4.75 - 6 V Output Current TVL05-1220 TVL05-1225 TVL05-1516 TVL05-1520 Output Voltage Input Voltage Range 5 W AT T S U LT R A L O W N O I S E Model TVL SERIES 12 12 15 15 V V V V 208 mA +250 mA/-125 mA 167mA +200 mA/-100 mA DC - DC Converters Input Specification Input Range 4.75 to 6 V (5.5 V derating) Output Specification Line Regulation Load Regulation (0-100%) Temperature Regulation Stability Efficiency Ripple and Noise 0.03% typ. 0.06% max. (Input Voltage 4.75 V to 5.25 V) 0.18% typ. 0.35% max. 0.02%/C 10 mV/8 H max. (excluding initial drift) 60% 2 mV p-p typ. 3 mV p-p max. (20 MHz Bandwidth) General Specification Over Current Protection Heat Protection Shock MTBF TEP TEP TEP TEP TEP TEP TEP TEP 2411 2412 2422 2423 4811 4812 4822 4823 18 - 36 V DC 36 - 72 V DC 5.1 12 12 15 5.1 12 12 15 V V V V V V V V DC DC DC DC DC DC DC DC 1000 500 250 200 1000 500 250 200 mA mA mA mA mA mA mA mA Efficiency typ. Output Current Output Voltage Input Voltage Range U LT R A C O M PA C T 6 W AT T S Model TEP SERIES 83% 86% 86% 86% 84% 87% 87% 87% Input Specification Input Range No Load Input Current (typ) EMI (Conducted) See Table 24 V models: 24 mA max 48 V models: 12 mA max EN55022A (B with external components) Output Specification Voltage Accuracy Line Regulation Load Regulation (10-100%) 3% 0.5% 1.0% single output models 3.0% dual output models 0.05%/C Temperature Coefficient Ripple and Noise Ripple 2 MHz <80 mV pk-pk Spikes (20 MHz bandwidth) 150 mV pk-pk Conducted EMI to meet EN 55022-B and VDE 0871B may be accomplished by following external components: General Specification TVL/TEP-1 V.11-1 MTBF (MIL-HDBK-217E) Operating Temperature Isolation Input/Output Input/Case Output/Case Switching Frequency Soldering Temperature Case Material PHONE: >1,000,000 h/ +25 C -25 C to +71 C 1500 V DC/1 min 500 V DC/1 min 500 V DC/1 min 300 kHz (full load) 260 C/10 sec max Nicked Plated Steel 0118 984 5515 FAX: 0118 984 3423 E-mail: Pin 2 3 9 10 11 14 15 16 22 23 Pin-Out Single Dual - V in - V in - V in - V in n/c Out Com n/c n/c n/c - V out + V out + V out n/c n/c - V out Out Com + V in + V in + V in + V in sales@xpplc.co.uk 3 - 6 Watts NDY, TEH, TVL & TEP Series Operating Temperature Storage Temperature Operating Humidity Storage Humidity Cooling Method Withstand Voltage Isolation Resistance Vibration Greater than 105% up (Automatic activated and self-recovery type) Built-in heat protection in regulation section -25 C to +71 C (+50 C derating) -40 C to +85 C 30 to 95% RH 10 to 95% RH Free air convection Input to Output: DC500 V 1 min. Input to Output: 10 M at DC500 V 5 to 10 Hz amplitude 10 mm p-p. 10 to 55 Hz acceleration 2 G Acceleration 20 G max. Time 11 ms 500,000 Hr min. (MIL-HDBK-217F)