GENERAL PURPOSE NPN
SMALL SIGNAL TRANSISTOR
Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice.
Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However
Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to
verify that datasheets are current before placing orders.
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 9601
Issue 1
Page 1 of 3
BC107
• Hermetic TO-18 Metal package.
• Designed For Low Noise General Purpose Amplifiers,
Driver Stages and Signal Processing Applications
• Screening Options Available
ABSOLUTE MAXIMUM RATINGS
(TA = 25°C unless otherwise stated)
VCBO Collector – Base Voltage 50V
VCES Collector – Emitter Voltage 50V
VCEO Collector – Emitter Voltage 45V
VEBO Emitter – Base Voltage 6V
IC Continuous Collector Current 100mA
ICM Peak Collector Current 200mA
PD Total Power Dissipation at TA = 25°C 300mW
Derate Above 25°C 2mW/°C
TJ Junction Temperature Range -65 to +175°C
Tstg Storage Temperature Range -65 to +175°C
THERMAL PROPERTIES
Symbols Parameters Max. Units
RθJA
Thermal Resistance, Junction To Ambient 500 °C/W
GENERAL PURPOSE NPN
SMALL SIGNAL TRANSISTOR
BC107
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 9601
Issue 1
Page 2 of 3
ELECTRICAL CHARACTERISTICS
(TA = 25°C unless otherwise stated)
Symbols Parameters Test Conditions Min.
Typ Max.
Units
VCB = 45V IE = 0 15 nA
ICBO Collector-Cut-Off Current
TA = 125°C 4
IEBO Emitter-Cut-Off Current VEB = 4V IC = 0 1.0
µA
VBE
(1)
Base-Emitter Voltage IC = 2mA VCE = 5V 0.7
VCE(sat)
(1)
Collector-Emitter Saturation
Voltage IC = 10mA IB = 0.5mA 0.25
VBE(sat)
(1)
Base-Emitter Saturation
Voltage IC = 10mA IB = 0.5mA 0.83
V
hFE
(1)
Forward-current transfer
ratio IC = 2mA VCE = 5V 110 460
DYNAMIC CHARACTERISTICS
IC = 10mA VCE = 5V
fT Transition Frequency
f = 100MHz
150 MHz
IC = 2mA VCE = 5V
hfe Small-Signal Current Gain
f = 1.0KHz
125 500
VCB = 10V IE = 0
Cobo Output Capacitance
f = 1.0MHz
6 pF
VCE = 5V f = 1.0KHz,
IC = 0.2mA ∆f = 200Hz
NF
(2)
Noise Figure
RG = 2KΩ
10 dB
Notes
NotesNotes
Notes
(1) Pulse Width ≤ 300us, δ ≤ 2%
(2) By design only, not a production test.
GENERAL PURPOSE NPN
SMALL SIGNAL TRANSISTOR
BC107
Semelab Limited
Semelab LimitedSemelab Limited
Semelab Limited
Coventry Road, Lutterworth, Leicestershire, LE17 4JB
Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com
Document Number 9601
Issue 1
Page 3 of 3
MECHANICAL DATA
Dimensions in mm (inches)
TO
-
18 (TO
-
206AA) METAL PACKAGE
Underside View
Pin 1 - Emitter Pin 2 - Base Pin 3 – Collector
13 2
2.54 (0.100)
Nom.
0.48 (0.019)
0.41 (0.016)
dia.
5.84 (0.230)
5.31 (0.209)
4.95 (0.195)
4.52 (0.178)
5.33 (0.210)
4.32 (0.170)
12.7 (0.500)
min.
