TVL SERIES 5 WATTS ULTRA LOW NOISE
TEP SERIES ULTRA COMPACT 6 WATTS
Input Specification
●Input Range See Table
●No Load Input Current (typ) 24 V models: 24 mA max
48 V models: 12 mA max
●EMI (Conducted) EN55022A (B with external components)
Output Specification
●Voltage Accuracy ±3%
●Line Regulation ±0.5%
●Load Regulation (10-100%) ±1.0% single output models
±3.0% dual output models
●Temperature Coefficient ±0.05%/°C
●Ripple and Noise
Ripple 2 MHz <80 mV pk-pk
Spikes (20 MHz bandwidth) 150 mV pk-pk
General Specification
●MTBF (MIL-HDBK-217E) >1,000,000 h/ +25 °C
●Operating Temperature -25 °C to +71 °C
●Isolation
Input/Output 1500 V DC/1 min
Input/Case 500 V DC/1 min
Output/Case 500 V DC/1 min
●Switching Frequency 300 kHz (full load)
●Soldering Temperature 260 °C/10 sec max
●Case Material Nicked Plated Steel
TEP 2411 5.1 V DC 1000 mA 83%
TEP 2412 12 V DC 500 mA 86%
TEP 2422 ±12 V DC 250 mA 86%
TEP 2423 ±15 V DC 200 mA 86%
TEP 4811 5.1 V DC 1000 mA 84%
TEP 4812 12 V DC 500 mA 87%
TEP 4822 ±12 V DC 250 mA 87%
TEP 4823 ±15 V DC 200 mA 87%
Model
Input
Voltage
Range
Output
Voltage
Output
Current
Efficiency
typ.
18 - 36 V DC
36 - 72 V DC
TVL05-1220
±12 V ±208 mA
TVL05-1225
±12 V +250 mA/-125 mA
TVL05-1516
±15 V ±167mA
TVL05-1520
±15 V +200 mA/-100 mA
Model
Input
Voltage
Range
Output
Voltage
Output
Current
4.75 - 6 V
Pin-Out
Pin Single Dual
2 – V in – V in
3 – V in – V in
9 n/c Out Com
10 n/c n/c
11 n/c – V out
14 + V out + V out
15 n/c n/c
16 – V out Out Com
22 + V in + V in
23 + V in + V in
●Conducted EMI to meet
EN 55022-B and VDE 0871B
may be accomplished by
following external
components:
Input Specification
●Input Range 4.75 to 6 V (5.5 V derating)
Output Specification
●Line Regulation 0.03% typ. 0.06% max.
(Input Voltage 4.75 V to 5.25 V)
●Load Regulation (0-100%) 0.18% typ. 0.35% max.
●Temperature Regulation ±0.02%/°C
●Stability 10 mV/8 H max. (excluding initial drift)
●Efficiency 60%
●Ripple and Noise 2 mV p-p typ. 3 mV p-p max.
(20 MHz Bandwidth)
General Specification
●Over Current Protection Greater than 105% up (Automatic
activated and self-recovery type)
●Heat Protection Built-in heat protection in regulation
section
●Operating Temperature -25 °C to +71 °C (+50 °C derating)
●Storage Temperature -40 °C to +85 °C
●Operating Humidity 30 to 95% RH
●Storage Humidity 10 to 95% RH
●Cooling Method Free air convection
●Withstand Voltage Input to Output: DC500 V 1 min.
●Isolation Resistance Input to Output: 10 M Ωat DC500 V
●Vibration 5 to 10 Hz amplitude 10 mm p-p.
10 to 55 Hz acceleration 2 G
●Shock Acceleration 20 G max. Time 11 ms
●MTBF 500,000 Hr min. (MIL-HDBK-217F)
DC - DC Converters 3 - 6 Watts NDY, TEH, TVL & TEP Series
PHONE: 0118 984 5515 FAX: 0118 984 3423 E-mail: sales@xpplc.co.uk
V.11-1
TVL/TEP-1