REV. Status REVISION 03/17/98 TS PREPARED BY: D. Kelley A. Electrical Specifications (@25C) N OPUS (each winding) B. Schematic Diagram; WINDING 1 C. Mechanical Specifications; 1 12.5(0.49) MAX SOLDER COATED TYP 4 PLACES t 2045(0.78740.197) Rated Voltage; 250V AC 50/60Hz Rated Current; 1A AC Common Mode Inductance (@ 1 KHz); 2mH MIN DC Resistance; Insulation Resistance; 100MQ MIN at 500VDC Winding to Winding, Winding to Core HiPot test; AC 2.0KV 1 minute Winding to Winding, Winding to Core Country of origin WINDING 2 | 28(1.1) MAX 0.251 MAX MODEL NUMBER | CMT-01102| 0.40(0.016) 4 PLACES START WINDING 1 FINISH WINDING 1 L 1.5(0.059) MAX WIRE INSULATION START WINDING 2 FINISH WINDING 2 ENGINEER: T. Shiozawa DWG CONTROL NO. PA411946 ACAD\MISCX\A41 119461 .DWG REV QUALITY CONTROL: D. Kelley CONTENTS OF THIS DRAWING ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE 43352 909 COIL COMMON MODE TAMURA CORPORATION OF AMERICA USINESS PARK DRIVE, TEMECULA, CA. 92590-6624 699-1270 FAX 9096769482 CMT01102 MODEL SPECIFICATION DIM: mm(In} SCL: 1/1 [SH 1 OF 1 APPROVED: D. Suzuki PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH TAMURA ETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, REPRODUCTION, MANUFACTURE AND SALE. THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN R CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING.