FREQ. MULTIPLIERS - PASSIVE - SMT
7
7 - 30
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC204MS8G / 204MS8GE
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 4 - 8 GHz INPUT
v05.0607
General Description
Features
Functional Diagram
Conversion Loss: 17 dB
Fo, 3Fo, 4Fo Isolation: 42 dB
Passive: No Bias Required
Ultra Small Package: MSOP8
Electrical Speci cations, TA = +25° C, As a Function of Drive Level
Typical Applications
The HMC204MS8G / HMC204MS8GE is suitable for:
• Wireless Local Loop
• LMDS, VSAT, and Point-to-Point Radios
• UNII & HiperLAN
• Test Equipment
The HMC204MS8G & HMC204MS8GE are passive
miniature frequency doublers in 8 lead MSOP surface
mount packages. Suppression of undesired funda-
mental and higher order harmonics is 42 dB typical
with respect to input signal level. The doubler utilizes
the same GaAs Schottky diode/balun technology
found in Hittite MMIC mixers. It requires no DC bias
and adds no measurable phase noise onto the multi-
plied signal.
Input = +10 dBm Input = +12 dBm Input = +15 dBm
Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units
Frequency Range, Input 5.5 - 7.5 5.0 - 8.0 4.0 - 8.0 GHz
Frequency Range, Output 11.0 - 15.0 10.0 - 16.0 8.0 - 16.0 GHz
Conversion Loss 17 21 17 22 17 21 dB
FO Isolation
(with respect to input level) 37 42 37 42 39 45 dB
3FO Isolation
(with respect to input level) 37 45 37 45 35 45 dB
4FO Isolation
(with respect to input level) 45 55 40 50 35 45 dB
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQ. MULTIPLIERS - PASSIVE - SMT
7
7 - 31
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC204MS8G / 204MS8GE
Conversion Gain vs.
Temperature @ +15 dBm Drive Level
Conversion Gain
@ +25° vs. Drive Level
Isolation @ +15 dBm Drive Level* Input Return Loss vs. Drive Level
Output Return Loss
*With respect to input level
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 4 - 8 GHz INPUT
v05.0607
-40
-30
-20
-10
0
3456789
+25 C
+85 C
-40 C
CONVERSION GAIN (dB)
INPUT FREQUENCY (GHz)
-20
-15
-10
-5
0
45678
+ 14 dBm
+ 12 dBm
+ 10 dBm
+ 8 dBm
RETURN LOSS (dB)
FREQUENCY (GHz)
-100
-80
-60
-40
-20
0
0 5 10 15 20 25 30 35
Fo
3Fo
4Fo
ISOLATION (dB)
FREQUENCY (GHz)
-20
-16
-12
-8
-4
0
8 10121416
RETURN LOSS (dB)
FREQUENCY (GHz)
-40
-30
-20
-10
0
3456789
+ 8 dBm
+10 dBm
+12 dBm
+15 dBm
CONVERSION GAIN (dB)
INPUT FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQ. MULTIPLIERS - PASSIVE - SMT
7
7 - 32
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Absolute Maximum Ratings
Outline Drawing
Input Drive +27 dBm
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC204MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H204
XXXX
HMC204MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H204
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
HMC204MS8G / 204MS8GE
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 4 - 8 GHz INPUT
v05.0607
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQ. MULTIPLIERS - PASSIVE - SMT
7
7 - 33
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
The circuit board used in the  nal application
should be generated with proper RF circuit design
techniques. Signal lines at the RF port should have
50 ohm impedance and the package ground leads
and exposed ground paddle should be connected
directly to the ground plane similar to that shown
above. The evaluation circuit board shown above is
available from Hittite Microwave Corporation upon
request.
Evaluation PCB
List of Materials for Evaluation PCB 103313 [1]
Item Description
J1, J2 PCB Mount SMA Connector
U1 HMC204MS8G / HMC204MS8GE
PCB [2] 103311 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
HMC204MS8G / 204MS8GE
GaAs MMIC SMT PASSIVE FREQUENCY
DOUBLER, 4 - 8 GHz INPUT
v05.0607
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D