Keysight 33220A 20 MHz Function/Arbitrary Waveform Generator Data Sheet Product Discontinuance Notice The 33220A function generator and all associated options will be discontinued December 1, 2016. The last date this product can be ordered is November 30, 2016. -- For new product purchases, Keysight recommends the 33500B Trueform Series waveform generators. -- For more information, as well as to access to detailed migration guides, please visit www.keysight.com/find/nextgenFGs -- To contact a product selection expert, visit www.keysight.com/find/contactus Key Features -- Fully compliant to LXI Class C specification -- 20 MHz Sine and Square waveforms -- Pulse, Ramp, Triangle, Noise, and DC waveforms -- 14-bit, 50 MSa/s, 64 k-point arbitrary waveforms -- AM, FM, PM, FSK, and PWM modulation types -- Linear & logarithmic sweeps and burst operation -- 10 mVpp to 10 Vpp amplitude range -- Graph mode for visual verification of signal settings -- Connect via USB, GPIB and LAN Uncompromising performance for functions and waveforms The Keysight Technologies 33220A function/arbitrary waveform generator uses direct digital synthesis (DDS) techniques to create a stable, accurate output signal for clean, low distortion sine waves. It also gives you square waves with fast rise and fall times up to 20 MHz and linear ramp waves up to 200 kHz. Pulse generation Easy-to-use functionality The 33220A can generate variableedge-time pulses up to 5 MHz. With variable period, pulse width, and amplitude the 33220A is ideally suited to a wide variety of applications requiring a flexible pulse signal. Front-panel operation of the 33220A is straight-forward and user friendly. You can access all major functions with a single key or two. The knob or numeric keypad can be used to adjust frequency, amplitude, offset, and other parameters. You can even enter voltage values directly in Vpp, Vrms, dBm, or as high and low levels. Timing parameters can be entered in Hertz (Hz) or seconds. Custom waveform generation Use the 33220A to generate complex custom waveforms. With 14-bit resolution, and a sampling rate of 50 MSa/s, the 33220A gives you the flexibility to create the waveforms you need. It also lets you store up to four waveforms in nonvolatile memory. The Keysight IntuiLink arbitrary waveform software allows you to easily create, edit, and download complex waveforms using the waveform editor. Or you can capture a waveform using IntuiLink for Oscilloscope and send it to the 33220A for output. To find out more about IntuiLink, visit www.keysight.com/find/intuilink. Internal AM, FM, PM, FSK, and PWM modulation make it easy to modulate waveforms without the need for a separate modulation source. Linear and logarithmic sweeps are also built in, with sweep rates selectable from 1 ms to 500 s. Burst mode operation allows for a user-selected number of cycles per period of time. GPIB, LAN, and USB interfaces are all standard, plus you get full programmability using SCPI commands. External frequency reference (Option 001) The 33220A external frequency reference lets you synchronize to an external 10 MHz clock, to another 33220A, or to a Keysight 33250A. Phase adjustments can be made from the front panel or via a computer interface, allowing precise phase calibration and adjustment. 2 Measurement Characteristics Waveforms Standard Built-in arbitrary Sine, Square, Ramp, Triangle, Pulse, Noise, DC Exponential rise, Exponential fall, Negative ramp, Sin(x)/x, Cardiac Waveforms Characteristics Sine Frequency Range 1 Hz to 20 MHz Amplitude Flatness[1], [2] (relative to 1 kHz) < 100 kHz 0.1 dB 100 kHz to 5 MHz 0.15 dB 5 MHz to 20 MHz 0.3 dB Harmonic distortion[2], [3] DC to 20 kHz 20 kHz to 100 kHz 100 kHz to 1 MHz 1 MHz to 20 MHz < 1 VPP -70 dBc -65 dBc -50 dBc -40 dBc 1 VPP -70 dBc -60 dBc -45 dBc -35 dBc Total harmonic distortion[2], [3] DC to 20 kHz 0.04% Spurious (non-harmonic)[2], [4] DC to 1 MHz -70 dBc 1 MHz to 20 MHz -70 dBc + 6 dB/octave Phase noise (10 kHz offset) -115 dBc / Hz, typical Square Frequency range 1 Hz to 20 MHz Rise/Fall time < 13 ns Overshoot < 2% Variable duty cycle 20% to 80% (to 10 MHz) 40% to 60% (to 20 MHz) Asymmetry (@ 50% duty) 1% of period + 5 ns Jitter (RMS) 1 ns + 100 ppm of period Ramp, Triangle Frequency range 1 Hz to 200 kHz Linearity < 0.1% of peak output Variable Symmetry 0.0% to 100.0% Pulse Frequency range 500 Hz to 5 MHz Pulse width 20 ns minimum, (period 10s) 10 ns resolution Variable edge time < 13 ns to 100 ns Overshoot < 2% Jitter (RMS) 300 ps + 0.1 ppm of period Noise Bandwidth Arbitrary Frequency range Waveform length Amplitude resolution Sample rate Min. Rise/Fall Time Linearity Settling Time Jitter (RMS) Non-volatile memory 9 MHz typical 1 Hz to 6 MHz 2 to 64 k points 14 bits (including sign) 50 MSa/s 35 ns typical < 0.1% of peak output < 250 ns to 0.5% of final value 6 ns + 30 ppm four waveforms Common Characteristics Frequency Accuracy[5] (10 ppm + 3 pHz) in 90 days (20 ppm + 3 pHz) in 1 year 1 Hz Resolution Amplitude Range 10 mVPP to 10 VPP into 50 20 mVPP to 20 VPP into open circuit Accuracy[1], [2] (at 1 kHz) 1% of setting 1 mVPP Units VPP, Vrms, dBm Resolution 4 digits DC Offset Range (peak AC + DC) 5 V into 50 10 V into open circuit Accuracy[1], [2] 2% of offset setting 0.5% of amplitude 2 mV Resolution 4 digits Main Output Impedance 50 typical Isolation 42 Vpk maximum to earth Protection Short-circuit protected, overload automatically disables main output External Frequency Reference (Option 001) Rear Panel Input Lock Range Level Impedance Lock Time 10 MHz 500 Hz 100 mVPP to 5 VPP 1 k typical, AC coupled < 2 seconds 3 Rear Panel Output Frequency Level Impedance 10 MHz 632 mVPP (0 dBm), typical 50 typical, AC coupled Phase Offset Range Resolution Accuracy + 360 to - 360 0.001 20 ns Modulation AM Carrier waveforms Sine, Square, Ramp, Arb Source Internal/External Internal modulation Sine, Square, Ramp, Triangle, Noise, Arb (2 mHz to 20 kHz) Depth 0.0% to 120.0% FM Carrier waveforms Sine, Square, Ramp, Arb Source Internal/External Internal modulation Sine, Square, Ramp, Triangle, Noise, Arb (2 mHz to 20 kHz) Deviation DC to 10 MHz PM Carrier waveforms Sine, Square, Ramp, Arb Source Internal/External Internal modulation Sine, Square, Ramp, Triangle, Noise, Arb (2 mHz to 20 kHz) Deviation 0.0 to 360.0 degrees PWM Carrier waveform Pulse Source Internal/External Internal modulation Sine, Square, Ramp, Triangle, Noise, Arb (2 mHz to 20 kHz) Deviation 0% to 100% of pulse width FSK Carrier waveforms Sine, Square, Ramp, Arb Source Internal/External Internal modulation 50% duty cycle square (2 mHz to 100 kHz) External Modulation Input[6] (for AM, FM, PM, PWM) Voltage range 5 V full scale Input impedance 5 k typical Bandwidth DC to 20 kHz Measurement Characteristics (Continued) Sweep Waveforms Type Direction Sweep time Trigger Marker Sine, Square, Ramp, Arb Linear or Logarithmic Up or Down 1 ms to 500 s Single, External, or Internal falling edge of sync signal (programmable frequency) Burst[7] Waveforms Type Start/Stop Phase Internal Period Gate Source Trigger source Sine, Square, Ramp, Triangle, Pulse, Noise, Arb Counted (1 to 50,000 cycles), Infinite, Gated -360 to +360 1 s to 500 s External trigger Single, External or Internal Trigger Characteristics Trigger input Input level Slope Pulse width Input impedance Latency Jitter (rms) Trigger output Level Pulse width Output Impedance Maximum rate Fanout TTL compatible Rising or Falling, selectable > 100 ns >10 k, DC coupled < 500 ns 6 ns (3.5 ns for pulse) TTL compatible into 1 k > 400 ns 50 , typical 1 MHz 4 Keysight 33220As Programming Times (typical) Configuration times USB LAN GPIB Function Change 111 ms 111 ms 111 ms Frequency Change 1.5 ms 2.7 ms 1.2 ms Amplitude Change 30 ms 30 ms 30 ms Select User Arb 124 ms 124 ms 123 ms GPIB Arb Download Times (binary transfer) USB LAN 64 k points 96.9 ms 191.7 ms 336.5 ms 16 k points 24.5 ms 48.4 ms 80.7 ms 4 k points 7.3 ms 14.6 ms 19.8 ms General Power Supply Power Consumption Operating Environment Operating Temperature Operating Humidity Operating Altitude Storage Temperature State Storage Memory Interface Language Dimensions (W x H x D) Bench top Rack mount Weight Safety Designed to EMC Tested to Vibration and Shock Acoustic Noise Warm-up Time CAT II 100 - 240 V @ 50/60 Hz (-5%, +10%) 100 - 120 V @ 400 Hz (10%) 50 VA max IEC 61010 Pollution Degree 2 Indoor Location 0 to 55 C 5% to 80% RH, non-condensing Up to 3000 meters -30 to 70 C Power off state automatically saved. Four user-configurable stored states USB, GPIB, and LAN standard SCPI - 1993, IEEE-488.2 261.1 mm x 103.8 mm x 303.2mm 212.8mm x 88.3mm x 272.3mm 3.4 kg (7.5 lbs) UL-1244, CSA 1010, EN61010 MIL-461C, EN55011, EN50082-1 MIL-T-28800, Type III, Class 5 30 dBa 1 hour Footnotes 1. Add 1/10th of output amplitude and offset spec per C for operation outside the range of 18 to 28 C 2. Autorange enabled 3. DC offset set to 0 V 4. Spurious output at low amplitude is -75 dBm typical 5. Add 1 ppm/C average for operation outside the range of 18 to 28 C 6. FSK uses trigger input (1 MHz maximum) 7. Sine and square waveforms above 6 MHz are allowed only with an "infinite" burst count 4 Ordering Information Keysight 33220A 20 MHz function/arbitrary wavefrom generator Accessories included Operating manual, service manual, quick reference guide, IntuiLink waveform editor software, test data, USB cable, and power cord (see language option). Options Opt. 001 Opt. A6J Opt. AB0 Opt. AB1 Opt. AB2 Opt. ABA Opt. ABD Opt. ABF Opt. ABJ External timebase reference ANSI Z540 calibration Taiwan: Chinese manual Korea: Korean manual China: Chinese manual English: English manual Germany: German manual France: French manual Japan: Japanese manual Other Accessories 34131A 34161A 34190A 34191A 34194A Carrying case Accessory pouch Rackmount kit Dual flange kit, 2U Dual lock link kit 05 | Keysight | 33220A 20 MHz Function/Arbitrary Waveform Generator - Data Sheet myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.lxistandard.org LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. Keysight is a founding member of the LXI consortium. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to five years of protection and no budgetary surprises to ensure your instruments are operating to specification so you can rely on accurate measurements. www.keysight.com/quality Keysight Electronic Measurement Group DEKRA Certified ISO 9001:2008 Quality Management System Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight's measurement expertise and product breadth, combined with channel partner convenience. www.keysight.com/find/33220A For more information on Keysight Technologies' products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 0800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-05-29-14) This information is subject to change without notice. (c) Keysight Technologies, 2011 - 2015 Published in USA, May 21, 2015 5988-8544EN www.keysight.com