SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection SDP Biased Series - 5x6 QFN Description This new SDP Biased series provides overvoltage protection for applications such as VDSL2, ADSL2, and "%4- XJUINJOJNBMFGGFDUPOEBUBTJHOBMT5IJTMBUFTU silicon design innovation results in a capacitive loading characteristic that is compatible with these high bandwidth applications. This surface mount QFN package provides a surge capability that exceeds most worldwide standards and recommendations for lightning surge withstand capability of secondary protectors. Features & Benefits Agency Approvals Agency t$PNQBUJCMFXJUI7%4- (30MHz) Agency File Number E133083 t-PXJOTFSUJPOMPTT t-PXQSPmMF t#BMBODFEPWFSWPMUBHF protection t40GPPUQSJOUDPNQBUJCMF t-PXEJTUPSUJPO t'BJMTTIPSUDJSDVJUXIFO surged in excess of ratings Pinout Designation Tip in 1 - Bias Ground Ring in 4 8 Tip out 2 7 3 6 + Bias Ground 5 Ring out Applicable Global Standards Schematic Symbol t5*"" t(3*OUFSCVJMEJOH t5*"# t(3*OUSBCVJMEJOH t*56,&OIBODFE Level t:%5 t*56,#BTJD-FWFM Line In (1) t:%5 t*&$ (8) Line Out -Bias (2) t:%5 (7) +Bias Ground (3) (6) Ground Line In (4) (5) Line Out 8002 tcO snevaH pillihP Electrical Characteristics Part Number Marking SDP0080Q38CB SDP0640Q38CB SDP0720Q38CB SDP0900Q38CB SDP1100Q38CB SDP1300Q38CB SDP1800Q38CB SDP2600Q38CB SDP3100Q38CB SDP3500Q38CB SDP-8C SDP06C SDP07C SDP09C SDP11C SDP13C SDP18C SDP26C SDP31C SDP35C VDRM@IDRM=5A VS@100V/s IH IS IT VT@IT=2.2 Amps V min V max mA min mA max A max V max 6 58 65 75 90 120 170 220 275 320 25 77 88 98 130 160 220 300 350 400 50 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 8 8 8 8 8 8 8 8 8 8 Notes: - Absolute maximum ratings measured at TA= 25C (unless otherwise noted). - Devices are bi-directional (unless otherwise noted). (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 30 Revised: February 22, 2011 Capacitance See Capacitance vs Voltage Chart SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection V-I: Characteristics Capacitance vs. Voltage* +I 40 Bias Voltage 35 IT 0V 5V 24V 50V 30 Capacitance (pF) IS IH IDRM -V +V 3.3V 12V 30V 25 20 15 VDRM VT 10 VS 5 0 0.1 1 10 Line Voltage (V) -I * Bias voltage must be lower than VDRM 50/60Hz Ratings Parameter Name Test Conditions Value Units ITSM Maximum non-reptitive on-state current, 50/60Hz 0.5s 1s 2s 5s 30s 900s 6.5 4.6 3.4 2.3 1.3 0.73 A Surge Ratings ITSM IPP Series C 2x10s 1.2x50s/8x20s 10x700/5x310s 10x1000s 600VRMS 1 cycle A min A min A min A min ARMS 500 400 200 100 30 Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP $ - The device must initially be in thermal equilibrium with -40C < TJ < $ Thermal Considerations Package 5x6 QFN Symbol Parameter Value Unit TJ Junction Temperature UP C TSTG Storage Temperature Range UP C R0JA Thermal Resistance: Junction to Ambient 100 C/W (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 31 Revised: February 22, 2011 100 SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection Normalized DC Holding Current vs. Case Temperature Normalized VS Change vs. Junction Temperature 2.0 10 IH 8 6 25 C 4 1.8 IH (TC = 25C) 12 1.6 1.4 2 0 -4 25C 1.2 1.0 Ratio of Percent of VS Change - % 14 0.8 0.6 -6 0.4 -8 -40 -40 -20 0 -20 20 40 60 80 100 120 140 160 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - C Junction Temperature (TJ) - C Soldering Parameters - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Pb-Free assembly (see Fig. 1) $ $ 60-180 secs. Average ramp up rate (Liquidus Temp (TL) to peak) 3C/sec. Max. TS(max) to TL - Ramp-up Rate 3C/sec. Max. Reflow - Temperature (TL) (Liquidus) - Temperature (tL) Peak Temp (TP) Figure 1 TP TL $ 60-150 secs. Critical Zone TL to TP tL TS(max) Ramp-down Preheat TS(min) tS $ 25 Time within 5C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6C/sec. Max. Time 25C to Peak Temp (TP) 8 min. Max. Do not exceed time to peak temperature (t 25C to peak) $ High Temp Voltage Blocking 80% Rated VDRM (VAC Peak $PS $ 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Temp Cycling $UP $ NJOEXFMM VQUP cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC $ 3) VQUPIST&*" JEDEC, JESD22-A-101 High Temp Storage $IST.*-45% .FUIPE JEDEC, JESD22-A-101 Low Temp Storage -65C, 1008 hrs. Thermal Shock $UP $ NJOEXFMM TFDUSBOTGFS 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Copper Alloy Terminal Finish 100% Matte-Tin Plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Resistance to Solder Heat Moisture Sensitivity Level (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Time Environmental Specifications Physical Specifications Lead Material tP Ramp-up Temperature Reflow Condition 32 Revised: February 22, 2011 $ TFDT.*-45% .FUIPE 3) $ IST SFnPXDZDMFT $1FBL +&%&$+45% -FWFM SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection Dimensions -- 5x6 QFN A 5 I B 6 H D 7 8 K A B C D E F G H I J K L L J E 4 3 I 2 F G PIN 1 INDICATOR PIN 1 & 8: TIP CONNECTIONS PIN 2: BIAS (-) PIN 3 & 6: GROUND CONNECTIONS PIN 4 & 5: RING CONNECTIONS PIN 7: BIAS (+) C Inches Dimension F (REF) G (REF) Millimeters Min Max Min Max 0.187 0.226 0.054 0.165 0.027 0.011 0.047 0.032 0.027 0.100 0.027 0.015 0.207 0.246 0.064 0.171 0.033 0.017 0.053 0.038 0.033 0.106 0.033 0.021 4.745 5.745 1.374 4.199 0.686 0.279 1.194 0.800 0.686 2.540 0.686 0.381 5.253 6.253 1.628 4.351 0.838 0.432 1.346 0.953 0.838 2.692 0.838 0.533 5x6 QFN Solder Pad Layout .0200 .0500 .2920 .2050 .1180 Part Numbering Part Marking SDP xxx 0 Q38 C B TYPE SIDACtor DSL Protector MEDIAN VOLTAGE XXXXXX BIASED Part Marking Code (Refer to Electrical Characteristics Table) IPP RATING XXXXX Date Code PACKAGE TYPE CONSTRUCTION VARIABLE Packing Options Package Type Q38 Description Quantity Added Suffix Industry Standard 5x6x1.5 QFN Tape and Reel Pack 4000 N/A EIA-481-D (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 33 Revised: February 22, 2011 SIDACtor (R) Protection Thyristors Broadband OptimizedTM Protection Tape and Reel Specifications -- 5x6 QFN Reel Dimension Symbols A B C D N W1 A0 B0 D0 D1 E1 E2 C A D N W1 B Tape Leader and Trailer Dimensions END CARRIER TAPE START COVER TAPE F TRAILER 160mm MIN LEADER 400mm MIN K0 P0 P1 Tape Dimension Items D0 P0 P2 T CARRIER TAPE D1 T W B0 F E2 W W0 K0 P2 E1 P1 W0 A0 COVER TAPE (c) 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 34 Revised: February 22, 2011 Description Inches Millimeters Min Max Min Reel Diameter N/A 12.992 N/A Drive Spoke Width 0.059 N/A 1.50 Arbor Hole Diameter 0.504 0.531 12.80 Drive Spoke Diameter 0.795 N/A 20.20 Hub Diameter 1.969 N/A 50.00 Reel Inner Width at Hub 0.488 0.567 12.40 Pocket Width at Bottom 0.204 0.212 5.20 Pocket Length at Bottom 0.244 0.252 6.20 Feed Hole Diameter 0.059 0.063 1.50 Pocket Hole Diameter 0.059 N/A 1.50 Feed Hole Position 1 0.065 0.073 1.65 Feed Hole Position 2 0.400 0.408 10.15 Feed Hole Center 0.212 0.220 5.40 Pocket Hole Center 2 Pocket Depth 0.067 0.075 1.70 Feed Hole Pitch 0.153 0.161 3.90 Component Spacing 0.311 0.319 7.90 Feed Hole Center 0.077 0.081 1.90 Pocket Hole Center 1 Carrier Tape Thickness 0.010 0.014 0.25 Embossed Carrier 0.460 0.484 11.70 Tape Width Cover Tape Width 0.358 0.366 9.10 Max 330.0 N/A 13.50 N/A N/A 14.40 5.40 6.40 1.60 N/A 1.85 10.35 5.60 1.90 4.10 8.10 2.10 0.35 12.30 9.30