SGL34-20 ... SGL34-100 SGL34-20 ... SGL34-100 Surface Mount Schottky Rectifier Diodes Schottky-Gleichrichterdioden fur die Oberflachenmontage Version 2011-10-10 0.4 0.5 A Repetitive peak reverse voltage Periodische Spitzensperrspannung 20...100 V Plastic case Kunststoffgehause DO-213AA Weight approx. - Gewicht ca. 0.4 Type Typ 3.5 1.6 Nominal current - Nennstrom 0.04g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Dimensions - Mae [mm] Marking: One gray ring denotes "cathode" and "Schottky-Rectifier" The type numbers are noted only on the label on the reel Kennzeichnung: Ein grauer Ring kennzeichnet "Kathode" und "Schottky-Gleichrichter" Die Typenbezeichnungen sind nur auf dem Rollenaufkleber vermerkt Maximum ratings Type Typ Grenzwerte Repetitive peak reverse voltage Periodische Spitzensperrspannung VRRM [V] Surge peak reverse voltage Stospitzensperrspannung VRSM [V] Forward voltage Durchlass-Spannung VF [V] 1) SGL34-20 20 20 < 0.50 SGL34-30 30 30 < 0.50 SGL34-40 40 40 < 0.50 SGL34-50 50 50 < 0.60 SGL34-60 60 60 < 0.60 SGL34-90 90 90 < 0.65 SGL34-100 100 100 < 0.65 Max. average forward rectified current, R-load Dauergrenzstrom in Einwegschaltung mit R-Last TT = 75C IFAV 0.5 A Repetitive peak forward current Periodischer Spitzenstrom f > 15 Hz IFRM 6 A 2) Peak forward surge current, 50/60 Hz half sine-wave Stostrom fur eine 50/60 Hz Sinus-Halbwelle TA = 25C IFSM 10/11 A Rating for fusing - Grenzlastintegral, t < 10 ms TA = 25C i2t 2 A2s Tj -50...+150C -50...+150C Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur 1 2 TS IF = 0.5 A, Tj = 25C Max. temperature of the terminals TT = 100C - Max. Temperatur der Anschlusse TT = 100C (c) Diotec Semiconductor AG http://www.diotec.com/ 1 SGL34-20 ... SGL34-100 Characteristics Kennwerte Leakage current Sperrstrom Tj = 25C Tj = 100C VR = VRRM VR = VRRM IR IR < 0.5 mA < 5.0 mA Junction Capacitance Sperrschichtkapazitat VR = 6 V f = 1 MHz Cj 30 pF Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 150 K/W 1) Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Anschluss RthT < 70 K/W 102 120 [%] [A] 100 SGL34-20...40 10 80 SGL34-50...60 1 60 40 SGL34-90...100 10-1 20 IF IFAV 0 10 Tj = 25C -2 0 TA 50 100 150 [C] 0 1 Rated forward current versus ambient temperature ) Zul. Richtstrom in Abh. von der Umgebungstemp.1) 1 2 VF 0.4 0.6 [V] 1.0 Forward characteristics (typical values) Durchlasskennlinien (typische Werte) Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschluss http://www.diotec.com/ (c) Diotec Semiconductor AG