P Series The Chameleon Adaptable Module for General Purpose, DC Applications UL Recognized CSA Certified VDE Approved* * Approvals pending P Series The DC version of the "P Series" power entry module offers full flexibility of design in the most compact package. It is a general purpose filter specifically designed for DC applications up to 80VDC. This module comes in snap-in or flange mount versions for easy mounting. It also allows for a single or dual fuse option. The DC version of the "P Series" was designed to address the increasing demand for filtering on central office equipment and customer premises equipment, but not restricted to this type of equipment. Some examples include routers, desktop servers and switches multiplexors, aggregators, concentrators, etc. The DC versions of the P Series mates with a standard Molex connector (HCS Series) which is readily available and prevents accidental connection to AC power. Electrical Schematic P 5 Specifications Hipot rating (one minute): line-to-ground line-to-line 2250 VDC 1450 VDC Fuseholder: Accepts one or two fuses* 1/4" x 1-1/4" or 5 x 20 mm Rated voltage (max): 80 VDC Terminals: 0.187" x 0.032" terminal tabs Operating ambient temperature range: -10oC to +40 oC (@ rated current I r ) In an ambient, Ta, higher than +40oC, the maximum operating current, Io, is as follows: I = I 85 - Ta o r 45 *Conversion clip provided on fuseholder for single fuse models. Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Frequency-MHz Rating .03 .1 .15 .5 1 3 5 10 30 3A 6A 10A 44 36 27 50 44 35 32 30 27 7 - 17 8 3 21 12 5 27 17 10 33 23 13 40 32 23 Line-to-line in 50 ohm circuit Current Frequency-MHz Rating .10 .15 .5 1 3 5 10 30 3A 6A 10A 48 42 42 50 55 55 45 45 45 2 2 2 4 4 4 12 12 12 15 15 15 30 22 22 www.cor.com - Libertyville, IL (847) 680-7400 Series P Case Styles Case Dimensions - Filtered Models Metric shown in italics. Metric shown in italics. PE Part No. A B C (max) (max) (max) D E +.008/-.000 +.20/-.00 +.008/-.000 +.20/-.00 PE 1.98 50.3 2.13 54.1 2.31 58.7 1.120 28.45 2.201 55.91 PS 1.24 31.5 2.13 54.1 2.31 58.7 1.120 28.45 2.201 55.91 F 1.575 40.0 Ordering Information Consult your local Corcom sales representative for pricing. PS P S 0 0 0 D D 3 D Shield Options D = Complete shield (DC version) Filter Current 3 = 3 amps 6 = 6 amps X = 10 amps Filter Type D = DC version Fuse Options D = Dual fuse S = Single fuse Recommended Panel Cutout Input Voltage Select 0 = Single voltage Switch Options 0 = No switch Extender Options 0 = None External Edge Mounting Style E = Mounting ears S = Snap-in Note: For snap-in applications, the external edges (installation side) on the "D" sides of the cutout should have a minimum .020" radius. Snap-in models allow front mounting only and are not recommended for plastic panels. For optimal retention against extraction, the corresponding inner edge should be sharp, without paint or coatings. Edge coatings, including anodization are also discouraged for good shield contact. Available Part Numbers PE000DD3D PE000DD6D PE000DDXD PE000SD3D PE000SD6D PE000SDXD DC Connector No. GA210 PS000DD3D PS000DD6D PS000DDXD PS000SD3D PS000SD6D PS000SDXD Mating Connectors Corcom Part Number: GA210 - Custom connector assembly with 2, 36" long 16 gauge wires to mate with P Series filter Molex Component Part Numbers: 03-12-1026 Connector housing to mate with P Series 18-12-1222 Female Terminal (2 needed per housing) Libertyville, IL (847) 680-7400 - www.cor.com P 6