LPS65-M - Astec Semiconductor

Technical Support: (888) 41-ASTEC or (407) 241-2752

Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662

Special Features

60 Watts

LPS60 Series

Medical

Electrical Specs

rev 08.11.04

VDE 0750/EN60601-1 (IEC601) 21310-3336-0015

UL UL2601 E182560

CSA CSA 22.2 No. 601.1 LR109492

CE Mark (LVD)

• Medical safety approvals

• Universal input

• 3” x 5” footprint

• Remote sense

• Built-in EMI filter

• Low output ripple

• Adjustable output

• Overvoltage protection

• Overload protection

• 110 KHz switching frequency

• LPX60 enclosure kit available

Operating temperature: 0° to 50°C ambient

derate each output at 2.5% per degree from 50° to

70°C

Electromagnetic susceptibility: designed to meet

IEC 801, -2, -3, -4, -5, -6, Level 3

Humidity: Operating; non-condensing

5% to 95%

Vibration: Three orthogonal axes, sweep at 1

oct/min, 5 min. dwell at four major resonances

0.75 G peak 5 Hz to 500 Hz, operational

Storage temperature: -40° to 85°C

Temperature coefficient: ±.04% per °C

MTBF demonstrated: >550,000 hours at full load

and 25°C ambient conditions

Input

Input range 85-264 VAC

120-300 VDC

Frequency 47-440 Hz

Inrush current <18 A peak @ 115 VAC;

<36 A peak @ 230 VAC,

cold start @ 25°C

Input current 1.5 A max. (RMS) @ 115 VAC

Efficiency 70% typical at full load

EMI filter FCC Class A conducted

CISPR 22 Class A conducted

EN55022 class A conducted

VDE 0878 PT3 class A conducted

Safety ground leakage

current <75 µA @ 50/60 Hz, 264 VAC input

Output

Maximum power 60 W for convection;

80 W with 30 CFM forced air

Adjustment range -5, +10% minimum

Hold-up time 20 ms @ 60 W load, 115 VAC nominal line

Overload protection Short circuit protection on all outputs.

Case overload protected @ 110-145%

above peak rating

Overvoltage protection 5 V output: 5.7-6.7 VDC. Other outputs

10% to 25% above nominal output

Remote sense Compensates for 0.5 V lead drop min. Will

operate without remote sense connected.

Reverse connection protected.

Environmental

Safety

Total Power: 60-80 Watts

Input Voltage: 85-264 VAC

120-300 VDC

# of Outputs: Single

EUROPE

Astec House, Waterfront Business Park

Merry Hill, Dudley

West Midlands, DY5 1LX, UK

Telephone: 44 (1384) 842-211

Facsimile: 44(1384) 843-355

AMERICAS

5810 Van Allen Way

Carlsbad, CA 92008

Telephone: 760-930-4600

Facsimile: 760-930-0698

www.astecpower.com

Ordering Information

ASIA

Units 2111-2116, Level 21

Tower1, Metroplaza

223, Hing Fong Road

Fwai Fong, New Territories

Hong Kong

Telephone: 852-2437-9662

Facsimile: 852-2402-4426

Model Output Minimum Maximum Load with Maximum Load with Peak Regulation2 Ripple

Number Voltage Load Convection Cooling 30 CFM Forced Air Load1 P/P (PARD)3

LPS63-M 12 V 0 A 5 A 6.7 A 7.5 A ±2% 120 mV

LPS64-M 15 V 0 A 4 A 5.3 A 6 A ±2% 150 mV

LPS65-M 24 V 0 A 2.5 A 3.3 A 3.8 A ±2% 240 mV

1. Peak current lasting <30 seconds with a maximum 10% duty cycle.

2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.

3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.

Connector LPS63-M LPS64-M LPS65-M

SK1-1 Neutral Neutral Neutral

SK1-3 Line Line Line

SK2-1 +12 V +15 V +24 V

SK2-2 +12 V +15 V +24 V

SK2-3 +12 V +15 V +24 V

SK2-4 Common Common Common

SK2-5 Common Common Common

SK2-6 Common Common Common

SK201-1 +Sense +Sense +Sense

SK201-2 -Sense -Sense -Sense

Mating Connectors

AC Input: Molex 09-50-8031 (USA)

09-91-0300 (UK)

PINS: 08-58-0111

DC Outputs: Molex 09-50-8061 (USA)

09-91-0600 (UK)

PINS: 08-58-0111

Remote Sense: Molex 22-01-2025

PINS: 08-50-0114

Astec Connector Kit #70-841-006, includes all of the above.

Notes:

1. Specifications subject to change without notice.

2. All dimensions in inches (mm), tolerance is ±.02”.

3. Mounting holes M1 and M2 should be grounded for EMI purposes.

4. Mounting hole M1 is safety ground connection.

5. Specifications are for convection rating at factory settings at 115 VAC

input, 25°C unless otherwise stated.

6. Warranty: 1 year

7. Weight: 0.75 lb. / 0.34 kg

Pin Assignments

3.00"

(

76.2)

2.55"

(64.8)

0.22"

(5.6)

0.22"

(5.6)

4.56"

(115.8) 5.00"

(127)

1.65"

(41.9)

0.12"

(3)

SK 1

SK 2

0.15" (4)

DIA (4 places)

GND

Remote Sense

Connector

SK201

Voltage

Adj. Pot

Power Derating Curve

Output

Power

(Watts)

0°C

20W

40W

60W

80W

10°C 20°C 30°C 40°C 50°C 60°C 70°C

TA – Ambient Tem

erature – °C

Natural

Convection

Cooling

40W

30W

30 CFM Forced Air Cooling

LPS60 Medical Series