surge current Kollektorspitzenstrom ( < 10 s) ICS 75 mA Total power dissipation Verlustleistung Ptot 165 mW Thermal resistance Warmewiderstand RthJA 450 K/W SFH 309 SFH 309 FA Characteristics (TA = 25 C) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit SFH 309 SFH 309 FA Wavelength of max. sensitivity Wellenlange der max. Fotoempfindlichkeit S max 860 900 nm Spectral range of sensitivity Spektraler Bereich der Fotoempfindlichkeit 10% 380 ... 1150 730 ... 1120 nm Radiant sensitive area Bestrahlungsempfindliche Flache ( 220 m) A Dimensions of chip area Abmessung der Chipflache LxW Distance chip front to case surface Abstand Chipoberflache zu Gehauseoberflache H 2.4 ... 2.8 Half angle Halbwinkel 12 Capacitance Kapazitat (VCE = 0 V, f = 1 MHz, E = 0) CCE 5 pF Dark current Dunkelstrom (VCE = 20 V, E = 0) ICE0 1 ( 50) nA 2007-04-02 3 0.038 mm2 0.45 x 0.45 mm x mm mm Version 1.0 SFH 309, SFH 309 FA Grouping (TA = 25 C, = 950 nm) Gruppierung Group Min Photocurrent Max Photocurrent Typ Photocurrent Rise and fall time Gruppe Min Fotostrom Max Fotostrom Typ Fotostrom Ee = 0.5 mW/cm2, VCE = 5 V Ee = 0.5 mW/cm2, VCE = 5 V SFH 309: IC = 1 mA, EV = 1000 lx, Std. VCC = 5 V, Light A, VCE = 5 V RL = 1 k Anstiegs- und Abfallzeit IPCE, min [A] IPCE, max [A] IPCE [A] tr, tf [s] -2 400 800 1500 5 -3 630 1250 2800 6 -4 1000 2000 4500 7 -5 1600 3200 7200 8 -6 2500 5000 11200 9 Group Collector-emitter saturation voltage Gruppe Kollektor-Emitter Sattigungsspannung IC = IPCEmin x 0.3, Ee = 0.5 mW/cm2 VCEsat [mV] -2 200 -3 200 -4 200 -5 200 -6 200 Note.: IPCEmin is the min. photocurrent of the specified group. Anm.: IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe. 2007-04-02 4 Version 1.0 SFH 309, SFH 309 FA Relative Spectral Sensitivity Relative spektrale Empfindlichkeit SFH 309 FA Srel = f() Relative Spectral Sensitivity Relative spektrale Empfindlichkeit SFH 309 Srel = f() OHF01121 100 S rel % 80 60 40 20 0 400 600 800 1000 nm 1200 Photocurrent Fotostrom IPCE = f(VCE), Ee = Parameter Photocurrent Fotostrom IPCE = f(Ee), VCE = 5 V 2007-04-02 5 Version 1.0 SFH 309, SFH 309 FA Dark Current Dunkelstrom ICEO = f(VCE), E = 0 Photocurrent Fotostrom IPCE / IPCE(25C)= f(TA), VCE = 5 V PCE OHF01527 10 1 nA OHF01524 1.6 CEO PCE 25 1.4 10 0 1.2 1.0 10 -1 0.8 0.6 10 -2 0.4 0.2 0 -25 0 25 50 10 -3 75 C 100 TA 0 5 10 15 20 25 30 V 35 V CE Collector-Emitter Capacitance Kollektor-Emitter Kapazitat CCE = f(VCE), f = 1 MHz, E = 0 Dark Current Dunkelstrom ICE0 = f(TA), VCE = 20 V, E = 0 OHF01530 10 3 nA OHF01528 5.0 CEO C CE pF 4.0 10 2 3.5 3.0 10 1 2.5 2.0 1.5 10 0 1.0 0.5 10 2007-04-02 0 10 -2 -1 -25 0 25 50 75 C 100 TA 6 10 -1 10 0 10 1 V 10 2 V CE Version 1.0 SFH 309, SFH 309 FA Total Power Dissipation Verlustleistung Ptot = f(TA) Directional Characteristics Winkeldiagramm Srel = f() 2007-04-02 7 Version 1.0 SFH 309, SFH 309 FA Package Outline Mazeichnung Collector (Transistor) Cathode (Diode) o3.1 (0.122) o2.9 (0.114) 0.7 (0.028) 0.4 (0.016) 0.8 (0.031) 0.4 (0.016) 2.54 (0.100) spacing Area not flat 5.2 (0.205) 4.5 (0.177) 4.1 (0.161) 3.9 (0.154) 4.0 (0.157) 3.6 (0.142) 3.5 (0.138) 1.8 (0.071) 1.2 (0.047) 29 (1.142) 27 (1.063) 0.6 (0.024) 0.4 (0.016) Chip position 6.3 (0.248) 5.9 (0.232) GEOY6653 Dimensions in mm (inch). / Mae in mm (inch). 2007-04-02 8 Version 1.0 SFH 309, SFH 309 FA TTW Soldering Wellenloten (TTW) IEC-61760-1 TTW / IEC-61760-1 TTW OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2007-04-02 9 s 250 Version 1.0 SFH 309, SFH 309 FA Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2007-04-02 10 Version 1.0 SFH 309, SFH 309 FA Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2007-04-02 11