Low-profile design with proven
EZ-SCREEN® performance
bannerengineering.com
www.bannerengineering.com
1.888.373.6767
Removable Disconnect Connector with Flying Leads
Model Length Cable Type
RDLP-815D 4.5 m
8-conductor
(22-ga.)
RDLP-825D 8 m
RDLP-850D 15 m
RDLP-875D 23 m
RDLP-8100D 30 m
Removable Disconnect Connector with M12/Euro QD
Model Length Cable Type
DELPE-81D 0.3 m
8-conductor
(22-ga.)
DELPE-83D 1 m
DELPE-88D 2.4 m
DELPE-815D 4.6 m
DELPE-825D 8 m
DELPE-850D 15 m
DELPE-875D 23 m
DELPE-8100D 30 m
Interface Modules
Model Description Data Sheet
IM-T-9A 3 NO redundant-output contacts (6 amp)
62822
IM-T-11A 2 NO redundant-output contacts (6 amp),
plus 1 NC auxiliary
AC Interface Box
• Hard-wired AC Power, Output and EDM Connections
• 8-pin M12/Euro-style QD Emitter/Receiver Connection
Model Outputs EDM Data Sheet
EZAC-R9-QE8 3 NO Selectable 1- or 2-
channel or no EDM 120321
EZAC-R11-QE8 1 NO & 1 NC
Removable Disconnect Connector (Double-Ended): Cascade
cordset with removable disconnects for connection of 2nd, 3rd and 4th sensor in series
Model Length Cable Type
DELP-110E 0.05 m
11-conductor
(24-ga.)
DELP-111E 0.3 m
DELP-113E 1 m
DELP-118E 2.4 m
DELP-1115E 4.5 m
DELP-1125E 8 m
DELP-1150E 15 m
DELP-1175E 23 m
DELP-11100E 30 m
8-Pin M12/Euro QD with Flying Leads
Model Length Cable Type
QDE-815D 4.5 m
8-conductor
(22-ga.)
QDE-825D 8 m
QDE-850D 15 m
QDE-875D 23 m
QDE-8100D 30 m
8-Pin M12/Euro QD (Double-Ended)
Model Length Cable Type
DEE2R-81D 0.3 m
8-conductor
(22-ga.)
DEE2R-83D 1 m
DEE2R-88D 2.4 m
DEE2R-815D 4.5 m
DEE2R-825D 8 m
DEE2R-850D 15 m
DEE2R-875D 23 m
DEE2R-8100D 30 m
8-Pin M12/Euro QD Splitter
Model Branches (Female) Trunk (Male) Cable Type
CSB-M1281M1281
2 x 0.3 m
0.3 m
8-conductor
(22-ga.)
CSB-M1288M1281 2.5 m
CSB-M12815M1281 5 m
CSB-M12825M1281 8 m
CSB-UNT825M1281 8 m unterminated
Banner Engineering Corp.
9714 Tenth Avenue North • Minneapolis, Minnesota 55441 • (763) 544-3164 • Fax: (763) 544-3213
Toll-free: 888-373-6767 • www.bannerengineering.com • Email: sensors@bannerengineering.com
P/N 142815
www.bannerengineering.com
Cordsets
Replacement Parts
Model Description
LPA-TP-1 Terminator plug
DELPE-81D Replacement pigtail for P8 models
SC22-3 Safety Controller
Model* Terminal XM Card Data Sheet
SC22-3-S Screw Yes 133487
SC22-3-C Clamp
* Other models are available (example, USB cable, XM programming, EtherNet IP, and
Modbus TCP).
Mechanically Linked Contactors
Model Description Data Sheet
11-BG00-31-D-024 3 NO, 1 NC (10 amp) 111881
BF1801L-024 3 NO, 1 NC (18 amp)
EZ-SCREEN®: Best-in-Class,
Two-Piece Safety Light Curtains
• Type 4 and Type 2 point-of-operation guarding
• Perimeter and access guards
• Single point for entry/exit
• Cascading models
• Easy setup, alignment and maintenance
• Unique mounting and retrot options
▶
Simple, two-piece integrated design
▶
Superior optical design for easy
system alignment
▶
Convenient setup without a PC,
disassembly or additional devices
▶
Easily congured Reduced
Resolution and Fixed Blanking
▶
External Device Monitoring
▶
Exceeds OSHA/ANSI Control
Reliability requirements, certied
to cULus NIPF, and CE certied to
Type 4, Category 4 PLe and SIL 3
▶
Two solid-state OSSD safety outputs;
includes selectable trip/latch output
▶
User congurable Aux output
▶
Flexible wiring scheme for allowing
“swapable” emitters and receivers
Flexible Cascading
▶
Allows four systems—of any length
and resolution—to be connected in
series, forming a single safety device
▶
Guards multiple sides of
machine, such as L- or
U-shaped conguration
▶
Provides continuous
detection without
overlapping light curtains
or protruding cables
Mounting Versatility
▶
Space-saving design for a perfect t
▶
Brackets included for end mounting or
side mounting with no dead zone
▶
Brackets rotate for ne alignment
▶
Inline and L-brackets for mounting with no
“gap” on 25 mm systems
▶
Optional brackets for mounting inside P1000
Unistrut® metal framing
▶
Multi-directional routing of cables for easy
integration into machinery
▶ Features compact 28 x 26 mm housing
▶ Positions rst and last beam at the ends for
continuous sensing
▶ Includes 14 or 25 mm resolution models
▶ Offers dened areas from 270 to 1810 mm
with detection ranges up to 7 m
▶ Provides response times as fast as
8 milliseconds
The EZ-SCREEN® line of robust safety light curtains now includes models for continuous detection along
the entire light screen length. The space-saving, compact prole of the EZ-SCREEN LP is ideal for smaller
machines, yet robust enough to meet the demands of large power presses. Plus, with several housing
nishes, cascading and many mounting options, EZ-SCREEN LP provides a perfect t for a
wide range of safeguarding applications.
Compact design and flexible mounting options
deliver an exact fit with no dead zone.
▶ Identies blocked beams using zone indicators
▶ Features 7-segment display with diagnostic
information and number of blocked beams
▶ Presents system status and alignment using
highly visible LEDs (bi-color)
▶ Includes models with nickel-plated housing
for ESD-safe applications, clear anodized
aluminum housing or “safety” yellow
powder-coat housing
Safety light screen for
end-to-end detection
EZ-SCREEN® LP
28 mm
26 mm
All standard cordsets are yellow PVC cable with black overmold. For black PVC cable and overmold, add sufx B to model number (example, RDLP-815DB).
Other cordset options available, see EZ-SCREEN LP manual (p/n 140044).
t MMD Muting Modules
Model Description Data Sheet
MMD-TA-12B 2 NO redundant-output contacts (6 amp), plus
1 NC auxiliary 116390
MMD-TA-11B 2 PNP solid-state safety outputs (0.5 amp each)
Standard EZ-SCREEN LP Models, 24V dc @ 210 mA
Defined Area 25 mm Resolution Models* Connection Response
Time
Emitter Receiver Pair
270 mm SLPE25-270P8 SLPR25-270P8 SLPP25-270P88 M12/Euro Pigtail QD 8 ms
SLPE25-270 SLPR25-270 SLPP25-270 Integral RD
410 mm SLPE25-410P8 SLPR25-410P8 SLPP25-410P88 M12/Euro Pigtail QD 9.5 ms
SLPE25-410 SLPR25-410 SLPP25-410 Integral RD
550 mm SLPE25-550P8 SLPR25-550P8 SLPP25-550P88 M12/Euro Pigtail QD 11 ms
SLPE25-550 SLPR25-550 SLPP25-550 Integral RD
690 mm SLPE25-690P8 SLPR25-690P8 SLPP25-690P88 M12/Euro Pigtail QD 12.5 ms
SLPE25-690 SLPR25-690 SLPP25-690 Integral RD
830 mm SLPE25-830P8 SLPR25-830P8 SLPP25-830P88 M12/Euro Pigtail QD 14 ms
SLPE25-830 SLPR25-830 SLPP25-830 Integral RD
970 mm SLPE25-970P8 SLPR25-970P8 SLPP25-970P88 M12/Euro Pigtail QD 15.5 ms
SLPE25-970 SLPR25-970 SLPP25-970 Integral RD
1110 mm SLPE25-1110P8 SLPR25-1110P8 SLPP25-1110P88 M12/Euro Pigtail QD 17 ms
SLPE25-1110 SLPR25-1110 SLPP25-1110 Integral RD
1250 mm SLPE25-1250P8 SLPR25-1250P8 SLPP25-1250P88 M12/Euro Pigtail QD 18.5 ms
SLPE25-1250 SLPR25-1250 SLPP25-1250 Integral RD
1390 mm SLPE25-1390P8 SLPR25-1390P8 SLPP25-1390P88 M12/Euro Pigtail QD 20 ms
SLPE25-1390 SLPR25-1390 SLPP25-1390 Integral RD
1530 mm SLPE25-1530P8 SLPR25-1530P8 SLPP25-1530P88 M12/Euro Pigtail QD 21 ms
SLPE25-1530 SLPR25-1530 SLPP25-1530 Integral RD
1670 mm SLPE25-1670P8 SLPR25-1670P8 SLPP25-1670P88 M12/Euro Pigtail QD 22.5 ms
SLPE25-1670 SLPR25-1670 SLPP25-1670 Integral RD
1810 mm SLPE25-1810P8 SLPR25-1810P8 SLPP25-1810P88 M12/Euro Pigtail QD 24 ms
SLPE25-1810 SLPR25-1810 SLPP25-1810 Integral RD
* Only 25 mm resolution models are listed. For 14 mm resolution, replace 25 with 14 in model number (example, SLPE14-270P8).
Only standard yellow housing models are listed. The 300 mm pigtail has yellow PVC cable with black PVC QD overmold.
Connections
300 mm 8-pin M12/Euro Pigtail QD
Order mating M12/Euro QD
cordset separately: QDE,
DEE2R or CSB; see page 4
Integral Removable Disconnect (RD)
Order RDLP, DELPE or
DELP separately;
see page 4
RD to RD
Requires DELP (connection of 2nd,
3rd and 4th sensors in a cascade);
see page 4
Space-saving design installs
perfectly in machinery, eliminating
protruding light screens.
Included side brackets allow
no dead zone with continuous
sensing along entire length.
Included end brackets
provide 360˚ mounting.
Multi-directional
cables can be routed
in any direction.
Flexible cables with a
5 mm bending radius
provide interference-
free routing.
Low-prole mounting
saves valuable space.
LEDs and 7-segment display
indicate system status,
alignment and blocked beams.
Up to four units
can be connected in series
without protruding cables.
Cascading models in
L- or U-shaped conguration
provide continuous sensing.
Fixed-angle brackets allow
end-to-end, L- or U-shaped, and
angled setup without overlapping
and maintain 25 mm resolution.
LPA-MBK-11 (Standard) LPA-MBK-12 (Standard) LPA-MBK-20 LPA-MBK-22
• End-cap bracket kit
• 360˚ sensor rotation
• 14-ga. (1.9 mm) steel, black zinc
plated; die-cast zinc plate
• Flanges can be
mounted “In”
or “Out”
• Includes 2 brackets
and hardware
• Side-mount bracket kit
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm) steel,
black zinc plated;
die-cast
zinc clamp
• Includes 1 bracket
and hardware
• Universal adapter bracket for
mounting to engineered/slotted
aluminum framing (example,
80/20™, Bosch)
• Use with other
LPA-MBK-xx
brackets
• 12-ga (2.66 mm)
steel, black
zinc plated
• Includes 1 bracket
and hardware
• End-cap bracket for mounting
sensor inside Unistrut® metal
framing
• Fits Unistrut® P1000 size
(15/8"), with M6 or
¼" channel nuts
• 14-ga. (1.9 mm)
steel, black zinc
plated; die-cast
zinc clamp
• Includes 2 brackets
and hardware
LPA-MBK-21 LPA-MBK-180 LPA-MBK-135 LPA-MBK-120 LPA-MBK-90
• Pivoting L-bracket
• Adjustable 90˚ to 180˚
orientation
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm)
steel, black
zinc plated
• Inline bracket
• Fixed 180˚ orientation
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm)
steel, black
zinc plated
• Angled L-bracket
• Fixed 135˚ orientation
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm)
steel, black
zinc plated
• Angled L-bracket
• Fixed 120˚ orientation
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm)
steel, black
zinc plated
• Angled L-bracket
• Fixed 90˚ orientation
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm)
steel, black
zinc plated
Cascade EZ-SCREEN® LP Models, 24V dc @ 210 mA
Defined Area 25 mm Resolution Models* Connection Response
Time
Emitter Receiver Pair
410 mm SLPCE25-410P8 SLPCR25-410P8 SLPCP25-410P88 M12/Euro Pigtail QD 9.5 ms
SLPCE25-410 SLPCR25-410 SLPCP25-410 Integral RD
550 mm SLPCE25-550P8 SLPCR25-550P8 SLPCP25-550P88 M12/Euro Pigtail QD 11 ms
SLPCE25-550 SLPCR25-550 SLPCP25-550 Integral RD
690 mm SLPCE25-690P8 SLPCR25-690P8 SLPCP25-690P88 M12/Euro Pigtail QD 12.5 ms
SLPCE25-690 SLPCR25-690 SLPCP25-690 Integral RD
830 mm SLPCE25-830P8 SLPCR25-830P8 SLPCP25-830P88 M12/Euro Pigtail QD 14 ms
SLPCE25-830 SLPCR25-830 SLPCP25-830 Integral RD
970 mm SLPCE25-970P8 SLPCR25-970P8 SLPCP25-970P88 M12/Euro Pigtail QD 15.5 ms
SLPCE25-970 SLPCR25-970 SLPCP25-970 Integral RD
1110 mm SLPCE25-1110P8 SLPCR25-1110P8 SLPCP25-1110P88 M12/Euro Pigtail QD 17 ms
SLPCE25-1110 SLPCR25-1110 SLPCP25-1110 Integral RD
1250 mm SLPCE25-1250P8 SLPCR25-1250P8 SLPCP25-1250P88 M12/Euro Pigtail QD 18.5 ms
SLPCE25-1250 SLPCR25-1250 SLPCP25-1250 Integral RD
1390 mm SLPCE25-1390P8 SLPCR25-1390P8 SLPCP25-1390P88 M12/Euro Pigtail QD 20 ms
SLPCE25-1390 SLPCR25-1390 SLPCP25-1390 Integral RD
1530 mm SLPCE25-1530P8 SLPCR25-1530P8 SLPCP25-1530P88 M12/Euro Pigtail QD 21 ms
SLPCE25-1530 SLPCR25-1530 SLPCP25-1530 Integral RD
1670 mm SLPCE25-1670P8 SLPCR25-1670P8 SLPCP25-1670P88 M12/Euro Pigtail QD 22.5 ms
SLPCE25-1670 SLPCR25-1670 SLPCP25-1670 Integral RD
1810 mm SLPCE25-1810P8 SLPCR25-1810P8 SLPCP25-1810P88 M12/Euro Pigtail QD 24 ms
SLPCE25-1810 SLPCR25-1810 SLPCP25-1810 Integral RD
* Only 25 mm resolution models are listed. For 14 mm resolution, replace 25 with 14 in model number (example, SLPCE14-270P8).
Only standard yellow housing models are listed. The 300 mm pigtail has yellow PVC cable with black PVC QD overmold.
270 mm defined area is not available in cascade model. A standard SLP..-270.. model can be used at the end of a cascade system.
Cascade BracketsStandard and Optional Brackets
Cascade brackets join two cascaded emitters or receivers. Each model number is one set of two brackets.
To Order:
1 Choose model, dened area and resolution (14 or 25 mm).
2 Choose an Emitter (E), a Receiver (R) or a Pair (P).†
3 Yellow housing is standard. To choose an optional housing,
add an A or N prior to the connection designation:
• A for anodized aluminum (clear) nish with black
end caps (example, SLPE25-270A).† †
• N for ESD-safe models with a nickel-plated housing and
end caps (example, SLPE25-270N).† †
4 Choose the connection: 300 mm M12/Euro Pigtail QD or
integral Removable Disconnect (RD). See connections to left.
EZ-SCREEN® LP System Model Guide
More information online at bannerengineering.com
A = Anodized Aluminum
N = ESD-safe Nickel-plated
(Blank) = Standard Yellow
Config- Reso- Defined Housing
Model uration lution Area Option Connection
E = Emitter
R = Receiver
P = Pair
270 mm
410 mm
550 mm
690 mm
830 mm
970 mm
1110 mm
1250 mm
1390 mm
1530 mm
1670 mm
1810 mm
SLP = Standard LP
SLPC = Cascade LP
P8 = M12/Euro
Pigtail QD
P88 = M12/Euro
Pigtail QD (Pair)
(Blank) = Integral RD
14 = 14 mm
25 = 25 mm
SLP E 25 – 410 A P8
† Kit options are available. See EZ-SCREEN LP manual (p/n 140044),
the Banner Safety Catalog or www.bannerengineering.com for complete
information, a current listing of accessories and options for kitting
components. Call factory with questions regarding accessories.
† † Optional housings with Pigtail QD models have a black 300 mm PVC
cable and QD overmold.
5 Choose one cordset for each sensor or two cordsets for a
pair. See page 4:
• M12/Euro Pigtail QD models (example, SLP..-270P8)
require mating 8-pin M12/Euro QD cordsets, such as:
- QDE cordset with ying leads
- DEE2R double-ended cordset
- CSB series splitter cordset
• Integral RD models (example, SLP..-270) require
mating cordsets, such as:
- RDLP cordset with ying leads
- DELPE double-ended cordset with M12/Euro QD
(requires additional mating 8-pin M12/Euro QD cordsets)
- DELP cordset in cascade applications for
connection of 2nd, 3rd and 4th sensors
6 Choose an optional interfacing solution, such as an
IM-T-9A or -11A interfacing model. See page 4.
Standard EZ-SCREEN LP Models, 24V dc @ 210 mA
Defined Area 25 mm Resolution Models* Connection Response
Time
Emitter Receiver Pair
270 mm SLPE25-270P8 SLPR25-270P8 SLPP25-270P88 M12/Euro Pigtail QD 8 ms
SLPE25-270 SLPR25-270 SLPP25-270 Integral RD
410 mm SLPE25-410P8 SLPR25-410P8 SLPP25-410P88 M12/Euro Pigtail QD 9.5 ms
SLPE25-410 SLPR25-410 SLPP25-410 Integral RD
550 mm SLPE25-550P8 SLPR25-550P8 SLPP25-550P88 M12/Euro Pigtail QD 11 ms
SLPE25-550 SLPR25-550 SLPP25-550 Integral RD
690 mm SLPE25-690P8 SLPR25-690P8 SLPP25-690P88 M12/Euro Pigtail QD 12.5 ms
SLPE25-690 SLPR25-690 SLPP25-690 Integral RD
830 mm SLPE25-830P8 SLPR25-830P8 SLPP25-830P88 M12/Euro Pigtail QD 14 ms
SLPE25-830 SLPR25-830 SLPP25-830 Integral RD
970 mm SLPE25-970P8 SLPR25-970P8 SLPP25-970P88 M12/Euro Pigtail QD 15.5 ms
SLPE25-970 SLPR25-970 SLPP25-970 Integral RD
1110 mm SLPE25-1110P8 SLPR25-1110P8 SLPP25-1110P88 M12/Euro Pigtail QD 17 ms
SLPE25-1110 SLPR25-1110 SLPP25-1110 Integral RD
1250 mm SLPE25-1250P8 SLPR25-1250P8 SLPP25-1250P88 M12/Euro Pigtail QD 18.5 ms
SLPE25-1250 SLPR25-1250 SLPP25-1250 Integral RD
1390 mm SLPE25-1390P8 SLPR25-1390P8 SLPP25-1390P88 M12/Euro Pigtail QD 20 ms
SLPE25-1390 SLPR25-1390 SLPP25-1390 Integral RD
1530 mm SLPE25-1530P8 SLPR25-1530P8 SLPP25-1530P88 M12/Euro Pigtail QD 21 ms
SLPE25-1530 SLPR25-1530 SLPP25-1530 Integral RD
1670 mm SLPE25-1670P8 SLPR25-1670P8 SLPP25-1670P88 M12/Euro Pigtail QD 22.5 ms
SLPE25-1670 SLPR25-1670 SLPP25-1670 Integral RD
1810 mm SLPE25-1810P8 SLPR25-1810P8 SLPP25-1810P88 M12/Euro Pigtail QD 24 ms
SLPE25-1810 SLPR25-1810 SLPP25-1810 Integral RD
* Only 25 mm resolution models are listed. For 14 mm resolution, replace 25 with 14 in model number (example, SLPE14-270P8).
Only standard yellow housing models are listed. The 300 mm pigtail has yellow PVC cable with black PVC QD overmold.
Connections
300 mm 8-pin M12/Euro Pigtail QD
Order mating M12/Euro QD
cordset separately: QDE,
DEE2R or CSB; see page 4
Integral Removable Disconnect (RD)
Order RDLP, DELPE or
DELP separately;
see page 4
RD to RD
Requires DELP (connection of 2nd,
3rd and 4th sensors in a cascade);
see page 4
Space-saving design installs
perfectly in machinery, eliminating
protruding light screens.
Included side brackets allow
no dead zone with continuous
sensing along entire length.
Included end brackets
provide 360˚ mounting.
Multi-directional
cables can be routed
in any direction.
Flexible cables with a
5 mm bending radius
provide interference-
free routing.
Low-prole mounting
saves valuable space.
LEDs and 7-segment display
indicate system status,
alignment and blocked beams.
Up to four units
can be connected in series
without protruding cables.
Cascading models in
L- or U-shaped conguration
provide continuous sensing.
Fixed-angle brackets allow
end-to-end, L- or U-shaped, and
angled setup without overlapping
and maintain 25 mm resolution.
LPA-MBK-11 (Standard) LPA-MBK-12 (Standard) LPA-MBK-20 LPA-MBK-22
• End-cap bracket kit
• 360˚ sensor rotation
• 14-ga. (1.9 mm) steel, black zinc
plated; die-cast zinc plate
• Flanges can be
mounted “In”
or “Out”
• Includes 2 brackets
and hardware
• Side-mount bracket kit
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm) steel,
black zinc plated;
die-cast
zinc clamp
• Includes 1 bracket
and hardware
• Universal adapter bracket for
mounting to engineered/slotted
aluminum framing (example,
80/20™, Bosch)
• Use with other
LPA-MBK-xx
brackets
• 12-ga (2.66 mm)
steel, black
zinc plated
• Includes 1 bracket
and hardware
• End-cap bracket for mounting
sensor inside Unistrut® metal
framing
• Fits Unistrut® P1000 size
(15/8"), with M6 or
¼" channel nuts
• 14-ga. (1.9 mm)
steel, black zinc
plated; die-cast
zinc clamp
• Includes 2 brackets
and hardware
LPA-MBK-21 LPA-MBK-180 LPA-MBK-135 LPA-MBK-120 LPA-MBK-90
• Pivoting L-bracket
• Adjustable 90˚ to 180˚
orientation
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm)
steel, black
zinc plated
• Inline bracket
• Fixed 180˚ orientation
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm)
steel, black
zinc plated
• Angled L-bracket
• Fixed 135˚ orientation
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm)
steel, black
zinc plated
• Angled L-bracket
• Fixed 120˚ orientation
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm)
steel, black
zinc plated
• Angled L-bracket
• Fixed 90˚ orientation
• +10˚/-30˚ sensor rotation
• 14-ga. (1.9 mm)
steel, black
zinc plated
Cascade EZ-SCREEN® LP Models, 24V dc @ 210 mA
Defined Area 25 mm Resolution Models* Connection Response
Time
Emitter Receiver Pair
410 mm SLPCE25-410P8 SLPCR25-410P8 SLPCP25-410P88 M12/Euro Pigtail QD 9.5 ms
SLPCE25-410 SLPCR25-410 SLPCP25-410 Integral RD
550 mm SLPCE25-550P8 SLPCR25-550P8 SLPCP25-550P88 M12/Euro Pigtail QD 11 ms
SLPCE25-550 SLPCR25-550 SLPCP25-550 Integral RD
690 mm SLPCE25-690P8 SLPCR25-690P8 SLPCP25-690P88 M12/Euro Pigtail QD 12.5 ms
SLPCE25-690 SLPCR25-690 SLPCP25-690 Integral RD
830 mm SLPCE25-830P8 SLPCR25-830P8 SLPCP25-830P88 M12/Euro Pigtail QD 14 ms
SLPCE25-830 SLPCR25-830 SLPCP25-830 Integral RD
970 mm SLPCE25-970P8 SLPCR25-970P8 SLPCP25-970P88 M12/Euro Pigtail QD 15.5 ms
SLPCE25-970 SLPCR25-970 SLPCP25-970 Integral RD
1110 mm SLPCE25-1110P8 SLPCR25-1110P8 SLPCP25-1110P88 M12/Euro Pigtail QD 17 ms
SLPCE25-1110 SLPCR25-1110 SLPCP25-1110 Integral RD
1250 mm SLPCE25-1250P8 SLPCR25-1250P8 SLPCP25-1250P88 M12/Euro Pigtail QD 18.5 ms
SLPCE25-1250 SLPCR25-1250 SLPCP25-1250 Integral RD
1390 mm SLPCE25-1390P8 SLPCR25-1390P8 SLPCP25-1390P88 M12/Euro Pigtail QD 20 ms
SLPCE25-1390 SLPCR25-1390 SLPCP25-1390 Integral RD
1530 mm SLPCE25-1530P8 SLPCR25-1530P8 SLPCP25-1530P88 M12/Euro Pigtail QD 21 ms
SLPCE25-1530 SLPCR25-1530 SLPCP25-1530 Integral RD
1670 mm SLPCE25-1670P8 SLPCR25-1670P8 SLPCP25-1670P88 M12/Euro Pigtail QD 22.5 ms
SLPCE25-1670 SLPCR25-1670 SLPCP25-1670 Integral RD
1810 mm SLPCE25-1810P8 SLPCR25-1810P8 SLPCP25-1810P88 M12/Euro Pigtail QD 24 ms
SLPCE25-1810 SLPCR25-1810 SLPCP25-1810 Integral RD
* Only 25 mm resolution models are listed. For 14 mm resolution, replace 25 with 14 in model number (example, SLPCE14-270P8).
Only standard yellow housing models are listed. The 300 mm pigtail has yellow PVC cable with black PVC QD overmold.
270 mm defined area is not available in cascade model. A standard SLP..-270.. model can be used at the end of a cascade system.
Cascade BracketsStandard and Optional Brackets
Cascade brackets join two cascaded emitters or receivers. Each model number is one set of two brackets.
To Order:
1 Choose model, dened area and resolution (14 or 25 mm).
2 Choose an Emitter (E), a Receiver (R) or a Pair (P).†
3 Yellow housing is standard. To choose an optional housing,
add an A or N prior to the connection designation:
• A for anodized aluminum (clear) nish with black
end caps (example, SLPE25-270A).† †
• N for ESD-safe models with a nickel-plated housing and
end caps (example, SLPE25-270N).† †
4 Choose the connection: 300 mm M12/Euro Pigtail QD or
integral Removable Disconnect (RD). See connections to left.
EZ-SCREEN® LP System Model Guide
More information online at bannerengineering.com
A = Anodized Aluminum
N = ESD-safe Nickel-plated
(Blank) = Standard Yellow
Config- Reso- Defined Housing
Model uration lution Area Option Connection
E = Emitter
R = Receiver
P = Pair
270 mm
410 mm
550 mm
690 mm
830 mm
970 mm
1110 mm
1250 mm
1390 mm
1530 mm
1670 mm
1810 mm
SLP = Standard LP
SLPC = Cascade LP
P8 = M12/Euro
Pigtail QD
P88 = M12/Euro
Pigtail QD (Pair)
(Blank) = Integral RD
14 = 14 mm
25 = 25 mm
SLP E 25 – 410 A P8
† Kit options are available. See EZ-SCREEN LP manual (p/n 140044),
the Banner Safety Catalog or www.bannerengineering.com for complete
information, a current listing of accessories and options for kitting
components. Call factory with questions regarding accessories.
† † Optional housings with Pigtail QD models have a black 300 mm PVC
cable and QD overmold.
5 Choose one cordset for each sensor or two cordsets for a
pair. See page 4:
• M12/Euro Pigtail QD models (example, SLP..-270P8)
require mating 8-pin M12/Euro QD cordsets, such as:
- QDE cordset with ying leads
- DEE2R double-ended cordset
- CSB series splitter cordset
• Integral RD models (example, SLP..-270) require
mating cordsets, such as:
- RDLP cordset with ying leads
- DELPE double-ended cordset with M12/Euro QD
(requires additional mating 8-pin M12/Euro QD cordsets)
- DELP cordset in cascade applications for
connection of 2nd, 3rd and 4th sensors
6 Choose an optional interfacing solution, such as an
IM-T-9A or -11A interfacing model. See page 4.
Low-profile design with proven
EZ-SCREEN® performance
bannerengineering.com
www.bannerengineering.com
1.888.373.6767
Removable Disconnect Connector with Flying Leads
Model Length Cable Type
RDLP-815D 4.5 m
8-conductor
(22-ga.)
RDLP-825D 8 m
RDLP-850D 15 m
RDLP-875D 23 m
RDLP-8100D 30 m
Removable Disconnect Connector with M12/Euro QD
Model Length Cable Type
DELPE-81D 0.3 m
8-conductor
(22-ga.)
DELPE-83D 1 m
DELPE-88D 2.4 m
DELPE-815D 4.6 m
DELPE-825D 8 m
DELPE-850D 15 m
DELPE-875D 23 m
DELPE-8100D 30 m
Interface Modules
Model Description Data Sheet
IM-T-9A 3 NO redundant-output contacts (6 amp)
62822
IM-T-11A 2 NO redundant-output contacts (6 amp),
plus 1 NC auxiliary
AC Interface Box
• Hard-wired AC Power, Output and EDM Connections
• 8-pin M12/Euro-style QD Emitter/Receiver Connection
Model Outputs EDM Data Sheet
EZAC-R9-QE8 3 NO Selectable 1- or 2-
channel or no EDM 120321
EZAC-R11-QE8 1 NO & 1 NC
Removable Disconnect Connector (Double-Ended): Cascade
cordset with removable disconnects for connection of 2nd, 3rd and 4th sensor in series
Model Length Cable Type
DELP-110E 0.05 m
11-conductor
(24-ga.)
DELP-111E 0.3 m
DELP-113E 1 m
DELP-118E 2.4 m
DELP-1115E 4.5 m
DELP-1125E 8 m
DELP-1150E 15 m
DELP-1175E 23 m
DELP-11100E 30 m
8-Pin M12/Euro QD with Flying Leads
Model Length Cable Type
QDE-815D 4.5 m
8-conductor
(22-ga.)
QDE-825D 8 m
QDE-850D 15 m
QDE-875D 23 m
QDE-8100D 30 m
8-Pin M12/Euro QD (Double-Ended)
Model Length Cable Type
DEE2R-81D 0.3 m
8-conductor
(22-ga.)
DEE2R-83D 1 m
DEE2R-88D 2.4 m
DEE2R-815D 4.5 m
DEE2R-825D 8 m
DEE2R-850D 15 m
DEE2R-875D 23 m
DEE2R-8100D 30 m
8-Pin M12/Euro QD Splitter
Model Branches (Female) Trunk (Male) Cable Type
CSB-M1281M1281
2 x 0.3 m
0.3 m
8-conductor
(22-ga.)
CSB-M1288M1281 2.5 m
CSB-M12815M1281 5 m
CSB-M12825M1281 8 m
CSB-UNT825M1281 8 m unterminated
Banner Engineering Corp.
9714 Tenth Avenue North • Minneapolis, Minnesota 55441 • (763) 544-3164 • Fax: (763) 544-3213
Toll-free: 888-373-6767 • www.bannerengineering.com • Email: sensors@bannerengineering.com
P/N 142815
www.bannerengineering.com
Cordsets
Replacement Parts
Model Description
LPA-TP-1 Terminator plug
DELPE-81D Replacement pigtail for P8 models
SC22-3 Safety Controller
Model* Terminal XM Card Data Sheet
SC22-3-S Screw Yes 133487
SC22-3-C Clamp
* Other models are available (example, USB cable, XM programming, EtherNet IP, and
Modbus TCP).
Mechanically Linked Contactors
Model Description Data Sheet
11-BG00-31-D-024 3 NO, 1 NC (10 amp) 111881
BF1801L-024 3 NO, 1 NC (18 amp)
EZ-SCREEN®: Best-in-Class,
Two-Piece Safety Light Curtains
• Type 4 and Type 2 point-of-operation guarding
• Perimeter and access guards
• Single point for entry/exit
• Cascading models
• Easy setup, alignment and maintenance
• Unique mounting and retrot options
▶
Simple, two-piece integrated design
▶
Superior optical design for easy
system alignment
▶
Convenient setup without a PC,
disassembly or additional devices
▶
Easily congured Reduced
Resolution and Fixed Blanking
▶
External Device Monitoring
▶
Exceeds OSHA/ANSI Control
Reliability requirements, certied
to cULus NIPF, and CE certied to
Type 4, Category 4 PLe and SIL 3
▶
Two solid-state OSSD safety outputs;
includes selectable trip/latch output
▶
User congurable Aux output
▶
Flexible wiring scheme for allowing
“swapable” emitters and receivers
Flexible Cascading
▶
Allows four systems—of any length
and resolution—to be connected in
series, forming a single safety device
▶
Guards multiple sides of
machine, such as L- or
U-shaped conguration
▶
Provides continuous
detection without
overlapping light curtains
or protruding cables
Mounting Versatility
▶
Space-saving design for a perfect t
▶
Brackets included for end mounting or
side mounting with no dead zone
▶
Brackets rotate for ne alignment
▶
Inline and L-brackets for mounting with no
“gap” on 25 mm systems
▶
Optional brackets for mounting inside P1000
Unistrut® metal framing
▶
Multi-directional routing of cables for easy
integration into machinery
▶ Features compact 28 x 26 mm housing
▶ Positions rst and last beam at the ends for
continuous sensing
▶ Includes 14 or 25 mm resolution models
▶ Offers dened areas from 270 to 1810 mm
with detection ranges up to 7 m
▶ Provides response times as fast as
8 milliseconds
The EZ-SCREEN® line of robust safety light curtains now includes models for continuous detection along
the entire light screen length. The space-saving, compact prole of the EZ-SCREEN LP is ideal for smaller
machines, yet robust enough to meet the demands of large power presses. Plus, with several housing
nishes, cascading and many mounting options, EZ-SCREEN LP provides a perfect t for a
wide range of safeguarding applications.
Compact design and flexible mounting options
deliver an exact fit with no dead zone.
▶ Identies blocked beams using zone indicators
▶ Features 7-segment display with diagnostic
information and number of blocked beams
▶ Presents system status and alignment using
highly visible LEDs (bi-color)
▶ Includes models with nickel-plated housing
for ESD-safe applications, clear anodized
aluminum housing or “safety” yellow
powder-coat housing
Safety light screen for
end-to-end detection
EZ-SCREEN® LP
28 mm
26 mm
All standard cordsets are yellow PVC cable with black overmold. For black PVC cable and overmold, add sufx B to model number (example, RDLP-815DB).
Other cordset options available, see EZ-SCREEN LP manual (p/n 140044).
t MMD Muting Modules
Model Description Data Sheet
MMD-TA-12B 2 NO redundant-output contacts (6 amp), plus
1 NC auxiliary 116390
MMD-TA-11B 2 PNP solid-state safety outputs (0.5 amp each)