SMT Power Inductor High Current Molded Power Inductor - PA4340.XXXNLT Series Height: 3.0mm Max Footprint: 6.0mm x 5.4mm Max Current Rating: up to 23A Inductance Range: 0.10uH to 33uH Shielded construction and compact design High current, low DCR, and high efficiency Minimized acoustic noise and minimized leakage flux 200Vdc Isolation between terminal and core Electrical Specifications @ 25C - Operating Temperature -55C to +125C Part Number PA4340.101NLT PA4340.201NLT PA4340.221NLT PA4340.331NLT PA4340.471NLT PA4340.681NLT PA4340.102NLT PA4340.122NLT PA4340.152NLT PA4340.222NLT PA4340.332NLT PA4340.472NLT PA4340.562NLT PA4340.682NLT PA4340.103NLT PA4340.153NLT PA4340.183NLT PA4340.223NLT PA4340.333NLT 1 DC Resistance Inductance 100KHz, 1V Rated Current MAX. TYP. Saturation Current Max. uH 0.1030% A 23.0 m 3.0 m 2.5 A 27.0 0.2030% 0.2230% 0.3320% 0.4720% 0.6820% 1.0020% 1.2020% 1.5020% 2.2020% 3.3020% 4.7020% 5.6020% 6.8020% 10.0020% 15.020% 18.020% 22.020% 33.020% 16.0 15.5 14.0 12.0 8.5 7.0 6.5 6.0 5.5 5.0 4.6 4.25 4.0 2.75 2.1 2.0 1.9 1.6 3.2 4.4 5.0 7.4 12.0 14.0 16.0 25.0 35.0 38.0 53.0 63.0 76.2 128.0 190.0 230.0 250.0 440.0 2.6 3.7 4.3 6.4 10.0 13.0 14.0 16.0 25.0 32.0 50.0 55.0 68.0 110.0 165.0 195.0 220.0 380.0 25.0 21.0 18.0 16.0 14.0 11.0 11.0 10.0 9.0 8.0 6.0 4.5 4.3 3.5 2.6 2.3 1.7 1.6 power.pulseelectronics.com P767.H(12/17) P767.G (11/17) http://www.power.pulseelectronics.com/contact SMT Power Inductor High Current Molded Power Inductor - PA4340.XXXNLT Series Notes: 1. Actual temperature of the component during system operation (ambient plus tempera- 3. ture rise) must be within the standard operating range. 2. The saturation current is the current at which the initial inductance drops approximately 30% at the stated ambient temperature. This current is determined by placing the component in the specified ambient environment and applying a short duration pulse cur- 4. rent (to eliminate self-heating effect) to the component. The rated current is the DC current required to raise the component temperature by approximately 40C. Take note that the components' performanc varies depending on the system condition. It is suggested that the component be tested at the system level, to verify the temperature rise of the component during system operation. The part temperature (ambient+temp rise) should not exceed 125C under worst case operating conditions. Circuit design, PCB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. Mechanical PA4340.XXXNLT Final Layout SUGGESTED PAD LAYOUT Series A B C D E F G H PA4340.XXXNLT 6.0 MAX 5.4 MAX 3.0 MAX (1.5) 3.5 MAX (1.8) (2.0) (2.5) All Dimensions in mm. TAPE & REEL INFO E T P2 B OD0 P0 F A W K0 N P1 G SURFACE MOUNTING TYPE, REEL/TAPE LIST REEL SIZE (mm) PA4340.XXXNLT 2 TAPE SIZE (mm) QTY A B G N E F D0 P1 P0 P2 W T K0 PCS/REEL O330 N/A 12 100 1.75 3.5 5.5 1.5 8 4 2 8 12 0.35 3.3 2000 power.pulseelectronics.com P767.H(12/17) P767.G (11/17) http://www.power.pulseelectronics.com/contact SMT Power Inductor High Current Molded Power Inductor - PA4340.XXXNLT Series Typical Performance Curves 3 power.pulseelectronics.com P767.H(12/17) P767.G (11/17) http://www.power.pulseelectronics.com/contact SMT Power Inductor High Current Molded Power Inductor - PA4340.XXXNLT Series 4 power.pulseelectronics.com P767.H(12/17) P767.G (11/17) http://www.power.pulseelectronics.com/contact SMT Power Inductor High Current Molded Power Inductor - PA4340.XXXNLT Series 5 power.pulseelectronics.com P767.H(12/17) P767.G (11/17) http://www.power.pulseelectronics.com/contact SMT Power Inductor High Current Molded Power Inductor - PA4340.XXXNLT Series For More Information Pulse Worldwide Headquarters 15255 Innovation Drive Ste 100 San Diego, CA 92128 U.S.A. Pulse Europe Pulse Electronics GmbH Am Rottland 12 58540 Meinerzhagen Germany Pulse China Headquarters Pulse Electronics (ShenZhen) CO., LTD D708, Shenzhen Academy of Aerospace Technology, The 10th Keji South Road, Nanshan District, Shenzhen, P.R. China 518057 Pulse North China Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Road West Shanghai 200336 China Pulse South Asia 135 Joo Seng Road #03-02 PM Industrial Bldg. Singapore 368363 Pulse North Asia 1F, No.111 Xiyuan Road Zhongli District Taoyuan City 32057 Taiwan (R.O.C) Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 2354 777 100 Fax: 49 2354 777 168 Tel: 86 755 33966678 Fax: 86 755 33966700 Tel: 86 21 62787060 Fax: 86 2162786973 Tel: 65 6287 8998 Fax: 65 6280 0080 Tel: 886 3 4356768 Fax: 886 3 4356820 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2017. Pulse Electronics, Inc. All rights reserved. 6 power.pulseelectronics.com P767.H(12/17) P767.G (11/17) http://www.power.pulseelectronics.com/contact