0460152402 - Molex Inc. - Datasheet.Live

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 1 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

PRODUCT SPECIFICATION FOR

Mini-Fit Plus HCS™

INTERCONNECT SYSTEMS

Male Terminal

Plug Housing Receptacle Housing

Female Terminal

Headers for Wire-BoardCrimp Terminals and Housing for Wire-Wire

BMI Style Panel Mount Housings for Wire-Panel, Panel-Panel and Panel-Board

42475

BMI Slide and Lock Receptacle

46012

45750

55575559

5569

44516

BMI Plug Housing

BMI Receptacle w/ Spirals

42474

46015

Vertical Header

Right Angle Header

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 2 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

42404

BMI Style Headers for Panel-Board or Board-Board

BMI Surface Mount Compatible Style Headers

43810

BMI Right Angle Header

BMI SMC Right Angle Header

TPA Right Angle Header

30070

TPA Series Header and Housings for use with Plus HCS Terminals

30067

46010

87427

BMI Receptacle Header

BMI Vertical Header

46011

SMC Vertical Header

Also available in Right Angle

BMI SMC Vertical Header

44068

TPA Plug Housing

30068

30072

TPA Pin Mounting Ears

43130

TPA Receptacle Housing

CPA Key

30070

Product feature designations:

BMI Blind Mate Interface – features allowing easier alignment in panel-board and board to

board applications.

SMC Surface Mount Compatible - reflow solder temperatures up to 245°C.

TPA Terminal Position Assurance – helps ensure crimp terminals are fully engaged and

prevents terminals from backing out in high vibration applications.

CPA Connector Position Assurance – assures housing cannot be inadvertently disengaged.

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 3 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

MINI-FIT PLUS HCS

TABLE OF CONTENTS

SECTION PAGE

1.0 Scope 4

2.0 Product Description 4-5

2.1 Names and Series Numbers 4

2.2 Dimensions, Materials, Platings, and Markings 5

2.3 Safety Agency Approvals 5

3.0 Applicable Documents and Specifications 5

4.0 Packaging 5

5.0 Ratings 5-6

5.1 Voltage 5

5.2 Applicable Wires 5

5.3 Temperature 5

5.4 Wave Solder Process Temperature 5

5.5 Durability (Mating Cycles) 5

5.6 Maximum Current Carrying Capacities 6

Wire-To-Wire

Wire-To-Board

Board-To-Board

6.0 Product Performance Tests and Requirements 7-9

5.1 Electrical Requirements 7

5.2 Mechanical Requirements 7

5.3 Environmental Requirements 9

7.0 Test Sequences 11-13

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 4 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

1.0 SCOPE

This Product Specification covers the electrical, mechanical and environmental performance

requirements for the Mini-Fit Plus HCSTM (High Current System) in 4.20 mm (.165 inch) pitch. The

Mini-Fit Plus HCSTM uses contacts stamped in High Performance Alloy for increased current carrying

capacity, while maintaining properties at elevated operating temperatures. Wire-Wire, Wire-Panel,

Wire-Board, Panel-Panel, Panel-Board, and Board-Board configurations in Tin and Gold plated

systems. Crimp terminals accept 16 to 20 AWG stranded wire.

2.0 PRODUCT DESCRIPTION

2.1 SERIES NUMBERS, DESCRIPTION, SALES DRAWING NUMBERS

Agency Approval designations:

U-UL C-CSA T-TUV

SERIES DESCRIPTION SALES DRAWING TPA BMI SMC AGENCY

APP’L

CRIMP TERMINALS

45750 Female Crimp Terminal SD-46012-001

NA

46012 Male Crimp Terminal SD-45750-001

NA

HOUSINGS

5557 Receptacle Housing SD-5557-003

U,C,T

5559 Plug Housing SD-5559-NP

U,C,T

42475 Panel Mount BMI Plug Housing SD-42475-***1

X

U,C,T

43770 Panel Mount Plug Housing, 36 Ckt SD-43770-001

X

U,C,T

42474 Panel Mount Receptacle Housing SD-42474-****

X

U,C,T

43974 Panel Mount Receptacle Hsg 40 Ckt SD-43974-005

X

U,C,T

44516 Panel Mount Receptacle Housing,

Slide-and-Lock SD-44516-00* X U,C

30067 TPA Receptacle Housing SD-30067-*

X

U,C,T

30068 Panel Mount TPA Plug Housing SD-30068-*

X

U,C,T

VERTICAL HEADERS

44068 Vertical BMI SMC Header, solid pin SD-44068-031

X

U,C,T

46010 Vertical PCB Receptacle Header SD-46010-001

X

U,C

46011 Vertical BMI Header SD-46011-001

X

U,C

46014 Vertical Header, single row SD-46014-001

U,C

46015 Vertical Header, dual row SD-46015-001

U,C

87427 Vertical SMC Header SD-87427-**4*

X

U,C

RIGHT ANGLE HEADERS

5569 Right Angle Header SD-5569-002

U,C,T

30070 Right Angle TPA Header with

mounting flanges

SD-30070-001 X U,C,T

SDA-30070-****

42404 Right Angle BMI Header SDA-42404-****

X

U,C,T

43810 Right Angle BMI SMC Header SD-43810-0**

X

U,C,T

43973 Right Angle Header, 40 Ckt SD-43973-00*

X

U,C,T

45567 Right Angle Header, 36 Ckt SD-45567-001

X

U,C

87427 Right Angle SMC Header SD-87427-**0*,

-**1*, -**2* X U,C

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 5 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS

For details regarding dimensions, materials and terminal platings, refer to the appropriate

sales drawings for further information.

2.3 SAFETY AGENCY APPROVALS

UL File: E29179

CSA Certificate: LR19980

TUV Certificate: R72081037

3.0 APPLICABLE STANDARDS AND SPECIFICATIONS

- EIA-364-1000

- Molex solderability specification SMES-152

4.0 PACKAGING

Parts shall be packaged to protect against damage during normal handling, transit and storage. For

details refer to the Packaging Specification as called out on the applicable product Sales Drawing.

5.0 RATINGS

5.1 VOLTAGE

600 Volts AC RMS or 600 Volts DC

5.2 APPLICABLE WIRES

WIRE GAUGE INSULATION DIAMETER

16 AWG 1.80-3.10 millimeters / .071-.122 inches

18-20 AWG 1.65-2.95 millimeters / .065-.116 inches

5.3 TEMPERATURE RATING

Mini-Fit Plus HCS has a field temperature of 65°C and field life rating for 10 years based on

testing per EIA-364-17B, Method A.

5.4 WAVE SOLDER PROCESS TEMPERATURE

Headers with molded pegs: 240°C MAX.

Headers without pegs: 265°C MAX

5.5 DURABILITY (MATING CYCLES)

Tin: 100 cycles

Gold: 250 cycles

Durability ratings established as tested per Durability Test Procedures described by EIA-364-09C

and meet requirements for low level contact resistance and DWV as prescribed per EIA-364-1000

Test Sequence Group 7.

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 6 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

5.6 MAXIMUM CURRENT RATING (AMPERES)**

** Ratings shown represent MAXIMUM current carrying capacity of a fully loaded connector with

all circuits powered. Ratings are based on a 30°C maximum temperature rise limit over ambient

(room temperature). Testing conducted with tinned copper conductor stranded wire. Above

charts are intended as a guideline. Current rating is application dependent. Appropriate de-rating

is required depending on factors such as higher ambient temperature, smaller copper weight of

PCB traces, gross heating from adjacent modules or components and other factors that influence

connector performance.

WIRE-TO-WIRE

Wire Size

Single Row Circuit Sizes

Dual Row Circuit Sizes

3 4 5 2 4 6, 8 10, 12 14, 16, 18

20, 22, 24

16 AWG 13A 12.5A 12A 13A 12A 11A 10.5A 10A 9.5A

18 AWG 11A 10.5A 10A 11A 10A 9A 8.5A 8A 7.5A

20 AWG 9.5A 9A 9A 9.5A 8.5A 8A 7.5A 7A 6.5A

WIRE-TO-BOARD

Wire Size

Single Row Circuit Sizes

Dual Row Circuit Sizes

3 4 5 2 4 6, 8 10, 12 14, 16, 18

20, 22, 24

16 AWG 12.5A 12A 11.5A

12.5A 11.5A 10A 9A 8.5A 8.0A

18 AWG 10.5A 10A 9.5A 10.5A 9.5A 8.5A 8A 7.5A 7A

20 AWG 9A 8.5A 8.5A 9A 8A 7A 6.5A 6A 5.5A

BOARD-TO-BOARD

Dual Row Circuit Sizes

2 4 6, 8 10, 12 14, 16, 18

20, 22, 24

11.5A 11A 9.5A 8A 6.5A 5A

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 7 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

6.0 PRODUCT PERFORMANCE TESTS & REQUIREMENTS

6.1 ELECTRICAL REQUIREMENTS

ITEM

TEST

TEST PROCEDURE

REQUIREMENT

1

Contact

Resistance

(Low Level)

EIA-364-23: Mate connectors; apply a

maximum voltage of 20 mV and a current

of 100 mA. Wire resistance shall be

removed from the measured value.

10 mΩ Maximum Initial

resistance for each test

sequence. Resistance

measurements for subsequent

tests are the Maximum change

from Initial as specified.

2 Insulation

Resistance

Mate connectors: apply a voltage of 500

VDC between adjacent terminals and

between terminals to ground.

1000 Megohms

MINIMUM

3

Dielectric

Withstanding

Voltage

EIA-364-20: Apply a voltage of 1500 VAC

for 1 minute between adjacent contacts.

No breakdown.

Current leakage < 5 mA

4

Temperature Rise

(via Current Cycling)

EIA-364-70 (Temperature Rise) & EIA-364-

55 (Current Cycling): Apply current to

mated connectors & incrementally increase

until specified T-Rise is reached to

establish rated current. Measure the T-Rise

at the rated current after 96 hours, during

current cycling (45 minutes ON and 15

minutes OFF per hour) for 240 hours, and

after final 96-hour steady state.

Temperature rise:

+30°C MAXIMUM

6.2 MECHANICAL REQUIREMENTS

ITEM

TEST

TEST PROCEDURE

REQUIREMENT

1

Terminal Mate /

Unmate Forces

Per Circuit for:

Wire – Wire

;

Wire – Board

(formed pin header);

and

Wire – Board (solid

pin header)

Mate and unmate female to male crimp

terminal or female terminal to header at a

rate of 25 ± 6 mm (1 ± ¼ inch) per minute.

Testing to be conducted with individual

(single) circuit. Measure and record the

maximum mate and unmate forces across 5

mating cycles.

Tin, W-W & W-B (formed pin):

Mate: 15.6 N (3.50 lbf) MAX.

Unmate: 13.8N (3.10 lbf) MAX.

Gold, W-W & W-B (formed pin):

Mate: 4.9 N (1.10 lbf) MAX.

Unmate: 4.0 N (0.91 lbf) MAX.

Tin, W-

B (solid pin):

Mate: 10.5 N (2.36 lbf) MAX.

Unmate: 11.0N (2.47 lbf) MAX.

Gold, W-B (solid pin):

Mate: 3.4 N (0.77 lbf) MAX.

Unmate: 2.8 N (0.63 lbf) MAX.

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 8 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

6.2 MECHANICAL REQUIREMENTS (CON’D)

ITEM

TEST

TEST PROCEDURE

REQUIREMENT

2 Normal

Force

Apply a perpendicular force simultaneously

to each beam until the desired total

deflection is achieved. Return to original

size, then deflect beams a second time and

measure normal force.

3.5 N (360 g) MINIMUM

3 Durability

Per EIA-364-09C, mate connectors 100

cycles for tin plated product, 250 cycles for

gold plated product at a maximum rate of

500 cycles per minute.

10 mΩ Max. chg. from Initial;

Visual: No Damage

4 Durability

(preconditioning)

Mate connectors by hand, 20 cycles for tin

plated product, 50 cycles for gold as

required prior to environmental test

sequence as indicated.

Visual: no damage

5 Reseating Unmate / mate connectors by hand three

cycles. Visual: no damage

6 Vibration

(Random)

EIA 364-28: Mate connectors and vibrate

per, test condition VII.

10 mΩ Max. chg. from Initial;

Discontinuity < 1 microsecond

7

Crimp Terminal

Insertion Force

(into housing)

Apply an axial insertion force on the

terminal at a rate of 25 ± 6 mm (1 ± ¼

inches).

15.0 N (3.37 lbf)

MAXIMUM insertion force

8

Crimp Terminal

Retention Force

(in housing)

Axial pullout force on the terminal in the

housing at a rate of 25 ± 6 mm (1 ± ¼ inch)

per minute.

30 N (6.74 lbf)

MINIMUM retention force

9 Wire Crimp

Retention

Apply an axial pullout force on the wire at a

rate of 25 ± 6 mm (1 ± ¼ inches) per

minute.

16 Awg = 68.4 N (15.4 lbf) Min.

18 Awg = 68.4 N (15.4 lbf) Min.

20 Awg = 58.7 N (13.2 lbf) Min.

10 Thumb Latch

Operation Force

Depress latch at a rate of 25 ± 6mm (1 ± ¼

inches) per minute. 16.7 N (3.75 LBF) MAX.

11 Thumb Latch Yield

Strength

Manually mate and unmate unloaded

housings for 30 cycles. Following the 30th

mate, pull apart housings in an axial

direction at a rate of 25 ± 6mm (1 ± ¼

inches) per minute.

75.2 N (16.9 LBF) MIN.

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 9 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

6.2 MECHANICAL REQUIREMENTS (CON’D)

ITEM

TEST TEST PROCEDURE REQUIREMENT

12

Header Solid Pin

Retention Force

in Housing

Axial pullout force on the terminal in the

housing at a rate of 25 ± 6 mm (1 ± ¼ inch)

per minute.

Tin 4.45 N (1.00 lbf)

MINIMUM

Gold 4.45 N (1.00 lbf)

MINIMUM

13

Header Stamped Pin

Retention Force

in Housing

Axial pullout force on terminal from housing

at a rate of 25 ± 6 mm (1 ± ¼ inch) per

minute.

30 N (6.74 lbf)

MINIMUM retention force

14

PCB Peg

Engagement and

Separation Forces

Engage and separate a connector at a rate

of 25 ± 6 mm (1 ± ¼ inch) per minute.

(Applies to parts with PCB retention

features only)

98.0 N (22.0 lbf)

MAX. insertion force;

10.0 N (2.24 lbf)

MIN.

withdrawal force

6.3 ENVIRONMENTAL REQUIREMENTS

ITEM

TEST TEST PROCEDURE REQUIREMENT

1a Temperature Life

Group 1

Per EIA-364-17, method A: mate

connectors and expose to 240 hours at 105

± 2°C.

10 mΩ Max. chg. from Initial;

Visual: No Damage

1b

Temperature Life

(preconditioning)

Groups 3 & 5

Per EIA-364-17, method A: mate

connectors and expose to 120 hours at 105

± 2°C.

10 mΩ Max. chg. from Initial;

Visual: No Damage

1c

Temperature Life

(preconditioning)

Group 4

Per EIA-364-17, method A: mate

connectors and expose to 300 hours at 105

± 2°C.

10 mΩ Max. chg. from Initial;

Visual: No Damage

2 Thermal

Shock

Per EIA-364-32, method A, test condition I,

test duration A-4: mate connectors and

expose for 10 cycles between –55°C and

105° C; dwell 0.5 hours at each

temperature.

10 mΩ Max. chg. from Initial;

Visual: No Damage

Dielectric Strength per 5.1.3

Insulation Resistance per 5.1.2

3 Cyclic Temperature

& Humidity

Per EIA-364-31, method III w/o

conditioning, initial measurements, cold

shock and vibration. Cycle mated

connectors between 25°C ±3°C @ 80%

±3% RH and 65°C ±3°C @ 50% ±3RH.

Ramp time: 0.5 hr.; dwell time: 1 hr.

Perform 24 cycles.

10 mΩ Max. chg. from Initial;

Visual: No Damage

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 10 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

6.3 ENVIRONMENTAL REQUIREMENTS (CON’D)

4 Mixed Flowing Gas

Per EIA-364-65 with Class IIA gas

concentrations following Telcordia

Specification GR1217.

10 mΩ Max. chg. from Initial;

Visual: No Damage

5 Thermal Cycling

Per EIA-364-1000 Test Group 5: Cycle

mated connector between 15°C±3°C and

85°C±3°C as measured on the part. Ramps

should be a minimum of 2°C per minute,

and dwell times should insure contacts

reach the temperature extremes (minimum

of 5 minutes). Humidity is not controlled.

Perform 500 cycles.

10 mΩ Max. chg. from Initial;

Visual: No Damage

6 Solderability Per SMES-152

Solder coverage:

95% MINIMUM

(per SMES-152)

7

Solder Temperature

Heat Transfer

Resistance

Expose connector terminals tails to wave

solder process.

Dwell time duration: 5 ± 0.5 seconds;

Solder Temperature: 260 ± 5°C

Visual: No Damage to the

insulator where terminal or pin

locks to the connector housing.

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 11 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

7.0 TEST SEQUENCES

Environmental test sequences for Groups 1, 2, 3, 5 and 7 performed in accordance with

EIA-364-1000. Sequence for Group 4 per Nortel Optical Networks specification test plan.

Test Group 1

(10) Tin; (10) Gold

Initial Low Level

Contact Resistance

Durability

(preconditioning)

Low Level

Contact Resistance

Temperature Life

105°C for 240 hrs.

Low Level

Contact Resistance

Reseating

Final Low Level

Contact Resistance

Test Group 2

(10) Tin; (10) Gold

Initial Low Level

Contact Resistance

Durability

(preconditioning)

Low Level

Contact Resistance

Thermal Shock

(85°C to -55°C)

Low Level

Contact Resistance

Cyclic Humidity

(25°C @ 80% RH to

65°C @ 50% RH

Low Level

Contact Resistance

Reseating

Final Low Level

Contact Resistance

Test Group 3

(10) Tin; (10) Gold

Initial Low Level

Contact Resistance

Durability

(preconditioning)

Low Level

Contact Resistance

Temperature Life

(preconditioning)

105°C for 120 hrs.

Low Level

Contact Resistance

Vibration

Final Low Level

Contact Resistance

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 12 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

7.0 TEST SEQUENCES (CON’D)

Test Group 4

(10) Gold

Initial Low Level

Contact Resistance

Durability

50 cycles

Temperature Life

(preconditioning)

Low Level

Contact Resistance

Mixed Flowing Gas

5 Days

Low Level

Contact Resistance

Unmate / Mate

1 Cycle

Low Level

Contact Resistance

Mixed Flowing Gas

5 Days

Unmate / Mate

1 Cycle

Mixed Flowing Gas

5 Days

Low Level

Contact Resistance

Unmate / Mate

1 Cycle

Low Level

Contact Resistance

Mixed Flowing Gas

5 Days

Thermal Disturbance

Final Low Level

Contact Resistance

PRODUCT SPECIFICATION

REVISION: ECR/ECN INFORMATION: TITLE: PRODUCT SPECIFICATION FOR

MINI-FIT PLUS HCS

CONNECTOR SYSTEM

SHEET No.

C1 EC No: UCP2011-0141 13 of 13

DATE: 2010 /07/15

DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:

PS

-

45750

-

001

BWIRKUS BWIRKUS APATEL

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC

7.0 TEST SEQUENCES (CON’D)

Test Group 7

(10) Tin; (10) Gold

Initial Low Level

Contact Resistance

Dielectric withstanding

voltage

Low Level

Contact Resistance

Durability

100 cycles tin;

250 cycles gold

Final Low Level

Contact Resistance

Dielectric withstanding

voltage

Test Group 5

(10) Tin

Initial Low Level

Contact Resistance

Durability

(preconditioning)

Low Level

Contact Resistance

Temperature Life

(preconditioning)

105°C for 120 hrs.

Low Level

Contact Resistance

Thermal Cycling

15°C to 85°C

Low Level

Contact Resistance

Reseating

Final Low Level

Contact Resistance

Individual Tests

Mating / Unmating

Force (individual ckts.)

Temperature Rise

Crimped Wire

Retention

Insulation Resistance

Crimped Terminal

Insertion / Retention

Force in Housing

PC Tail Retention in

Housing

Thumb Latch

Operation Force

Solder Heat Transfer

Resistance

Thumb Latch Yield

Strength

PCB Peg Engagement

and Separation Forces

Solderability

Normal Force